AICHE JOURNAL
·
2025
·
IF 4
Xingchun Shi,Qian Zhang,Jinting Wu,Haijiao Lu,Hao Qin,Xiao-Dong Zhu,Jian Gao,Yong-Chao Zhang
Electrocatalytic oxidation of 5-hydroxymethylfurfural (HMFOR) offers an energy-efficient route to high value-added chemicals. There is an urgent demand for high-performance non-precious metal catalysts. Herein, the oxygen-deficient FeO/NiO/Ni was synthesized, which has high performance for HMFOR with a conversion rate of 100%, a selectivity of 98.6% for 2,5-furandicarboxylic acid (FDCA), and a Faradaic efficiency of 94.1% at 1.5 V (vs. RHE), superior to most reported non-precious metal catalysts. The efficient catalytic activity of FeO/NiO/Ni is attributed to the high specific surface area and enhanced adsorption and activation of HMF by oxygen vacancies, thereby reducing the rate-limiting step energy barrier of 5-hydroxymethyl-2-furancarboxylic acid to 5-formyl-furancarboxylic acid (*HMFCA→*FFCA). Ni 3+ acts as the active site for direct HMF oxidation catalysis, while Fe doping induces oxygen vacancies that facilitate the formation and stabilization of Ni 3+ species, enhancing their formation and catalytic functionality.
研究领域:
电催化
·
材料化学
·
可持续能源
·
有机电合成
·
多相催化
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Liquan Xiong,Ying Wang,Di Gao,Yueqi Song,Dongsheng Chen
Hydrogen energy is the core of future clean energy, and the study of hydrogen evolution reaction (HER) electrocatalytic mechanisms is essential for efficient production. The development of efficient and low-cost electrocatalysts is a key challenge in achieving ideal hydrogen generation. In this study, a Ni-BDC/TpPa-1 heterojunction material was prepared for the first time, which was converted into a derived heterojunction material (NiO@Ni/N-C) after high-temperature pyrolysis treatment, exhibiting excellent electrocatalytic activity in an alkaline solution. Without iR compensation, the overpotential of HER is only 83 mV at a current density of 10 mA·cm⁻². Compared with thermally decomposed Ni-BDC and TpPa-1 monomer, its electrocatalytic activity is improved by 158 and 435 mV, respectively, and it exhibits excellent stability over 100 h. The design of this novel material offers a new solution for enhancing the efficiency of transition-metal-based catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 34
·2301640
·
IF 13.3
Fan Zhang,Renjie Ji,Xiaoyang Zhu,Hongke Li,Yating Wang,Jingpeng Wang,Fei Wang,Hongbo Lan
Highly active bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) have always been the key factors to affect the performance of zinc–air batteries. However, integrating the independent reaction sites of ORR and OER in a catalyst remains a major challenge. Herein, a collaborative strategy based on defect induction and doping is proposed to prepare the strain-regulated Pt–NiO@Ni sub-micron particles (Pt–NiO@Ni SP). Benefiting from the synergistic effect of tensile strain and Pt-doped, the metallic Ni-based sub-micron particles with tensile strain as the catalyst carriers can effectively optimize the electronic distribution of atomic structures in Pt and NiO on the surface of particles, leading to reduce the energy barrier of intermediates for ORR and OER. Consequently, the Pt–NiO@Ni SP exhibits outstanding bifunctional catalytic activity with the ΔE index of 0.65 V under a low Pt loading, outperforming that of the benchmark Pt/C+IrO 2 catalysts (0.76 V). Impressively, the Pt–NiO@Ni SP-based liquid zinc–air battery develops a high open-circuit potential (1.47 V), excellent energy density (188.2 mW cm −2 ), and favorable cyclic charge–discharge cycling durability (200 h at 20 mA cm −2 ). This work provides an innovative avenue for the rational construction of highly active bifunctional electrocatalysts for practical applications.
