TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2025
·Vol. 35
·期 7
·2341-2353
·
IF 4.7
Han-zhou LIU,Yan-chen LIU,Sheng-hao JING,Ya-qi HU,Zong-liang ZHANG,Si-liang LIU,Yang LIU,Zhi ZHUANG,Fan-qun LI,Fang-yang LIU
A dual-halide solid electrolyte, Li 3 YCl 3 Br 3 , was synthesized using a wet-chemistry route instead of the conventional mechanical ball-milling route. Li 3 YCl 3 B r3 exhibits an ion conductivity of 2.08 mS/cm and an electro- chemical stability window of 3.8 V. Additionally, an all-solid-state lithium-ion battery using Li 3 YCl 3 Br 3 and LiNi 0.83 Co 0.11 Mn 0.06 O 2 (NCM811) as the cathode material achieves a capacity retention of 93% after 200 cycles at 0.3 C and maintains a specific capacity of 115 mA·h/g during 2 C cycling. This exceptional performance is attributed to the high oxidative stability of Li 3 YCl 3 Br 3 and the in-situ formation of Y 2 O 3 inert protective layer on the NCM811 surface under high voltage. Consequently, the study demonstrates the feasibility of a simple, cost-effective wet-chemistry route for synthesizing multi-component halides, highlighting its potential for large-scale production of halide solid electrolytes for practical applications.
研究领域:
材料科学
·
电化学
·
固态离子学
·
能源存储
·
电池技术
·
无机非金属材料
·
纳米材料应用
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 15
·期 3
·2528-2538
·
IF 1.5
Wenhui Geng,Mengmeng Zheng,Dan Chen,Xianwen Wang,Zekai Zhang,Yishan Lin,Dongqin Cai,Huiqin Li,Guobo Huang,Yanxian Jin Yu,Binbin Yus
Palladium catalyst (Pd) are made attention to application in alcohol fuel cells due to unique performance, as well as the resource abundance and low cost, but the catalyst performance and stability of the catalysts are still not satisfied. In this article, the novel PdFe/B-N-G catalysts with the double element alloying and dual-doping for ethanol electro-oxidation are successfully prepared and determined by XRD, TEM and XPS. TEM results reveal a relatively uniform and high dispersion of Pd particles is observed on PdFe/B-N-G catalyst. The XPS analysis indicates that Pd(0) contents of the PdFe/B-N-G catalyst are increased on account of the B, N-doping effect. Being explored as the catalyst to the ethanol oxidation reactions, the PdFe/B-N-G catalysts exhibit the better electrocatalytic activity with higher current densities and catalyst stability compared to those of PdFe/G and Pd/B-N-G, which can be attributed to the synergistic effect of the enhanced PdFe alloying and the B, N-doping, that can produce more activity sites dispersing on the surface of graphene. Thus, the novel PdFe/B-N-G catalysts can be the potential alternate in alcohol fuel cells.
研究领域:
电化学
·
纳米催化
·
能源材料
·
燃料电池
·
表面科学
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2018
·
IF 1.861
Jianyi Liu,Yan Liu,Dianxin Jin,Minjia Meng,Yinhua Jiang,Liang Ni,Zhanchao Liu
Tannic-acid-templated large pore mesoporous silica nanoparticle (LMSN) was synthesized using one-pot procedure and the external surface was further modified with APTES (LMSN-N) to immobilize trypsin. After modification, trypsin was difficult to be immobilized on the outer surface of the LMSN due to the electrostatic repulsion. Naturally, study of the trypsin immobilized in the interior pores could be implemented solely. Meanwhile, the activity of immobilized trypsin was optimized by response surface method (RSM), and the ANOVA was employed to explore the interaction between independent variables. The maximum enzyme activity (12.28 U/mg) was obtained under a certain condition that the quality of T-LMSN-N-272 was 153 μg, the pH was 7.9, and the temperature was 40.4 °C. Simultaneously, the immobilized enzyme was proved to possess better thermal stability, storage stability and recycling performance than free enzyme.
研究领域:
生物化学
·
材料科学
·
酶工程
✓ 已验证
产品关联
DOI
高影响因子
FUEL PROCESSING TECHNOLOGY
·
2018
·
IF 3.956
Shu-Sen Liu,Yong-Yong Jin,Yahong Han,Jinxian Zhao,Jun Ren
It is a big challenge to improve the stability and anti-coking abilities of catalyst in high temperature CO methanation reaction. To address the issue, SiC was chose as the support, and Ce was used as a promoter to prepare supported Ni catalysts for CO methanation. A long-term high temperature stability evaluation experiment was carried out at 600 °C for 100 h in comparison with Ni/Al 2 O 3 catalyst. The catalysts were characterized by a combination of characterization techniques for understanding the catalytic performance and carbon deposition behaviors in CO methanation. The life test result indicates that, compared to Ni/Al 2 O 3 , Ni/SiC is thermally stable and highly resistant to carbon deposition . Improved cataytic activity and stability was further reached by introduce of Ce promoter into Ni/SiC, which can be attributed to the enhanced interaction between Ni and SiC and improved dispersion of Ni active species.
