JOURNAL OF MATERIALS CHEMISTRY
·
2012
·Vol. 22
·期 43
·22873-22880
·
IF 5.968
Xiwei Zhang,Xiujuan Zhang,Xiaozhen Zhang,Yuping Zhang,Liang Bian,Yiming Wu,Chao Xie,Yuanyuan Han,Yan Wang,Peng Gao,Liu Wang,Jiansheng Jie
The narrow indirect bandgap of Si hinders the full absorption and utilization of the solar light. Energy band engineering to the Si based photovoltaic devices is essential to address this problem. Here we report the fabrication of ZnSe nanoribbon (ZnSeNR)/Si nanowire (SiNW) p–n heterojunction arrays by directly growing or simply drop-casting the p-type ZnSeNRs on highly aligned n-type SiNW arrays. Phosphorus (P) was used as dopant to achieve robust p-type doping in the ZnSe nanostructures with a hole concentration as high as 6.5 × 1018 cm−3. Thanks to the matched bandgap and the light trapping arising from the one-dimensional (1D) array structure, the heterojunction arrays exhibited improved light absorption, particularly in the blue/UV wavelength range. Moreover, by taking advantage of the ohmic contact between graphene and p-ZnSeNR, heterojunction array solar cells with graphene transparent electrode were fabricated, giving rise to a power conversion efficiency of ∼0.78% under AM 1.5G illumination. It was found that the surface passivation to the SiNW array played an important role in determining the device performance; an efficiency up to 2.27% was obtained after surface modification with methyl groups. Our results demonstrate the heterojunction arrays, together with the graphene transparent electrodes, could be promising candidates for high-performance and low-cost photovoltaic applications.
研究领域:
材料科学
·
纳米科技
·
半导体物理
·
光电子学
·
能源材料
·
表面科学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2014
·Vol. 2
·期 34
·13859-13867
·
IF 0
Chengxin Peng,Huixin Chen,Qiongyu Li,Weiwei Cai,Qin Yao,Qingsheng Wu,Jinhu Yang,Yong Yang
The silicon material is the most promising candidate for developing new-generation lithium-ion batteries with high energy and power output. However, there remains a significant challenge due to poor electrical conductivity and pulverization of the silicon based anode during cycles. Aiming to solve these problems, in this work we fabricate a novel 3D composite architecture made of a Si@SiOx core–shell nanowire array grown on a 3D graphitic foam (Si CNW–3D GF) substrate by a well-designed multiple-step approach. The prepared Si CNW–3D GF composite shows the integrated advantages for high-performance lithium ion batteries, including its light weight, open macroporosity, high conductivity, high Si NW loading, excellent flexibility as well as SiOx buffer layers. As a result, the Si CNW–3D GF composite exhibits excellent performance such as high reversible lithium storage capacity (3603 mA h g−1 at a current density of 840 mA g−1), excellent cycling performance (up to 100 cycles) and superior rate capability (2299 mA h g−1 at 4200 mA g−1 and 1206 mA h g−1 at 8400 mA g−1), which is 2 times that of the Si CNW electrode where Si CNWs were grown directly on a stainless steel current collector without the presence of 3D GF.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
·
电池技术
✓ 已验证
DOI
Advanced Science
·
2024
·Vol. 11
·期 38
·2405276
·
IF 14.3
Huangzhe Dai,Chengqian Zhang,Hao Hu,Zhezai Hu,Haonan Sun,Kan Liu,Tiefeng Li,Jianzhong Fu,Peng Zhao,Huayong Yang
The rapid development of ocean exploration and underwater robot technology has put forward new requirements for underwater sensing methods, which can be used for hydrodynamic characteristics perception, underwater target tracking, and even underwater cluster communication. Here, inspired by the specialized undulated surface structure of the seal whisker and its ability to suppress vortex-induced vibration, a multidirectional hydrodynamic sensor based on biomimetic whisker array structure and magnetic 3D self-decoupling theory is introduced. The magnetic-based sensing method enables wireless connectivity between the magnetic functional structures and electronics, simplifying device design and endowing complete watertightness. The 3D self-decoupling capability enables the sensor, like a seal or other organisms, to perceive arbitrary whisker motions caused by the action of water flow without complex calibration and additional sensing units. The whisker sensor is capable of detecting a variety of hydrodynamic information, including the velocity (RMSE < 0.061 m s −1 ) and direction of the steady flow field, the frequency (error < 0.05 Hz) of the dynamic vortex wake, and the orientation (error < 7°) of the vortex wake source, demonstrating its extensive potential for underwater environmental perception and communication, especially in deep sea conditions.
