ACS Omega
·
2025
·
IF 4.3
Xiaoyan Wang,Xiao Wang,Wanke Chen,Jing Yuan,Qianfeng Zhang
In this study, straw biochar (TB) was prepared by pyrolysis at 500 °C, and biochar composite material (TBS) was prepared by a 1:4 mass ratio with sludge (TS). Scanning electron microscopy and Fourier transform infrared spectroscopy were utilized to characterize the material before and after adsorption. The results demonstrated that TBS possesses significant pore structure characteristics and abundant active functional groups such as hydroxyl, carboxyl, and carbonyl groups, providing a structural basis for its efficient adsorption of heavy metal ions in aqueous solutions. The adsorption performance of the remediation materials for Cu(II) and Pb(II) in aqueous solution was systematically investigated. Experimental data showed that TBS achieved maximum adsorption capacities of 60.86 and 46.98 mg/g for Cu(II) and Pb(II) at equilibrium, respectively, exhibiting superior adsorption efficiency. Through fitting analysis using adsorption kinetic models and isothermal adsorption models, it was found that the pseudo-second-order kinetic model and Freundlich isothermal model could more accurately describe the adsorption process of the two heavy metal ions, indicating that chemical adsorption was the dominant mechanism and characterized by multilayer adsorption. Thermodynamic parameter calculations revealed negative ΔG values and positive ΔH and ΔS values, suggesting that the adsorption process was a spontaneous, entropy-increasing, and endothermic reaction. These research results fully validate the excellent removal capabilities of TBS for Cu(II) and Pb(II). This study has shown that TBS can be considered a promising and cost-effective adsorbent, demonstrating its potential to adsorb heavy metal ions in water.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2018
·
IF 3.927
Yimeng Song,Donghui Yang,Shengnan Yu,Xinsheng Teng,Ze Chang,Fusheng Pan,Xianhe Bu,Zhongyi Jiang,Baoyi Wang,Sheng Wang,Xingzhong Cao
Tailoring the interface between the polymer matrix and filler to probe the structure-performance relationship is one of the critical research issues in hybrid membranes. In this study, metal organic framework (MOF) incorporated hybrid membranes are fabricated with polydimethylsiloxane (PDMS) as the matrix and Cu(II) loaded UiO-67-bpydc (bpydc refers to 2,2′-bipyridine-5,5′-dicarboxylic acid) as the filler, which are utilized for removing thiophene from model gasoline. The structure-performance relationship of the resultant membranes was investigated. The flux of the hybrid membrane shows a remarkable increase while avoiding obvious loss of selectivity. The loading of Cu(II) onto UiO-67-bpydc effectively tailors the interface between the polymer matrix and filler, which enhances the membrane separation performance. This study may offer a new example for designing MOF-based hybrid membranes towards efficient molecular separation.
