INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Quan-Yong Cheng,Xiao-Li Zhao,Yi-Dong Li,Yun-Xuan Weng,Jian-Bing Zeng
Traditional superhydrophobic cotton fabrics (SCFs) for oil/water separation were usually fabricated by surface coating with inorganic nanoparticles combined with nonrenewable and nonbiodegradable or even toxic fossil-based chemicals, which would lead to secondary environmental pollution after their lifetime. In this study, we report robust, nanoparticle-free, fluorine-free SFC, which was prepared by acid etching followed by surface coating with epoxidized soybean oil resin (CESO) and subsequent modification with stearic acid (STA). No toxic compound and no nanoparticle were included within the SCF and all the raw materials including cotton fabric, CESO and STA are biodegradable and derived from biological resources. The SCF showed excellent mechanical stability and chemical/environmental resistances. The superhydrophobicity of the SFC survived from mechanical abrasion , tape peeling, ultrasonication , solvent erosion and low/high temperature exposure. The SCF also exhibited good acid/alkali resistance with contact angle over 150° toward different pH water droplets. Moreover, the SCF could efficiently separate oil/water mixtures with efficiency above 97.9% and the superhydrophobicity remained after reusing for at least 10 times. The fully biological-derived SCF with excellent mechanical and chemical resistances exhibit great potential for separation of oil/water mixtures.
研究领域:
材料科学
·
环境工程
·
高分子化学
·
表面科学
·
可持续技术
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 17
·52018
·
IF 3.125
Xianggui Zhang,Xianglong Li,Antuo Wang,Bin Yang,Teng Hou,Yishen Lu,Jing Zhou
The separation of stable oil/water emulsions is an urgent global issue. In this work, a porous and superhydrophobic polytetrafluoroethylene (PTFE) fibrous membrane was obtained by first centrifugal spinning PTFE/potato starch fibers and then heat treating the fibers to remove the starch. Results showed that spherical protrusions and irregular striped protrusions appeared on the surface of the prepared PTFE fibers, which significantly increased the roughness and hydrophobicity of the fibrous membrane. In addition, number density and shapes of these protrusions could be tuned by changing the extent of the heat treatment and the potato amylose content during the fiber preparation. The water contact angle on the structured PTFE membranes was as high as 160°, and the water sliding angle was as low as 3.4°. The results of oil/water separation experiments showed that the oil removal rate reached 99.5% based a permeability of 3670 L/m 2 /h, which suggested that the obtained PTFE fibrous membrane has great potential for use in oil/water emulsions separation.
研究领域:
材料科学
·
环境工程
·
膜分离技术
·
表面科学
·
化学工程
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 9
·期 7
·3985-3994
·
IF 11.301
Ruidi Wang,Bei-Bei Xu,Jiachen Wang,Xue Lu Wang,Ye-Feng Yao
The relationship between the structural characteristics and photocatalytic reaction mechanisms of graphitic carbon nitride (g-C3N4) still remains unclarified at the molecular level, which severely hinders the further development of this field. The present study addresses this issue by employing an innovative strategy to investigate the relationship between the H-containing structures of g-C3N4 and its water splitting properties. The exchangeable and unexchangeable protons of the H-containing groups of g-C3N4 were differentiated by selective deuteration, providing a way to distinguish the hydrophilic and relatively non-hydrophilic H-containing groups of g-C3N4. A combination of advanced solid-state NMR approaches reveals that amino group defects (CN2(NHx)) on the C–N skeleton of the photocatalyst likely serve as hydrophilic active sites for facilitating the photocatalytic hydrogen evolution reaction. Accordingly, the newly synthesized g-C3N4 sample having a high concentration of CN2(NHx) by design demonstrates an enhanced H2 yield by a factor of 17 compared to that of pure g-C3N4.
