PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2025
·
IF 2.9
Jiaqi Li,Yidan Zhang,Pingyu Luo,Chun Li,Fanming Zeng,Tiantian Sun,Hanhui Lei,Xiaoteng Liu,Chunbo Liu
Persulphate-based advanced oxidation technology efficiently and cost-effectively removes organic dyes from water but designing stable photocatalytic systems and understanding their reaction mechanisms remain key challenges. Metal–organic frameworks (MOFs) have attracted considerable research attention for degrading organic pollutants owing to their high porosity, tunable structure, and ease of modification. In this study, a series of M-MOF-74 (M = Co, Fe, Ni) photocatalysts are synthesized by a hydrothermal method for methylene blue (MB) degradation. Among them, the Co-MOF-74 photocatalytic synergetic peroxymonosulfate system exhibits high catalytic activity after 30 min of visible light irradiation. MB degradation efficiency reaches 94.8%, and the reaction rate constant is 0.210 min−1, which is approximately 19.44 times higher than the reaction rate constant of the original Co-MOF-74. Compared with Fe-MOF-74 and Ni-MOF-74, Co-MOF-74 exhibits better photocatalytic performance due to the dynamic changes in the valence state of cobalt, which more effectively facilitate the activation of PMS. In addition, this study analyses the possible degradation pathways of MB in water and toxicological evaluations of intermediate products, providing new insights for the effective removal of dyes in water.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Guanhua Zhang,Shaocong Mo,Xiaowei Liao,Feng Liu,Hongtao Xu,Wei Lu
Metal-organic frameworks (MOFs) are interesting materials for carbon dioxide (CO 2 ) adsorption. Herein, novel nanocomposite materials comprising activated carbon (AC) and Magnesium-MOF-74 were synthesized by impregnating different loading ratios of activated carbon into synthesized Magnesium-MOF-74 to yield Magnesium-MOF-74@AC-X (where X represents the Magnesium/AC ratio set to 1:2, 1:1, and 2:1). Compared to Magnesium-MOF-74 alone, Magnesium-MOF-74@AC-X exhibited higher specific surface area, superior thermal stability, elevated CO2 adsorption capacity, and better adsorption selectivity. At 273 K, the adsorption of CO 2 by Magnesium-MOF-74@AC sample containing Magnesium to AC ratio of 1:2 reached 40.31 cm 3 /g, while that of pristine Magnesium-MOF-74 was only 21.01 cm 3 /g. At 298 K, the adsorption capacity reached 29.45 cm 3 /g, while that of pristine Magnesium-MOF-74 was 1.91-fold lower. The linear fitting of the adsorption isotherms of composite in the Henry adsorption region using Henry’s law yielded a CO 2 /N 2 selectivity adsorption capacity of 32.19, a value 4.55-fold higher than pristine Magnesium-MOF-74.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2024
·Vol. 39
·期 6
·1337-1347
·
IF 1.3
Yue Song,Gong Lunjun,Yang Tonghui,Hu Weida,Liu Xiaopan,Gao Pengzhao,Xiao Hanning
We took Co 0.2 Ni 0.8 -MOF-74 with bimetallic synergistic effect as the basic material, and selected rare earth ions Ho, Gd, and Er with ion radii close to Co and Ni as the research objects for doping. The influence of rare earth ion doping amount and doping type on the eNRR performance of the catalyst was explored. The experimental results show that the ammonia yield rate and Faraday efficiency doped with Co 0.2 Ni 0.8 -MOF-0.5Ho are the highest, reaching 1.28 × 10 −10 mol·s −1 ·cm −2 /39.8%, which is higher than the 1.12 × 10 −10 mol·s −1 ·cm −2 /32.2% of Co 0.2 Ni 0.8 -MOF-74, and is about 14.3%/23.7% higher than that without doping, respectively. And the stability of Co 0.2 Ni 0.8 -MOF-0.5Ho is good(after 80 hours of continuous testing, the current density did not significantly decrease). This is mainly due to doping, which gives Co 0.2 Ni 0.8 -MOF-74 a larger specific surface area and catalytic active sites. The catalyst doped at the same time has more metal cation centers, which increases the electron density of the metal centers and enhances the corresponding eNRR performance.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Jiaxin Wu,Yuhan Ma,Haichang Zhang,Haonan Xie,Jin Hu,Chunsheng Shi,Biao Chen,Chunnian He,Naiqin Zhao
