DRUG DELIVERY
·
2019
·
IF 3.829
Yanfei Tao,Fei Yang,Kuiyu Meng,Dongmei Chen,Yujuan Yang,Kaixiang Zhou,Wanhe Luo,Wei Qu,Yuanhu Pan,Zonghui Yuan,Shuyu Xie
In our previous study, enrofloxacin-loaded docosanoic acid solid lipid nanoparticles (SLNs) could be effectively delivered to cells in vitro. In this study, its properties and exploitation as possible oral and intramuscular sustained release formulations for pigs were studied after being made into suspension. The re-dispersed time and sedimentation rate of the nanosuspension were 55 s and 1, respectively. It showed good stability when stored away from light and sustained release in pH = 7.4 PBS buffer. The suspension exhibited no irritation at the injection site and good palatability. Compared with commercial injection and soluble powder, the nanosuspension increased the bioavailability of enrofloxacin by 1.63 and 2.38 folds, and extended the mean residence time (MRT) of the drug from 11.27 and 12.33 to 37.76 and 35.15 h after intragastric and intramuscular administration, respectively. These results suggest that docosanoic acid SLN suspension (DAS) might be a promising oral and intramuscular sustained release formulation to enhance the pharmacological activity of enrofloxacin.
研究领域:
兽医学
·
药物递送系统
·
药剂学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Xiaowei Kong,Xiaoliang Zhou,Yu Tian,Xiaoyan Wu,Jun Zhang,Wei Zuo
Development of cost-effective and efficient electrochemical catalysts for the fuel cells electrode is of prime importance to emerging renewable energy technologies . Here, we report for the first time the novel La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3−δ (LCFNb) perovskite with good potentiality for the electrode material of the symmetrical solid oxide fuel cells (SSOFC). The Sc 0.2 Zr 0.8 O 2−δ (SSZ) electrolyte supported symmetrical cells with impregnated LCFNb and LCFNb/SDC (Ce 0.8 Sm 0.2 O 2−δ ) electrodes achieve relatively high power outputs with maximum power densities (MPDs) reaching up to 392 and 528.6 mW cm −2 at 850 °C in dry H 2 , respectively, indicating the excellent electro-catalytic activity of LCFNb towards both hydrogen oxidation and oxygen reduction. Besides, the MPDs of the symmetrical cells with LCFNb/SDC composite electrodes in CO and syngas (CO: H 2 = 1:1) are almost identical to those in H 2 , implying that LCFNb material has similar catalytic activities to carbon monoxide compared with hydrogen. High durability in both H 2 , CO and syngas during the short term stability tests for 50 h are also obtained, showing desirable structure stability, and carbon deposition resistance of LCFNb based electrodes. The present results indicate that the LCFNb perovskite with remarkable cell performance is a promising electrode material for symmetrical SOFCs.
研究领域:
材料科学
·
电化学
·
能源材料
·
燃料电池
·
催化化学
✓ 已验证
DOI
高影响因子
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
·
2020
·Vol. 37
·期 8
·2000164
·
IF 3.099
Liwei Su,Linhui Liu,Jinpei Hei,Huan Chen,Lianbang Wang,Yuanhao Wang,Manman Ren
V 2 O 5 , as a lithium-free cathode material, has inherent defects such as sluggish kinetics and volume change and, at the same time, requires a lithium metal anode that tends to form dendrites in liquid electrolytes. Both the lithium dendrite and the flammable electrolyte solvent bring longtime safety issues. This work introduces nonflammable inorganic–organic composite solid electrolyte to inhibit the growth of the lithium dendrite and suppress the instability caused by V 2 O 5 nanometerization. However, the long-term cycling and rate performances are still insufficient even when reducing V 2 O 5 size to about 50 nm. As an improvement, sub-10 nm V 2 O 5 /C nanosheets are designed and prepared using corn stalks as precursors through simple impregnation and calcination process. The V 2 O 5 /C offers a much better electrode/electrolyte contact and interface stability than bulk V 2 O 5 and commercial V 2 O 5 in the inorganic–organic composite solid electrolyte. The discharge capacity is 228 mAh g −1 at 0.1 C after 50 cycles and ≈110 mAh g −1 at 2.0 C.
