FIBERS AND POLYMERS
·
2021
·Vol. 22
·期 2
·345-353
·
IF 2.153
Liu Jun,Sun Meng,Chang Meng-Jie,Fan Si-Meng,Hui Qian,Ni Fu-Rong,Yuan Bin
Novel CoFe 2 O 4 /MIL-100(Fe) (CFO/MIL-100(Fe)) core/shell nanofibers were prepared by successive ionic layer adsorption and reaction (SILAR) assembly of MIL-100(Fe) on electrospun CoFe 2 O 4 nanofibers. The MIL-100(Fe) shells were constructed on the dispersed CoFe 2 O 4 fiber surface with high uniformity, homogeneous thickness and high stability. Due to the inherent porosity of MIL-100(Fe), a higher specific surface area of 225.77 m 2 /g is achieved for the CFO/MIL-100(Fe)-10 sample. The formed CFO/MIL-100(Fe) catalysts exhibit high catalytic activity towards degradation of rhodamine B (RhB) under visible light irradiation. The photocatalytic activity remains above 77 % within 60 min illumination after four cycles. Due to the simple synthetic method, highly uniform structure, strong magnetic recoverable, as well as good photocatalytic performance, the obtained CFO/MIL-100(Fe) core/shell nanofibers could be promising photocatalysts for practical application.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Jing Wu,Rong Zhao,Hui Xiang,Chenfan Yang,Wenda Zhong,Chengzhi Zhang,Qin Zhang,Xuanke Li,Nianjun Yang
Tin disulfide (SnS 2 ), one transition metal dichalcogenide (TMD) is a cost-effective and promising electrocatalyst for hydrogen evolution reactions (HER) in the alkaline electrolytes. Its electrocatalytic HER performance is unfortunately limited, originating from its un-conspicuous inherent catalytic activities and non-favorable adsorption sites for hydrogen. Herein, a tin disulfide/stannic oxide (SnS 2 /SnO 2 ) heterostructure is designed and grown on the nickel foam (denoted as SnS 2 /SnO 2 -NF). The SnS 2 /SnO 2 heterostructure introduces more active (100) facets or a high density of active sites, accelerates the diffusion kinetic of electrons and ions, lowers the water dissociation energies, and optimizes adsorption energies of hydrogen atoms. On this catalyst, superior HER performance is realized in an alkaline medium. An overpotential of 108 mV at a current density of −10 mA cm –2 with a Tafel slope of 50.1 mV dec –1 and long-term durability are achieved for HER in 1 M KOH. This work paves a new way to design high-performance HER electrocatalyst through facet engineering of the designed heterostructures.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Yanshu Luo,Bingqiong Tan,Xianghui Liang,Shuangfeng Wang,Xuenong Gao,Zhengguo Zhang,Yutang Fang
MIL-100(Fe) has been proven to have good hydrothermal stability and high vapor uptake and is considered as a promising dehumidification material. However, reduction of the production cost and assembly of the adsorbent and glass fiber paper substrate into the MIL-100(Fe) monolith are challenging. This work presented a dry gel conversion strategy for the rapid synthesis of the MIL-100(Fe) monolith at low temperatures. The porosity and crystalline phase of the products obtained under different crystallization temperatures and times were carefully studied. XRD and SEM characterization indicated that the MIL-100(Fe) crystal could be conveniently synthesized on the substrate at a low temperature of 50–70 °C and in a short time of 2–6 h. The spherical particles assembled from crystals dispersed evenly and tightly on the glass fiber paper. The synthesized MIL-100(Fe) monolith had a thickness of about 270 μm and a MIL-100(Fe) loading of 77.7%. Dynamic and static water vapor adsorption tests revealed that the monolithic adsorbent obtained at 50 °C for 6 h had the largest vapor saturation adsorption capacity (0.581 g/g) and the fastest adsorption rate. Moreover, the monolith owned a low regeneration temperature (below 80 °C) and a satisfactory cycle stability. Convenient equipment, mild synthetic conditions, low renewable energy consumption, and good performance will promote its application in the rotary dehumidification system.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Shanshan Chen,Kang Wen,Xiaoting Zhang,Ruize Zhang,Runping Han
Metal organic frameworks are attracting scientific interest in adsorption applications owing to their large surface area and controllable pore size or shape over both microporous and mesoporous domains. Based on this, an iron(III) trimesic acid MIL-100(Fe) was facilely synthesized by hydrothermal treatment and used as adsorbent to remove neutral red (NR) from aqueous solution. MIL-100(Fe) was characterized using X-ray diffraction, scanning electron microscopy and transform infrared spectroscopy. MIL-100(Fe) was studied in view of the adsorption isotherms, thermodynamics, kinetics, and regeneration of the adsorbent. The adsorption kinetics data of NR were found to be in agreement with pseudo-second-order model. Temkin model was observed to be more suitable than Freundlich and Langmuir models in describing the adsorption isotherm. The maximum adsorption quantity was 333 mg g –1 at 313 K from Langmuir model. Thermodynamic parameters indicated that the NR adsorption process was endothermic and spontaneous. The NR-loaded MIL-100(Fe) adsorbent was regenerated and reused using pH = 2, 75% ethanol. A single-stage batch design for NR adsorption onto MIL-100(Fe) was also presented based on Temkin isotherm model equation. Based on the findings, MIL-100(Fe) is a promising adsorbent for the removal of cationic dyes from solution and thus can be used in practical application.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Water Reuse