研究领域:
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2024
·Vol. 32
·期 7
·3326-3341
·
IF 4.7
Wang Rui,Song Xin,Liu Li,Zhou Chao,Wu Guangfeng
Magnetic particles with active groups on their surfaces can be applied to wastewater purification to remove harmful ions, but the insufficient number of active groups on their surfaces tends to limit their removal rate of ions. Herein, we grafted different generations of dendritic macromolecular polyamidoamine (PAMAM) onto the magnetic chitosan microspheres (MCS) using ethylenediamine tetraacetic acid (EDTA) as core (MCEPs) for the removal of Cu (II). Firstly, 7 μm-sized MCS with good dispersibility was prepared by adjusting conditions such as glacial acetic acid content, emulsifier content and raw material ratio. Secondly, the effect of MCEPs generation, pH and contact time on the adsorption capacity were investigated. The adsorption experiments showed that the MCEPs had a high adsorption capacity, when the adsorbent was the second generation of MCEP (MCEP G2.0), the maximum adsorption capacity can up to 702.9 mg/g and the adsorption process can be completed in 60 min. Moreover, among various isotherms models, MCEP G2.0 was well-fitted by Langmuir adsorption isotherm. Also, adsorption kinetic studies proved that the adsorption mechanism of MCEP G2.0 adsorbent followed the pseudo-second-order kinetic model, demonstrating that the process was chemisorption. The adsorbent has renewability as well, after five adsorption cycles, its adsorption efficiency was still higher than 80%. Therefore, the adsorbent showed a superior adsorption capacity and renewability to remove Cu (II). Graphical
研究领域:
环境科学
·
材料科学
·
化学工程
·
纳米技术
✓ 已验证
DOI
高影响因子
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY
·
2021
·
IF 2.262
Lili Yan,Siyu Jiang,Pinhua Rao,Guanghui Li,Zongdi Hao,Lei He,Shanliang Liu,Guofeng Shang
Rice hull biochar modified by ZnS nanocrystals (RBZ) was developed as an efficient absorbent for the removal of Cu(II) in aqueous solution. Response surface methodology (RSM) was applied for modeling and optimizing the performance of RBZ. The maximum adsorption capacity of RBZ toward Cu(II) through the Langmuir model fitting was 248.98 mg g−1, which was four times larger than that of rice hull biochar (RB). The adsorption kinetics of Cu(II) and XPS analysis revealed that the chemisorption process played the leading role when using RBZ. Through competition ions study, Pb(II), Cd(II), or Ca(II) can slightly reduce the adsorption of Cu(II). According to the Box Behnken design method, the analysis of variance results showed that the pH and adsorbent dosage had significant effects on the predicted responses of adsorption capacity and removal efficiency. When using the optimum conditions, pH 6, temperature 27 °C, and dosage 0.20 mg mL−1 for removing Cu(II) in solution, the maximum adsorption capacity and relatively higher removal efficiency could be obtained through the 3D response surface plots. The results demonstrated that RSM is feasible to achieve optimal conditions for adsorption capacity and removal efficiency simultaneously toward heavy metals from aqueous medium, and the interaction between them when using the biochar/ZnS composite.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2017
·
IF 3.387
Fan Wang,Lijuan Zhang,Yeying Wang,Xijian Liu,Sohrab Rohani,Jie Lu
The graphene oxide (GO) functionalized by Fe 3 O 4 @SiO 2 @CS-TETA nanoparticles, Fe 3 O 4 @SiO 2 @CS-TETA-GO, was firstly fabricated in a mild way as a novel adsorbent for the removal of Cu(II) ions and methylene blue (MB) from aqueous solutions. The magnetic composites showed a good dispersity in water and can be conveniently collected for reuse through magnetic separation due to its excellent magnetism. When the Fe 3 O 4 @SiO 2 @CS- TETA-GO was used as an absorbent for the absorption of MB and Cu(II), the adsorption kinetics and isotherms data well fitted the pseudo-second-order model and the Langmuir model, respectively. Under the optimized pH and initial concentration, the maximum adsorption capacity was about 529.1 mg g −1 for MB in 20 min and 324.7 mg g −1 for Cu(II) in 16 min, respectively, exhibiting a better adsorption performance than other GO-based adsorbents reported recently. More importantly, the synthesized adsorbent could be effectively regenerated and repeatedly utilized without significant capacity loss after six times cycles. All the results demonstrated that Fe 3 O 4 @SiO 2 @CS-TETA-GO could be used as an excellent adsorbent for the adsorption of Cu(II) and MB in many fields.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Royal Society Open Science
