ADVANCED FUNCTIONAL MATERIALS
·
2019
·Vol. 29
·期 38
·1904416
·
IF 15.621
Huai Yang,Longfei Pan,Xiaoting Wang,Hui-Xiong Deng,Mianzeng Zhong,Ziqi Zhou,Zheng Lou,Guozhen Shen,Zhongming Wei
Mixed-valence states can bring unexpected unique phenomena, especially novel anisotropic physics, due to structural asymmetry, which originate from the discrepant distribution of atoms with different valence. This study reports an unexploited mixed-valence-driven quasi-1D Sn II Sn IV S 3 crystal, which exhibits widely and distinctively anisotropic polarized-light absorption reaching ≈3.4 from the deep ultraviolet to near-infrared region (250–850 nm). The fabricated polarization-sensitive photodetectors based on highly air-stable Sn II Sn IV S 3 nanowires display strong linear dichroism among the UV–vis–NIR spectrum with responsivity exceeding ≈150 A W −1 . Furthermore, the devices are further constructed onto a flexible polyethylene terephthalate (PET) substrate and the photoresponse remains roughly unchanged after repeated bending. This work based on novel mixed-valence-driven quasi-1D ternary sulfide Sn II Sn IV S 3 excites interest in low-symmetry semiconductors for developing broadly spectral polarization-sensitive photodetectors with environmental stability and mechanical flexibility.
研究领域:
材料科学
·
半导体物理
·
纳米光学
·
光电子学
·
凝聚态物理
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2019
·
IF 2.291
Yuanbo Xie,Fangyuan Zhong,Hongxu Chen,Danni Chen,Jiawen Wang,Junkuo Gao,Juming Yao
In this paper, novel hydrogen-bonded metal-complex frameworks MPM-1-TIFSIX and HOF-21 were selected as adsorbents to adsorb iodine. MPM-1-TIFSIX and HOF-21 were prepared by layering method and mixed stirring method, respectively. The structures of the two HOFs were characterized in detail by XRD , BET, TGA and FT-IR. The adsorption behavior and adsorption capacity of MPM-1-TIFSIX and HOF-21 for iodine were investigated in detail. The experimental data showed that the equilibrium adsorption amounts of MPM-1-TIFSIX and HOF-21 were 205.51 mg/g and 172.86 mg/g, respectively. The adsorption process of MPM-1-TIFSIX was conformed to be pseudo-second-order kinetic, while the adsorption process of HOF-21 was conformed to be pseudo-first-order kinetic. The results indicated that HOFs could be used as iodine capture and storage materials.
研究领域:
材料化学
·
环境化学
·
配位化学
·
多孔材料
·
吸附科学
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 21
·7143-7151
·
IF 4
Lu Liang,Xiaohui Li,Xiaoge Wang,Zhaoji Luo,Kun Lin,Qiang Li,Sihao Deng,Lunhua He,Xiaojun Kuang,Xianran Xing
Mixed electronic and oxide ionic conduction was enabled in digermanate-type La2−xCaxGe2O7−x/2 containing Ge3O10 chains and isolated GeO4 units by substitution of La3+ with Ca2+. The structure and solid solution limit of Ca doped La2Ge2O7 were studied by systematic experiments, including rotation electron diffraction (RED), X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments, etc. The preferred occupation of Ca2+ and oxygen vacancies was investigated by Rietveld analysis of the NPD data. The obtained conducting material La1.925Ca0.075Ge2O6.963 exhibits superior thermal stability and an order of magnitude improvement in conductivity compared to the parent La2Ge2O7 (∼9 × 10−5 S cm−1 at 1000 °C). BVEL calculations reveal that the oxygen vacancies were stabilized and transported within the framework of La2Ge2O7 by sharing oxygen and oxygen exchange between the adjacent Ge3O10 chains and GeO4 units, exhibiting a three-dimensional oxide ion transport nature.