研究领域:
材料化学
·
光催化
·
固体核磁共振
·
表面科学
·
能源材料
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 13
·期 2
·1423-1440
·
IF 1.5
Ruizhuo Ouyang,Lina Xu,Haifeng Wen,Penghui Cao,Pengpeng Jia,Tian Lei,Xia Zhou,Mei Tie,Xiaolei Fu,Yuefeng Zhao,Haizhou Chang,Yuqing Miao
A novel indium doped bismuth hybrid nanofilm was prepared on a glassy carbon electrode (Bi@In/GCE) and successfully used for the simultaneous measurements of aqueous zinc (Zn(II)), cadmium (Cd(II)) and lead (Pb(II)). The Bi@In hybrid nanofilm was greatly improved in the ability of electron transfer, surface morphology as well as hydrophilicity over single Bi or In film, and exhibited well-defined and separate peaks for Zn(II), Cd(II) and Pb(II) by square wave stripping voltammetry. Analytical characteristics of the developed Bi@In/GCE were explored by comparing with single Bi and In film modified electrodes with calibration curves, which exhibited the most preferable electrochemical behaviors toward three metals as predicted. The synergistic effect of Bi and In mainly contributed to the enhanced electrochemical activity of the new electrode. In the concentration range of 0-120 µg L -1 , a good linear relationship was achieved between the peak current and the metal concentration with correlation coefficient higher than 0.995. The detection limits were calculated to be 0.52, 0.15 and 0.67 µg L -1 for Zn(II), Cd(II) and Pb(II) (S/N=3), respectively. The analysis of river sample with Bi@In/GCE was performed with satisfactory recoveries higher than 98%, suggesting that the new method is promising as a simple, sensitive and efficient approach to detect the heavy metals in water samples.
研究领域:
分析化学
·
环境监测
·
电化学传感
·
纳米材料
·
水污染检测
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2016
·
IF 3.997
XinRong Liu,Ming Zhang,TingTing Yang,LiNa Wang,Han Zhu,ShunLi Wang,MingLiang Du
Carbon nanofibers served as nanoreactors for the design and construction of PtCo alloy carbon core-shell nanostructures with nitrogen doping (PtCo/NCNF) through a combination of electrospinning and nitrogen doping treatments. The PtCo/NCNF hybrid consists of PtCo alloy nanoparticles surrounded by a few of N-doped carbon layers , demonstrating a typical core-shell structures. The PtCo/NCNF hybrid can both served as electrode materials for electrocatalytic water splitting including hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For the HER performance, the PtCo/NCNF exhibits very small onset potential of 20 mV, an overpotential of 50 mV at a j (vs RHE) = 10 mA cm − 2 and Tafel slope of 30 mV dec − 1 . The PtCo/NCNF hybrid also exhibits high OER activity with an onset potential of 310 mV, an overpotential of 400 mV at a j of 10 mA cm − 2 and a small Tafel slope of 76 mV dec − 1 . The high catalytic activities of PtCo alloy for HER and OER originate from the 3D hierarchical structures, well-dispersed PtCo alloy, high conductivity of NCNF, protection from the carbon-encapsulated structure, and the introduction of nitrogen.
研究领域:
材料科学
·
纳米技术
·
电化学
·
能源化学
·
催化化学
·
功能材料
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2017
·
IF 4.364
Puhong Wen,Lili Ai,Fenyan Wei,Dengwei Hu,Jingjing Guo,Fangyi Yao,Taotao Liu
The crystalline hexagonal Nb 2 O 5 (H-Nb 2 O 5 ) nanobelt clusters dominantly exposed (− 110) facet are firstly synthesized by a hydrothermal topological reaction with a precursor of fiber-like K 2 Nb 2 O 6 ·H 2 O. The structure and morphology of samples obtained at different temperatures and times are investigated. There are two steps in the synthesis process. One is the acid-exchanging reaction transforming into amorphous phase protonated niobate (HNO), and the other is dehydration reaction transforming into H-Nb 2 O 5 , and simultaneous dissolution reaction which forms nanobelt cluster morphology from the fiber-like particle. The formation mechanism of H-Nb 2 O 5 nanobelt clusters has been proposed in detail. After photo-reduced reaction between the H-Nb 2 O 5 nanobelt clusters and AgNO 3 solution, the dominantly exposed (− 110) facet of H-Nb 2 O 5 nanobelt is homogeneously covered by Ag nanoparticles . The photo-electrochemical performance of the obtained H-Nb 2 O 5 nanobelt clusters and Ag deposited H-Nb 2 O 5 (Ag-Nb 2 O 5 ) nanobelt clusters as photocatalysts are evaluated by splitting water under simulated sunlight illumination, and the generated photocurrent of Ag-Nb 2 O 5 sample is 10.73 μA, which is 535 times that of the H-Nb 2 O 5 sample. The results demonstrate that the Ag-Nb 2 O 5 nanobelt clusters have a high photo-electrochemical performance as well as good sunlight photoelectric conversion efficiency.
