JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2022
·
IF 3.318
Yunhui Cheng,Shihua Luo,Fuqi Huang,Xiangyi Yang,Maolong Chen,Ye Jiao,Li Wen,Zhou Xu
Soy sauce residue (SSR) is a valuable biological resource, which contains soy isoflavones (SIs) with antioxidant activity and can be used to scavenge radicals. Herein, MIL-100(Fe) was synthesized for the extraction of SIs from SSR. Under the optimal adsorption conditions, the adsorption capacity of MIL-100(Fe) for SIs was 51.81 mg/g, which could achieve a purity of 56.17% and a recovery of 93.8%. These results demonstrated MIL-100(Fe) possessed effective properties of adsorption and purification for SIs. The content of SIs in the purified product was 167 times than that of SSR. The purified total SIs had a good antioxidant activity. The established method had a good scavenging ability toward 2, 2-diphenyl-1-picrylhydrazyl, superoxide and hydroxyl radicals, with IC 50 values of 0.177, 0.116 and 0.082 mg/mL, respectively. Besides, the ferrous ion chelating potency was better than others, with IC 50 values of 0.63 ± 0.0044 mg/mL. The established method was suitable for large-scale separation of purified total SIs and provided a reference for purification of bioactive factors from complex substrates.
研究领域:
食品科学
·
生物化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESALINATION
·
2025
·
IF 9.8
Huiqun Ju,Xue Jiang,Chengyu Huangfu,Jiafei Lyu,Xianghai Guo
Metal-organic framework (MOF) materials exhibit excellent boron adsorption and isotope separation abilities, but their mechanisms are still unclear and require additional research. In this study, MIL-100(Fe), which has excellent comprehensive performance in boron adsorption and isotope separation among MOF materials, was selected to systematically investigate its boron adsorption and isotope separation performance. Based on this material, five MIL-100 (Fe 3+ , X 2+ ) bimetallic materials were prepared by doping different divalent metal ions, and the changes in the adsorption and separation capacities before and after doping were compared. The influence of different metal doping on adsorption was investigated. It was found that doping metal ions effectively increased the coordination of unsaturated metal sites in the materials, which improved the adsorption process and caused positive and effective isotopic separation. The isotopic separation factor of doping the alkali earth metal ion Ca 2+ was increased significantly from 1.033 to 1.092.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Weifeng Li,Tao Zhang,Li Lv,Yanxiao Chen,Wenxiang Tang,Shengwei Tang
A novel strategy of room-temperature synthesis of MIL-100(Fe) with organic amine as deprotonating agent was proposed. The as-prepared solid product was denoted as R-MIL-100(Fe). The material was systematically characterized via XRD , FT-IR, XPS and SEM. The effects of operation parameters such as initial fluoride concentration, reaction time, initial pH and co-existing anions on the fluoride adsorption performance of the synthesized R-MIL-100(Fe) were studied. The maximum fluoride adsorption capacity of R-MIL-100(Fe) was as high as 23.53 mg/g at 298 K in the fluoride solution. The results indicate that the adsorption process of fluorine on R-MIL-100(Fe) belongs to surface adsorption and intraparticle diffusion . An excellent fluoride adsorption performance of R-MIL-100(Fe) was observed in a wide pH range of 4–10. The co-existing anions including Cl - , NO 3 - and SO 4 2- almost had no negative effects on the adsorption performance of R-MIL-100(Fe). However, the present of CO 3 2- or HCO 3 - brought an obvious reduction of F - adsorption capacity of R-MIL-100(Fe). Thermodynamic study results illustrate that the adsorption process was an exothermic chemisorption . Chemical combination of iron and fluorine was confirmed by FT-IR and XPS. The strong combination brings the excellent F - adsorption performance of MIL-100(Fe). R-MIL-100(Fe) was successfully regenerated and recycled five cycles with an excellent regeneration ability and recyclability.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Wenjuan He,Zuopeng Li,Shengchen Lv,Mingxin Niu,Wenfeng Zhou,Jing Li,Runhua Lu,Haixiang Gao,Canping Pan,Sanbing Zhang
The Fe 3 O 4 @MIL-100(Fe) hybrid composites are successfully synthesized via an in-situ growth method and characterized using various techniques. The ability of the magnetic metal–organic framework to promote photo-Fenton like processes is investigated using levofloxacin as a representative substrate. The results show that the composite with a Fe 3 O 4 :MIL-100(Fe) mass ratio of 1:4 has a higher degradation efficiency (up to 93.4%) than Fe 3 O 4 , MIL-100(Fe), and the other fabricated composites. This higher catalytic activity is ascribed to the synergistic effect between Fe 3 O 4 and MIL-100(Fe), by which the quick separation of hole-electron pair from MIL-100(Fe) and the efficient reduction of Fe 3+ to Fe 2+ in the photo-Fenton reaction are mutually promoted. Moreover, the composite shows favorable recyclability without apparent loss of apparent photo-Fenton activity even after five cycles, and more importantly, can be recovered magnetically. The possible degradation mechanism and intermediates of levofloxacin in the photo-Fenton reaction have been tentatively proposed based on free radical quenching, electron paramagnetic resonance and mass spectrometry analysis. Finally, the developed Fe 3 O 4 @MIL-100(Fe) is successfully applied for the removal of levofloxacin from spiked wastewater with removal efficiencies ranging from 77.9 to 85.5%, which indicates that the proposed system has significant potential for wastewater treatment applications.