研究领域:
无机化学
·
固态离子学
·
功能材料
·
结构化学
·
能源材料
·
晶体化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2019
·
IF 7.015
Jian Zhou,Dan Sun,Lei Wang,Leiming Guo,Wei Chen,Fengjiao Yu,Yong Wang,Yang Yang
Mixed-matrix membranes blended with nanosized inorganic fillers have been widely used in ultrafiltration (UF) for large molecule separation. In this work, we provide a feasible route to construct mixed-matrix polysulfone (PSf) UF membranes via the nonsolvent-induced phase inversion process, utilizing sheet-like copper iodide superstructures (s-CuI) as fillers. The size of s-CuI in lateral dimension reaches micrometer scale, but the nanosheets can be well embedded in the polymer matrix with their 2D basal planes parallel to the membrane surface . On account of the stacking straight-through channel structure of s-CuI and its large dimension spanning across multiple membrane pores within the layer, the PSf membrane blended with 0.8 wt% content of s-CuI displays optimal UF performance with a pure water permeation (PWP) of 1473 L/(m 2 h bar) and a bovine serum albumin (BSA) rejection of 92%. In contrast, the pure PSf membrane only presents a PWP of 556 L/(m 2 h bar) and a BSA rejection of 58.2%. Besides, the enhancement of mechanical stability for the PSf/s-CuI 0.8% membrane is significant and the leakage of the s-CuI filler is negligible. Though the antifouling performance of the PSf/s-CuI 0.8% membrane against the protein BSA is limited, its flux is always 2–3 times higher than that of the pure PSf membrane in each step during a sequential test of fouling behavior . This study indicates that it is highly promising to employ designable superstructures as functional fillers to construct novel mixed-matrix membranes with good interfacial compatibility and superior performance.
研究领域:
材料科学
·
膜分离技术
·
高分子化学
·
纳米复合材料
·
生物分离工程
✓ 已验证
DOI
高影响因子
MATERIALS LETTERS
·
2014
·
IF 2.269
Yaguang Yuan,Yanping Yuan,Nan Zhang,Yanxia Du,Xiaoling Cao
Capric–myristic–palmitic acid ternary eutectic mixture (CA–MA–PA) was prepared as phase change material (PCM). A novel composite PCM of CA–MA–PA/expanded graphite (EG) with an optimum mass ratio (CA–MA–PA:EG=13:1) was prepared by uniformly absorbing CA–MA–PA into the porous network structure of the EG. The melting and freezing temperatures of CA–MA–PA/EG composite PCM were measured by differential scanning calorimeter as 18.61 °C and 16.58 °C, respectively, while the melting and freezing latent heats were 128.2 J/g and 124.5 J/g, respectively. The thermal conductivity of the CA–MA–PA/EG composite PCM was measured as 3.67 W/m K and thus the thermal storage and release rates were significantly increased. The thermal cycling test results showed that CA–MA–PA/EG composite PCM has a good thermal reliability. All the above results show that the CA–MA–PA/EG composite PCM is a potential solution for latent heat storage system.
研究领域:
材料科学
·
能源化学
·
热物理
·
功能材料
·
储能技术
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Zuocheng Luo,Qingfeng Zhang,Wei Xie,Tong Yuan,Qisheng Zang,Ning Wang,Hanxiao Fan,Shuhong Xie,Xiaoping Ouyang
Potassium ion hybrid capacitors (PIHCs) have attracted widespread attention as combining the advantages of potassium ion batteries (PIBs) with supercapacitors . However, the sluggish kinetics caused by the large radius of K + hinder the practical application of PIHCs. Herein, we synthesized a boron and fluorine co-doping interlaced network porous carbon nanofibers (BF-PCNFs), which was used as the freestanding anode of PIHCs the freestanding anode of PIHCs to alleviate large volume expansion and increase conductivity. Benefiting from the B, F co-doping and porous interlace nanostructure of BF-PCNFs, the anode shows 185 mA h g −1 under a load of 12.6 mg cm −2 , a reversible capacity of 176 mA h g −1 at 1000 mA g −1 after 6000 cycles, and the capacity retention from 100 mA g −1 to 5000 mA g −1 is 62%. Furthermore, the PIHCs based on BF-PCNFs as anode and activated carbon as cathode exhibit an energy density of 87 Wh kg −1 and a power density of 393 W kg −1 . The capacity retention is as high as 78% over 4000 cycles. Considering the exceptional rate performance, long cyclability and high-mass-loading, our work may supply a new strategy for designing novel energy storage devices with outstanding performance.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米科技
·
功能材料
✓ 已验证
DOI
高影响因子
BIOCHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 3.978
Jia-Li Gu,Wen-Yan Pi,Wei-Feng Xie,Jia-Wen Gu,Ya-Jun Wang,Li Xiao,Yong-Jin Li,Jing-Fen Li
The present work is aimed to improve the antibody adsorption performance of phenyl-based mixed-mode adsorbents by adjusting the functional group of ligand. Two new mixed-mode adsorbents coupled with 4-(aminomethyl)phenol (AMP) and 4-(aminomethyl)benzonic acid (AMA) were designed based on the structure of benzylamine (BA), where a hydroxyl or carboxyl group was introduced. Bovine serum Immunoglobulin G (IgG) and bovine serum albumin (BSA) were used as the model proteins. The adsorption isotherms of IgG and BSA were investigated at different pH values ranging from 4.0–8.9 to evaluate the adsorption performance, and protein-ligand molecular interactions were explored through addition of sodium chloride and glycerol. The results showed that both of adsorbents coupled with AMP or AMA had lower saturated binding capacities ( Q m ) towards BSA and higher adsorption capacity ratio of IgG to BSA when compared to BA-based adsorbents. The contributions of electrostatic interactions and hydrophobic interactions to proteins binding were different among these phenyl-based mixed mode adsorbents. Finally, AMP-based adsorbent possessing high adsorption capacity ratio of IgG to BSA and salt tolerance was selected to separate IgG from mimetic serum with purity higher than 96 %. The results indicated adjusting the functional groups of ligand to regulate the electrostatic and hydrophobic interactions of protein-ligand was useful to improve the antibody separation performance of mixed-mode adsorbents.