研究领域:
材料科学
·
纳米科技
·
光催化
·
能源化学
·
半导体材料
·
电化学
·
太阳能转换
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMISTRY
·
2014
·Vol. 33
·期 1
·125-130
·
IF 1.04
Ting Zhou,Hao Yu,Mingqiang Liu,Ying-Wei Yang
Carboxylated pillar[5]arene (CP5) macrocycles were modified onto the surface of reduced graphene oxide (RGO) via covalent bonds to form new pillarene-functionalized RGO nanosheets, i.e. , RGO-CP5. The obtained RGO-CP5 nanosheets capable of molecular recognition exhibited much better water-dispersibility and enhanced fluorescence-quenching property as compared with native RGO. This new sensing platform holds great potentials in the sensing and detection of analytes, such as organic dye molecules and pesticides, in aqueous solutions.
研究领域:
分析化学
·
纳米材料科学
·
传感器技术
·
环境监测
·
分子识别
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Shaojie Zhang,Chao Yu,Na Liu,Yun Teng,Cuiyu Yin
In this study, cellulose pulp and urea were used to synthesize cellulose carbamate (nitrogen content reaches 4.5%) by low-cost and environmentally friendly solid-liquid phase method. Cellulose carbamate fluid was prepared by using sodium hydroxide aqueous solution as solvent. The fluid was regenerated and formed in a coagulation bath , and finally a regenerated cellulose membrane with high transparency and separation ability was obtained. The simple chemical treatment of cellulose not only greatly increased the mass fraction of cellulose dissolution (It has reached 15%) and retains the original crystal form and thermal stability of cellulose. The surface of the membrane was relatively dense, and the inside has regular microchannel . The factors affect the transparency and water flux of regenerated cellulose membranes were discussed by orthogonal experimental range analysis. The ability of the regenerated cellulose membrane to reject dyes was tested. The results showed that the rejection of methyl blue and congo red reached 100%, and the rejection rate of methyl orange reached 60%. The oil/water separation ability and the anti-pollution ability of the regenerated cellulose membrane were tested. The oil/water separation effect reached 100%. This membrane may have application prospect in water treatment, biotechnology.
研究领域:
材料科学
·
环境工程
·
膜技术
·
高分子化学
·
水处理
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2019
·
IF 3.131
Yanqi Gu,Shayu Li,Yuehong Xu,Jiaguang Han,Miao Gu,Zhipeng Cai,Yan lv,Guoxin Xie,Tianbao Ma,Jianbin Luo
The influence of an external magnetic field on the picosecond network dynamics of the salt (KCl) solution is investigated by terahertz time-domain spectroscopy. Because hydration changes the motions of water molecules clusters, we test hydration by measuring the change of dielectric loss caused by the slow relaxation of water molecules clusters. We find experimentally that the magnetic field enhances the number of water molecules involved in hydration and the radius of dynamic hydration layer in salt solutions. However, with the increasing concentration, there is a downward in the hydration enhancement per equivalent. Meanwhile, the simulated results show the number of water molecules in hydration layers increases which is consistent with our experimental results. Besides, the simulation reveals that external magnetic field mainly affects the second hydration layer and the stability of water molecules network in hydration layer is enhanced with external magnetic field .