研究领域:
生物医学工程
·
海洋生物学
·
传感器技术
·
流体力学
·
仿生学
·
水下机器人
·
环境感知
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Wei Zhou,Wanglong Mao,Pingyang Huang,Xiong Huang,Haoyuan Xu,Bo Wu,Xiaofang Jiang,Xiangtao Chen,Hanyu Liu,Guofu Zhou,Jinyou Xu
This study introduces a facile method for the controlled growth of addressable planar arrays of highly luminescent, catalyst-free 1,4-bis(5-phenyloxazol-2-yl)benzene (POPOP) nanowires. By employing a hollow mask over a faceted sapphire substrate, simultaneous control over the position and orientation of the nanowires is achieved through a mask-confined graphoepitaxial growth, offering substantial advantages over traditional post-growth assembly techniques. High-temperature annealing creates parallel nanogrooves on the sapphire surface, inducing a graphoepitaxial effect that aligns the nanowires with a consistent [102] crystallographic axis. The hollow mask further aids in precisely localizing nanowire growth through its shadowing effect. Optoelectronic investigations reveal that these nanowires emit intense and stable blue photoluminescence at room temperature, with a broad spectrum spanning from 400 to 600 nm. This luminescence is achieved through excitation by continuous-wave ultraviolet light or two-photon absorption using femtosecond infrared light. Notably, the emission quantum efficiency of POPOP nanowires reaches 59 %, a remarkable improvement over the 12 % observed in powder counterparts when excited with 405 nm light. Transit absorption spectra indicate that ground state bleaching and excited state absorption display consistent kinetics within a 100 ps time window, suggesting the same origin from singlet excitons. The precise alignment and positioning of these nanowires make them viable for in-situ integration into photodetectors with rapid ultraviolet light responses. This study advances the controlled growth of catalyst-free nanowire arrays and enhances the understanding of the optoelectronic properties of POPOP nanowires.
研究领域:
材料科学
·
纳米科技
·
光电子学
·
凝聚态物理
·
表面科学
·
有机半导体
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2016
·Vol. 4
·期 25
·9816-9821
·
IF 8.262
Li Cheng,Qing Chang,Yu Chang,Nannan Zhang,Changyuan Tao,Zhaona Wang,Xing Fan
Hierarchical forest-like photoelectrodes were prepared by assembling nano-ZnO on an array of micro-metal dendrites, aiming to demonstrate the idea of highly efficient photon-harvesting inside a biomimetic dendrite structure. Via a facile aqueous electrochemical deposition process, the metal dendrites were deposited on both flat and wire substrates with different alignments, showing wide adaptability. A strong, broadband anti-reflection effect was observed, owing to the diffuse reflection inside the microdendrites. By increasing the dendrite height, the overall reflectivity of the metal electrode can be reduced from 75% to 45%, which could be further reduced to 12% after combining with acicular-leaf-like ZnO nanoarrays. Its applications in light-driven water splitting were successfully demonstrated. Taking advantage of the forest-like photoelectrode, we have artificially constructed an efficient photo-electrochemical system similar to plants in a forest, with photons harvested by the crown-like photoanodes in the sunshine, and synthetic reactions driven by the root-like electrode in the shadow.
研究领域:
材料科学
·
纳米科技
·
光电化学
·
可再生能源
·
仿生学
✓ 已验证
DOI
高影响因子
THIN SOLID FILMS
·
2018
·
IF 1.939
Yanqi Lv,Yanhong Li,Hongxia Sun,Yi Guo,Yanmei Li,Jinkun Tan,Xingfu Zhou
Crystalline yttrium-doped rutile TiO 2 nanorod arrays were synthesized and successfully implemented as a photoanode of perovskite solar cells . Study shows that yttrium was successfully doped and TiO 2 band gap changes from 3.07 eV to 3.02 eV. A positive shift of 100 mV in the flat-band potential (V fb ) was observed in Y-doped rutile TiO 2 nanorods. A power conversion efficiency of 7.95% and a photocurrent density of 15.13 mA/cm 2 were obtained for the doped sample. The photocurrent density is 1.47 times higher than that of the un-doped device. Incident photon-to-current conversion efficiency shows Y-doped device has a clear increase in quantum efficiency in the visible light range from 450 and 750 nm. Open circuit voltage decay measurements demonstrate the superior ability of Y-doped TiO 2 nanorod for separating electrons and holes and decreasing the recombination events. The improved performance is possibly attributed to the enhanced electron injection and transfer efficiency caused by a positive shift in V fb and a reduction in charge recombination. This study opens a door toward the improvement of photocurrent density of perovskite solar cell via an element doping route.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光电子学
·
半导体物理
·
可再生能源
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
S.Z. Zhang,X.L. Wang,X.H. Xia,Z.J. Yao,Y.J. Xu,D.H. Wang,D. Xie,J.B. Wu,C.D. Gu,J.P. Tu