·
2024
·Vol. 14
·期 1
·39-50
·
IF 4.3
Huang Yiru,Li Youyou,Zhong Qingwei,Luo Chen
View large Download slide View large Download slide Close modal Metal-organic framework (MOF) materials, characterized by their porosity and large specific surface areas, exhibit excellent adsorption properties. With the aim of removing Te(IV) from environmental aquatic systems, this study is the first to propose the use of MIL-100(Fe). The material reveals a strong adsorption capacity for Te(IV), with maximum adsorption of 531.9 mg/g, superior to other adsorbent materials. Adsorption isotherm and kinetic models indicate that the adsorption process primarily involves monolayer chemical adsorption. According to the thermodynamic parameters, the adsorption reaction is endothermic. The experiment individually examined factors affecting the material's adsorption performance, including adsorbent dose, initial concentration of Te(IV), pH, adsorption time, and coexisting ions. Even under high ion strength conditions and high concentrations of coexisting ions, the material's adsorption efficiency for Te(IV) still reached over 94%. The material has been successfully applied to remove Te(IV) from lake water, river water, and seawater, yielding satisfactory results. Due to the high salinity and ionic strength of the solution, the removal efficiency of Te(IV) in the seawater matrix was slightly lower than that in freshwater (river and lake water). Thus, this material shows promise for the removal of Te(IV) from complex aquatic systems. MIL-100(Fe) was prepared and characterized. The Te(IV) can be adsorbed by MIL-100(Fe) effectively, and the adsorption process was primarily a monolayer chemical adsorption and an endothermic reaction. The Te(IV) can be removed effectively in environmental water supplies by MIL-100(Fe).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 3
·1-10
·
IF 5.3
Han Hongyu,Huang Yiqun,Miao Junjian,Lai Keqiang
Surface-enhanced Raman spectroscopy (SERS) was combined with stoichiometric analysis to synthesize a AuNPs@MIL-100 (Fe) SERS substrate. This high-performance, and low-cost metal–organic framework-based SERS nano sensor is capable of detecting malachite green (MG) residues in fish. The minimum detectable concentration of MG in standard solutions is 0.1 μg/L, while in fish samples, the detection range spanned from 0.003–0.088 μg/kg. The partial least squares regression (PLSR) and support vector machine regression (SVR) were applied to model the SERS data, enhancing both the precision and reliability of the detection. The results show that compared with the traditional linear regression and PLSR models, the prediction accuracy of the SVR model is an improvement with higher stability. MG standard solutions and three fish samples can be analysed directly or after simple extraction. This method can be used to detect trace harmful substances in different aquatic products. Graphical
研究领域:
食品安全
·
分析化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Pengfei Zhu,Mengrong Geng,Shuang Qin,Heyang Cao,Zhenhong He,Xinhua Gao,Chuanyi Wang
The conversion of CO 2 into chemical products or fuels of great value always remains an outstanding challenge. Here, we report a heterojunction Fe@C/Ni 2 P composite catalyst obtained by preparing MIL-100(Fe) derived Fe@C confined Ni 2 P nanoparticles, which is applied to photothermal catalytic CO 2 hydrogenation with H 2 O. Without adding any sacrificial agents or co-catalysts, the optimal Fe@C/Ni 2 P sample shows higher yields for CO 2 -to-C 2 H 6 and CO 2 -to-CO yield of 5.83 μmol g −1 h −1 and 179.9 μmol g −1 h −1 than that of pristine Fe@C and Ni 2 P, respectively. The experimental results indicated that the obtained Fe@C/Ni 2 P can act as catalytic sites to adsorb, activate, and convert CO 2 under low-intensity LED light irradiation (420 nm) with a temperature of 200 ℃. The physical structure, photochemical properties and energy band structure of the Fe@C/Ni 2 P composite catalysts were investigated by XRD, XPS, FT-IR, TEM, BET, respectively. Furthermore, the reaction pathway of Fe@C/Ni 2 P photothermal catalytic CO 2 hydrogenation with H 2 O to C2 products and CO were systematically analyzed by in situ infrared spectroscopy (DRIFTS).