研究领域:
环境科学
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Bolun Yu,Jun Chen,Quanzhang Liu,Shuoyang Li,Xiaohang Zhang,Bowen Liang,Zuhong Lin,Haipu Li,Jingjing Yao
The use of metal–organic framework-derived materials for removing micropollutants from water is increasing, but precise composition control remains a challenge. In this study, 14 MIL-100(Fe)-derived materials were synthesized to adsorb and remove antipyrine (ANT) from water by optimizing the heating rate, pyrolysis temperature, and activation methods. The adsorbents demonstrated excellent ANT removal performance across a pH range of 3 to 11, as well as in complex water bodies. They also exhibited easy recovery and outstanding regeneration capabilities. Under the optimized conditions (i.e., ANT content: 10 mg/L, M-600–2 dosage: 0.1 g/L, and pH: 7), M-600-10 displayed the highest adsorption capacity (23.10 mg/g for ANT) while MIL-100(Fe) had limited adsorption capability (2.56 mg/g for ANT). The adsorption process was exothermic and spontaneous, influenced by both membrane diffusion and intraparticle diffusion, and followed the Freundlich and pseudo-second-order models. Despite variations in surface areas (75.70–261.91 m2/g), total pore volumes (0.2019–0.5984 cm3/g), and average pore sizes (7.47–13.99 nm), there was no strong linear relationship with adsorption capacity (7.47–15.99 mg/g). The major components, including Fe/pyrrolic N-doped graphene (PING), Fe3C/PING, Fe3O4/PING, and PING, had calculated adsorption energies of −0.94, −2.16, −0.79, and −2.24 eV, respectively, which correlated positively with Bader charge transfer numbers. The adsorbents relied on van der Waals forces for ANT adsorption, with PING exhibiting the strongest interactions and Fe3O4/PING exhibiting the weakest. These findings enhance the theoretical understanding of derived materials and expand their application in water purification.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Yongpan Shan,Yajie Ma,Changcai Wu,Xiangliang Ren,Xianpeng Song,Dan Wang,Hongyan Hu,Xiaoyan Ma,Yan Ma
Control release of pesticides based on target plant characteristics is highly desirable for improving the effective utilization rate and reducing non-target organism risks. Here, the controlled release formulations (Cu-CS@IN@MIL-100 (Fe)) were successfully prepared by employing MIL-100 (Fe) as the carrier material, indoxacarb (IN) as the model pesticide, and chitosan (CS) as a coating to chelate copper ions by chemical crosslinking. The prepared Cu-CS@IN@MIL-100 (Fe) had an acceptable loading content (36.25 %). The introduction of CS and copper ions endowed it with sustained release properties under weak acidity conditions like cotton leaves. The laboratory bioassay experiments showed that Cu-CS@IN@MIL-100 (Fe) had practical good insecticidal activity (LC 50 = 4.936 mg/L) in controlling Helicoverpa armigera larvae. For long-term control efficacy experiments, after 14 days of application, the Cu-CS@IN@MIL-100 (Fe) treatment (73 %) mortality of Helicoverpa armigera larvae was significantly higher than the 15 % indoxacarb suspension concentrates (SC) treatment (27 %). Moreover, Cu-CS@IN@MIL-100 (Fe) had no adverse effect on cottonseed germination and the acute toxicity to Chrysopa pallens larvae was significantly lower than IN SC. Therefore, MIL-100 (Fe) could be used as an ecological safety carrier for pesticide delivery to improve IN effective utilization and reduce non-target organism risks.