研究领域:
物理化学
·
生物物理
·
分子生物学
·
光谱学
·
溶液化学
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Zanru Guo,Hongjian Gu,Qiang Chen,Zhanfeng He,Wenyuan Xu,Jiali Zhang,Yongxin Liu,Leyan Xiong,Longzhen Zheng,Yujun Feng
Hypothesis The effective separation and recovery of oils from water is important for the protections of ecosystems and the environment. Polymeric porous monoliths have been demonstrated as attractive absorbents for oil/water separation. However, the recyclability was mainly realized by squeezing, combustion, or centrifugation, which may restrict in elastic materials, destroy the adsorbates or need special apparatus. Thus it is desirable to developing monoliths with controllable oil absorption and desorption. Experiments A series of “smart” monoliths with pH-induced switchable wettability were fabricated by high internal phase emulsion (HIPE) polymerization and epoxide ring-opening for the incorporation of amine groups. The resultant monoliths and their wettabilities were examined using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), nitrogen adsorption/desorption and contact angle analysis, respectively. The oil separation efficiency and recyclability were evaluated. Findings The monoliths with macroporous structure can undergo switchable wettability under reversible pH stimulation. As an absorbent, the monoliths not only separated and recovered organic solvents and oils (including crude oil) from aqueous mixtures through a reversible and recyclable absorption and desorption process upon alternating the pH between 7.0 and 1.0, but also continuously expulsed oils from water surfaces in a continuous manner with the aid of external driving pressures. Moreover, the monoliths also allowed the effective separation of surfactant-free and surfactant-stabilized oil-in-water emulsions with high separation efficiency.
研究领域:
环境科学
·
高分子材料
·
分离科学
·
界面化学
·
功能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 55
·34461-34465
·
IF 3.108
Tingting Zheng,Ang Li,Zhanying Li,Wenbin Hu,Lin Shao,Lingbin Lu,Yang Cao,Yongjun Chen
As an environmentally friendly aerogel with outstanding performances, the improvement of mechanical properties is urgently required for cellulose aerogel development. In this study, a cellulose aerogel with good mechanical properties was successfully fabricated using nanocrystalline cellulose (NCC) as reinforcer. Characterization results demonstrated that NCC was embedded well into the cellulose aerogel. Tests and evaluation showed that the compressive modulus of the NCC reinforced cellulose aerogel was significantly improved, about 6 times higher than that of the pure cellulose aerogel. Furthermore, after modification with trimethylchlorosilane via a cold plasma treatment, the NCC reinforced aerogel became hydrophobic but its oleophilic property remained. This aerogel showed good adsorption capacity, reached saturation rapidly and possessed good reusability. Reinforced mechanical properties with NCC make this cellulose aerogel a very promising material for highly efficient separation and extraction of organic pollutants and oils from water.
研究领域:
材料科学
·
高分子化学
·
环境功能材料
·
纳米复合材料
·
绿色材料
✓ 已验证
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2018
·
IF 2.906
Bo Lin,Jian Chen,Zeng-Tian Li,Fu-An He,De-Hao Li
In this work, the fluoroalkylsilane-modified SiO 2 nanoparticles (NPs) were immobilized on the polyurethane sponges by a highly efficient drop-coating method using different polymers including poly(vinylidene fluoride), poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorotrifluoroethylene), polystyrene , and polyurethane as the adhesives to achieve the superhydrophobic modification of the polyurethane sponges for oil-water separation. The successful fluoroalkylsilane modification for the SiO 2 NPs was confirmed by TEM, SEM , FITR, XPS, and TGA. Furthermore, the surface-modified polyurethane sponges were investigated by SEM and two-dimensional EDS mapping. The contact angles of the surface-modified polyurethane sponges were in the range of 151.6°–154.3°, which confirmed the realization of the superhydrophobic modification for the polyurethane sponges. The demonstration experiments showed that the resulting surface-modified polyurethane sponge could effectively remove oil from the oil-water mixture by direct absorption or gravity-driven filtration. Moreover, the surface-modified polyurethane sponges possessed not only high absorption capability for different oils including peanut oil, pump oil, and silicone oil but also good reusability . We believe that such novel surface-modified polyurethane sponges might be potential candidates for the oil-water separation.
研究领域:
材料科学
·
环境工程
·
纳米技术
·
表面化学
·
分离科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）