CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xibao Zhang,Yonghui Xu,Xiudi Wu,Shuwen Yin,Chuansheng Zhong,Chenxue Wang,Liang Zhou,Hongpeng You
A series of novel Bi 3+ /Ln 3+ -activated Ca 2 ScSbO 6 (CSSO) phosphors were synthesized by solid-state method and their luminescent behaviors were investigated in detail. Under the 302 nm excitation, the CSSO:Bi 3+ shows remarkable near-ultraviolet photoluminescence with a peak emission at 365 nm. Eu 3+ -activated CSSO phosphor possesses high efficiency and no obvious reduction of emission intensity even after replacing Sc with Eu completely, which indicates a low-concentration quenching effect. In addition, its emission intensity at 423 K (I 423K ) still maintains 88 % compared with that of at room temperature (I 298K ), indicating good thermostability. In contrast, the CSSO:Bi 3+ phosphor exhibits a significant reduction in emission intensity, maintaining only 49 % of its luminescence at 423 K (I 423K /I 298K ). By codoping Bi 3+ and Ln 3+ (Ln = Eu, Tb, Dy, Sm), the energy transfer was observed from the Bi 3+ to Ln 3+ ions, endowing the CSSO:Bi 3+ , Ln 3+ phosphors with tunable multicolor emissions. Leveraging the differing thermostabilities of the emission spectra for Bi 3+ and Ln 3+ ions, we designed and assessed a range of sensitive optical thermometers. Among these, the CSSO:Bi 3+ , Eu 3+ phosphors exhibited the best performance, boasting maximum absolute and relative sensitivities of 9.96 % K −1 and 2.002 % K −1 , respectively. Additionally, we displayed the multi-mode anti-counterfeiting function of synthesized phosphors, and a multi-color switching system was designed with the advantages of direct visualization and easy identification of encrypted information. These results indicate that Bi 3+ and Ln 3+ coactivated CSSO phosphor has the potential application for non-contact temperature measurement and anti-counterfeiting.
研究领域:
材料科学
·
光学工程
·
无机化学
·
功能材料
·
传感器技术
✓ 已验证
DOI
高影响因子
PHOTOCHEMISTRY AND PHOTOBIOLOGY
·
2013
·Vol. 89
·期 5
·1262-1268
·
IF 2.287
Zhi-Yuan Yan,Bing Yan
Rare earth doped fluorides (BaMgF 4 , aYF 4 and BaYF 5 /BaLuF 5 ) have been synthesized and dispersed in an ionic liquid compound, (3-triethoxysilyl) propyl-3-methylimidazolium chloride (denoted as IM + Cl − ). Through the cohydrolysis and copolycondensatoin reaction between the alkoxy group (3-triethoxysilyl) of IM + and tetraethoxysilane in the presence of carboxylic acids (formic acid) as catalyst and water source, luminescent hybrid ionogels form subsequently. 1 H NMR spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy and especially up-conversion (UC) luminescence spectroscopy are used to characterize the precursors and the resulted hybrid ionogels. These hybrid ionogels exhibit the UC luminescence properties of immobilized rare earth fluoride nanocrystals (BaMgF 4 , NaYF 4 and BaYF 5 /BaLuF 5 ) doped Er 3+ /Tm 3+ , Yb 3+ .
研究领域:
材料科学
·
纳米科技
·
无机化学
·
功能材料
·
光子学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·Vol. 47
·期 83
·35352-35364
·
IF 7.139
Zhichao Yu,Wei Zhang,Yongxi Zhang,Yaokun Fu,Ying Cheng,Sanyang Guo,Yuan Li,Shumin Han
Magnesium hydroxide (MgH 2 ) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH 2 . In this work, MgH 2 –Mg 2 NiH 4 –CeH 2.73 is in-situ synthesized by introducing Ni@CeO 2 into MgH 2 . The unique coating structure of Ni@CeO 2 facilitates homogeneous distribution of synergetic CeH 2.73 and Mg 2 NiH 4 catalytic sites in subsequent ball milling process. The as-fabricated composite MgH 2 -10 wt% Ni@CeO 2 powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H 2 within 10 min at 350 °C. The apparent activation energy of MgH 2 -10 wt% Ni@CeO 2 is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.
