ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Shaopei Jia,Yanhui Wang,Pengfei Tian,Shuyu Zhou,Haixia Cai,Hongwei Gao,Jianbing Zang
Nitrogen-doped mesoporous carbon (NMC) was synthesized via pyrolysis of cobalt-containing casein obtained by extraction from pure milk with the auxiliary of cobalt ions. The cobalt element in casein promoted specific surface area and N element doping amount of casein-derived porous carbon. The N-doped porous carbon obtained by carbonization at 800 °C (NPC-800) possessed a specific surface area of ∼886.7 m 2 g −1 , and the mesoporous size was centered at 2.7 and 7 nm. X-ray photoelectron spectroscopy analysis showed that the nitrogen content of NPC-800 was 3.29 at%. The NPC-800 was explored as a symmetric supercapacitor, which exhibited specific capacity of 380 F g −1 at a current density of 0.5 A g −1 , 218 F g −1 at a current density of 20 A g −1 , and high capacitance retention of 91.3% after charging/discharging 5,000 cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
碳材料
✓ 已验证
DOI
高影响因子
Solar RRL
·
2023
·Vol. 8
·期 4
·2300926
·
IF 7.9
Qiuju Liu,Yang Liu,Hu Liu,Qingyong Tian,Bin Fan,Hua Bai
Room-temperature-processed (RTP) electron-transport layer (ETL) is a prerequisite for fabricating fully RTP perovskite solar cells (PSCs). Herein, an RTP-Zn 2 SnO 4 (ZSO) ETL is deposited for achieving RTP-PSCs by magnetron sputtering using ZnO and SnO 2 targets. The ZSO ETL exhibits great electrical properties, better band alignment, and yields increased grain size of the perovskite grown on it, thus facilitating electron extraction from the perovskite layer to the ETL. As a result, a champion power conversion efficiency of 21.06% is achieved in the ZSO-based device, which is the highest value for RTP-PSCs. The ZSO-based PSCs also exhibit high device stability. Moreover, the efficiency of a large-area perovskite module based on ZSO ETL reaches 17.79%.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 67
·62675-62679
·
IF 3.289
Yongzheng Wang,Jing Ye,Yu Shen,Mingjiang Xie,Shuangshuang Yang,Chao Liu,Xiangke Guo,Luming Peng,Weiping Ding,Xuefeng Guo
Anatase-type titania with ultrathin nanosheet morphology and sintering-resistant structure was constructed from monolayer titanate nanosheets isolated by uniform silica nanoparticles. The obtained anatase titania nanosheets possess high accessible surface area, ultrathin thickness (∼0.6 nm), dominant (116) facets exposed, wide bandgap and exhibits excellent photocatalytic activity.
研究领域:
材料科学
·
纳米科技
·
光催化
·
无机化学
·
能源材料
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2019
·
IF 2.291
Yuanbo Xie,Fangyuan Zhong,Hongxu Chen,Danni Chen,Jiawen Wang,Junkuo Gao,Juming Yao
In this paper, novel hydrogen-bonded metal-complex frameworks MPM-1-TIFSIX and HOF-21 were selected as adsorbents to adsorb iodine. MPM-1-TIFSIX and HOF-21 were prepared by layering method and mixed stirring method, respectively. The structures of the two HOFs were characterized in detail by XRD , BET, TGA and FT-IR. The adsorption behavior and adsorption capacity of MPM-1-TIFSIX and HOF-21 for iodine were investigated in detail. The experimental data showed that the equilibrium adsorption amounts of MPM-1-TIFSIX and HOF-21 were 205.51 mg/g and 172.86 mg/g, respectively. The adsorption process of MPM-1-TIFSIX was conformed to be pseudo-second-order kinetic, while the adsorption process of HOF-21 was conformed to be pseudo-first-order kinetic. The results indicated that HOFs could be used as iodine capture and storage materials.
研究领域:
材料化学
·
环境化学
·
配位化学
·
多孔材料
·
吸附科学
✓ 已验证
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2016
·
IF 4.917
Hao Li,Samah Awadh Ali Mahyoub,Wenjie Liao,Shuqian Xia,Hechuan Zhao,Mengya Guo,Peisheng Ma
The magnetic biochars were easily fabricated by thermal pyrolysis of Fe(NO 3 ) 3 and distillation residue derived from rice straw pyrolysis oil at 400, 600 and 800 °C. The effects of pyrolysis temperature on characteristics of magnetic biochars as well as adsorption capacity for aromatic contaminants (i.e., anisole, phenol and guaiacol) were investigated carefully. The degree of carbonization of magnetic biochars become higher as pyrolysis temperature increasing. The magnetic biochar reached the largest surface area and pore volume at the pyrolysis temperature of 600 °C due to pores blocking in biochar during pyrolysis at 800 °C. Based on batch adsorption experiments, the used adsorbent could be magnetically separated and the adsorption capacity of anisole on magnetic biochars was stronger than that of phenol and guaiacol. The properties of magnetic biochar, including surface area, pore volume, aromaticity, grapheme-like-structure and iron oxide (γ-Fe 2 O 3 ) particles, showed pronounced effects on the adsorption performance of aromatic contaminants.
