IONICS
·
2022
·Vol. 29
·期 2
·505-518
·
IF 2.961
Yang Dongping,Xiong Deping,Feng Zuyong,Wen Kunhua,Wu Kaidan,He Miao,Feng Yefeng
Sn-based materials receive a lot of attention because of their high theoretical specific capacity, acceptable price, and good electrical conductivity. However, Sn-based materials have a large volume expansion in the circulation process, leading to the rapid decay of capacity. According to the ion diffusion time formula: t = L2/2D, where L is the diffusion length or the particle size, and D is the diffusion constant of the ions and the electrons. It can be seen that reducing the particle size can significantly improve the multiplier performance of the material. At present, the main methods for preparing nano-sized metal/carbon composites are the high-energy ball grinding method, hydrothermal method, calcined metal, and organic matter precursor. In this paper, sodium alginate was used as a precursor system for the Fe-doped Sn @3D carbon composite material, which was applied to the lithium-ion battery anode to obtain excellent electrochemical performance (1133.5 mAhg −1 after 200 cycles at 0.2 Ag −1 ). The increase in the specific surface area of Fe-doped Sn @3D carbon also increases the charge transfer efficiency and further improves the multiplier performance of the electrode. Meanwhile, the nano-size and structure can better buffer the volume expansion and protect the structure of the electrode.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
JOURNAL OF THE CHINESE CHEMICAL SOCIETY
·
2017
·Vol. 64
·期 2
·231-238
·
IF 0.935
Jie Wu,Zongmei Wu,Xuejiao Sun,Shichao Yuan,Ruling Zhang,Qingliang Lu,Yueqin Yu
Sodium alginate (SA) was combined with poly( N -isopropylacrylamide) (PNIPAAm) to prepare thermosensitive hydrogels through semi-interpenetrating polymer network (semi-IPN) and fully interpenetrating polymer network (full-IPN). The thermosensitive, swelling, mechanical, and thermal properties of pure PNIPAAm, SA/PNIPAAm semi-IPN, and Ca-alginate/PNIPAAm full-IPN hydrogels were investigated. The formation of semi-IPN and full-IPN significantly improved the hydrogels’ swelling capability and mechanical properties without altering their thermosensitivity. 5-Fluorouracil (5-Fu) was selected as a model drug to study the release behaviors of the hydrogels. It was found that in vitro controlled drug release from semi-IPN hydrogels showed an initial release burst, followed by a slower and sustained release, before reaching equilibrium. Full-IPN hydrogels showed slow and sustained release during the whole process. Temperature and pH were found to affect the rate of drug release. Ca-alginate/PNIPAAm full-IPN hydrogels have potential application as drug delivery matrices in controlled drug release.
研究领域:
生物材料
·
药剂学
·
高分子科学
·
组织工程
·
药物递送系统
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2016
·Vol. 74
·期 1
·75-90
·
IF 1.371
Chen Xiuqiong,Yan Huiqiong,Shi Zaifeng,Feng Yuhong,Li Jiacheng,Lin Qiang,Wang Xianghui,Sun Wei
A novel biosensor based on electro-co-deposition of myoglobin (Mb), sodium alginate (SA), Fe 3 O 4 -graphene (Fe 3 O 4 -GR) composite on the carbon ionic liquid electrode (CILE) was fabricated using Nafion as the film forming material to improve the stability of protein immobilized on the electrode surface, and the modified electrode was abbreviated as Nafion/Mb-SA-Fe 3 O 4 -GR/CILE. FT-IR and UV–vis absorption spectra suggested that Mb could retain its native structure after being immobilized in the SA-Fe 3 O 4 -GR composite film. The electrochemical behavior of the modified electrode was studied by cyclic voltammetry, and a pair of symmetric redox peaks appeared in the cyclic voltammograms, indicating that direct electron transfer of Mb was realized on the modified electrode, which was ascribed to the good electrocatalytic capability of Fe 3 O 4 -GR composite, the good biocompatibility of SA and the synergistic effects of SA and Fe 3 O 4 -GR composite. The electrochemical parameters of the electron transfer number ( n ), the charge transfer coefficient ( α ) and the electron transfer rate constant ( k
s ) were calculated as 0.982, 0.357 and 0.234 s −1 , respectively. The modified electrode exhibited good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) with wide linear range from 1.4 to 119.4 mmol/L, low detection limit as 0.174 mmol/L (3 σ ), good stability and reproducibility.
研究领域:
生物传感器
·
电化学
·
蛋白质电化学
·
纳米材料
·
生物相容性材料
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2016
·
IF 3.42
Haibin Li,Fei Jiang,Song Ye,Yingying Wu,Kaiping Zhu,Deping Wang
The strontium-substituted hydroxyapatite microspheres (SrHA) incorporated alginate composite microspheres (SrHA/Alginate) were prepared via adding SrHA/alginate suspension dropwise into calcium chloride solution, in which the gel beads were formed by means of crosslinking reaction. The structure, morphology and in vitro bioactivity of the composite microspheres were studied by using XRD, SEM and EDS methods. The biological behaviors were characterized and analyzed through inductively coupled plasma optical emission spectroscopy (ICP-OES), CCK-8, confocal laser microscope and ALP activity evaluations. The experimental results indicated that the synthetic SrHA/Alginate showed similar morphology to the well-known alginate microspheres (Alginate) and both of them possessed a great in vitro bioactivity. Compared with the control Alginate, the SrHA/Alginate enhanced MC3T3-E1 cell proliferation and ALP activity by releasing osteoinductive and osteogenic Sr ions. Furthermore, vancomycin was used as a model drug to investigate the drug release behaviors of the SrHA/Alginate, Alginate and SrHA. The results suggested that the SrHA/Alginate had a highest drug-loading efficiency and best controlled drug release properties. Additionally, the SrHA/Alginate was demonstrated to be pH-sensitive as well. The increase of the pH value in phosphate buffer solution (PBS) accelerated the vancomycin release. Accordingly, the multifunctional SrHA/Alginate can be applied in the field of bioactive drug carriers and bone filling materials.
研究领域:
生物材料学
·
骨组织工程
·
药物递送系统
·
生物医学工程
·
再生医学
·
生物无机化学
·
药剂学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）