研究领域:
材料科学
·
电化学
·
纳米能源
·
固态电池
·
电极材料设计
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Limin Liu,Yong Wang,Xiaoliang Zhou,Yixuan Yang,Chao Ma,Yuan Li,Chen Wang,Xiaohong Zhao,Bin Li
A cermet fuel electrode Cu/Ce 0.6 Mn 0.3 Fe 0.1 O 2-δ (Cu/CMF) is proposed for a reversible solid oxide electrochemical cell (SOC) with CO/CO 2 as the shuttle. Cu is inert for the carbon deposition and CMF is electrochemically active for CO oxidation and CO 2 reduction. The electrode polarization resistances in CO at 700, 750 and 800 °C are 0.328, 0.207 and 0.155 Ω cm 2 , respectively, presenting high electrochemical activity towards CO oxidation. The maximal power densities can reach up to 303.3, 482.2 and 691.9 mW/cm 2 at 700, 750 and 800 °C, respectively. When the reversible SOCs are operated in solid oxide electrolysis cell mode, the polarization resistance of the electrolysis cell for pure CO 2 reduction at 800 °C has the minimal value of 0.126 Ω cm 2 at 1.8 V. At 2.0 V, the current densities can reach up to 0.584 1.219 and 2.204 A/cm 2 at 700, 750 and 800 °C, respectively. The durability of the cell in CO for as long as 200 h indicates the electrode has remarkable stability. And the short-term stability characteristics for CO 2 electrolysis at different voltages illustrate that the cell performs well below 2.0 V. The harsh reducing environment at 2.0 V may be detrimental to the Cu/CMF electrode.
研究领域:
电化学
·
能源材料
·
功能陶瓷
·
催化化学
·
可再生能源
·
电化学能量转换
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2019
·
IF 3.413
Zhilin Xi,Shuhui Zhou,Longzhe Jin
In this work, a self-hardening foam-sol (SHF) is proposed to control the diffusion of static coal dust. The SHF was mainly synthesized by a foaming solution (composed of 1 g/L polyethylene oxide (PEO), 25 g/L sodium dodecyl sulfate (SDS), 100 g/L sodium silicate and 874 g/L water) and organic acid with a concentration range of 10 to 13 g/L. Based on fluorescence spectrophotometry , drop shape analysis, X-ray photoelectron spectroscopy and scanning electron microscopy, several conclusions could be found. The critical micelle concentration of SDS was 25 g/L, when most of the pyrene pendants were solubilized into the SDS micelles to form the hydrophobic mixed micelles, and excimer formation began to reach a maximum. The SHF had optimal wetting ability with the smallest contact angle of 17 o , due to PEO-bonded water and SDS forming hydrogen and a dual adsorption layer, which could enhance the wetting ability of the SHF on coal dust surfaces. The SHF had the best accepted loss of liquidity time (180–86 s) and self-hardening time (236–121 s) via the reaction of sodium silicate and organic acid. The pores and cracks among dust particles could be linked closely by SHF via the solid bridge force. The primary components were silica and sodium carbonate with crystal water and hydrophilic C O and C O or O–C–O functional groups. Based on the dust suppression experiment, the dust suppression efficiency was almost 100% at airflow speeds below 12 m/s. Obviously, the dust particles could be controlled via their surfaces being covered by a layer of SHF, since the SHF has strong hydrophilic properties and the solid bridge force. In addition, vehicle-mounted SHF preparation equipment was designed.
研究领域:
环境工程
·
矿业安全
·
胶体与界面化学
·
职业健康
·
颗粒物控制
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2017
·Vol. 42
·期 34
·22294-22301
·
IF 3.582
Jiang Li,Tianmu Lv,Nianjun Hou,Ping Li,Xueli Yao,Lijun Fan,Tian Gan,Yicheng Zhao,Yongdan Li
The effects of Mo doping into the B-site of La 0.3 Sr 0.7 TiO 3-δ perovskite on its ionic conductivity and catalytic activity as an anode material of solid oxide fuel cells have been investigated. The partial substitution of Ti by Mo reduces the bond energy between metal and oxygen ions in the perovskite. The concentration of Mo 5+ /Mo 6+ redox couples increases with the rise of the content of Mo, while the oxygen ionic conductivity decreases simultaneously. The doping of Mo significantly reduces the anodic polarization resistance and improves the performance of the single cell. The cell with La 0.3 Sr 0.7 Ti 0.97 Mo 0.03 O 3-δ anode and La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3-δ electrolyte exhibits a maximum power density of 135 mW cm −2 at 850 °C with hydrogen as fuel.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
燃料电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2023
·
IF 9.2
Tianyao Ding,Dong Zheng,Huainan Qu,Weixiao Ji,Xiaoxiao Zhang,Dongping Lu,Gongwei Wang,Deyang Qu
An in-situ electrochemical optical diagnosis is the key to the investigation of electrode interface during a redox reaction . Because the morphology changes particularly, dendrite formation, dendrite shapes, solid electrolyte interface formation and gas generation can be revealed visually. The challenge of ensuring uniform current density on a flat Li anode in a liquid electrolyte is addressed and uniform Li plating is demonstrated. The dendrite shape change under different reduction current density is discussed. The Li dendrite shape change and the performance of Li anodes with a surface lamination of graphite and red phosphate are used as examples to demonstrate the capability of the in-situ optical cell. An in-situ electrochemical optical cell used in the investigation of the increasingly popular solid-state Li batteries has its own challenges. Due to the untransparent nature of a solid-state electrolyte, an optical investigation on a solid-state electrolyte Li battery needs to be done by exposing the cross-section of the cell. In addition, it is very difficult to assemble an optical cell with a brittle and fragile solid-state electrolyte in a glove box. A set of formation and transfer dies, and an optical cell are introduced. The Li dendrite growth at the interface can be observed in a solid-state Li cell.
