JOURNAL OF MOLECULAR LIQUIDS
·
2019
·
IF 4.561
Qi Liu,Xiaoxiao Chen,Yan Guo,Chuanhong Han,Jing Li,Lihan Jia,Jie Liu,Xilian Wei
A ternary phase diagram of the system of 1-butyl-3-methylimidazolium tetrafluoroborate ([ Bmim ]BF4), sodium dodecylbenzenesulfonate (SDBS) and water using ocular estimate and turbidity method was drawn based on experimental data at 298.2 K. We got a narrow aqueous two-phase region near the side of water-ionic liquid (IL). A series of samples with different compositions around the phase diagram were chosen. The enthalpy change of these systems after injecting triply distilled water into these samples has been studied by using isothermal titration microcalorimetry (ITC). It is found that with increasing the water content there are weak endothermic and exothermic processes appearing, separately, which matches perfectly with the location of the formation and disappearance of the aqueous two-phase in the ternary phase diagram. This suggests the ITC is a feasible and effective method for the thermodynamic study of aqueous two-phase systems (ATPS) and was first reported. The experimental results show that the formation of the ATPS is endothermic (Δ H > 0), but the process of disappearing is exothermic (Δ H < 0). Due to the formation of aqueous two-phase is a thermodynamic spontaneous process under the isothermal constant pressure, we can judge that the formation of this ATPS is an entropy driven course and the vanishing is a synergy driven process by entropy and enthalpy.
研究领域:
物理化学
·
热力学
·
胶体与界面化学
·
分离科学
·
分析化学
✓ 已验证
DOI
高影响因子
IONICS
·
2018
·Vol. 25
·期 1
·241-251
·
IF 2.347
Wen Xinge,Dong Tao,Liu Ao,Zheng Shuohang,Chen Shimou,Han Yifan,Zhang Suojiang
As a polymer host, one polymeric ionic liquid poly(methyl methacrylate-1-vinyl-3-ethyl-imidazolium bis(trifluoromethylsulfonyl) imide) (abbr. P(MMA-co-VEImTFSI)) was successfully synthesized and characterized. Four poly(vinylidene fluoride-co-hexafluoropropylene) (abbr. PVDF-HFP)-based polymer electrolytes were prepared by blending 0, 5,15, and 25 wt% P(MMA-co-VEImTFSI). The electrochemical performances of the prepared electrolytes were studied carefully. The results revealed that increasing the polymeric ionic liquid content, the ionic conductivity of the polymer electrolytes could be enhanced and it obeyed the Arrhenius rule. The highest ionic conductivity of the polymer electrolytes was up to 2.09 × 10 −3 S cm −1 at room temperature. The polymer with 25 wt% polymeric ionic liquid showed an excellent electrochemical performance for supercapacitor electrolyte. After 2000 cycles, the retention of capacitance in P(MMA-co-VEImTFSI)-based polymer electrolyte was above 80%. It implied that the present P(MMA-co-VEImTFSI) polymeric ionic liquid was a decent component candidate in the high-performance polymer electrolytes.
研究领域:
材料科学
·
电化学
·
高分子化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Yuxiao Li,Meishan Zhang,Xueyan Wang,Zhun Li,Lianhua Zhao
Sulfonated poly (ether ether ketone) (SPEEK, SP) with tetraethoxysilane (TEOS) and diethylethylammonium trifluoromethanesulfonate ([dema] [OTf]) were used to make SP/SiOx/OTf inorganic–organic composite membranes by the sol–gel method. The composite membranes were studied with respect to their structural, thermal, ionic liquid leeching (ILs), mechanical, and proton conduction properties. Fourier transform infrared spectroscopy (FT-IR) results showed that there exist intermolecular forces between the sulfonic groups, silica, and ILs in the composite membrane. Thermogravimetric (TG) results showed that the thermal stability of the SP/SiOx/OTf composite membrane is better than that of the pristine SPEEK membrane. IL leaching studies showed that the sulfonic group could help to reduce the loss of ILs. The introduction of silica in the SP/SiOx/OTf composite membrane could further reduce the loss of ILs, and also reduce the swelling degree of the composite membrane. Dynamic mechanical analysis (DMA) data showed that the introduction of silica can increase the flexibility of membranes, and improve the mechanical properties. A proton conductivity of 2.003 × 10 −2 S/cm was obtained for a 50 wt% [dema][OTf] doped SP-66/SiOx/OTF-50 composite membranes at 220 °C under anhydrous conditions.