Poly(ethylene oxide) (PEO)-based electrolytes have been extensively studied for all-solid-state lithium-metal batteries due to their excellent film-forming capabilities and low cost. However, the limited ionic conductivity and poor mechanical strength of the PEO-based electrolytes cannot prevent the growth of undesirable lithium dendrites, leading to the failure of batteries. Metal–organic frameworks (MOFs) are functional materials with a periodic porous structure that can improve the electrochemical performance of PEO-based electrolytes. However, the enhancement effect of MOFs with different metal centers and the interaction mechanism with PEO remain unclear. Herein, MOF-74s with Cu or Ni centers are prepared and used as fillers of PEO-based electrolytes. Adding 15 wt % of Cu-MOF-74 to the PEO-based electrolyte (15%Cu-MOF/P–Li) effectively improves the ionic conductivity, lithium transference number, and mechanical strength of the PEO-based electrolyte simultaneously. Furthermore, the ordered pore channels of Cu-MOF-74 provide uniform Li-ion transport pathways, facilitating homogeneous Li+ deposition. As a result, the lithium symmetric cell with 15%Cu-MOF/P–Li shows stable cycles for 1080 h at 0.1 mA cm–2 and 0.1 mAh cm–2, and the Li | 15% Cu-MOF/P–Li | LFP full cell exhibits a long cycle life up to 200 cycles at 60 °C and 0.5 C, with a capacity retention rate of 89.7%.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Chemical Engineering and Processing-Process Intensification
·
2024
·
IF 3.8
Xiaocui Zhang,Xiaoxin Wang,Jun Gao,Jiangcheng Li,Xiangfeng Liang,Qinghui Shou
The global need for bromide ions (Br - ) has driven the research focus to extract them from various liquid ores. Highly efficient and selective adsorbent is still lacking. MOF with large surface area and structural stability are promising candidate for Br - extraction. In this work, we prepared Cu-MOF-74 nanocrystals. Abundant hydroxyl groups on them spontaneously reduced Ag + to Ag 0 nanoparticles, resulting in the fabrication of Ag 0 doped Cu-MOF-74. The crystalline structure retains after the doping of Ag 0 when the mass ratio of silver nitrate to MOF is <0.5. The crystals are distorted or even damaged when the ratio is higher than 1.0 according to XRD and DFT calculation. The adsorption capacity of Ag 3 -Cu-MOF-74 is 232.92 mg g -1 , surpassing the capacities of most previously documented adsorbents. The desorption of Br - and thereafter the recovery of adsorbent could be realized through light driven decomposition of AgBr. This MOF adsorbent shows promising application potential in Br - recovery from various liquid ores.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Lei Zhu,Hongye Lu,Tianci Huo,Dongxiao Liu,Zechen Yan,Jianqiang Zhang
The frequent oil leakage accidents cause huge loss of natural resources and serious damage to the ecosystem. Although all kinds of modified sponges have been invented to deal with the offshore oil spills, it is difficult to separate high viscosity crude oil and water-in-oil emulsions. To address these challenges, a modified polyurethane (PU) sponge (PDMS/MOF-74@PU) coated by polydimethylsiloxane (PDMS) with ultra-low surface energy after growing spindle-shaped metal–organic framework structure (MOF-74) on the PU sponge surface was prepared. With the advantages of super-hydrophobic and high porosity, the prepared sponge can selectively and effectively absorb various oils from oil/water mixtures and it has good oil adsorption capacity (18–55 g/g). Meanwhile, the black MOF-74 endows the PDMS/MOF-74@PU photothermal properties for the separation of high viscosity crude oil under the light conditions. As well as, the prepared sponge shows excellent separation performance for the water-in-oil emulsions, the amount of water in the oil could reduce to less than 20 ppm and the separation efficiency could reach as high as 99.9 % after separation. In addition, we used molecular dynamics to verify the mechanism by which PDMS coatings change the surface wettability of materials. With the excellent mechanical property, chemical stability, and thermal stability in various harsh environments, the PDMS/MOF-74@PU have a broad application prospect in the treatment of offshore oil spills.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Hongai Zheng,Meilin Zhu,Derui Wang,Yao Zhou,Xin Sun,Shuangyan Jiang,Mengyao Li,Cunzheng Xiao,Daquan Zhang,Lizhi Zhang
Membrane fouling is one of the main impediments that limit the wide application of Polyvinylidene fluoride (PVDF) membrane. In this study, for the first time, we incorporated the cellulose nanocrystal (CNCs) onto Cu-MOF-74 by physical stirring and then coated the composites on the PVDF membrane to ameliorate the antifouling performance. The PVDF membrane with the addition of CNC/Cu-MOF-74 composite showed enhanced hydrophilicity compared with the pristine membrane, which significantly promoted the permeability and antifouling performance. The Bovine serum albumin (BSA) multiple-cycle antifouling results revealed that the flux recovery ratio (FRR) value (76.9 %) was much higher than that of the pristine membrane (60.8 %). The enhancement of recovery flux was correlated with the increased electrostatic repulsion and hydrophilicity of the modified membrane according to the contact angle test and Zeta-potential measurement. Meanwhile, the CNC/Cu-MOF-74 modified membrane showed improved antibacterial efficiency (96.3 % at 4 h) due to the predominant antibacterial efficacy of Cu-MOF-74. The efficiently antibacterial achievement of modified membrane was attributed to the release of Cu 2+ and the generation of •OH. This study proposed a novel modified membrane with excellent antifouling properties and provided new insights into the fabrication of antifouling membranes with outstanding performance.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2023