研究领域:
电化学
·
材料科学
·
能源存储
·
固态电池
·
界面科学
✓ 已验证
DOI
高影响因子
BioEnergy Research
·
2015
·Vol. 8
·期 3
·1263-1274
·
IF 3.541
Zhang Zhi-bo,Lu Qiang,Ye Xiao-ning,Wang Ti-peng,Wang Xian-hua,Dong Chang-qing
Solid phosphoric acid (SPA) catalysts with different carriers were prepared and used for catalytic fast pyrolysis of poplar wood to produce levoglucosenone (LGO), a valuable anhydrosugar derivative that can be used in various organic synthesis applications. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were performed to evaluate the catalytic capabilities of these catalysts under different reaction conditions. The results indicated that SPA catalyst prepared with the SBA-15 carrier exhibited the best catalytic capability for selectively producing LGO. Both the catalytic pyrolysis temperature and catalyst-to-biomass ratio affected the pyrolytic products greatly. The maximal LGO yield reached as high as 8.2 wt% from poplar wood, obtained at the pyrolysis temperature of 300 °C and the catalyst-to-biomass ratio of 1. The by-products during the catalytic pyrolysis process were mainly acetic acid (AA) and furfural (FF). In addition, the SPA catalyst possessed better catalytic capability than the liquid phosphoric acid (H 3 PO 4 ) catalyst to produce LGO.
研究领域:
生物能源
·
催化化学
·
生物质转化
·
热解化学
·
绿色化学
·
可再生资源利用
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Chengyu Mo,Yutao Yang,Zhenyu Wang,Yanpeng Lv,Rongzheng Tian,Zixiang Zhao,Hongzhou Zhang,Chunliang Li,Lianqi Zhang,Yongan Yang,Dawei Song
Sulfide solid electrolytes have attracted wide attention due to their high ionic conductivity . Li 6 PS 5 Cl is one of the most promising electrolytes for all-solid-state lithium batteries with high-energy-density. It is reported that the disordered arrangement of Cl - in the aragonite structure has a significant effect on the conductivity of Li 6 PS 5 Cl. In this work, the disorder of anion sites is modestly regulated by adjusting the ratio of S and Cl in Li 6−x PS 5−x Cl 1+x electrolyte. In addition, to verify the commonality of this strategy, Li 5.6 PS 4.6 Cl 1.4 is prepared using self-made Li 2 S, and similar results are obtained. On this basis, the density of Li 5.6 PS 4.6 Cl 1.4 electrolyte sheet is improved by hot-pressing, which can successfully inhibit the growth of lithium dendrites . As expected, the ionic conductivity of the sulfide electrolyte and the electrochemical performance of the ASSLBs are greatly improved. A highest ionic conductivity of 8.2 × 10 −3 S cm −1 of Li 5.6 PS 4.6 Cl 1.4 is obtained at room temperature. A high capacity retention of 99.99 % is maintained for NCM811 @Li 2 O//Li 5.6 PS 4.6 Cl 1.4 //Li-In system after 400 cycles at 1 C with ultra-high cathode loading of 35.6 mg cm −2 . Besides, the cost of sulfide electrolytes can be reduced as the decreased usage of Li 2 S. This work proposes a novel synthesis method of low-cost and high-performance Li 6−x PS 5−x Cl 1+x electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Xiaowei Kong,Xiaoliang Zhou,Yu Tian,Xiaoyan Wu,Jun Zhang,Wei Zuo,Xiaobo Gong,Zhanhu Guo
A novel La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3-δ (LCFNb) perovskite for solid oxide fuel cells (SOFCs) anode is prepared by means of the citrate-nitrate route and composited with Ce 0.8 Sm 0.2 O 1.9 (SDC) by impregnation method to form nano-scaled LCFNb/SDC anode catalytic layers. The single cells with LCFNb and LCFNb/SDC impregnated anodes both achieve relatively high power output with maximum power densities (MPDs) reaching up to 610, 823 mW·cm −2 in H 2 at 800 °C, respectively, presenting a high potential of LCFNb for use as SOFCs anode. The power outputs of the single cells with LCFNb/SDC composite anode in CO and syngas (CO H 2 mixture) are almost identical to that in H 2 at each testing temperature. This composite anode also presents excellent durability in both H 2 and CO for as long as 50 h, showing desirable anti-reduction and carbon deposition resistance abilities. Besides, the cell output is stable in 100 ppm H 2 S H 2 atmospheres for 20 h at a current density of 600 mA·cm −2 with negligible sulfur accumulation on the anode surface . Hence, a novel iron based perovskite LCFNb anode with remarkable cell performance, carbon deposition resistance and sulfur poisoning tolerance for SOFCs is successfully obtained.