研究领域:
材料科学
·
高分子化学
·
能源材料
·
电化学
·
膜科学
✓ 已验证
DOI
高影响因子
PHOTOCHEMISTRY AND PHOTOBIOLOGY
·
2013
·Vol. 89
·期 5
·1262-1268
·
IF 2.287
Zhi-Yuan Yan,Bing Yan
Rare earth doped fluorides (BaMgF 4 , aYF 4 and BaYF 5 /BaLuF 5 ) have been synthesized and dispersed in an ionic liquid compound, (3-triethoxysilyl) propyl-3-methylimidazolium chloride (denoted as IM + Cl − ). Through the cohydrolysis and copolycondensatoin reaction between the alkoxy group (3-triethoxysilyl) of IM + and tetraethoxysilane in the presence of carboxylic acids (formic acid) as catalyst and water source, luminescent hybrid ionogels form subsequently. 1 H NMR spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy and especially up-conversion (UC) luminescence spectroscopy are used to characterize the precursors and the resulted hybrid ionogels. These hybrid ionogels exhibit the UC luminescence properties of immobilized rare earth fluoride nanocrystals (BaMgF 4 , NaYF 4 and BaYF 5 /BaLuF 5 ) doped Er 3+ /Tm 3+ , Yb 3+ .
研究领域:
材料科学
·
纳米科技
·
无机化学
·
功能材料
·
光子学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Junwang Zhang,Lili Song,Kunlan Li,Qingda An,Hao Ma,Liyu Yang,Ligang Wei
Water addition was found to enhance the thermal stability of alkylimidazolium–acetate ionic liquids (ILs). Especially in the case of high water content (30–50 wt%), few decomposition products can be observed in the 1 H NMR spectra even after treatment for 24 h at 150 °C. On the basis of this finding, lignin treatment of water and acetate IL mixtures (50–90 wt% IL content) were investigated at 150 °C. The addition of water, as opposed to pure IL treatment, can inhibit the lignin depolymerization into small fragments. Lignin degradation and the structure of regenerated lignin are more affected by cation types of ILs rather than the IL contents and pH values. In the case of 50–70 wt% 1-ethyl-3-methylimidazolium acetate–water system, the specific inter-unit linkages of lignin can be broken down, and regenerated lignin with a narrow polydispersity index (5.0–9.6) can be obtained.
研究领域:
绿色化学
·
生物质转化
·
高分子化学
·
离子液体化学
·
木质素化学
·
可持续材料
·
热化学转化
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2014
·
IF 2.354
Ni Cheng,Xiaoyuan Ma,Xiang Sheng,Tao Wang,Rui Wang,Jingjing Jiao,Li Yu
Two structurally similar imidazolium-based anionic surface active ionic liquids (SAILs) with double hydrocarbon chains, viz. 1-butyl-3-methylimidazolium bis(2-ethylhexyl) sulfosuccinate (C 4 mim-AOT) and 1-butyl-3-methylimidazolium bis(2-ethylhexyl) phosphate (C 4 mim-DEHP), were synthesized by a straightforward ion-exchange technique. A comparative investigation of their aggregation behavior with the corresponding traditional anionic surfactants, sodium bis(2-ethylhexyl) sulfosuccinate (Na-AOT) and sodium bis(2-ethylhexyl) phosphate (Na-DEHP) in aqueous solution was performed in detail by surface tension, electric conductivity, fluorescence spectra and dynamic light scattering measurements. The critical micelle concentration (CMC) values for the surfactants with double hydrocarbon chains obtained by different techniques are in good agreement. The surface activity of C 4 mim-AOT and C 4 mim-DEHP is superior to that of the corresponding traditional anionic surfactants, Na-AOT and Na-DEHP. It is also found that for anionic SAILs the nature of the anionic active group is a dominant factor in the determination of their aggregation behavior in aqueous solution, e.g. CMC and aggregation number, while the introduced organic cation plays a minor role. Theoretical calculations show that more conformations and electronegativity for DEHP anion leads to higher aggregation number and CMC values for C 4 mim-DEHP. This work is expected to be of practical values for the environmental friendly anion SAILs in nanomaterial synthesis and phase separation, etc.