研究领域:
环境科学
·
环境工程
·
材料科学
·
物理化学
·
污染控制化学
·
能源材料
·
吸附科学
✓ 已验证
DOI
高影响因子
Solar RRL
·
2021
·Vol. 6
·期 3
·2100554
·
IF 8.582
Daiyu Li,Pei Jiang,Wenhao Zhang,Jiankang Du,Chen Qiu,Jiale Liu,Yue Hu,Yaoguang Rong,Anyi Mei,Hongwei Han
Perovskite solar cells (PSCs) have achieved a certified power conversion efficiency (PCE) of 25.5% and show potential for low-cost photovoltaic applications. One key of pushing PSCs into industrialization is enlarging their areas. However, the PCE of larger-area PSCs is dramatically limited by the undesired increase in series resistance ( R S ), which leads to obvious loss of fill factor (FF). Herein, R S in fully printable mesoscopic PSCs is modulated with a carbon electrode by optimizing the device geometry, preparing busbars to collect currents from electrodes and improving the conductivity of the back electrode. A rectangular device shape and tin busbars on conductive substrate effectively reduce the R S . Meanwhile, an additional hot-pressed highly conductive low-temperature carbon layer on the back carbon electrode also reduces the R S . An enhanced PCE of 13.99% for 1 cm 2 PSCs by R S modulation is obtained, whereas the control device exhibits a PCE of 7.74%. The PCE increase is due to the improvement of FF from 0.372 to 0.638 with reduced R S from 27.13 to 9.66 Ω cm 2 .
研究领域:
材料科学
·
能源材料
·
光伏技术
·
纳米结构材料
·
电化学
·
器件物理
✓ 已验证
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2023
·
IF 4.1
Chong Chen,Jiacan Shao,Shaojie Qu,Li Xie,Wenjian Jiang,Keying Zhang,Xin Zhuo,Hongwei Shi,Hongyan Wang,Li Sun,Li Zhang,Guang Zhu
Hollow carbon nanosheets with predominant mesopores have been demonstrated as a promising electrode material for supercapacitor , but their low specific surface area with relatively low micropore proportion limits their specific capacitance and energy density . Herein, we develop a novel extrusion plant microtube strategy to synthesize micron-sized nitrogen-doped hollow porous carbon nanosheets (MNHPCS) from dandelion fluff having the specific natural thin-wall and hollow tubular bundled structure through high-pressure extrusion, carbonization and KOH activation. The optimized MNHPCS displays strutted bilayer nanosheet structure, large SSA of 1593 m 2 g −1 , high micoporosity of 71.2 % and high heteroatom content (5.2 at.% for N, 7.0 at.% for O). Importantly, MNHPCS prepared by the new technique overcomes the drawbacks of hollow carbon nanosheets and presents an excellent capacitance of 378 F g −1 at 0.5 A g −1 and rate capability of 57 % at 80 A g −1 in 6 M KOH. Furthermore, the energy density of MNHPCS//MNHPCS based supercapacitor in EMIMBF 4 can reach up to 84 Wh kg −1 . Most importantly, MNHPCS can be easily achieved from various plant wastes having hollow tubular structure, which would provide a clearly method on selecting plant precursors for producing hollow porous carbon nanosheets applied on supercapacitors.
