CERAMICS INTERNATIONAL
·
2021
·Vol. 48
·期 3
·3636-3646
·
IF 4.527
Shunxiang Wang,Songwen Fang,Kexiang Zhang,Yongjin Zou,Zuoan Xiao,Fen Xu,Lixian Sun,Cuili Xiang
A poor electrical conductivity and short cycle life limits the wide application of transition metal oxides in energy storage applications. In this study, yolk-shell structured CuCo 2 S 4 was grown on NiO nanosheets (NiO@CuCo 2 S 4 ) via a hydrothermal method and vulcanization , which combined the synergistic interactions between Ni, Co, and Cu. The effect of varying the amount of the vulcanizing agent (thiourea) on the electrochemical performance of NiO@CuCo 2 S 4 was also investigated. Moreover, the amount of thiourea not only tuned the morphology of the composite, but significantly influenced its electrochemical performance. When the Cu 2+ : Co 2+ : thiourea molar ratio in the precursor solution was 1:2:6, the obtained NiO@CuCo 2 S 4 exhibited the best electrochemical performance of the various systems examined, with a specific capacitance of 1658 F g −1 being achieved at 1 A g −1 . Density functional theory calculations further confirmed the excellent synergistic effect between NiO and CuCo 2 S 4 . In addition, the asymmetric supercapacitor composed of a NiO@CuCo 2 S 4 positive electrode reached an ultrahigh energy density of 73 Wh kg −1 at a power density of 802 W kg −1 , as well as excellent cycling stability (i.e., 91% capacitance retention after 5000 cycles). These results suggest that NiO@CuCo 2 S 4 is a promising candidate for use in energy storage applications.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Tan Dang,Lei Wang,Donghai Wei,Guiqing Zhang,Qinggang Li,Xiaojia Zhang,Zuoying Cao,Guanhua Zhang,Huigao Duan
Low-cost and resourceful transition metal phosphides (TMPs), as a new kind of pseudocapacitive materials, have received considerable interest for electrochemical energy storage/conversion. Combination of TMPs and carbon nanostructures is supposed to greatly improve the charge storage capability due to the synergistic effect. In this work, nickel cobalt phosphides nanosheets supported by P doped C spheres (P-CSs@Ni-Co-P NSs) composites with different Ni/Co molar ratios (1:0, 1:1, 1:2, 1:4 and 0:1) were prepared by in-situ bifunctional phosphorization of the as-synthesized CSs@Ni-Co-OH NSs precursor. The optimized 3D networked mesoporous P-CSs@Ni 1 -Co 2 -P NSs electrode exhibits a remarkable specific capacitance of 1040.3 F g −1 at 1 A g −1 and excellent rate capability with a capacitance retention of 49.2% even at 30 A g −1 , which are much higher than those of A-CSs@Ni 1 -Co 2 -O NSs (870.5 F g −1 at 1 A g −1 , 37.4% at 30 A g −1 ) and Ni 1 -Co 2 -P NSs (500.5 F g −1 at 1 A g −1 , 40.0% at 30 A g −1 ). The improved supercapacitive performances are attributed to the 3D mesoporous nanosheets network and bifunctional phosphorization treatment which lead to enhancement of conductivity. Meanwhile, Ni-Co bimetallic phosphide with abundant oxidation states facilitates redox charge transfer efficiently. Furthermore, P-CSs@Ni 1 -Co 2 -P NSs assembled asymmetric supercapacitors (ASC) achieve outstanding cycling stability with no decay of capacitance after 20000 cycles. Additionally, the charge storage kinetic of the device is further investigated, indicating that fast surface-control capacitive behavior is dominant at high current densities.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Jiaying Zhang,Zhendong Yao,Wenzhen Zou,Qiang Shen,Meiqiang Fan,Tingli Ma
Transition trimetallic sulfide NiCoMn–S attracts great attention due to its high specific capacity for hybrid supercapacitors , as well as Ti 3 C 2 is considered essentially as a potential new electrode material with iconic two-dimensional layered structure and excellent conductivity. Herein, NiCoMn–S nanoparticles are composited with two-dimensional layered Ti 3 C 2 via simple one-step hydrothermal method , which is first applied as positive electrode in hybrid supercapacitors (HSCs). A large number of NiCoMn–S nanoparticles distribute on the surface of Ti 3 C 2 and even insert into the Ti 3 C 2 layers, providing abundant electrochemical active sites for redox reaction and enhancing the mechanical stability for composites. Moreover, the NiCoMn–S/Ti 3 C 2 composites show lower charge-transfer resistance than pure NiCoMn–S, illustrating that the two-dimensional layered structure of Ti 3 C 2 improve the conductivity and supply additional electronic channels for ion transportation. The NiCoMn–S/Ti 3 C 2 -3.4% delivers a specific capacity of 347.1 C g −1 at a specific density of 1 A g −1 , which is 28% higher than that of pure NiCoMn–S (270.2 C g −1 at 1 A g −1 ). Finally, a hybrid supercapacitor (HSC) is assembled by using NiCoMn–S/Ti 3 C 2 -3.4% as positive electrode and RGO as negative electrode, realizing a specific capacity of 164.3 C g −1 at 1 A g −1 and high specific energy of 16.2 Wh kg −1 at a specific power of 15 kW kg −1 .