研究领域:
物理化学
·
胶体与界面化学
·
纳米材料合成
·
环境友好材料
·
分子自组装
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2015
·
IF 2.729
Shuang Xia,Xiao-Min Zhang,Kuan Huang,Yong-Le Chen,You-Ting Wu
Physical and electrochemical characteristics of aluminium secondary battery systems based on aluminium anodes, sulfur–carbon cathodes and ionic liquid electrolytes were investigated. Aluminium chloride (AlCl 3 )/triethylamine hydrochloride (Et 3 NHCl) ionic liquids were used as the electrolytes. Toluene, benzene, dichloromethane (DCM), and 1,2-dichlorethane (DCE) were tested as the additives to modify the performance of ionic liquid electrolytes. DCM and DCE were found to be the better choices, with 0.2 as the optimized volume ratio of organic solvent to ionic liquid. The additives have functions of reducing the viscosities and elevating the conductivities of ionic liquid electrolytes, while having little influence on the thermal stability of battery system in normal working temperature range. To assess the electrochemical properties of the electrolytes, galvanostatic charge/discharge studies were performed at the cell voltage of 2.4 V to 0.6 V at a constant current discharge of 15 mA/g. The cell exhibits well-defined discharge voltage plateaus near 1.8 V. A discharging capacity of 113.64 mAh/g at the first cycle is obtained for the cell based on DCM-ionic liquid electrolyte, in comparison with 85.23 mAh/g for the cell based on pure IL. The discharging capacity has the highest value of 131.67 mAh/g, and remains 104.69 mAh/g after 40 cycles. This study indicates that the performance of aluminium secondary battery can be greatly improved by adding a small volume of organic additives to the ionic liquid electrolytes.
研究领域:
电化学
·
能源材料
·
电池技术
·
物理化学
·
功能材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING RESEARCH & DESIGN
·
2018
·
IF 2.795
Maogang He,Siqi Liu,Lihang Bai,Xiangyang Liu
Magnetic ionic liquids (MILs), combines the general properties of ionic liquid with magnetic properties, are starting to attract interest in the field of propane/propylene separation and CO 2 capture. Solubility data of propane, propylene, cyclopropane and CO 2 in magnetic ionic liquid 1-butyl-3-methylimidazolium tetrachloroferrate [bmim][FeCl 4 ] at temperatures of (303, 313, 323, 333, 343) K and pressures up to 3300 kPa were determined in the present work. The relative expanded uncertainty of solubility measurement is estimated to be less than 4% with a level of confidence of 95%. The Henry’s constants for the four gases in [bmim][FeCl 4 ] and selectivity of C 3 H 6 /C 3 H 8 in [bmim][FeCl 4 ] were calculated. And the thermodynamic properties of solvation concerned about the Gibbs energy (Δ sol G ∞ ), the enthalpy (Δ sol H ∞ ) and the entropy (Δ sol S ∞ ) of solvation were also obtained to offer knowledge for understanding the progress of gases dissolved in [bmim][FeCl 4 ]. The experimental results were correlated with a modified KK equation and NRTL equation.
研究领域:
化学工程
·
分离科学
·
物理化学
·
环境化工
·
绿色溶剂技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 11
·期 36
·19536-19545
·
IF 11.9
Gege Wang,Feifan Zhang,Caiyu Ma,Jianhua Yang,Xiaowei Chi,Yu Liu
Aqueous zinc metal batteries (AZMBs) as one of the next-generation energy storage technologies have attracted both academic and industrial attention due to their high safety, low cost, and high specific energy, yet are facing interfacial challenges at the electrolyte/anode interface, e.g. uneven physical diffusion of Zn2+ flux, severe chemical corrosion, and disordered electrochemical deposition behavior of the zinc metal anode. To address these issues, herein, we propose a facile and effective electrolyte modulating strategy to construct a physico-chemo-electrochemically coupled stable interface between the aqueous electrolyte and zinc anode. The aqueous electrolyte modified using a tiny amount of water-soluble ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF4) can form a positively charged organic EMIM+ adsorption layer and a protective inorganic Zn2+-conducting layer through the in situ decomposition of BF4− on the zinc anode surface, thus effectively homogenizing the Zn2+ diffusion flux and decreasing the chemical corrosion rate. Moreover, EMIM+ provides an electrostatic shielding layer, leading to the preferential and ordered electrodeposition of Zn2+ along the Zn (002). Benefiting from this physico-chemo-electrochemically multifunctional interfacial layer, the Zn//Zn symmetric cells achieve a considerably extended lifespan of up to 1200 h at 5 mA cm−2 and 5 mA h cm−2, and more than 450 h even at an ultrahigh current density and large deposition capacity (10 mA cm−2 and 10 mA h cm−2). Zn//Cu asymmetric cells also exhibit excellent reversibility with a high coulombic efficiency of 99.75%. Furthermore, the physically, chemically, and electrochemically stabilized interface enables the AZMB with a quinone-based cathode to offer high specific capacity (256.9 mA h g−1) and a decent capacity retention rate (83.9% after 300 cycles).