研究领域:
材料科学
·
电化学
·
能源存储与转换
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
Hui-Xian Yang,Dong-Lin Zhao,Wen-Jie Meng,Ya-Qian Wu,Yu Yang,Hao Pu,Rui-Ze Gao
Electrochemical energy storage (EES) devices that combine high-performance are essential to resolve the extreme shortage of non-renewable energy sources and environmental issues. Nickel oxide (NiO) is considered to be a promising EES cathode material because of its ultra-high theoretical specific capacitance, whereas the practical applications are greatly limited with poor rate and cycle performance. Herein, we report the yolk-shelled NiO/Ni composites (YS NiO/Ni) that exhibit good charge storage capability in the aqueous electrolyte with high specific capacitance (2207.3 F g −1 at 1 A g −1 ), exceptional rate capability, and ultra-high cycling stability (95.8% retention after 10,000 cycles). The superior property can be ascribed to the special yolk-shelled structure that exposes more redox reaction active sites, and the associate Ni nanoparticles with flower-like NiO which can improve electron transfer as current collectors.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
功能材料
·
电化学能量存储
✓ 已验证
DOI
高影响因子
Journal of Energy Storage
·
2024
·
IF 8.9
Xuefeng Yu,Dongjie Yang,Jinhao Huang,Qiliang Chen,Weifeng Liu,Fangbao Fu,Xueqing Qiu
Nickel oxide is considered a promising anode material for lithium-ion batteries. Nevertheless, its performance is hindered by significant volume expansion and low electrical conductivity, particularly at larger particle sizes, which lead to a notable decrease in lithium storage capacity and rate performance. To address these challenges, we introduce a nanocomposite strategy to synthesise nickel oxide and lignin-derived porous carbon composites (LPC/Ni/NiO). Through in situ polymerization, lignin macromolecules form a uniform 3D network with nickel carbonate, which, during the subsequent carbonisation process, results in the formation of nickel oxide within a conductive carbon network. This approach reduces the nickel oxide to nanosize and enhances the composite's electrical conductivity, effectively integrating the buffering framework of porous carbon with the high storage capacity of nickel oxide. As a result, the LPC/Ni/NiO composite exhibited significantly improved lithium storage capacity. Notably, when employed as an anode material in lithium-ion half-cells, the optimized composite maintained an excellent specific capacity of 1065 mAh/g after 100 cycles at a current density of 0.2 A/g. It also shown exceptional rate performance, delivering a specific discharge capacity of 505 mAh/g at a current density of 2 A/g, with stable cycling performance. The electrochemical reaction process was further validated using in ex-situ EIS. This study offers valuable insights into scalable synthesis methods for oxide nanocomposites, highlighting their potential as promising anode materials for lithium-ion batteries.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Yunxu Yang,Xiaoxi Huang,Yong Shen Chua,Hooi Ling Lee
Fe–SnO 2 @NiO–NF removed 96.85% CIP within 150 min under solar light. • S-scheme heterojunction promotes charge separation and photocatalytic activity. • 3D NiO–NF support enables easy recovery and abundant active sites. • Over 94% degradation activity was retained after four cycles. • DFT and HPLC–MS reveal charge transfer and CIP degradation pathways. Photocatalysis is effective for antibiotic degradation but limited by poor charge separation and difficult recovery of powder catalysts. In this work, a macroscopic p–n heterojunction photocatalyst (Fe–SnO 2 @NiO–NF) was prepared on pre-oxidized nickel foam through in situ growth and microwave-assisted synthesis. XRD confirmed the coexistence of SnO 2 and NiO phases, while HRTEM and XPS analyses verified the successful construction of the Fe–SnO 2 /NiO heterojunction with intimate interfacial contact and interfacial electronic interaction. UV–vis DRS, PL, TRPL, EIS, and photoelectrochemical measurements demonstrated markedly improved light absorption, charge separation and transfer behavior, with a narrowed band gap of 2.92 eV and a prolonged average carrier lifetime of 1.2226 ns. Owing to the enhanced charge separation and the conductive 3D NiO–NF framework, Fe–SnO 2 @NiO–NF exhibited significantly improved photocatalytic activity for ciprofloxacin degradation under solar irradiation, reaching 96.85% removal within 150 min, while the immobilized catalyst could be readily separated from the aqueous solution. ESR and scavenging test identified •O 2 – and h + as the main reactive species, with •O 2 – playing the dominant role, while HPLC–MS revealed the degradation intermediates and pathways. Band structure analysis and DFT calculations demonstrated that the p–n heterojunction follows an S-scheme charge transfer mechanism, promoting efficient charge separation while preserving strong redox capability. The composite retained over 94% of its initial activity after four cycles, showing excellent stability and recyclability. This study provides a practical way to develop efficient and reusable photocatalysts for antibiotic wastewater treatment. Download: Download high-res image (182KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Chemistry-An Asian Journal