研究领域:
材料科学
·
电化学
·
能源材料
·
无机非金属材料
·
功能陶瓷
·
清洁能源技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 28
·14162-14170
·
IF 11.301
Zhihong Du,Keyun Li,Hailei Zhao,Xu Dong,Yang Zhang,Konrad Świerczek
Modified by Sm0.2Ce0.8O2−δ (SDC) nanoparticles (NPs), SmBaCo2O5+δ (SBCO) double perovskite oxide is evaluated as a promising cathode material for intermediate temperature solid oxide fuel cells. The SDC NPs are epitaxially grown on the surface of SBCO with (220) planes of SDC aligning smoothly to (020) or (100) planes of SBCO, forming a tight, coherent connection at the interface. The influence of this modification on thermal expansion, oxygen diffusion, electrical conductivity and electrochemical properties is investigated thoroughly in this work. The designed SBCO–SDC cathode material demonstrates a lower thermal expansion coefficient (TEC), ∼16.4 × 10−6 K−1, than that of the unmodified SBCO, ∼20.9 × 10−6 K−1. While SDC coating results in a decreased total electrical conductivity, it facilitates oxygen bulk diffusion and improves the surface exchange reaction kinetics. Coating with SDC NPs can accelerate the rate-determining process of dissociation of the absorbed molecular oxygen, especially at intermediate temperatures. Accordingly, the constructed symmetrical cell with the La0.8Sr0.2Ga0.8Mg0.2O3−δ (LSGM) electrolyte shows lower polarization resistance values, if the SBCO–SDC cathode is utilized. Also, the LSGM electrolyte-supported (300 μm) full cell is found to deliver a high power density of 800 mW cm−2 at 800 °C. Owing to the strong and coherent interfacial connection, the developed cathode demonstrates a relatively steady electrochemical performance.
研究领域:
材料科学
·
能源化学
·
电化学
·
无机功能材料
·
燃料电池技术
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2024
·
IF 8.1
Cheng Li,Guangyu Li,Yongtao Zhan,Chenzhao Liu,Yujie Tang,Dong Yan,Jian Li,Lichao Jia
A strategy of in-stack dry reforming of methane (DRM) is proposed by using La 0.6 Sr 0.2 Cr 0.85 Ni 0.15 O 3-δ -loaded Ni foam (LSCrN@NF) as a CH 4 –CO 2 reformer, fuel gas distributor, and anode current collector in a SOFC stack. The prepared LSCrN exists as a single phase in a perovskite structure ; its reduced form contains exsolved Ni nanoparticles embedded on the surface of the LSCrN substrate. Introduced into an NF, the reduced LSCrN@NF demonstrates high DRM activity that increases with the increase of LSCrN amount to an optimum of about 42%. With the LSCrN@NF in-stack DRM, the conversions of CH 4 and CO 2 into CO and H 2 increase. Thus, the electrode polarization resistance, including the cathode and anode , decreases to 0.62, 1.07, and 3.93 Ω cm 2 at 800 °C, 750 °C, and 700 °C, respectively. Consequently, the peak power density (PPD) of the cell using 45% CH 4 -45% CO 2 –10% N 2 as fuel is 1.17, 0.94, and 0.47 W cm −2 , significantly higher than that of the cell without LSCrN@NF in-stack DRM. In addition, the voltage of the cell with LSCrN@NF in-stack DRM is stable on a level between 0.81 and 0.82 V at 400 mA cm −2 and 750 °C for 270 h without detected carbon deposition in the Ni–Y 2 O 3 stabilized ZrO 2 anode. This LSCrN@NF in-stack DRM strategy is also adopted with a large-scale (13 × 13 cm 2 ) single cell, which shows an extrapolated PPD of 428.3 mW cm −2 at 750 °C and is operated for 40 h at 400 mA cm −2 without noticeable performance degradation .
研究领域:
能源材料
·
电化学工程
·
催化化学
·
燃料电池技术
·
高温材料科学
·
化学反应工程
·
清洁能源转化
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）