研究领域:
化学
·
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2012
·Vol. 22
·期 15
·7449-7455
·
IF 5.968
Shu-Hui Huo,Xiu-Ping Yan
The adsorption of malachite green from aqueous solution on a highly porous metal–organic framework MIL-100(Fe) was studied in view of the adsorption isotherm, thermodynamics, kinetics, and regeneration of the sorbent. The adsorption isotherms of malachite green on MIL-100(Fe) followed the Freundlich model, and MIL-100(Fe) possessed heterogeneous surface caused by the presence of different functional groups on the surface. The adsorption of malachite green on MIL-100(Fe) is controlled by an entropy effect rather than an enthalpy change, and obeyed a pseudo-second-order kinetics. Analysis of the intraparticle diffusion plots revealed that more than one process affected the adsorption, and film (boundary layer) diffusion controlled the adsorption rate at the beginning. Evidence from zeta potential and X-ray photoelectron spectroscopic data showed that the adsorption of malachite green was also driven by electrostatic attraction and the interaction between the Lewis base –N(CH3)2 in malachite green and the water molecule coordinated metal sites of MIL-100(Fe). MIL-100(Fe) gave much higher adsorption capacity for malachite green than other conventional adsorbents such as activated carbon and natural zeolite. The high adsorption capacity, good solvent stability, and excellent reusability make MIL-100(Fe) attractive for the removal of MG from aqueous solution.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Composites Science
·
2025
·Vol. 9
·期 5
·250
·
IF 3.7
Waheed Rehman,Faiq Saeed,Samia Arain,Muhammad Usman,Bushra Maryam,Xianhua Liu
NiFe2O4and TiO2are widely studied for photoelectrochemical (PEC) applications due to their unique properties. Nitrogen-doped graphene (NG) and metal–organic frameworks (MOFs), such as MIL-100(Fe) (where MIL stands for Materials of Lavoisier Institute), are commonly incorporated to enhance PEC performance by offering a high surface area and facilitating efficient charge transport. Composite systems are commonly employed to overcome the limitations of individual PEC catalysts. In this study, a highly efficient NiFe2O4/NG@MIL-100(Fe)/TiO2photoanode was developed to enhance photoelectrochemical water-splitting performance. The composite was synthesized via a hydrothermal method with a two-step heating process. X-ray diffraction confirmed the expected crystal structures, with peak broadening in NiFe2O4indicating reduced crystallite size and increased lattice strain. X-ray photoelectron spectroscopy of the Ni 2p and Fe 2p regions validated the successful integration of NiFe2O4into the composite. Electrochemical analysis demonstrated excellent performance, with linear sweep voltammetry achieving a peak photocurrent density of 3.5 mA cm−2at 1.23 V (vs RHE). Electrochemical impedance spectroscopy revealed a reduced charge-transfer resistance of 50 Ω, indicating improved charge transport. Optical and electronic properties were evaluated using UV-Vis spectroscopy and Tauc plots, revealing a direct bandgap of 2.1 eV. The composite exhibited stable photocurrent under amperometric J-t testing for 2000 s, demonstrating its durability. These findings underscore the potential of NiFe2O4/NG@MIL-100(Fe)/TiO2as a promising material for renewable energy applications, particularly in photoelectrochemical water splitting.