研究领域:
农业科学
·
农药科学
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
FIBERS AND POLYMERS
·
2021
·Vol. 22
·期 2
·345-353
·
IF 2.153
Liu Jun,Sun Meng,Chang Meng-Jie,Fan Si-Meng,Hui Qian,Ni Fu-Rong,Yuan Bin
Novel CoFe 2 O 4 /MIL-100(Fe) (CFO/MIL-100(Fe)) core/shell nanofibers were prepared by successive ionic layer adsorption and reaction (SILAR) assembly of MIL-100(Fe) on electrospun CoFe 2 O 4 nanofibers. The MIL-100(Fe) shells were constructed on the dispersed CoFe 2 O 4 fiber surface with high uniformity, homogeneous thickness and high stability. Due to the inherent porosity of MIL-100(Fe), a higher specific surface area of 225.77 m 2 /g is achieved for the CFO/MIL-100(Fe)-10 sample. The formed CFO/MIL-100(Fe) catalysts exhibit high catalytic activity towards degradation of rhodamine B (RhB) under visible light irradiation. The photocatalytic activity remains above 77 % within 60 min illumination after four cycles. Due to the simple synthetic method, highly uniform structure, strong magnetic recoverable, as well as good photocatalytic performance, the obtained CFO/MIL-100(Fe) core/shell nanofibers could be promising photocatalysts for practical application.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Yanshu Luo,Bingqiong Tan,Xianghui Liang,Shuangfeng Wang,Xuenong Gao,Zhengguo Zhang,Yutang Fang
MIL-100(Fe) has been proven to have good hydrothermal stability and high vapor uptake and is considered as a promising dehumidification material. However, reduction of the production cost and assembly of the adsorbent and glass fiber paper substrate into the MIL-100(Fe) monolith are challenging. This work presented a dry gel conversion strategy for the rapid synthesis of the MIL-100(Fe) monolith at low temperatures. The porosity and crystalline phase of the products obtained under different crystallization temperatures and times were carefully studied. XRD and SEM characterization indicated that the MIL-100(Fe) crystal could be conveniently synthesized on the substrate at a low temperature of 50–70 °C and in a short time of 2–6 h. The spherical particles assembled from crystals dispersed evenly and tightly on the glass fiber paper. The synthesized MIL-100(Fe) monolith had a thickness of about 270 μm and a MIL-100(Fe) loading of 77.7%. Dynamic and static water vapor adsorption tests revealed that the monolithic adsorbent obtained at 50 °C for 6 h had the largest vapor saturation adsorption capacity (0.581 g/g) and the fastest adsorption rate. Moreover, the monolith owned a low regeneration temperature (below 80 °C) and a satisfactory cycle stability. Convenient equipment, mild synthetic conditions, low renewable energy consumption, and good performance will promote its application in the rotary dehumidification system.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Shanshan Chen,Kang Wen,Xiaoting Zhang,Ruize Zhang,Runping Han
Metal organic frameworks are attracting scientific interest in adsorption applications owing to their large surface area and controllable pore size or shape over both microporous and mesoporous domains. Based on this, an iron(III) trimesic acid MIL-100(Fe) was facilely synthesized by hydrothermal treatment and used as adsorbent to remove neutral red (NR) from aqueous solution. MIL-100(Fe) was characterized using X-ray diffraction, scanning electron microscopy and transform infrared spectroscopy. MIL-100(Fe) was studied in view of the adsorption isotherms, thermodynamics, kinetics, and regeneration of the adsorbent. The adsorption kinetics data of NR were found to be in agreement with pseudo-second-order model. Temkin model was observed to be more suitable than Freundlich and Langmuir models in describing the adsorption isotherm. The maximum adsorption quantity was 333 mg g –1 at 313 K from Langmuir model. Thermodynamic parameters indicated that the NR adsorption process was endothermic and spontaneous. The NR-loaded MIL-100(Fe) adsorbent was regenerated and reused using pH = 2, 75% ethanol. A single-stage batch design for NR adsorption onto MIL-100(Fe) was also presented based on Temkin isotherm model equation. Based on the findings, MIL-100(Fe) is a promising adsorbent for the removal of cationic dyes from solution and thus can be used in practical application.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 10
·5621-5627
·
IF 3.108
Shan Huang,Kai-Li Yang,Xiao-Fang Liu,Hu Pan,Heng Zhang,Song Yang
MIL-100(Fe) was used for the first time in the catalytic transformation of hexose sugars into lactic acid (LA). The as-synthesized MIL-100(Fe) was systematically characterized, and its superior morphological and textural properties were demonstrated to contribute greatly to the pronounced catalytic performance in fructose-to-LA conversion (up to 32% yield), as compared with other catalysts like Cu-BTC and MIL-100(Cr). The effects of reaction conditions including temperature, reaction time, and substrate loading were explored. In addition, MIL-100(Fe) could be easily reused for 4 cycles with no evident decrease in catalytic activity.