·
2020
·Vol. 7
·期 3
·
IF 2.646
Yazhen Wang,Shuang Li,Liqun Ma,Shaobo Dong,Li Liu
Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH2OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g–1 and 94.72 mg g−1, and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2021
·Vol. 26
·期 4
·978
·
IF 4.412
Peng Liu,Hui Ruan,Tiantian Li,Jiaqi Chen,Fuqiu Ma,Duoqiang Pan,Wangsuo Wu
The low cost β-zeolite and ethylenediamine modified β-zeolite (EDA@β-zeolite) were prepared by self-assembly method and used for Cu(II) removal from contaminated aqueous solution. Removal ability of β-zeolite toward Cu(II) was greatly improved after ethylenediamine (EDA) modification, the removal performance was greatly affected by environmental conditions. XPS results illustrated that the amide group played important role in the removal process by forming complexes with Cu(II). The EDA@β-zeolite showed desirable recycling ability. The finding herein suggested that the proposed composite is a promising and suitable candidate for the removal of Cu(II) from contaminated natural wastewater and aquifer.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Bifang Zheng,Yi He,Shuangqin Tian,Shujie Wang,Lihong Tang
The combination of bamboo fiber (BF) with chitosan (CS) in aerogels to capture heavy metals from contaminated water has not yet been previously reported. In this study, we used a straightforward sol–gel followed by freeze-drying method to fabricate a biomass composite aerogel using waste BF and CS (BF/CSA). This material is low-cost, eco-friendly, and recyclable. In particular, the BF/CSA-2 exhibited excellent mechanical strength and strong acid resistance. It effectively adsorbed Cr(VI) at pH=2 and Cu(II) at pH=5, achieving removal efficiencies of 94% and 85%, respectively. The corresponding maximum adsorption capacities were 162.10 and 138.97 mg/g. BF/CSA-2 exhibited a high removal efficiency (>70 %) after five consecutive reuse cycles. The chemisorption mechanism was confirmed through adsorption isotherms and kinetic analysis. In addition, density functional theory (DFT) calculations revealed adsorption energies of −196.473 and −121.964 kcal/mol for Cr(VI) and Cu(II), respectively, on BF/CSA-2. Based on experimental characterization and theoretical calculations, the removal mechanism involves complexation, electrostatic attraction, and reduction. This study presents a promising advancement toward the development of scalable and sustainable biomass-based aerogels for water purification.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2020
·
IF 5.977
Xianfeng Wang,Chengxiang Chu,Jiayi Lv,Yuanyuan Jia,Libo Lin,Mei Yang,Suyi Zhang,Danqun Huo,Changjun Hou
High-performance analysis of heavy metal ions is great importance in both environment and food safety. In this work, a facile and reliable colorimetric sensor was presented for simultaneous detection of Cu 2+ and Cr 3+ based on indicator-displacement assay (IDA). As a typical silicate nanomaterials , ZnSiO 3 hollow nanosphere (ZSHS) exhibited an outstanding ion exchange capacity. Zincon was incorporated with the ZSHS to form a zincon/ZSHS hybrid ionophore with a blue color. Upon the addition of Cr 3+ , IDA reaction and selective ion exchange occurred with the color change of zincon/ZSHS ionophore from blue to yellow. With such a design, colorimetric measurement of Cr 3+ was realized. The linear concentration for Cr 3+ detection ranged from 0.5 μM to 75 μM with the LOD of 83.2 nM. Furthermore, we also screened different kinds of complexing agents that may respond with zincon/ZSHS ionophore and various metal ions. It was found that tartaric acid (TA) showed the chelation capability of Zn 2+ -TA is stronger than that of Zn 2+ -zincon. Thus zincon/ZSHS/TA presented a yellow color due to the chelation reaction of Zn 2+ -TA, releasing the zincon as a free state. After addition of Cu 2+ , a stronger chelation reaction of Cu 2+ -zincon occurred. This process involved in the color change from yellow to blue and realized colorimetric measurement of Cu 2+ . The detection limit of Cu 2+ was calculated to be 43.7 nM with linear range from 0.1 to 20 μM. In addition, the zincon/ZSHS nanoprobe was successfully applied for simultaneous measurement of Cu 2+ and Cr 3+ in sorghum and river water, indicating that the zincon/ZSHS nanoprobe provided a promising sensing platform in environment and food safety.