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
MATERIALS LETTERS
·
2016
·
IF 2.437
Yan Fang,Xiaohong Jiang,Lihong Niu,Shujie Wang
Polypyrrole/aligned carbon nanotubes (PPy/ACNTs) core-shell nanotube arrays on metal foil have been fabricated through an electrochemical method. The as-prepared PPy/ACNTs electrode materials with novel nanostructure , which is very conducive to the transmission of electrons and ions, possess greatly improved electrochemical performance. The specific capacitances of PPy/ACNTs electrode materials can reach 505 F/g ( vs. the both mass of PPy and ACNTs) in three-electrode system. In two-electrode system, the specific capacitances of the PPy/ACNTs electrode materials can reach 456 F/g ( vs. the both mass of PPy and ACNTs). The PPy/ACNTs electrode materials also exhibit greatly improved rate capability and superior cycling performance.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2022
·
IF 4.778
Juguo Dai,Lili Luo,Xiaohong Wang,Long Xia,Hongmei Xie,Chunying Yang,Ruipan Wang,Yiting Xu,Lizong Dai
Nowadays, energy conversion devices have gradually gained attention while vigorously developing clean energy. Carbon materials are promising candidates for supercapacitors , but two issues have plagued the researchers. 1) Does the cation radius in the neutral electrolyte significantly impact the electrochemical performance of carbon materials? 2) How to introduce heteroatoms while constructing hollow structures in carbon spheres. This work proposes a facile template free strategy that uses aniline and pyrrole as nitrogen sources to synthesize carbon sphere precursors. High-temperature carbonization combined with alkali treatment leads to the formation of N-doped hollow porous carbon spheres. Robust wall structure (thickness is about 60–80 nm) and ideal surface structure (the specific surface area is 1079.9 m 2 g −1 ) endow the carbon spheres with excellent electrochemical performance and outstanding cycle stability. The specific capacitance of the carbon spheres in Li 2 SO 4 and Na 2 SO 4 electrolytes under negative working potential (−0.8–0 V) are 378.4 and 367.6 F g −1 , respectively, at a current density of 1 A g −1 . After 5000 cycles, the capacitance retentions are 87.1% and 94.8% in Li 2 SO 4 and Na 2 SO 4 electrolytes. We inferred that the cation radius has a negligible effect on the specific capacitance of carbon materials, but has a more significant effect on the cycling stability and capacitance rate performance. It is hoped that this work can provide a reference for the subsequent construction of N-doped hollow carbon spheres and reasonable selection of electrolytes.
研究领域:
材料科学
·
电化学
·
纳米能源
·
功能材料
·
储能技术
✓ 已验证
DOI
高影响因子
Energy & Environmental Materials
·
2023
·Vol. 7
·期 3
·e12641
·
IF 15
Huachao Yang,Yiheng Qi,Zifan Wang,Qinghu Pan,Chuanzhi Zhang,Jianhua Yan,Kefa Cen,Zheng Bo,Kostya (Ken) Ostrikov
Safe operation of electrochemical capacitors (supercapacitors) is hindered by the flammability of commercial organic electrolytes. Non-flammable Water-in-Salt (WIS) electrolytes are promising alternatives; however, they are plagued by the limited operation voltage window (typically ≤2.3 V) and inherent corrosion of current collectors. Herein, a novel deep eutectic solvent (DES)-based electrolyte which uses formamide (FMD) as hydrogen-bond donor and sodium nitrate (NaNO 3 ) as hydrogen-bond acceptor is demonstrated. The electrolyte exhibits the wide electrochemical stability window (3.14 V), high electrical conductivity (14.01 mS cm −1 ), good flame-retardance, anticorrosive property, and ultralow cost (7% of the commercial electrolyte and 2% of WIS). Raman spectroscopy and Density Functional Theory calculations reveal that the hydrogen bonds between the FMD molecules and NO 3 − ions are primarily responsible for the superior stability and conductivity. The developed NaNO 3 /FMD-based coin cell supercapacitor is among the best-performing state-of-art DES and WIS devices, evidenced by the high voltage window (2.6 V), outstanding energy and power densities (22.77 Wh kg −1 at 630 W kg −1 and 17.37 kW kg −1 at 12.55 Wh kg −1 ), ultralong cyclic stability (86% after 30 000 cycles), and negligible current collector corrosion. The NaNO 3 /FMD industry adoption potential is demonstrated by fabricating 100 F pouch cell supercapacitors using commercial aluminum current collectors.