研究领域:
化学工程
·
催化
·
生物化学
✓ 已验证
产品关联
DOI
高影响因子
Water Reuse
·
2024
·Vol. 14
·期 1
·39-50
·
IF 4.3
Huang Yiru,Li Youyou,Zhong Qingwei,Luo Chen
View large Download slide View large Download slide Close modal Metal-organic framework (MOF) materials, characterized by their porosity and large specific surface areas, exhibit excellent adsorption properties. With the aim of removing Te(IV) from environmental aquatic systems, this study is the first to propose the use of MIL-100(Fe). The material reveals a strong adsorption capacity for Te(IV), with maximum adsorption of 531.9 mg/g, superior to other adsorbent materials. Adsorption isotherm and kinetic models indicate that the adsorption process primarily involves monolayer chemical adsorption. According to the thermodynamic parameters, the adsorption reaction is endothermic. The experiment individually examined factors affecting the material's adsorption performance, including adsorbent dose, initial concentration of Te(IV), pH, adsorption time, and coexisting ions. Even under high ion strength conditions and high concentrations of coexisting ions, the material's adsorption efficiency for Te(IV) still reached over 94%. The material has been successfully applied to remove Te(IV) from lake water, river water, and seawater, yielding satisfactory results. Due to the high salinity and ionic strength of the solution, the removal efficiency of Te(IV) in the seawater matrix was slightly lower than that in freshwater (river and lake water). Thus, this material shows promise for the removal of Te(IV) from complex aquatic systems. MIL-100(Fe) was prepared and characterized. The Te(IV) can be adsorbed by MIL-100(Fe) effectively, and the adsorption process was primarily a monolayer chemical adsorption and an endothermic reaction. The Te(IV) can be removed effectively in environmental water supplies by MIL-100(Fe).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2021
·
IF 5.816
Chengbao Liu,Dongchen Shen,Zhengkai Tu,Song Li
Li + doping is regarded as an effective strategy to enhance the room-temperature hydrogen storage of metal-organic frameworks (MOFs). In this work, Li + is doped into both MIL-100(Fe) and MIL-100(Fe)/graphene oxide (GO) composite, and it is demonstrated that the hydrogen uptake of Li + doped MIL-100(Fe)/GO (2.02 wt%) is improved by 135% compared with Li + doped MIL-100(Fe) (0.86 wt%) at 298 K and 50 bar, which is ascribed to its higher isosteric heat of adsorption (7.33 kJ/mol) resulting from its more accessible adsorption sites provided by doped Li + ions and ultramicropores. Grand canonical Monte Carlo (GCMC) simulation reveals that Li + ions distributing in the interface between MIL-100(Fe) and GO within MIL-100(Fe)/GO composite is favorable for hydrogen adsorption owing to the increased number of adsorption sites, thus contributing to the enhanced hydrogen storage capacity. These findings demonstrate that MIL-100(Fe)/GO is a more promising Li + doping substrate than MIL-100(Fe).
研究领域:
材料科学
·
能源化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）