研究领域:
生物分离工程
·
免疫学
·
生物材料
·
蛋白质工程
·
生物制药
·
分子识别
·
层析技术
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2020
·
IF 5.065
Yu Dong,Tiantian Ping,Xiaoqin Shi,Shufeng Shen
Nonaqueous amine-based blends have great potential for energy-efficient CO 2 absorbent. In this work, densities and viscosities were measured for liquid binary mixtures of 2-(ethylamino)ethanol (EAE) and 2-(butylamino)ethanol (BAE) with 2-butoxyethanol (EGBE) at temperatures of (293.15–353.15)K over the entire concentration range and atmospheric pressure. Intermolecular interactions between EGBE and two secondary amines with different carbon chain length were discussed. The excess molar volume ( V E ), viscosity deviations ( ∆η ) and excess Gibbs free energy ( ∆G ⁎ E ) were calculated from the experimental data and also correlated with the Redlich-Kister equation to estimate the binary interaction parameters. The experimental data and the calculated from the proposed correlations for the studied binary mixtures matched well each other, with AADs within 0.01% and 1.45% for density and viscosity respectively. The variation of excess properties was also discussed in terms of intermolecular interactions. Weak interactions on mixing these binary mixtures with different mass fractions were observed from the FTIR spectra analysis.
研究领域:
化学工程
·
热力学
·
流体物理化学
·
气体吸收
·
分离科学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Xiaoyu Zhao,Guangyu Li,Minghui Feng,Yanfei Wang
Compared to traditional extraction of lithium using solar evaporation, the electrochemical extraction is advantageous in many aspects, including elevated efficiency, superior selectivity, and low environmental pollution. In this study, LiNi 0·038 Mo 0·012 Mn 1·95 O 4 (LNMMO) with good lattice structure and nano morphology was successfully prepared and confirmed by XRD (X-ray diffraction), SEM-Mapping (scanning electron microscope mapping), SEM (scanning electron microscope), and EDX (Energy-dispersive X-ray spectroscopy) analyses. The pairing of LNMMO with activated carbon (AC) yielded obvious cost-effective and environmentally friendly composite when compared to conventional Noble metals used for battery anodes, such as Ag and Pt. A hybrid supercapacitor was assembled using delithiated LNMMO cathode (NMMO) and AC anode to form NMMO/AC. The cell showed high capacity, high rate performance, and excellent cyclic stability. A continuous flow NMMO/AC hybrid supercapacitor (CF-NMMO/AC) was developed for selective capture of Li + in aqueous solution by combining NMMO/AC hybrid supercapacitor with self-designed continuous flow control system. The device delivered high Li + extraction efficiencies reaching 14.4 mg/g per one cycle in simulated brine by consuming only 7.91 W h/mol Li + . The overall process produced 97.2％ Li + in simulated brine at optimized operating conditions. Overall, CF-NMMO/AC system provided higher efficiency, superior selectivity, and moderate energy utilization for Li + recovery from brine.