·
IF 3.3
Zhiqiang Guo,Jian Zhou,Hui Hou,Xinmiao Wu,Yuan Li
In this study, Mg-MOF-74, an environmentally friendly metal-organic framework material with non-toxic Mg elements as the framework centers, was loaded onto low-cost and green cellulose aerogels via an in-situ growth approach to construct the Mg-MOF-74@CA composite with a three-dimensional porous structure, overcoming the problems that Mg-MOF-74 nanoparticles tend to agglomerate and cannot be easily recovered. The removal performance of the synthesized Mg-MOF-74@CA composite towards Pb(II), Cd(II), and Cu(II) was evaluated by combining batch experiments, model fittings, and characterization analyses (SEM, XRD , FTIR, MIP, TG, and XPS). The results show that the porosity of Mg-MOF-74@CA is 84.447%. The removal of Pb(II), Cd(II), and Cu(II) by Mg-MOF-74@CA reach the equilibriums at about 5 h. And the removal of Pb(II), Cd(II), and Cu(II) by Mg-MOF-74@CA are strongly influenced by solution pH, while almost independent of ionic strength and humic acid (HA). The strong complexation of Pb(II), Cd(II), and Cu(II) with the surface sites of Mg-MOF-74@CA is the main removal mechanism. The maximum adsorption capacities of Mg-MOF-74@CA towards Pb(II), Cd(II), and Cu(II) at 298 K are 223.555, 160.033, and 74.349 mg/g, respectively. Interestingly, the selective binding order of Mg-MOF-74@CA for Pb(II), Cd(II), and Cu(II) is Cu(II)>Pb(II)>Cd(II). In summary, the Mg-MOF-74@CA composite has good application prospects in practical wastewater treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2022
·
IF 11.307
Xue Zhang,Xuelei Tian,Chang Liu,Jing Qiao,Wei Liu,Jiurong Liu,Zhihui Zeng
Metal-organic frameworks (MOFs) have attracted more and more attentions for preparing electromagnetic wave (EMW) absorption materials because of the porous structure , high specific surface area, and designable configuration. Herein, a series of MOF-74 derived nanocomposites were synthesized by hydrothermal process and subsequent carbonization . The EMW absorption performance and the functions of each component were investigated in depth. Moreover, the inherent EMW absorption mechanisms were comprehensively revealed. Benefiting from the synergistic effect of constituents and microstructure, the MnCo-MOF-74 derived MnO/Co/C nanocomposites delivered a minimum reflection loss value of −68.89 dB at the thickness of 2.64 mm and an effective absorption band of 5.3 GHz at the thickness of 2.3 mm. The high EMW absorption performance was ascribed to the optimized impedance matching and multiple attenuation mechanisms including interfacial and dipole polarization loss, magnetic loss, conductive loss, and multiple scatterings capability. This study shed light on exploring high-efficiency MOF-based EMW absorption materials with rational design of components and structure.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 42
·15447-15455
·
IF 4
Xianliang Li,Diwei Deng,Lufang He,Yan Xu
Exploration of credible non-enzymatic glucose sensors with high selectivity and sensitivity is of great significance for early clinical monitoring of glucose concentration and preventing the threat of diabetes to human health. Here, mesoporous carbon (MC) sphere immobilized Co-MOF-74 nanorods (NRs), denoted as Co-MOF-74 NRs/MC, were successfully prepared, in which the nanostructural porous carbon sphere was obtained using cobalt glycolate as the built-in template followed by a subsequent carbonization and acid treatment, and the MC spheres were then in situ deposited on the surface of Co-MOF-74 NRs via a solvothermal method. Benefiting from the good conductivity of the grafted porous carbon spheres and the abundant active sites, as well as the permeability of microporous MOF-74 nanocrystals, the Co-MOF-74 NRs/MC modified glassy carbon electrode (GCE) exhibited effective non-enzymatic glucose sensing performance with a fast response time (less than 3 s) and a glucose sensitivity of 98.0 μA cm−2 mM−1. Furthermore, the Co-MOF-74 NRs/MC/GCE showed a favourable anti-interference capability in the presence of various interferents and good long-term reusability. The applicability of Co-MOF-74 NRs/MC/GCE for glucose sensing in real serum samples was also investigated, verifying the applicability of the electrode for targeted glucose monitoring in practical applications.