研究领域:
材料科学
·
无机化学
·
能源化学
·
纳米催化
·
氢能源存储
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2016
·Vol. 46
·期 1
·193-199
·
IF 4.177
Dongdong Xu,Fangfang Zhang,Yanzhou Sun,Zhihua Yang,Binghua Lei,Lili Liu,Shilie Pan
A new rare-earth borate LiRb2LaB2O6 (LB-1) has been synthesized using a high-temperature solution method. Interestingly, it shares its topological structure with the famous porous material MOF-5, which is formed from Zn4O(BDC)3 (BDC = 1,4-benzenedicarboxylate). The nodes [OZn4] and organic linkers [BDC] of MOF-5 are carefully substituted with La3+ rare-earth cations and the inorganic linkers [BO3] and [LiO4], respectively, in order to construct a pure inorganic open framework. LB-1 exhibits good thermal and water stability. Moreover, it possesses a short cut-off edge (<190 nm) and moderate birefringence (exp. 0.040@589.5 nm, cal. 0.038@589.5 nm). Further insights into the cut-off edge were given by first-principles calculations. The factors that influence the birefringence of LB-1 were discussed in view of the spatial arrangement of the [BO3] anionic groups.
研究领域:
无机化学
·
材料科学
·
晶体工程
·
光学材料
·
固体化学
✓ 已验证
DOI
高影响因子
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
·
2020
·Vol. 37
·期 2
·1900445
·
IF 3.099
Artem Yakovliev,Tymish Y. Ohulchanskyy,Roman Ziniuk,Tereza Dias,Xin Wang,Hao Xu,Guanying Chen,Junle Qu,Anderson S. L. Gomes
In this work, the application of near infrared (NIR)-emitting NaYbF 4 :1%Tm 3+ @NaLuF 4 :30%Nd 3+ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd 3+ and Yb 3+ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd 3+ and Yb 3+ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.
研究领域:
生物医学工程
·
牙体牙髓病学
·
纳米医学
·
光学成像
·
生物材料
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2018
·Vol. 47
·期 26
·8697-8705
·
IF 4.099
Yang Ding,Jie Liu,Ming Zeng,Xishu Wang,Junli Shi,Weili Wang,Yanru Miao,Xibin Yu
Rare earth (RE3+)-doped NaY(MoO4)2 nanocrystals are efficient materials for realizing multicolor emission, which plays an important role in displays, W-LEDs, solar cells and biolabeling. Up to now, research on the multicolor tuning properties of RE3+-doped NaY(MoO4)2 nanoparticles has mostly focused on traditional preparation routes such as the hydrothermal method and sol–gel process. However, the products obtained using these methods are usually large in size (on the micron/submicron scale) and agglomeration problems are inevitable. With the development of nano optoelectronic devices and bioluminescence labeling, there is an urgent need to find an efficient method to prepare nanoscale, monodispersed and NaY(MoO4)2:RE3+ nanocrystals (NCs) with good crystallinity and stronger emission properties. In this work, we demonstrate a simple, fast, reproducible and one-step synthesis of NaY(MoO4)2:Eu3+ NCs with sizes varying from 1–20 nm via a ligand-assisted reprecipitation strategy. The reaction mechanism and emission intensities of NaY(MoO4)2:Eu3+ NCs with various morphologies have been discussed in detail. Furthermore, Tb3+ and Eu3+ ion co-doped NaY(MoO4)2 NCs were also prepared, and various emission colors were obtained and tuned from red, orange-red, yellow and yellow-green to green. Energy transfer between the Tb3+ and Eu3+ ions in the NaY(MoO4)2 host matrix has also been demonstrated. Finally, a highly efficient and stable NaY(MoO4)2:0.05Tb,0.04Eu NC-based W-LED device was built, which indicates the promising future application for this material in the field of lighting. The tunable multicolour emission, ease of preparation and nanosize reveal that NaY(MoO4)2:RE3+ NCs have a potential application in full color displays and W-LEDs.