研究领域:
电化学
·
材料科学
·
能源存储
·
应用化学
·
物理化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2021
·
IF 9.127
Rui Xuan,Jinhui Li,Dongxu Huang,Tao Wang,Bo Zhang,Fangfang Niu,Guoping Zhang,Rong Sun,Ching-Ping Wong
With the continuous development of flexible electronic devices, the corresponding demands for electrochemical storage devices with flexibility and self-healing properties have been raised. However, the current supercapacitors still have great limitations in mechanical and self-healing performance. Herein, flexible and self-healing poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/polyvinylimidazole (PVI)/LiCl polyelectrolyte is easily fabricated by a one-step copolymerization . The combined effect of electrostatic interaction and hydrogen bonding significantly enhances the mechanical and self-repairing ability of polyelectrolytes, showing excellent stretchability of 1137%, fracture stress of 154.57 kPa, and high healing efficiency of 91% at room temperature for 24 h. Besides, flexible electrode is prepared by adsorbing poly 3,4-ethylenedioxythiophene/polystyrene sulfonate on a polyurethane sponge. After assembly with a polyelectrolyte, the as-prepared supercapacitor proves excellent electrochemical performance. The area capacitance is 106 mF cm −2 at 50 mV s −1 and excellent cycle stability (97% capacity retention rate after 2000 cycles). In addition, the completely cut off supercapacitor can be successfully restored to 90% of the original capacitance, and still maintain a capacitance retention rate of up to 98% after 1000 cycles. This work provides a possible solution for designing low-cost intelligent and durable electrochemical storage device for smart clothing or electronic skin.
研究领域:
材料科学
·
高分子化学
·
电化学
·
柔性电子学
·
能源存储
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Siwei Zhao,Ying Chen,Zhiyang Zhao,Longfei Jiang,Chi Zhang,Jianshou Kong,Xufei Zhu
Anodic TiO 2 nanotubes have been intensively studied for the application in supercapacitors , but the formation of nanograss is often avoided for the belief that it may retard capacitive performance. We fabricate TiO 2 nanotubes topped with nanograss by H 3 PO 4 solution soaking and hydrogenation doping, which in fact increases the capacitance of nanotubes in a fast and convenient way. The new structure exhibits an enhanced areal capacitance by up to 67.7% and by up to 23.5% after 2000 times of cycling. The capacitance generally increases with the nanotube length and reaches the maximum with an optimal nanograss length. The electric charge during hydrogenation doping is determined to quantify the general doping effect. Compared with ordinary nanotubes, nanograss has larger contact area with electrolyte during doping. Therefore, the grass-topped structure yields more electric charge and Ti 3+ during doping, which attributes to the improved capacitance.
研究领域:
材料科学
·
纳米技术
·
电化学
·
能源存储
·
表面工程
✓ 已验证
DOI
高影响因子
IONICS
·
2018
·Vol. 25
·期 1
·241-251
·
IF 2.347
Wen Xinge,Dong Tao,Liu Ao,Zheng Shuohang,Chen Shimou,Han Yifan,Zhang Suojiang
As a polymer host, one polymeric ionic liquid poly(methyl methacrylate-1-vinyl-3-ethyl-imidazolium bis(trifluoromethylsulfonyl) imide) (abbr. P(MMA-co-VEImTFSI)) was successfully synthesized and characterized. Four poly(vinylidene fluoride-co-hexafluoropropylene) (abbr. PVDF-HFP)-based polymer electrolytes were prepared by blending 0, 5,15, and 25 wt% P(MMA-co-VEImTFSI). The electrochemical performances of the prepared electrolytes were studied carefully. The results revealed that increasing the polymeric ionic liquid content, the ionic conductivity of the polymer electrolytes could be enhanced and it obeyed the Arrhenius rule. The highest ionic conductivity of the polymer electrolytes was up to 2.09 × 10 −3 S cm −1 at room temperature. The polymer with 25 wt% polymeric ionic liquid showed an excellent electrochemical performance for supercapacitor electrolyte. After 2000 cycles, the retention of capacitance in P(MMA-co-VEImTFSI)-based polymer electrolyte was above 80%. It implied that the present P(MMA-co-VEImTFSI) polymeric ionic liquid was a decent component candidate in the high-performance polymer electrolytes.