研究领域:
材料科学
·
纳米技术
·
电化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 62
·57009-57012
·
IF 3.289
Di Wu,Jing Ye,Lie Chen,Yongzheng Wang,Kai Fang,Mingjiang Xie,Luming Peng,Xuefeng Guo,Weiping Ding
Crystalline mesoporous γ-Fe2O3 with a high surface area was prepared by a novel solvent-free route. This material exhibits a high reversible capacity with superior cycle performance and an exceptional high-rate capability as an anode material for Li-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
固体化学
·
电池技术
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 46
·102880-102893
·
IF 5.8
Li Yunhe,Li Hao,Zhao Baogang,Ma Yanming,Liang Peiyuan,Sun Tianjun
The escalating levels of surface ozone concentration pose detrimental effects on public health and the environment. Catalytic decomposition presents an optimal solution for surface ozone removal. Nevertheless, catalyst still encounters challenges such as poisoning and deactivation in the high humidity environment. The influence of support on catalytic ozone decomposition was examined at a gas hourly space velocity of 300 L·g −1 ·h −1 and 85% relative humidity under ambient temperature using Cu-Mn–doped oxide catalysts synthesized via a straightforward coprecipitation method. Notably, the Cu-Mn/SiO 2 catalyst exhibited remarkable performance on ozone decomposition, achieving 98% ozone conversion and stability for 10 h. Further characterization analysis indicated that the catalyst’s enhanced water resistance and activity could be attributed to factors such as an increased number of active sites, a large surface area, abundant active oxygen species, and a lower Mn oxidation state. The catalytic environment created by mixed oxides can offer a clearer understanding of their synergistic effects on catalytic ozone decomposition, providing significant insights into the development of water-resistant catalysts with superior performance. Graphical
研究领域:
环境催化
·
大气污染控制
·
材料化学
·
表面科学
·
催化化学
·
环境工程
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2015
·
IF 6.217
Jian Zhi,Houlei Cui,Angran Chen,Yian Xie,Fuqiang Huang
Dye-sensitized solar cells (DSSCs) on flexible plastic substrates usually suffer from a slower electron diffusion rate and insufficient surface area due to no sintering process . Therefore, the conversion efficiency (ƞ) of such flexible DSSCs is normally below 6%. Here, the highly flexible DSSCs with enhanced performance are fabricated at room temperature, employing 3D graphene decorated nanocrystalline TiO 2 films (3DGT) as anode on plastic substrates. Owing to the enhanced charge transportation and increased surface area from 3D conductive graphene skeleton, the 13 μm-thick 3DGT-0.85 (0.85 wt% 3D graphene plus TiO 2 nanoparticles) anode achieves a power conversion efficiency of 6.41%, which is 56% higher than pristine TiO 2 based anode. This efficiency is among the highest values for the previously reported TiO 2 photoanodes on plastic substrates.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光电转换
·
柔性电子学
✓ 已验证
DOI
高影响因子
Solar RRL
·
2019
·Vol. 3
·期 5
·1800346
·
IF 0
Jiang Cheng,Rong Hu,Kun Wang,Xiang Meng,Ying Li,Xin Yang,Xiaoqing Liao,Lu Li,Kok Boon Chong
Antimony chalcogenide is a promising absorber material for photovoltaic (PV) cells because of its tunable band gap, strong optical absorption, earth-abundant, and nontoxic constituents. Here, a novel hydrazine-free approach for fabricating antimony chalcogenide films prepared via spray pyrolysis deposition with further selenylation, as well as high performance solar cells are reported. The fabricated antimony chalcogenide solar cells exhibits remarkably high open-circuit voltage ( V OC ) comparing with that of Sb 2 Se 3 and Sb 2 S 3 devices. The distribution of Se during the selenylation process via refering to the Fick's second law is discussed. The results show that the selenized absorber has tremendously improved absorbance for visible light and a cascade-type energy level from surface to bulk, resulting in an ideal energy level matching for p-n junction. By introducing an efficient buffer layer, the detrimental short-circuit is avoided by reducing the cracks. Finally, 4.57% of the power conversion efficiency (PCE) of the solar cell is achieved. Furthermore, a module with a large-scale active area of 21 cm 2 is successfully fabricated, which shows a PCE of 3.19%, and a V OC of 3.42 V. The present work suggests that the antimony chalcogenide solar cells are promising for industrial application.
研究领域:
材料科学
·
光伏技术
·
半导体器件
·
能源材料
·
薄膜制备
·
表面工程
·
器件物理
✓ 已验证
DOI
RUSSIAN JOURNAL OF GENERAL CHEMISTRY
·
2021
·Vol. 91
·期 4
·726-731
·
IF 0.868
Xu Y.,Hu Y.,Bao Q.,Zhang J.,Liu B.,Zhang Z.,Zhang Q.,Zhang H.
Copper phyllosilicate has been synthesized from a solution of sodium silicate and copper nitrate by co-precipitation under acidic conditions followed by reduction under H 2 flow for using it as the Cu/SiO 2 catalyst. The catalyst has been characterized by XRD, XPS, FTIR and Raman spectra, EDS, BET, and TEM. It is confirmed that only copper phyllosilicate and SiO 2 exist in the catalyst precursor, and there has been no CuO. Physical and chemical properties of Cu/SiO 2 catalyst have been evaluated. The Cu/SiO 2 catalyst has not only a large specific surface area and abundant mesopores but also the advantages of high dispersion of copper nanoparticles and the combination of Cu 0 and Cu + . The catalyst demonstrates high activity and selectivity in the reaction of 2-butanol dehydrogenation to methyl ethyl ketone.
研究领域:
催化化学
·
材料科学
·
物理化学
·
纳米材料
·
有机合成
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）