JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2023
·
IF 5.7
Liangliang Tang,Dongxu Yao,Yongfeng Xia,Hanqin Liang,Yu-Ping Zeng
Gas-pressure sintered silicon nitride (Si 3 N 4 ) ceramic was brazed to oxygen-free copper (OFC) foil using 20.22 ± 0.93 mg/cm 2 of Ag-Cu-TiH 2 filler at 875 ◦ C for 0.5 h. The effect of TiH 2 content on the 3D morphology, including the cross-section microstructure and etched surface morphology of Si 3 N 4 ceramic/OFC foil joints, was analyzed. An evolution model of the interfacial microstructure for joints was proposed based on 3D morphological analysis. The reaction between the brazing alloy and Si 3 N 4 ceramic formed the interfacial reaction layer and the inside reaction zones during brazing. The growth mechanism of the interfacial reaction layer was discussed in detail. The peeling test was used to evaluate the bonding strength of the Si 3 N 4 ceramic/OFC foil joints, and the optimum peeling strength of 25.1 N/mm was achieved at 5 wt% TiH 2 content. The interfacial microstructure of the joints changed with TiH 2 content, leading to different main fracture mechanisms and corresponding peeling strengths.
研究领域:
材料科学
·
焊接工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Xue-Qi Zhang,Rong-Fang Shen,Xiao-Jing Guo,Xi Yan,Yan Chen,Jiang-Tao Hu,Wan-zhong Lang
Herein, a convenient and environment-friendly grafting and reduction strategy was used to anchor bimetallic Ag-Cu nanoparticles on polypropylene (PP) fabrics. The as-prepared samples were characterized by various techniques including FE-SEM, XRD, EDX, XPS and FT-IR. The as-prepared sample exhibits excellent activity on the catalytic reduction of highly concentrated 4-NP, and the synergistic effect between Ag and Cu nanoparticles was proved. The entire catalytic reduction was generally considered to obey pseudo-order kinetics, affording high conversion even after 15 successive recycles. These results showed that the PP based composite with Ag-Cu nanoparticles effectively provided superb catalytic efficiency and stability in 4-nitrophenol reduction, and the PP based composites were suitable in practical applications for the treatment of diverse waste water.
研究领域:
材料科学
·
环境工程
·
纳米技术
·
催化
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Yuan Li,Shaoqian Jia,Ling-Xin Kong,Xiaotian Guo,Xinyi Lin,Dae Joon Kang,Huan Pang,Feng Yu
Accurate detection of nitrite plays a vital role in public health because excessive intake poses serious health risks. Metal-organic frameworks (MOFs) and their derivatives have emerged as a promising platforms for nitrite detection due to their adjustable structures and functionalization capabilities. In this study, we synthesized Ag/Cu-BTC by doping silver ions during Cu-BTC synthesis, followed by high-temperature carbonization to produce carbon-supported Ag-Cu bimetallic nanoparticles (Ag/Cu@C) for effective nitrite sensing. The carbon framework from MOF precursors not only enhances electrical conductivity and stability but also prevents nanoparticle aggregation. Silver addition enhances electron transfer efficiency and alters the electronic structure through synergistic interactions with copper, resulting in increased catalytic activity. The optimized Ag/Cu@C composite shows excellent sensing performance with a detection limit of 50 nM, high sensitivity (855.32 μA mM −1 cm −2 ), and a wide linear response range (0.2–10,000 μM). The sensor maintains 98.5–103.2 % recovery against 10-fold concentrations of common interferents (Cl - , NO 3 - , SO 4 2- , glucose), and retains 92.3 % initial current after 28 days, demonstrating exceptional selectivity and operational stability. These features highlight its significant potential for practical applications in environmental monitoring and food safety testing.