Interfacial issues have been the main obstacle to the development of solid-state batteries . In this work, we design a solid hybrid polymer electrolyte based on poly-(ethylene glycol) diacrylate and succinonitrile (PSSE) with a liquid state precursor. An intimate interface between PSSE and Li 4 Ti 5 O 12 @vertical graphene (LTO@VG) electrode with three-dimensional array structure is cleverly constructed by infiltrating fluid precursor of PSSE into vertical pores of LTO@VG followed by polymerization and solidification of PSSE. The quasi-solid-state LTO@VG//PSSE//Li and LiFePO 4 //PSSE//LTO@VG full cells exhibit superior electrochemical performance since the active materials are closely contacted by the conductive skeleton and ion-conductive electrolyte. The LTO@VG//PSSE//Li cells maintain 85.7% capacity retention after 400 cycles at 2 C and the LFP//PSSE//LTO@VG full cells still reach 99.0% capacity retention after 200 cycles at 0.5 C. This novel strategy for interface engineering paves the way for achieving high-performance solid-state batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米材料
·
界面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF CRYSTAL GROWTH
·
2018
·
IF 1.742
Xuehua Zhang,Liang Yu,Wei Zhang,Fangren Hu,Yongjin Wang
PS microspheres emulsions with different PS diameters of 207 and 378 nm were prepared by using an emulsifier-free polymerization method. A novel secondary self-assembly method which combined the spin coating and the lifting-up method was used to prepare the close-packed PS MCC films. During the process, the PS MCC film was firstly assembled on a glass substrate by a spin coating technique. Secondly, the obtained PS MCC film was transferred on the air-water interface by immersing the PS glass substrate in water using a dip-coater. Thirdly, the floating close-packed PS MCC films on the air-water interface was transferred to a new glass substrate by using a lifting-up method. During the spin-coating and the self-assembly process, some SDS solution was added in the PS films to improve the uniformity of the PS layer. Effects of the spin-coating speeds, the SDS solution concentration and the lifting-up rates on the morphology of PS MCC films have been discussed. Scanning electron microscopy was used to observe the morphological properties of the PS colloidal crystal films. Results indicate that a relatively close-packed and large scale PS MCC films can be obtained when the spinning speed is 2000 rpm for 60 s, the SDS solution concentration is 2 wt% and the lifting-up rate is 2 mm/min. Furthermore, the polydimethylsiloxane soft mold was replicated from the-fabricated PS MCC films and was then imprinted onto the photosensitive hybrid film under UV-irradiation and thus the micro-lens arrays built in the photosensitive hybrid sol–gel film were obtained.
研究领域:
材料科学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2024
·
IF 10.5
Boru Du,Jingyu Lu,Guantao Wang,Mingguang Han,Yan Gao,Sida Luo
Laser-induced graphene (LIG) is a highly promising technology for assembling thin-film electronics with miniaturized surficial patterns, although hard to guarantee both high-quality formation of raw materials and high resolution of feature size. In this study, a combined microcontact printing (μCP) and LIG protocol is creatively utilized to fabricate ultra-thin graphene films with highly ordered micro-stripe arrays. In addition to realize various patterned structures with unique scalable and stackable characteristics, PAA concentration (4–8 wt%) is systematically investigated as a critical parameter to precisely control the feature size of micro-patterns before and after the irradiation process, including line width (before: 5.37–22.44 μm, after: 4.83–22.32 μm) and average height (before: 69.81–187.39 nm, after: 5.72–48.61 nm). By further exploring a defocused multi-lasing strategy, sheet resistance of the graphene array could be optimized dramatically from 634.1 kΩ/sq to 1.9 kΩ/sq, while maintaining low ablation (45.38 % porosity) and high carbon content (84.2 wt%). Lastly, the process is demonstrated to assemble different graphene based electronic devices with miniaturized sizes, including liquid sensors with sensitivity of 2.7 % μL −1 and electrothermal heaters with temperature-ramping rate as high as 24.7 °C/s and working temperature as high as 248 °C.
研究领域:
材料科学
·
纳米科技
·
电子工程
·
生物医学工程
·
表面科学
·
柔性电子学
✓ 已验证
DOI
高影响因子
Nano Select
·
2021
·Vol. 2
·期 6
·1225-1232
·
IF 0
Ziqi Zhang,Yan Zhang,Yingqi Liu,Siqi Zhang,Kaida Yao,Yueqiu Sun,Yang Liu,Xiangzhi Wang,Weimin Huang,Jun Lu
Cerium has been used as an implanted alloy additive for many years for it can enhance the mechanical properties of the alloy and restrain the corrosion of the implant. Moreover, cerium oxide nanoparticles are often used as an antibacterial material. However, there were few researches focusing on the antibacterial properties of Ce 3+ and Ce 4+ ions, instead of their corresponding oxide, as potential antibacterial coatings. Thus in this work, we loaded Ce ions into the porous structure of the ZIF-8 nanoparticles and co-deposited them with hydroxyapatite as a composite coating onto anodized titanium dioxide nanotubes array in order to test whether it can improve the anti-corrosion and antibacterial properties of the materials without affecting the biocompatibility.
研究领域:
生物材料学
·
纳米医学
·
表面工程
·
骨科植入物
·
抗菌材料
·
生物医学工程
✓ 已验证
DOI
危险品化学品经营许可证（带存储）