CERAMICS INTERNATIONAL
·
2021
·Vol. 48
·期 3
·3081-3095
·
IF 4.527
Mingchao Wang,Zhaoli Chen,Jingxuan Liu,Zhaojie Feng,Jingfang Zhang,Wenzheng Zhai,Haijun Zhang
To meet the high demand for ceramic/superalloy composite structural components in various fields, an advanced high-temperature adhesion technique was firstly developed by preparing a novel inorganic/organic hybrid adhesive suitable for ZrO 2 and TC4 . Chemical bonding started to work at ∼600°C, and became the crucial bonding mechanism at elevated temperatures. The formation of ZrSiO 4 and Ti 5 Si 3 at the interfaces of two substrates not only increased the interfacial connection strength , but also formed two gradient layers with a size of ∼2 μm to effectively alleviate the difference of composition and performance between the adhesive and substrates. In the temperature range of 500–900°C, the matching degree of CTE among ZrO 2 , adhesive and TC4 is higher, and the maximum difference does not exceed 3×10 -6 K -1 . Meanwhile, the formation of a composite structure containing various ceramics (ZrO 2 , SiC and ZrB 2 ) and intermetallics (Ni–Si, Al–Ni), and the improvement of structural compactness of adhesive from 500 to 900°C greatly improved the bonding strength to the maximum value of 31.4 MPa at 900°C. Also, the adhesive pretreated at 900°C showed good thermal cycling resistance, and the strength was still higher than 15 MPa after 50 cycles. For cured adhesive, when used directly in an extreme environment, it can provide bonding strength not less than 5 MPa in the whole temperature range, indicating that the adhesive possessed potential emergency repair convenience. This work significantly broadened the application of high-temperature-resistant adhesion technology in the connection of dissimilar ceramics and alloys.
研究领域:
材料科学
·
复合材料
·
界面工程
·
高温功能材料
·
连接技术
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 33
·14103-14107
·
IF 3.288
Chanchan Xu,Le Lv,Dawei Luo,Wei Liu
By using pyrazine derivatives, three different types of copper(I) iodide based inorganic–organic hybrid structures, 1D-CuI(2-mo-pz) (1, 2-mo-pz = 2-methoxy-pyrazine), 2D-CuI(2,3-dm-pz)0.5 (2, 2,3-dm-pz = 2,3-dimethyl-pyrazine), and 2D-Cu2I2(2,5-dm-pz)2 (3, 2,5-dm-pz = 2,5-dimethyl-pyrazine), have been obtained by using a slow-diffusion method. Single crystal and powder X-ray diffraction analyses reveal that these hybrid structures are a one-dimensional (1D) staircase chain based structure, two-dimensional (2D) staircase-chain based structure, and 2D rhomboid dimer based structure, respectively. All of the three compounds show photoluminescence, with the internal quantum yield (IQY) as high as 88.2% for 1. This work provides evidence that for this type of hybrid materials, the structure of the inorganic module could be determined by the selection of the organic ligands and that the substituted group on the organic ligands can influence the luminescence efficiency of the hybrid structures.
研究领域:
无机化学
·
材料化学
·
配位化学
·
光物理
·
功能材料
✓ 已验证
DOI
高影响因子
Small
·
2017
·Vol. 13
·期 25
·1700364
·
IF 8.643
Xuhai Liu,Dejian Yu,Fei Cao,Xiaoming Li,Jianping Ji,Jun Chen,Xiufeng Song,Haibo Zeng
All-inorganic photodetectors based on scattered CsPbBr 3 nanoplatelets with lateral dimension as large as 10 µm are fabricated, and the CsPbBr 3 nanoplatelets are solution processed governed by a newly developed ion-exchange soldering mechanism. Under illumination of a 442 nm laser, the photoresponsivity of photodetectors based on these scattered CsPbBr 3 nanoplatelets is as high as 34 A W −1 , which is the largest value reported from all-inorganic perovskite photodetectors with an external driven voltage as small as 1.5 V. Moreover, the rise and fall times are 0.6 and 0.9 ms, respectively, which are comparable to most of the state-of-the-art all-inorganic perovskite-based photodetectors. All the material synthesis and device characterization are conducted at room temperature in ambient air. This work demonstrates that the solution-processed large CsPbBr 3 nanoplatelets are attractive candidates to be applied in low-voltage, low-cost, ultra highly integrated optoelectronic devices.