研究领域:
材料科学
·
纳米技术
·
光学材料
·
无机化学
·
光电子学
✓ 已验证
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2020
·
IF 2.65
Xiao-yu Zhang,Min Xu,Sheng-zhu Cao,Wen-bo Chen,Wen-yao Yang,Qin-yu Yang
Diamond/copper composite has been considered as one of the next generation thermal management materials. Interfacial modification is an essential means of ameliorating interface wettability and bonding of diamond/copper composite for improving its thermal conductivity . In the present work, Diamond/copper composite was manufactured by using spark plasma sintering (SPS) technology with 60% volume fraction of diamond mixed with 40% volume fraction of copper power, chromium powder (0.7 wt%) and scandium oxide powder (0.21 wt%). A series of material analysis methods were used to characterize the microstructure, interfacial layer , phase compositions and distributions of Diamond/copper composite. The total and partial electron density of states (DOS) for Diamond-Cr-Sc 2 O 3 interfacial model was investigated by means of first-principles calculations from CASTEP modules. The results showed Sc 2 O 3 made a 5–20 nm well-arranged and uniformly distributed interfacial chromium carbide layer in the interface region, which played a critical role in increasing the amount of reactive interfacial bonding and decreasing defect. The addition of Sc 2 O 3 brought the increasing number of heat transfer carriers at the interface and made the interface energy system more stable. The obtained diamond/copper composite exhibited that the wettability between diamond particles and copper was effectively improved. The thermal conductivity of diamond/copper is 872 W/(m·K) and the possible reasons for doping rare-earths Sc 2 O 3 to improve the thermal conductivity were discussed.
研究领域:
材料科学
·
复合材料工程
·
界面科学
·
热管理材料
·
粉末冶金
·
计算材料学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·Vol. 47
·期 23
·32641-32647
·
IF 4.527
Wei Liao,Yongqiang Tan,Chaowen Zhu,Zhen Teng,Peng Jia,Haibin Zhang
Multi-components and equimolar rare earth monosilicates, (Y 1/3 Dy 1/3 Er 1/3 ) 2 SiO 5 , (Y 1/3 Dy 1/3 Lu 1/3 ) 2 SiO 5 , (Y 1/4 Dy 1/4 Ho 1/4 Er 1/4 ) 2 SiO 5 and (Yb 1/4 Dy 1/4 Ho 1/4 Er 1/4 ) 2 SiO 5 , were prepared by solid-state reactions and the following hot-pressing. Dense microstructures with uniform elemental distributions were obtained for all samples. These investigated multi-components monosilicates exhibit low thermal conductivities and similar coefficients of thermal expansion with SiC. Moreover, they exhibit high corrosion resistances in 1400 °C water vapor , especially, four-components (Y 1/4 Dy 1/4 Ho 1/4 Er 1/4 ) 2 SiO 5 and (Yb 1/4 Dy 1/4 Ho 1/4 Er 1/4 ) 2 SiO 5 experienced almost invariable weights after small weight losses during the initial 0.5 h. All those results indicate that multi-components rare earth monosilicates are promising candidates of environmental barrier coatings for SiC/SiC composites.
研究领域:
材料科学
·
无机非金属材料
·
高温防护涂层
·
陶瓷基复合材料
·
表面工程
✓ 已验证
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2019
·Vol. 30
·期 9
·1920-1931
·
IF 3.25
Ting Wang,Bing–rui Li,Li–guang Wu,Yu–bing Yin,Bo–qiong Jiang,Ju–qing Lou
La 3+ - or Yb 3+ -doped TiO 2 supported on the surface of reduced graphene oxide were fabricated by adsorbed-layer nanoreactor synthesis (ANS) coupling with a solvothermal treatment to extend photocatalysis application in the advanced treatment of simulated wastewater with high salt concentration. Results showed that La 3+ or Yb 3+ could distribute in the TiO 2 lattice, only in ANS preparation with graphene oxide as the carrier, to replace Ti 4+ during the solvothermal treatment, thus introducing TiO 2 mixed-crystal and heterojunction structures in the catalysts. La 3+ or Yb 3+ caused lattice distortion structures and anionic vacancies in the TiO 2 lattice. The anionic vacancies (oxygen vacancies) might generate Ti 3+ in catalysts, thus enhancing visible-light response, due to impurity levels introduced by La 3+ or Yb 3+ . As the strong adsorption capability of the catalyst for phenol was not interfered by salt ions in the simulated wastewater, the catalysts could efficiently degrade phenol. The highest removal rate of phenol was approximately 90%.