研究领域:
电化学
·
能源材料
·
界面科学
·
储能技术
·
材料化学
✓ 已验证
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2022
·
IF 6.449
Min Guan,Xingye An,Hao Zhang,Guihua Yang,Zhongjian Tian,Shuangxi Nie,Liqin Liu,Zhengbai Cheng,Haibing Cao,Hongbin Liu
Global liquid packaging industry has been greatly spurred by the rapidly growing food & beverage industry all over the world. Liquid packaging board (LPB), as the main composition (75–80 %) of laminated liquid packaging cartons, must possess high-quality of hydrophobicity and physical properties for excellent leak-proof and protecting the packaged commodity. Herein, in this study, lignin is selected to prepare lignin cationic surfactant (LCS) by quaternary ammonium modification. Then cationic lignin modified rosin size ( L -CDRS) with uniform microsphere structure and high colloidal stability is successfully synthesized via a phase inversion process to improve the sizing performance and mechanical properties of LPB. The cation modified LCS presents improved amphipathicity of rich cationic charges and hydrophobic benzene ring skeleton, thus enhancing the electrostatic interactions between LCS and pulp fibers and improving the sizing performance of L -CDRS. The sizing performance of LPB is evaluated by varying the LCS dosages within L -CDRS and concluded that the edge penetration value and Cobb value of LPB handsheets exhibit an improved size performance with 2 % LCS within L -CDRS, implying the formation of homogeneous hydrophobic surface layer induced by the well-distribution of L -CDRS. In addition, the tensile index of LPB increased from 19.74 N·m/g to 25.96 N·m/g assisted by 2 % LCS emulsified L -CDRS, indicating an improved mechanical property. This study puts forward a practical and facile strategy to improve the sizing performance and mechanical properties facilitated by lignin enhanced rosin size and will further broaden the application range of traditional rosin size and lignin in LPB products.
研究领域:
造纸工程
·
高分子材料
·
表面化学
·
生物质利用
·
包装材料
✓ 已验证
DOI
高影响因子
International Journal of Refrigeration
·
2019
·
IF 3.177
Qing Cheng,Wang Pei
As different liquid desiccants show different dehumidification and operation characteristics, the comprehensive performance comparison between two liquid desiccants (LiCl and LiBr aqueous solutions) was conducted in this paper. The electronic conductivity of the LiBr aqueous solution was experimentally investigated and the electronic conductivity model of the LiBr solution was acquired. Compared with the LiCl solution, the LiBr solution has higher electronic conductivity within the concentration range of 20–40% and the temperature range of 20–60 °C, which means the ED regenerator using LiBr solution has lower electric resistance. The increase of the liquid desiccant concentration is beneficial to the moisture removal rate but harmful to the whole system COP and dehumidification efficiency, while the effect of the liquid desiccant temperature is opposite. Within the liquid desiccant temperature range of 20–30 °C, the whole system COP varies among 1 and 2.8 for the LiCl solution with the concentration of 38% at the exit of the ED regenerator, and it is among 2.5 and 5.8 for the LiBr solution with the concentration of 55% after regeneration. Using the LiCl solution can give the system the better dehumidification potential, while using LiBr solution can help the system to acquire the better whole performance and economy.
研究领域:
热能工程
·
暖通空调
·
化学工程
·
能源利用
·
环境控制技术
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2021
·
IF 6.165
Jing Fan,Liangliang Fan,Shuangshuo Liu,Fenhong Song
Globally, biofuel is considered as the largest renewable energy source to substitute the petrochemical fuel and it is thus received a great amount of attention from both developed countries and developing countries. Among all the biofuels, biodiesel is strongly recommended as a promising alternative fuel for traditional internal combustion engines. Thermal conductivity is an essential transport property of fuel, and is vital in the flow and heat transfer process. Therefore, it is necessary to conduct the research associated with fuel’s thermal conductivity . In this work, four binary fuel mixtures containing biodiesel components methyl caprate and ethyl caprate with n-undecane and n-tridecane were prepared respectively, and the liquid thermal conductivity of which were measured by the transient hot wire method system. The measurement was conducted at the temperature from 292 K to 362 K at atmospheric pressure. The experimental data reported here have an uncertainty of less than 2%. In addition, a correlation about the relationship between the liquid thermal conductivity with temperature and the esters’ concentration in different fuel blends has been correlated.
研究领域:
燃料化学
·
热物理性质
·
可再生能源
·
生物燃料
·
传热传质
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）