文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第13至14个,产品总数14个

设置提升方向
钛渣
POWDER TECHNOLOGY · 2020 · IF 4.142

Direct reduction of upgraded titania slag by magnesium for making low-oxygen containing titanium alloy hydride powder

Zhaowang Dong,Yang Xia,Xueyi Guo,Jinlong Zhao,Linfeng Jiang,Qinghua Tian,Yong Liu

Upgraded titania slag (UGS) is a titanium-rich material with over 90 wt% titanium dioxide and some minor elements such as Fe, Al, Cr, and Si, which is mainly used for preparing TiO 2 and TiCl 4 . In this study, UGS was directly reduced with magnesium powder in a hydrogen atmosphere. Titanium alloy hydride powder with the oxygen content of 0.032 wt% was obtained. The minor elements of Fe, Si, Al, and Cr from the UGS were kept in the final powder with the main phase of TiH 1.924 (δ), and minor intermetallic phases of HFe 2 Ti, Ti 5 Si 3 H 0.9 and Cr 1.8 TiH 5.3 . EDS elemental mapping results indicated that HFe 2 Ti and Ti 5 Si 3 H 0.9 intermetallics formed bright phase islands in the matrix. The reduction mechanism and the reaction sequence were discussed based on the thermodynamic modelling with the assistance of HSC chemistry software. The possibility of hydrogen reduction of titanium oxides was discussed as well.

CAS / MDL: 7786-30-3
研究领域: 材料科学 · 冶金工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Building Engineering · 2025 · IF 7.4

Uncovering the potential of titanium-bearing pickling sludge as a new supplementary cementitious material: Modification, performance and leaching safety

Yongqi Da,Xiaodong Ma,Tingshu He,Renhe Yang,Yang Li,Qianqian Yang,Jing Du

The titanium-bearing pickling (TP) sludge from titanium processing industry is the hazardous solid waste that remains to be utilized harmlessly and resourcefully. It consists of 34 % calcium, 18 % fluorine, 15 % titanium and high leaching toxic of heavy metals, but the most of TP sludge was still landfilled with huge environmental hazards, and the utilization studies are rare. Hence, the study proposed to upcycle this sludge by the light calcination modification, the effects of calcined lightly TP sludge (LTP sludge) on cement properties and leaching safety were investigated by XRD, SEM, MIP, BCR, etc. The results revealed that light calcination (600 °C/700 °C/800 °C for 2h) assisted the formation of anatase and fluorite, and induced transformation from anatase to rutile, the calcined LTP sludge presented larger particle size, smaller specific surface area and the different microstructure. The addition of TP sludge into cement even induced the water requirement reach 33.2 % couple with the prolonged setting time and weak strength, the calcined LTP sludge reversed the above inhibition effects, its addition could accelerate hydration process, dense the hydrated matrix with improved pore distribution and lower porosity, also reduce water requirement, shorten setting time and promoted the strength. The 3d and 28d compressive strength of cement prepared with 15 % calcined LTP sludge under 600 °C reached 27.7 Mpa and 52.9Mpa. Gradual formation of fluorite, rutile and anhydrite in calcined LTP sludge under 800 °C might lead to the deceleration in cement hydration couple with the reduced strength. The amounts of mobile and hazardous metal speciation in the TP sludge are higher than 40 %, but after light calcination modification, F1, F2 and F3 fractions have transformed into F4 (higher than 92 %) in hydrated cement prepared with calcined LTP sludge under 600 °C, the harmful ions hardly escaped from the hydrated matrix and even in the various pH leaching environments.

研究领域: 材料科学 · 环境工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。