研究领域:
电化学传感
·
纳米材料
·
金属有机框架（MOFs）
·
环境监测
·
食品安全
✓ 已验证
产品关联
DOI
高影响因子
IEEE Photonics Journal
·
2024
·Vol. 16
·期 4
·1-9
·
IF 2.1
Wenying Zhou,Xue Han,Yanjun Wu,Guochao Shi,Shiqi Xu,Mingli Wang,Wenzhi Yuan,Jiahao Cui,Zelong Li
An effective SERS-based detection method assisted by machine learning algorithm has been developed to intelligently identify the pharmacodynamic substances in traditional Chinese medicine (TCM) which aided in the quality control and identification of TCM. In this work, the ultrasensitive grating-like core-shell Ag@SiO2@Cu@moth wing (Ag@SiO2@Cu@MW) SERS platform was explored which can precisely control the intergap distances by adjusting the thickness of the SiO2 layer. This SERS platform demonstrated reproducibility and reliability, with a low relative standard deviation (RSD) of 7.38% and an enhancement factor (EF) of 2.49 × 107. The optimized Ag30@SiO2(4)@Cu20@MW substrate were then applied in the accurately analyzing pharmacodynamic substances. Specifically, the label-free SERS analysis showed the distinct spectral features for Jujuboside A, Saikosaponin A and Timosaponin A-III. Machine learning algorithms, such as principal component analysis (PCA), decision tree (DT), support vector machine (SVM), k-nearest neighbors (kNN) were employed and further in differentiating with the three pharmacodynamic substances Raman spectrum groups. These results indicate that SERS technology in combination with machine learning algorithms can not only achieve rapid and accurate detection of different types of pharmacodynamic substances, but also promote the modernization and international application of TCM.
研究领域:
分析化学
·
中医药学
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Jinxin Wei,Zhe Hu,Wenjie Zhou,Yi Qiu,Hanqing Dai,Yuanyuan Chen,Zhongjie Cui,Siyu Liu,Haiyang He,Wanlu Zhang,Fengxian Xie,Ruiqian Guo
With the blooming development of zero-dimensional nanomaterials , I-III-VI alloying quantum dots (QDs) with outstanding photoelectrical properties have emerged to attract much attention as promising environmentally-friendly substitutions for conventional binary Cd-based QDs. In this work, a facile one-pot method was introduced to synthesize unreported quaternary Ag-Cu-Ga-Se/ZnSe (ACGSe/ZnSe) QDs. A relatively high photoluminescence quantum yield (PL QY) of 71.9% and a tunable emission from 510 to 620 nm were successfully achieved. We explored the roles of alloying compositions in ACGSe/ZnSe QDs, inferring that increased Ag proportion would not only lower the V defect level which leads to the blue shift of emission, but also slow the ZnSe shelling process owing to the larger lattice distortion. At last, the white light-emitting diodes (WLEDs) were fabricated with ACGSe/ZnSe QDs as the conversion layer, indicating that the as-prepared QDs are a promising candidate for further applications.
研究领域:
材料科学
·
纳米技术
·
光电技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Nanoscience Au
·
2024
·
IF 4.8
Dan Luo,Zhiheng Xie,Shuangqun Chen,Tianyi Yang,Yalin Guo,Ying Liu,Zhouhao Zhu,Liyong Gan,Lingmei Liu,Jianfeng Huang
Electrochemical semihydrogenation (ESH) of alkynes to alkenes is an appealing technique for producing pharmaceutical precursors and polymer monomers, while also preventing catalyst poisoning by alkyne impurities. Cu is recognized as a cost-effective and highly selective catalyst for ESH, whereas its activity is somewhat limited. Here, from a mechanistic standpoint, we hypothesize that electron-deficient Cu can enhance ESH activity by promoting the rate-determining step of alkene desorption. We test this hypothesis by utilizing Cu–Ag hybrids as electrocatalysts, developed through a welding process of Ag nanoparticles with Cu nanowires. Our findings reveal that these rationally engineered Cu–Ag hybrids exhibit a notable enhancement (2–4 times greater) in alkyne conversion rates compared to isolated Ag NPs or Cu NWs, while maintaining over 99% selectivity for alkene products. Through a combination of operando and computational studies, we verify that the electron-depleted Cu sites, resulting from electron transfer between Ag nanoparticles and Cu nanowires, effectively weaken the adsorption of alkenes, thereby substantially boosting ESH activity. This work not only provides mechanistic insights into ESH but also stimulates compelling strategies involving hybridizing distinct metals to optimize ESH activity.