研究领域:
环境科学
·
材料化学
·
光催化
·
水处理
·
纳米材料
·
表面化学
·
环境功能材料
✓ 已验证
DOI
高影响因子
PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES
·
2013
·Vol. 12
·期 9
·1628-1635
·
IF 2.923
Li Qiu-Ping,Yan Bing
A series of luminescent polymers are synthesized by incorporating rare earth complex units into polymer matrices. Firstly, we functionalize the selected polymer matrices with the imidazolium moieties, and then introduce the rare earth tetrakis(β-diketonate) complexes into polymer matrices through a mild anion exchange method. The resulting materials are characterized by FTIR, XRD, EDAX, SEM, thermogravimetric analysis, luminescence excitation spectra and emission spectra, luminescence lifetime measurements and diffuse reflectance UV-Vis spectra. The photoluminescence measurements indicate that all these rare earth complex functionalized polymers exhibit a characteristic luminescence emission originating from the corresponding rare earth ions. Among the hybrids, the europium tetrakis(TTA) complex functionalized polymers show remarkable luminescence quantum yields and relatively long 5 D 0 lifetimes at room temperature.
研究领域:
材料化学
·
高分子科学
·
光物理学
·
无机功能材料
·
发光材料
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 29
·10109-10114
·
IF 4
Juhe Liu,Yuwei Chen,Mengran Sun,Wenhao Liu,Xianghe Meng,Jiyong Yao
A new complex rare earth borate K7PbLu2B15O30 was prepared by the spontaneous crystallization method. K7PbLu2B15O30 is crystallized in the chiral trigonal space group R32 with cell parameters a = b = 13.0893(3) Å, c = 15.2379(6) Å, α = β = 90°, γ = 120°, and Z = 3. The basic structure of the crystal can be seen as composed of B5O10 groups and LuO6 polyhedra sharing oxygen atoms, while K+ and Pb2+ fill the space to balance the charge. The UV transmission cut-off edge of K7PbLu2B15O30 was less than 300 nm, and the powder SHG response was roughly 1.1 times that of KDP. Furthermore, a first-principles analysis was performed to see more about the relationship between the crystal structure and optical characteristics.
研究领域:
无机化学
·
材料科学
·
晶体工程
·
光学材料
·
固体化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 46
·期 10
·16524-16532
·
IF 3.83
Muhammad Yousaf,Asma Noor,Shuai Xu,Majid Niaz Akhtar,Baoyuan Wang
Yttrium iron garnet (YIG) nanoparticles (NPs) doped with rare earth (RE) metal ions (Y 2.5 Sm 0.5 Fe 5 O 12 , Y 2.5 Nd 0.5 Fe 5 O 12 ) were successfully synthesized by sol-gel auto combustion approach. The cubic crystalline structure and morphology of the prepared garnet ferrite NPs were analyzed by X-ray diffractometer (XRD) and field emission scanning electron microscopy (FESEM). The cubic crystalline garnet phase of the synthesized YIG, Sm-YIG and Nd-YIG samples was successfully achieved at 950 °C sintering temperature . The force constant and absorption bands were estimated by using Fourier transform infrared spectroscopy (FTIR). The doping effect of RE metal ions on the chemical states of YIG were examined by x-ray photoelectron microscopy (XPS). The valence band (from 12.63 eV to 13.22 eV), conduction band (from 10.89 eV to 11.34 eV) edges and optical bandgap values of RE doped YIG samples were calculated using UV–Vis spectroscopy and ultraviolet photo electron spectroscopy (UPS). The magnetic analysis of the prepared NPs was studied using vibrating sample magnetometer (VSM). The XPS analysis of RE doped YIG samples exhibit the existence of RE (Sm +3 , Nd +3 ) contents on the surface of YIG ferrite by decreasing the oxygen lattice in garnet structure. The optical bandgap (from 1.74 eV to 1.88 eV) explains the semiconducting nature of the synthesized NPs. The UPS results confirm the valence band position of YIG doped samples. The saturation magnetization and remanence of RE doped garnet ferrite samples increased from 13.45 to 18.83 emu/g and 4.06–6.53 emu/g, respectively.
研究领域:
材料科学
·
纳米科技
·
固体物理
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）