研究领域:
催化化学
·
能源化学工程
·
材料科学
·
工业催化
·
化学反应工程
✓ 已验证
DOI
高影响因子
CELLULOSE
·
2019
·Vol. 26
·期 3
·1577-1593
·
IF 3.917
Jiang Yan,Liu Xiuyu,Yang Qiang,Song Xueping,Qin Chengrong,Wang Shuangfei,Li Kecheng
Abstract This study investigated effects of residual lignin on composition, structure and properties of cellulose fibrils and cellulose fibril-based films by comparing two groups of cellulose fibrils which contained different amounts of lignin (15% and 2%, respectively) but were similar in cellulose to hemicellulose ratio. The results showed that lignin affected the size and content of nanofibril in cellulose fibrils through initially delaying but ultimately facilitating the mechanical defibrillation. Due to higher thermal stability and strong UV absorption capability, lignin enhanced the thermal stability and UV blocking properties of cellulose fibril-based film. Hydrophobic lignin also improved the dewatering of cellulose fibrils and the hydrophobicity of cellulose fibril-based film. Lignin interfered with the interfibrillar hydrogen bonding and therefore increased the mesopore diameter of cellulose fibril network. Lignin acting as a cement in cellulose fibril-based film made the film with a more densely packed structure, a higher density and a smoother surface. However, lignin decreased the transparency of cellulose fibril-based film due to its chromophore groups and impaired the mechanical strength of cellulose fibril-based film through interfering with the interfibrillar hydrogen bonding. Graphical abstract
研究领域:
材料科学
·
植物学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 54
·期 8
·6451-6460
·
IF 3.442
Zhang Yixin,Liu Lei,Zhang Lili,Yu Yifeng,Lv Haijun,Chen Aibing
Carbon nanotube (CNT) has been intensively studied as supercapacitor electrode materials due to their high mechanical strength and excellent electrical conductivity. However, CNT with limited accessible surface area has low specific capacitance, which limits its application and development in supercapacitor. Herein, we have designed a thin N-doped porous carbon layer-modified CNT nanocomposite by template-free method. In this process, 3-aminophenol and formaldehyde rapidly self-assemble on the CNT in the presence of cationic surfactant CTAB, forming the composite of 3-aminophenol/formaldehyde (3-AF) resin and CNT. Due to the different polymerization degree of inside 3-AF resin, the soluble 3-AF resin oligomer was removed by acetone to form porous 3-AF resin and CNT@N-doped porous carbon (CNT@N-PC) was obtained by annealing process. The CNT@N-PC exhibited abundant porous structure, high specific surface area of 940 m 2 g −1 , excellent specific capacitance value of 224 F g −1 at 1 A g −1 and good cycle stability, demonstrating its potential as supercapacitor electrode materials.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Yonghui Xu,Liang Zhang,Shuwen Yin,Xiudi Wu,Hongpeng You
Despite significant progress has been made in the luminescent materials for white light emitting diodes (WLEDs), it is still desirable to develop novel highly efficient phosphors with appropriate excitation and high visible emission for high color rendering WLEDs. In this study, we report a novel phosphor BaGa 2 Si 2 O 7 :Ce 3+ ,Tb 3+ (BGSO:Ce 3+ ,Tb 3+ ) with highly effective green luminescence. BGSO:Ce 3+ ,Tb 3+ phosphor represents a broad excitation band in the range of 300–400 nm and intense emission at approximately 542 nm with a high photoluminescence quantum efficiency of 76.4%. The structure, luminescence, and energy transfer from the Ce 3+ and Tb 3+ ions were investigated in detail. Moreover, the incorporation of Na + or K + ions into BGSO:Ce 3+ ,Tb 3+ for charge compensation can improve the emission intensity and thermal stability. Moreover, a near ultraviolet (n-UV) pumped prototype WLED device was fabricated and it exhibited bright warm-white light with CIE chromaticity coordinates of (0.3561, 0.3344), high color-rendering index (Ra=90.4), and low CCT (3330 K) upon 20 mA driving current. This work provides a new strategy to develop high-quality solid-state LED phosphors.
研究领域:
材料科学
·
光学工程
·
固体物理
·
发光材料
·
半导体器件
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·Vol. 47
·期 21
·30039-30042
·
IF 4.527
Leihao Feng,Qiwei Hu,Li Lei,Lei Qi,Leilei Zhang,Meifang Pu,Zili kou,Fang Peng,Duanwei He,Yohei Kojima,Hiroaki Ohfuji,Tetsuo Irifune
High-hardness TaN compacts with a diameter and height of 6 mm were synthesized through the phase transformation of CoSn-type into WC-type TaN under experimental conditions of high temperature and high pressure . The Vickers hardness of WC-type TaN compacts obtained at the pressure of 5 GPa and the temperature of 1873 K is found to be ~21.5 ± 1.5 GPa with a load of 3 Kg, which is comparable to that of the pure tungsten carbide compact (~20 GPa) and higher than those of ultrahigh temperature ceramics ZrB 2 and HfB 2 under the same load. The high hardness of WC-type TaN compacts presented in this work is attributed to the deviatoric strain and well-bonded nanograins . The synthesized WC-type TaN compacts also possess a high oxidation temperature (1072 K). These results suggest that the WC-type TaN with high hardness and high thermal stability holds great promise for industrial applications.