研究领域:
化学工程
·
电催化
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2025
·
IF 3.2
Yao Shuaikang,Zhao Jingkun,Shao Guolin,Gao Siyu,Zhai Shangru,Xiao Zuoyi,Zhang Feng
The development of a catalyst with high catalytic activity and selectivity remains a crucial challenge in the field of heterogeneous catalysis. In this work, we demonstrated a versatile procedure for the immobilization of ultrafine and monodispersed metal nanoparticles onto glutaraldehyde-crosslinked polyethyleneimine-modified calcium alginate (GLA-PEI/Ca-SA) beads. The resulting hydrogel beads underwent comprehensive characterization through scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The results revealed that well-dispersed Ag, Cu, and Ni nanoparticles, with a mean size of 3.5, 2.6, and 4.1 nm, respectively, were successfully loaded onto the surface of GLA-PEI/Ca-SA beads with porous fiber network structure. Notably, the Ag/GLA-PEI/Ca-SA exhibited outstanding catalytic activity and stability, achieving over 95% conversion within 7 successive cycles towards the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by NaBH 4 in aqueous solution. Particularly, the Cu/GLA-PEI/Ca-SA beads displayed the highest catalytic activity for the reduction of 4-NP with a kinetic reaction rate constant of 1.56 × 10 −2 s −1 . We expect that this work will provide a novel and effective strategy to design highly efficient catalysts across various catalytic reactions. Graphical Ultrafine and monodispersed Ag nanoparticles within 5 nm on GLA-PEI/Ca-SA beads with high catalytic activity for rapid 4-NP reduction.
研究领域:
材料科学
·
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 10
·期 9
·7783-7793
·
IF 1.5
Fen Wang,Xian Jing Yang,Qi Guo Chen,Mei Chao,Chun An
Pd/Ag/Cu electrode was successfully prepared on Ag dendrites with Cu substrate (Ag/Cu) by galvanic replacement reactions, and was characterized by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The electroreductive dechlorination reaction of 2,3-dichlorophenol on Pd/Ag/Cu electrode was investigated by cyclic voltammetry and in situ FTIR techniques. Compared with Pd/Cu, Ag/Cu and Cu electrodes, Pd/Ag/Cu electrode exhibited the highest electrocatalytic activity for electroreductive reaction of 2,3-dichlorophenol. C-Cl bond was broken by reaction of adsorbed 2,3-dichlorophenolate with (H) ads Pd on Pd/Ag/Cu electrode surface. The main intermediate was 2-chlorophenolate, and the final product was phenolate.
研究领域:
环境化学
·
电催化
·
材料科学
·
分析化学
✓ 已验证
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2019
·
IF 4.384
Wenying Guo,Sihai Zhang,Nengwu Zhu,Deliang Luo,Pingxiao Wu
In this study, a strategy was developed to directly recover high-purity Ag and other metals (especially Cu) from WECs to reduce the leaching of precious metals and promote the leaching of Cu and other metals. The results of SEM, EDS, XRD and ICP-OES clearly suggested that Ag and Cu were effectively released from WECs below 0.15 mm size, which contributed to the regulation of metals crystal types. The zero-valent copper from WECs was changed by roasting to form CuO and Cu 2 O, and the suitable samples of roasting at 400 °C for 3 h were confirmed experimentally. After the leaching processing under H 2 SO 4 (1 M) and H 2 O 2 (30%), the roasted particles were directly obtained, including Ag with 99.53 wt.% purity and more than 99.99% recovered, and Cu, Sn, Ni and Zn extracted by 99.67%, 90.71%, 73.05% and 99.32%, respectively. However, the unroasted particles would generate lower grade of Ag because other metals (e.g. Cu, Sn, Ni and Zn) were difficult to be leached from WECs. The leaching solution primarily included Cu ions (98.3%) and a little of the nickel (0.83%) and tin (0.86%) ions, which could recover copper by evaporation crystallization to form CuSO 4 (99.48 wt. %). The reaction mechanism of the process could be concluded that the copper state was transformed by mechanical separation and roasting to promote the leaching of various metals from Ag.