研究领域:
材料科学
·
光电子学
·
纳米科技
·
半导体器件
·
凝聚态物理
✓ 已验证
DOI
高影响因子
IONICS
·
2016
·Vol. 23
·期 10
·2603-2611
·
IF 2.119
Chen Shaojie,Zhao Yanran,Yang Jing,Yao Lili,Xu Xiaoxiong
Three types of inorganic electrolytes [Li 10 GeP 2 S 12 (LGPS), 75Li 2 S·24P 2 S 5 ·1P 2 O 5 (LPOS), Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP)] with different particle sizes and electrochemical properties are selected as active fillers incorporated into poly(ethylene oxide) (PEO) matrix to fabricate hybrid solid electrolytes. The optimum composition of each filler is found in consideration of ionic conductivity. Their electrochemical characteristics are investigated. The optimal conductivities are 1.60 × 10 −5 , 1.18 × 10 −5 , and 2.12 × 10 −5 S cm −1 at room temperature for PEO-1%LGPS, PEO-1%LPOS, and PEO-20%LAGP, respectively. The electrochemical stability windows of these hybrid solid electrolytes are all above 5 V (vs. Li + /Li). The results show that these fillers have positive effects on the ionic conductivity, lithium ion transference number, and electrochemical stability. The relationship between the type of filler and electrochemical properties has been investigated. All-solid-state cells LiFePO 4 /Li are fabricated and present fascinating electrochemical performance with high capacity retention and good cycling stability. This work provides promising electrolytes prepared by a simple method.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
功能材料
·
锂电池技术
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2022
·Vol. 10
·期 15
·2200605
·
IF 10.05
Shaofan Fang,Bo Zhou,Huixia Li,Hanlin Hu,Haizhe Zhong,Henan Li,Yumeng Shi
Metal halide perovskites are promising optoelectronic materials due to their unique luminescent properties. However, their practical application is limited by their poor chemical stability, especially in humid environments. Moisture can cause phase changes or chemical decomposition, resulting in significant fluorescence quenching. In this study, a copper-based organic–inorganic hybrid metal halide (t-BA) 3 Cu 6 I 9 is synthesized (t-BA + is the tert-butyl-ammonium ion (C(CH 3 ) 3 NH 3 + )). This material exhibits water-induced luminescence, and its chemical stability in humid environments is being investigated. Tetragonal t-BA 3 Cu 6 I 9 is not luminescent, but it reacts quickly with water in the air. The resultant (t-BA) 2 Cu 2 I 4 ·H 2 O has a broad green emission peak at 520 nm, high photoluminescence quantum yield of 59.4%. Remarkably, (t-BA) 2 Cu 2 I 4 ·H 2 O is converted back to t-BA 3 Cu 6 I 9 at temperatures above 40 °C. This phase conversion is highly repeatable, and the luminescent intensity can be fully recovered after 50 transformation cycles. The mechanism of luminescence is investigated through temperature-dependent photoluminescence spectra and theoretical calculation, which suggests that (t-BA) 2 Cu 2 I 4 ·H 2 O has a more localized charge distribution and sufficient polyhedral distortion, resulting in a bright and efficient emission from self-trapped excitons. This is the first report of water-induced luminescence in copper-based metal halides, and it paves the way for stable luminescent materials that are responsive to humidity.
研究领域:
材料化学
·
光物理学
·
无机化学
·
功能材料
·
发光材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Yang Bai,Yanbiao Zhao,Weidong Li,Linghui Meng,Yongping Bai,Guorong Chen
The developing sulfide solid electrolyte is a promising way to overcome shuttle effect of polysulfide in the traditional liquid Li-S battery. However, an air stable sulfide solid electrolyte and competitive solid–solid interface structure must be constructed firstly. Herein, we have designed an organic–inorganic multi-scale composite electrolytes to overcome the interfacial issues of solid state Li-S batteries (SSLSBs). The organic–inorganic composite electrolyte consists of a gel polymer electrolyte (GPE) and an oxygen doped inorganic sulfide solid electrolyte. The O doped sulfide solid electrolyte improves its chemical stability and suppresses the lithium dendrites. A thin GPE film protects the crystal structural stability during cycles and greatly enhances the performance of O doped sulfide solid electrolyte due to the GPE not only constructs soft interface contact between S cathode and solid electrolyte, but also builds lithium ion transport paths by ionic liquid between them. Those SSLSBs display a very good cycling performance with the specific capacity of 1023 mAh/g after 50 cycles at 60 °C and 541 mAh/g after 150 cycles at 30 °C under same rate of 0.1 C. This study demonstrates that the development of advanced solid-state Li-S battery needs to fully integrate a number of technical advantages.
研究领域:
电化学
·
材料科学
·
固态电池
·
能源存储
·
界面化学
·
纳米材料
·
电极材料
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Ying Jiang,Kai Chen,Jinping He,Yuxue Sun,Xiaorong Zhang,Xiaoxing Yang,Haiming Xie,Jun Liu
Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li + conductivity (1.24 ± 0.08 × 10 −4 S cm −1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li + /Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
固态离子学
✓ 已验证
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2014
·
IF 2.694
Guihua Ruan,Meiping Wei,Zhengyi Chen,Rihui Su,Fuyou Du,Yanjie Zheng
A novel large-volume immobilized enzyme reactor (IMER) on small column was prepared with organic–inorganic hybrid silica particles and applied for fast (10 min) and oriented digestion of protein. At first, a thin enzyme support layer was formed in the bottom of the small column by polymerization with α-methacrylic acid and dimethacrylate. After that, amino SiO 2 particles was prepared by the sol–gel method with tetraethoxysilane and 3-aminopropyltriethoxysilane. Subsequently, the amino SiO 2 particles were activated by glutaraldehyde for covalent immobilization of trypsin. Digestive capability of large-volume IMER for proteins was investigated by using bovine serum albumin (BSA), cytochrome c (Cyt- c ) as model proteins. Results showed that although the sequence coverage of the BSA (20%) and Cyt- c (19%) was low, the large-volume IMER could produce peptides with stable specific sequence at 101–105, 156–160, 205–209, 212–218, 229–232, 257–263 and 473–451 of the amino sequence of BSA when digesting 1 mg/mL BSA. Eight of common peptides were observed during each of the ten runs of large-volume IMER. Besides, the IMER could be easily regenerated by reactivating with GA and cross-linking with trypsin after breaking the –C N– bond by 0.01 M HCl. The sequence coverage of BSA from regenerated IMER increased to 25% comparing the non-regenerated IMER (17%). 14 common peptides. accounting for 87.5% of first use of IMER, were produced both with IMER and regenerated IMER. When the IMER was applied for ginkgo albumin digestion, the sequence coverage of two main proteins of ginkgo, ginnacin and legumin, was 56% and 55%, respectively. (Reviewer 2) Above all, the fast and selective digestion property of the large-volume IMER indicated that the regenerative IMER could be tentatively used for the production of potential bioactive peptides and the study of oriented protein digestion.
研究领域:
生物化学
·
分子生物学
·
蛋白质组学
·
酶工程
·
生物材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）