研究领域:
材料科学
·
电化学
·
高分子化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
Energy Technology
·
2021
·Vol. 9
·期 12
·2100743
·
IF 3.631
Xin Hou,Penggang Ren,Zhong Dai,Zhengzheng Guo,Zengping Zhang,Aiyue Sun,Wenwei He,Fang Ren,Yanling Jin
Herein, nitrogen, oxygen codoped porous carbon nanofibers (CNFs) from corn residue-derived lignin are fabricated via the electrospinning method, followed by introduction of graphenes (GNs) via a simple “brush-coating and drying” process. The obtained GN-coated carbon nanofibers (CNFs@GNs) exhibit a 3D network architecture, abundance of heteroatoms, excellent electrical conductivity, high specific surface area (700.92 m 2 g −1 ), thus boosting the electrochemical performances. The CNFs@GNs electrode delivers a higher specific capacitance of 271.1 F g −1 than CNFs (200.3 F g −1 ) at 1 A g −1 . Furthermore, the assembled CNFs@GNs symmetric supercapacitor exhibits an energy density of 20.3 Wh kg −1 at the power density of 199.97 W kg −1 together with a high charge/discharge reversibility of 97.3% and Coulombic efficiency of 99.81% after 10 000 cycles. This “brush-coating and drying” strategy utilized here provides a convenient and efficient route for designing CNFs and GN composites and can be utilized in other active materials.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 65
·37417-37423
·
IF 2.936
Jihui Li,Kang Sun,Changyu Leng,Jianchun Jiang
Reasonable structure design and component selection are crucial to electrochemical performance of supercapacitor electrode materials. Sodium alginate (SA), with a novel structure which can immobilize multivalent metal cations, was used to coordinate with Fe3+ to fabricate a carbon and Fe3O4 composite by an easy sol–gel method. Due to the chelation effect between SA and Fe3+, the carbon composite was constructed into a two-dimensional sheet-like structure, and the Fe3O4 particles were nanosize and homogenously distributed on the surface of the carbon nanosheet. As an electrode material for supercapacitors, the composite electrode showed a high specific capacitance of 550 F g−1 at 1 A g−1 in the potential range from −1.1 to 0 V, and excellent cycling stability of 89% retention after 2000 cycles. The enhanced electrochemical performance could be attributed to the abundant exposed active sites, producing high pseudocapacitance, to the two-dimensional nanosheet structure, facilitating electrolyte transport and to the strong attachment strength, improving cycle life. This environmentally-friendly design can provide an alternative to existing methods, resulting in the development of a two-dimensional carbon/metal oxide composite for energy storage devices.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2021
·
IF 9.127
Shigen Bai,Yong Tang,Gong Chen,Yaopeng Wu,Yifu Liang,Shu Yang,Huilong Liu,Yingxi Xie
Supercapacitors (SCs) have garnered increasing attention as an alternative energy storage device but the relatively low potential window and energy density impede their application prospect. Herein, we propose a novel three-dimensional (3D) packaging method for the first time, utilizing high flexible phosphor-copper sheets (PCSs) sprayed with polytetrafluoroethylene (PTFE) and covered with polyimide (PI) films on their both sides as the serial medium followed by CO 2 laser irradiation to fabricate all-solid-state flexible high voltage supercapacitors (HVSCs). This method achieves double voltage output in the limited PI membrane compared with common 2D encapsulation. As a result, as-obtained HVSCs deliver not only an enhanced mechanical tensile strength up to 18.23 MPa but also the outstanding electrochemical performances, including ultrahigh working voltage window (10 V), high energy density (37.68 μWh/cm 2 ) and power density (3.38 mW/cm 2 ). Owing to the excellent flexibility, the HVSCs can be arbitrarily bent or twisted without obvious attenuation on capacitive property. After 10000 cycles, the capacitance retention of HVSCs still maintains to be 90.2%. This novel 3D packaging strategy may pave the way for developing high-performing SCs with wide operating voltage and high energy density for flexible displays, wearable equipment and integrated electrical devices.
研究领域:
材料科学
·
纳米技术
·
能源存储
·
柔性电子
·
电化学
·
高分子材料
·
先进制造
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）