研究领域:
材料科学
·
能源科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2024
·
IF 3.8
Chengzhuo Yu,Jin Xu,Yarui Wang,Silong Wang,Li Xiong,Fanglan Geng,Zesen Shang,Huasheng Wu,Jitao Lv,Lixia Zhao,Yawei Wang
Graphical Untill now, reactive oxygen species (ROS) are difficult to generate in the natural light conditions, since most photocatalysts require external strong stimuli. We surprisingly found the ROS generation on MIL-100(Fe)/TiO 2 driven by mild natural light. The ROS generation patterns and mechanism of MIL-100(Fe)/TiO 2 was revealed by chemiluminescence (CL) and density functional theory (DFT). Reactive oxygen species (ROS), as one kind of the most highly oxidizing oxidants, are difficult to generate and utilize in the natural light conditions, since many materials require external strong stimuli for ROS release to be effective as pollutant degradation or biocide. In this work, we surprisingly found the ROS generation on MIL-100(Fe)/TiO 2 driven by mild natural light. Then ROS generation patterns and mechanism was revealed by chemiluminescence (CL) and density functional theory (DFT). Meanwhile, rhodamine B (RhB) can also be removed by MIL-100(Fe)/TiO 2 under natural light, which further evidence the ROS generation under the natural light. This work provides a new direction for spontaneously generating ROS releasing without external strong stimuli and has the broad potential applications in the field of pollutant degradation or antimicrobials under natural conditions.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
PROCESS BIOCHEMISTRY
·
2021
·
IF 3.757
Kun Xiao,Rennv Wang,Congyang Liu,Meini Wang,Wei Dong,Tao Pan
PAH biodegradation aided by surfactants and cyclodextrins has been widely studied because the former's micelles and the latter's hydrophobic cavities can increase the apparent solubility of PAHs. In this work, the effects of Triton X-100 (TX-100) and β-cyclodextrin (β-CD) on the bioavailability and biodegradation of phenanthrene (PHE) were investigated. The degrading microorganism used was Moraxella osloensis CFP312, a new strain screened from polluted soil and could form biofilms on crystalline PHE. At the same concentrations, β-CD solubilized less PHE than TX-100 but promoted PHE biodegradation. The two solubilizers had almost no different effects on CFP312 hydrophobicity; however, β-CD significantly eluted fewer cells from biofilms on crystalline PHE than TX-100. Microscopy observation revealed that the residual structure of the biofilm treated with β-CD was more complete than that of the biofilm treated with TX-100. This effect is beneficial to the function of biofilms and conducive to mass transfer from the exposed area in the crystalline PHE to the aqueous phase. Although TX-100 and β-CD could enhance the mass transfer of PHE to the aqueous phase, the latter significantly improved the bioavailability and biodegradation of PHE mainly because its solubilization was accompanied by easy desorption and retention of the biofilm functional integrity.
研究领域:
环境科学
·
微生物学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2024
·Vol. 12
·期 26
·16043-16051
·
IF 10.7
Keying Su,Shan Yang,Yulu Zhu,Yujia Liang,Yawen Tang,Xiaoyu Qiu
High-entropy alloy (HEA) nanoparticles have been recognized as one kind of efficient electro-catalyst for water splitting. However, their higher catalytic activity is restrained by the difficulty in precisely shaping the HEAs into ordered facets and fully exposed surface structures. Herein, we report a seed-mediated conformal growth and partial etching method for the controlled synthesis of PtIrRuRhPd HEA cubic nanocages (CNCs), which feature the ordered {100} facets and ultrathin shells of five atomic layers. The slow injection of a PtIrRuRh layer on Pd nanocubes and the subsequent capture of dissociative Pd atoms in the etching step are responsible for the formation of nearly equimolar PtIrRuRhPd HEAs. Due to the synergistic effects derived from the multicomponent high-entropy effects, the ordered (100) facets, and the ultrathin feature, the PtIrRuRhPd HEA CNCs exhibit significantly high electro-catalytic activities for hydrogen and oxygen evolution reactions in an acidic medium, with overpotentials of 20 mV and 272 mV at 10 mA cm−2 (η10), respectively. As electrodes for a water electrolyzer, the PtIrRuRhPd HEA CNCs afford an η10 as low as 196 mV, together with superior long-term durability for 200 000 s.
研究领域:
材料科学
·
电催化
·
能源化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）