研究领域:
生物医学工程
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Haifei An,Weijian Tian,Xin Lu,Huanmei Yuan,Liyun Yang,Hao Zhang,Haoming Shen,Hao Bai
Adsorbents with high adsorption capacity and high selectivity are crucial for carbon capture, utilization and storage (CCUS) technology applied to industrial flue gas to reduce carbon emissions. In this paper, a defect-rich hierarchical porous Mg-MOF-74 was synthesized successfully with MgCl 2 ·6H 2 O used as a metal source considering that the weak coordination of Cl − may interfere with the normal coordination process of metal centers and organic ligands, which causes the formation of crystal defects. Through the analysis of a series of characterizations, ligand deletion of Mg-MOF-74 prepared with MgCl 2 ·6H 2 O was confirmed, and the deleted ligand was estimated to be approximately 20% compared with the traditional Mg-MOF-74 prepared with Mg(NO 3 ) 2 ·6H 2 O, which led to mesopores accounting for 36.9%, and the width of mesopores reached 13.1 nm. Compared with traditional Mg-MOF-74, the adsorption heat of CO 2 at zero load of the defect-rich hierarchical porous Mg-MOF-74 increased from 36 kJ·mol −1 to 46 kJ·mol −1 , and the saturated adsorption capacity of CO 2 under ambient pressure was improved by 15%. Interestingly, the IAST selective adsorption performance of CO 2 /N 2 was increased by 20 times. Compared with the saturated adsorption capacity for traditional Mg-MOF-74, the equivalent adsorption capacity of hierarchical porous Mg-MOF-74 only needs 17 kPa, indicating that it is suitable for carbon capture operation in a real flue environment. Calculations of density functional theory (DFT) confirmed that the active site of the hierarchical porous Mg-MOF-74 has a lower adsorption energy with CO 2 due to the presence of defects, which is regarded to play a key role in improving the CO 2 capture performance.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Zhenfei Wang,Congli Li,Lei Tang,Jiahui Yang,Qi Shi,Jinxiang Dong
Ni-MOF-74 is among the most promising candidates for CO adsorption due to its highest CO adsorption capacity. However, the feasibility of using Ni-MOF-74 in actual CO/N2 pressure swing adsorption (PSA) processing cannot be reliably inferred based solely on its adsorption capacity at normal temperature and pressure. Hence, we systematically studied its CO working capacity and regenerability at different test temperatures and pressure ranges by single-component static and binary-component dynamic (CO/N2, 50%/50% and 30%/70%, v/v) experiments. The static experiments preliminarily indicated an appropriate operating temperature of 100 °C with adsorption–desorption pressures in the range of 3.0–0.1 bar for the PSA process. The working capacity and regenerability of CO were evaluated as 3.41 mmol·g–1 and 66.21% (adsorption–desorption pressure: 3.0–0.1 bar, 100 °C). A higher temperature reduces the binding force between CO and Ni-MOF-74, so that more CO is desorbed, which leads to an increase in the working capacity and regenerability of CO. Furthermore, through CO/N2 binary-component dynamic breakthrough experiments, the optimal operating temperature and CO adsorption partial pressure for the PSA process were determined as 100 °C and 1.5 bar at a total desorption pressure of 0.2 bar. Typically, for a CO/N2 composition of 50%/50%, the CO working capacity and regenerability were 2.66 mmol·g–1 and 85.25% at 100 °C and a CO partial pressure of 1.5 bar (total CO adsorption pressure of 3.0 bar) at a total desorption pressure of 0.2 bar. These results may guide PSA process design and optimization for adsorbents with strong CO binding ability.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）