研究领域:
材料科学
·
无机非金属材料
·
超硬材料
·
高温材料
·
固态化学
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2019
·
IF 2.961
Hui Gao,Siyuan Liu,Zhipeng Xue,Wenjing Liu,Yanguang Nie,Guoqing Chen,Xiaolong Li
Herein, CsPbBr 3 quantum dots (QDs) were successfully synthesized via the supersaturated recrystallization (SR) method by using para-xylene as the anti-solvent. The as-prepared CsPbBr 3 QDs exhibited high quantum efficiency (78%) and narrow luminescent peaks with a full width at half maximum of around 21.2 nm. Compared with the commonly-used anti-solvents, para-xylene shows low toxic effect and high freezing point (13.3 °C). Therefore, CsPbBr 3 QDs can be easily preserved in the refrigerator like an ice-cream for further use. The maximum photoluminescence (PL) emission intensity would reach 90% retention after 60 days’ storage in the refrigerator. By using this simple method, the stability of CsPbBr 3 QDs has been effectively improved for long-term storage and further application.
研究领域:
材料科学
·
纳米科技
·
光电子学
·
无机化学
·
半导体材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 99
·97036-97047
·
IF 3.289
Mei Wang,Jianling Xia,Jianchun Jiang,Shouhai Li,Mei Li
Dipentene-maleic anhydride (DPMA) was prepared by the Diels–Alder addition of dipentene with maleic anhydride. DPMA was converted via ammonolysis with para-aminobenzoic acid (PABA) to form N-(3-amino-benzoic acid)terpene-maleamic acid (ABDPMA), which was then converted to zinc soap (ABDPMA-Zn) or calcium soap (ABDPMA-Ca). Their chemical structures were confirmed by FT-IR and ICP-AES. Thermal stabilizing effects of ABDPMA-Ca/ABDPMA-Zn were compared with ABTMA-Ca/ABTMA-Zn (ABTMA: N-(3-amino-benzoic acid)tung-maleamic acid), C36DA-Ca/C36DA-Zn (C36DA: dimer fatty acid), ZnMA/ZnO (MA: maleic acid), EFC/ZnSt2/ESBO (EFC: calcium salt of epoxidised fatty acid; ESBO: epoxidised soybean oil, and CaSt2/ZnSt2 (St: stearic acid). Thermal stabilities of poly(vinyl chloride) (PVC) compounds were determined using Congo Red test, discoloration test, ultraviolet-visible spectroscopy analysis and thermogravimetric analysis. Dynamic mechanical and tensile properties of the PVC compounds were also studied. Besides better plasticization performance, ABDPMA-Ca/ABDPMA-Zn improved the long thermal stability of PVC compared with ABTMA-Ca/ABTMA-Zn, C36DA-Ca/C36DA-Zn, and CaSt2/ZnSt2.
研究领域:
高分子化学
·
材料科学
·
塑料加工
·
热稳定化
·
功能添加剂
✓ 已验证
DOI
高影响因子
CHEMICAL COMMUNICATIONS
·
2016
·Vol. 52
·期 64
·9969-9971
·
IF 6.567
Yan Zhang,Yubin Niu,Min-Qiang Wang,Jingang Yang,Shiyu Lu,Jin Han,Shu-Juan Bao,Maowen Xu
In this communication, we designed and synthesized a novel calcium–organic framework and presented it as an anode material for sodium-ion batteries. The results show that it delivers a reversible capacity of higher than 140 mA h g−1 even after 300 cycles. The remarkable performance is attributed to the high structural stability and extremely low solubility of the calcium–organic framework in electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2017
·
IF 4.747
Enmin Chen,Lianqi Cao,David Julian McClements,Shilin Liu,Bin Li,Yan Li
The impact of incorporating different levels of cinnamaldehyde (CA) into the oil phase used to prepare whey protein isolate (WPI)-stabilized nanoemulsions was investigated. Stable nanoemulsions could not be formed by pure CA, which was attributed to gravitational separation, but they could be formed from mixtures of CA and triglycerides. The mean particle diameter produced by homogenization decreased with increasing CA, which was attributed to the reduction of oil phase interfacial tension and viscosity. CA enhanced the physical stability of the nanoemulsions to salt addition (0–500 mM) and thermal processing (30–90 °C), but could not prevent droplet flocculation near the protein's isoelectric point (around pH 5). SDS-PAGE and surface load measurements indicated that more protein accumulated at the droplet surfaces in the presence of CA, which was attributed to interfacial crosslinking. CA may therefore be a useful means of modulating the physicochemical properties of protein-stabilized nanoemulsions.
研究领域:
食品科学
·
胶体与界面化学
·
蛋白质功能特性
·
递送系统
·
食品纳米技术
✓ 已验证
DOI
高影响因子