研究领域:
环境科学
·
食品安全
·
分析化学
✓ 已验证
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Xiaoqi Liu,Yanyun Zhang,Yan Liu,Ting'an Zhang
Chitosan bead grafted by third-generation dendrimers (CB-G3) with a diameter of 1.40 mm was synthesized to investigate their performance in recovering Ag(I), Cu(II), and Pb(II) ions in aqueous media. The prepared adsorbents were characterized by XRD, FT-IR, elemental analysis, TGA , and SEM, and the effects of pH, contact time, concentration, and temperature were examined. The results showed that the adsorbents were successfully fabricated. The optimum pH value was 5, and the increased generation number contributed to adsorption capacity improvement, indicating that electrostatic interactions between amine groups and metal ions are the governing mechanism of adsorption by the CB-G3. The kinetics, isotherms, and thermodynamics of Ag(I), Cu(II), and Pb(II) adsorption onto the CB-G3 were investigated. The adsorption processes can be described using pseudo-second-order kinetic and Langmuir models. The maximum monolayer adsorption capacities were 105.62, 88.82, and 97.87 mg·g −1 for Ag(I), Cu(II), and Pb(II) at 30 °C within 210 min, respectively. Electrostatic interactions and hydrogen bonds are the main mechanisms between metal ions and N atoms. Therefore, the CB-G3 is a promising candidate for Ag(I), Cu(II), and Pb(II) adsorption owing to its splendid ability in easy separation, good adsorptivity, and reusability for efficiently adsorbing Ag(I), Cu(II), and Pb(II) ions.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Jinrui Li,Zhongxin Zhuang,Zheng Guo,Zhonggang Liu,Xingjiu Huang
Exploiting advanced bimetallic oxide as sensing materials for electroanalysis offers new opportunity to improve the electrochemical performance, but still presents a tough challenge. Herein, we synthesized the uniform Fe 2 O 3 /Mn 3 O 4 nanocubes from a framework structure in a facile approach, which were developed as the electrochemical catalyst for individual and simultaneous analysis of Cu(II) and Hg(II) in 0.1 M HAc-NaAc buffer solution (pH5.0). It showed the excellent electrochemical behavior for the simultaneous analysis Cu(II) and Hg(II) with high sensitivities of 69.29 and 190.55 μA μM cm −2 . The corresponding limit of detection values (LODs) were calculated to be 3.94 nM and 1.39 nM, respectively. The excellent electrochemical behavior of Fe 2 O 3 /Mn 3 O 4 could be attributed to the large specific surface area, which could provide a large number of adsorption sites for Cu(II) and Hg(II). Meanwhile, the bimetallic Fe and Mn atoms arranged in the porous nanocubes could offer a synergistic effect and improve the electrochemical activity. Moreover, it could be successfully applied for the simultaneous analysis of Cu(II) and Hg(II) in real water samples with the favorable recovery rate. The results confirmed that the Fe 2 O 3 /Mn 3 O 4 nanocubes could serve as a reliable platform for the simultaneous analysis of Cu(II) and Hg(II).
研究领域:
分析化学
·
材料科学
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2021
·Vol. 45
·期 40
·19032-19042
·
IF 3.591
Chengmin Hou,Hanxiao Ma,Congjun Cao,Xiaojian Ding,Jingting Duan
The composite particles (St/Fe3O4) of starch and Fe3O4 were prepared by a co-precipitation method. Then AA and HEMA were grafted and cross-linked on St/Fe3O4 by a one-step method to obtain St/Fe3O4-g-p(AA-r-HEMA). The effects of the adsorbent dosage, pH value, initial Cu(II) concentration, time and temperature on adsorption were studied. Experiments showed that St/Fe3O4-g-p(AA-r-HEMA) showed a good adsorption performance for Cu(II), with a unit adsorption capacity of 75.5 mg g−1 and a maximum removal rate of 95.0%. The adsorption process followed the Langmuir model and the pseudo-second-order kinetic model, was dominated by chemical adsorption, and belonged to single-layer adsorption. Renewable performance studies showed that after 8 adsorption cycles, 91.2% of the first adsorption effect was still retained.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）