研究领域:
电化学
·
环境科学
·
材料科学
·
能源工程
·
分离科学
·
可持续技术
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Yiran Zhang,Bang Xiao,Lin Yang,Anqi Jiao,Ke Li,Chunping Wu,Reggie Zhan,Zhen Huang,He Lin
YSZ-based mixed-potential sensors with double-sensing electrodes were fabricated for ammonia (NH 3 ) detection. ZnO and LaCoO 3 nanoparticles prepared by flame spray pyrolysis (FSP) method were used as the sensing materials. The sensing responses of ZnO and LaCoO 3 sensing electrodes can be overlapped based on the double-sensing-electrode structure, thereby significantly enhancing the sensitivity compared with the traditional mixed-potential sensors using Pt reference electrode. The sensitivities of this sensor reached up to -102.85, -75.312, -70.165, -48.616 mV/decade to 10–50 ppm NH 3 at 450, 475, 500, 525 ℃ , respectively. Moreover, the NO 2 interference effects on NH 3 detection of ZnO and LaCoO 3 electrodes were opposite and can be counteracted based on the double-sensing-electrode structure, eliminating most of the cross-sensitivity to NO 2 . The double-sensing-electrode sensor exhibited good performance under CO, CH 4 , NO, NO 2 interference, oxygen fluctuation, and humidity variations, and showed good long-term stability. The results of sensing performance exhibited the sensors with double-sensing electrodes have a great potential for application on SCR system of diesel engines. In further studies, each sensing electrode can be optimized respectively and the sensitivity and selectivity of NH 3 sensors could be enhanced to a higher level.
研究领域:
传感器学
·
材料科学
·
环境监测
·
能源工程
·
气体传感
·
纳米材料
·
催化化学
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2024
·Vol. 12
·期 32
·2401539
·
IF 8
Qianjin Wang,Zhilin Xiang,Peizhi Yang,Yingkai Liu,Qiuhong Tan
Metal halide perovskites recently have emerged as a promising candidate for photodetection due to their exceptional photoelectric performance. However, the high dark current in these materials has hindered their practical application to imaging. In this study, a novel halogen-mixed CsPbIBr 2 microwire photodetector that has a remarkable reduction of dark current by over 100-fold (compared to CsPbBr 3 ), along with a substantial increase in photocurrent, which yields a significantly improved on/off ratio of 6.56 × 10 4 , is developed. More importantly, the halogen-mixed perovskite photodetector exhibits enhanced photodetection performance, including a high responsivity of 133 A W −1 and a remarkable specific detectivity of 4.02 × 10 12 Jones even under ultraweak light conditions as low as 4.5 nW cm −2 . More specifically, high-resolution images are successfully obtained under ultraweak light conditions. The combined analysis of experimental results and first-principles calculation attribute the excellent performance of the CsPbIBr₂ microwire photodetector to a significant reduction in dark current by suppressing ion migration and increasing carrier effective mass, and a remarkable increase in photocurrent resulting from reduced bandgap and enhanced light absorption, as compared to CsPbBr 3 . This research represents a significant advancement in the development of high-performance 1D perovskite-based photodetectors, with promising implications for ultra-weak light imaging applications.
研究领域:
光电子学
·
材料科学
·
纳米器件
·
半导体物理
·
生物医学成像
✓ 已验证
DOI
高影响因子
Education and Information Technologies
·
2023
·Vol. 28
·期 8
·10593-10615
·
IF 5.5
He Jie,Ma Tingjuan,Zhang Yongliang
This study implemented a blended learning mode with the aid of artificial intelligence teaching platform in the English language course. In this study, 110 students majoring in computer network were randomly selected as subjects, 55 of whom was the experimental group, the rest of 55 was the control group. Before the experiment, this study carried out a pretest on the two groups to determine whether there were differences between them in English learning, and verified the feasibility of the experiment. Meanwhile, a questionnaire was conducted on the learning attitude, style and evaluation of them. Then, traditional classroom teaching was adopted in the control group, and the blended learning mode based on the intelligent cloud teaching platform was used in the experimental group. After a semester of experimental research, through comparative analytics of questionnaire, experimental data and platform data with SPSS 21.0, it was found that this mode was helpful to stimulate the endogenous motivation of learning, develop the ability of autonomous learning and cooperative learning, enhance self-efficacy and educate critical thinking and speculative ability. The study concluded that blended learning can effectively promote learners to devote themselves to the whole process of learning, improve academic performance and achieve the goal of deep learning. Furthermore, this mode could also compensate for the defects of online learning and face-to-face teaching, realize big data recording and representation of teaching, learning and curriculum behavior, give full play to the multiple roles of instructors and reflect the real learning effect of learners.
研究领域:
教育技术学
·
计算机辅助教学
·
语言教育
·
学习科学
·
教育心理学
·
课程与教学论
·
人工智能教育应用
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）