研究领域:
材料科学
·
环境工程
✓ 已验证
DOI
高影响因子
Journal of CO2 Utilization
·
2021
·
IF 7.132
Danqing Shu,Miao Wang,Fengyu Tian,Honglei Zhang,Chuang Peng
Electroreduction of CO 2 to high value-added products such as hydrocarbons provides a promising way to create a carbon neutral circular economy. Copper (Cu) is the most effective metal catalyst with selectivity towards hydrocarbons but Cu catalyst alone generally produces hydrocarbons at low selectivity and yield. Operando surface enhanced infrared absorption spectroscopic (SEIRAS) analysis reveals that the low hydrocarbon yield is attributed to the poor ability of Cu to produce carbon monoxide (CO), which is a crucial intermediate for hydrocarbon formation. In the current study, an Ag-Cu dual-cathode CO 2 RR device is developed, which allows separate control of electrode potential. This dual-cathode cell shows increased hydrocarbon yield (83 % for methane and 106 % for ethylene) and a 200 mV lower onset potential for C 2 H 4 , compared to electrolysis with a single Cu cathode. The CO produced by the Ag cathode transfers to Cu and increase its CO coverage, facilitating methane formation as well as promoting C C coupling to form ethylene. This study also reveals a mismatch of optimum electrode potential between Ag and Cu, which results in compromised performance of the two components in an Ag-Cu bimetallic electrocatalyst, but poses no challenge in the dual-cathode cell. To optimize the performance of the dual-cathode cell, we propose the use of a single-pass dual-gas-diffusion-cathode reactor with enhanced mass transfer for maximum hydrocarbon production. This work verifies that splitting the complex CO 2 RR process into two separate steps is a feasible method to improve the overall efficiency and rate of advanced products while reducing the energy input.
研究领域:
能源化学
·
电催化
·
材料科学
✓ 已验证
DOI
高影响因子
NANO
·
2018
·
IF 1.1
Jianchao Wang,Hongsheng Luo,Xuliang Song,Xihong Zu,Jie Zhang,Yuxin Gu,Guobin Yi
In this paper, a superhydrophobic Ag–Cu composite metal film was fabricated as surface-enhanced Raman scattering substrate. Ag–Cu composite metal film was prepared from galvanic displacement on commercial copper foil. The prepared silver films were modified by PFDT to create a stable superhydrophobic SERS platform. Superhydrophobic substrates were characterized by a variety of characterization methods, including scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Vis, XPS and Raman spectra. The superhydrophobic substrate could enrich probing molecules with the volatilization of solvent. Mathematical model was presented and applied to investigate concentration factor of hydrophobic substrate. The measurements were in good agreement with the calculation results. The superhydrophobic Ag–Cu composite metal film can reduce the detection limits and provide a new way to prepare efficient SERS substrates for ultra-low concentration detection.
研究领域:
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Zhizhou Cai,Ning Cao,Fanxing Zhang,Xiangzhou Lv,Ke Wang,Yi He,Yao Shi,Hao Bin Wu,Pengfei Xie
Electrocatalytic CO 2 reduction into ethanol driven by renewable energy represents a promising strategy for energy storage and mitigation of global warming, but it has remained challenging to gain high activity and selectivity of ethanol. Here we take advantage of atomic arrangement in immiscible Ag-Cu composite during annealing and establish hierarchical interfaces in the obtained core-shell catalyst. The atomic Ag-Cu interactions increase electrochemical surface area and expedite charge dynamics, resulting in an unprecedented electrocatalytic performance with the faradaic efficiency of C 2+ products, ethanol as 80.2 %, 52.6 % and the current density of ∼320 mA cm −2 at −1.0 V (versus reversible hydrogen electrode). Moreover, the Ag-Cu catalyst exhibits a notable stability for ∼60 h. Mechanism studies reveal that local CO intermediates preferentially accumulate on the core, then migrate to the continuous Cu surface for C-C coupling energy-favorably toward ethanol. Our work highlights a novel design principle as interface engineering for advanced tandem electrocatalysts.
研究领域:
材料科学
·
电化学
·
能源存储与转换
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）