·
2018
·Vol. 13
·期 8
·944-949
·
IF 3.692
Shuai Hao,Ninghua Chen,Qin Liu,Ying Xie,Honggang Fu,Yingchun Yang
Graphical Take a Ni : NiO@Ni-P nanosheet arrays behave as efficient electrocatalyst benefiting from the synergistic effect between NiO and Ni-P. As a durable 3D catalytic electrode for oxygen evolution reaction, NiO@Ni-P/Ti exhibits a high activity achieving a geometrical catalytic current density of 10 mA cm −2 at an overpotential of 292 mV in 1.0 m KOH. Cost-effective and highly-efficient electrocatalysts for the oxygen evolution reaction are crucial for electrolytic hydrogen production. Here, we report core–shell NiO@Ni-P nanosheet arrays as a high-performance 3D catalyst for water oxidation electrocatalysis. Such nanoarrays demand overpotentials of 292 and 350 mV to drive geometrical catalytic current densities of 10 and 100 mA cm −2 , respectively, with an activity superior to its NiO and Ni-P counterparts. Notably, this catalyst also shows a high long-term electrochemical durability with a Faradaic efficiency of 98.1 %. Density functional theory calculation reveals that the superior activity benefits from the synergistic effect between NiO and Ni-P.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENERGY & FUELS
·
2020
·
IF 3.421
Fanghui Wang,Yimeng Luo,Yajun Zhang,Yanan Wang,Hong Zhu
A NiO–Ni foam composite carrier was prepared by the hydrothermal method. Ruthenium metal was supported on the NiO–Ni foam by electroplating, obtaining a highly active bush-like Ru/NiO–Ni foam catalyst. To investigate the effect of NiO on the structure and performance of the catalyst, a Ru/Ni foam catalyst was prepared as a reference. The structures of the carrier and both catalysts were characterized by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, and the performances of both catalysts were evaluated in alcoholytic hydrogen production from sodium borohydride. On the carrier with the NiO-treated surface, the active component Ru developed a three-dimensional bush-like structure that enhanced the catalytic activity. Indeed, the hydrogen production from alcoholysis of sodium borohydride was three times higher on the Ru/NiO–Ni foam catalyst than on the Ru/Ni foam catalyst, and the highest rate exceeded 6 L/g/min. The repeated-use stability of the Ru/NiO–Ni catalyst (10 times) also exceeded that of Ru/Ni foam (8 times). However, as both catalysts used the same active component (i.e., Ru), their activation energies were almost identical.
研究领域:
材料科学
·
催化化学
✓ 已验证
DOI
高影响因子
Nanomaterials
·
2020
·Vol. 10
·期 8
·1502
·
IF 4.324
Yayong Li,Chunxiao Xu,Kaiyuan Liu,Pengwan Chen,Xin Gao
N-doped porous carbon encapsulated NiO/Ni composite nanomaterials (N-doped NiO/Ni@C) was successfully obtained by a one-step solution combustion method. This study demonstrates a one-step combustion method to synthesize n-doped porous carbon encapsulated NiO/Ni composite nanomaterials, using carbon dioxide as the carbon source, nickel nitrate as the nickel source, and hydrazine hydrate as the reaction solution. Spherical NiO nanoparticles with a particle size of 20 nm were uniformly distributed in the carbon matrix. The load of NiO/Ni can be controlled by the amount of nickel nitrate. The range of carbon content of recovered samples is 69–87 at%. The content of incorporated nitrogen for recovered samples is 1.94 at%. As the anode of lithium ion battery, the composite material exhibits high capacity, excellent multiplier performance and stable circulation performance. N-doped NiO/Ni@C-2 was applied to lithium ion batteries, and its reversible capacity maximum is 980 mAh g−1after 100 cycles at the current density of 0.1 A g−1. Its excellent electrochemical properties imply its high potential application for high-performance lithium-ion battery anode materials.Keywords:combustion synthesis;CO2reduction;porous carbon;nickel oxide;hydrazine hydrate;lithium ion battery;nanocomposite
研究领域:
材料科学
·
能源科学
·
化学工程
✓ 已验证
DOI
PubMed
高影响因子
Nanoscale
·
2020
·Vol. 12
·期 27
·14615-14625
·
IF 6.895
Yaru Bian,Hao Wang,Zhi Gao,Jintang Hu,Dong Liu,Liming Dai
Trifunctional electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are crucial for many electrochemical devices. Herein, novel trifunctional electrocatalysts of a hierarchically-structured Pt/NiO/Ni/CNT with ultrasmall Pt nanoparticles (∼2 nm) were synthesized via substrate-enhanced electroless deposition. The resulting catalysts exhibited a higher ORR activity (half-wave potential at 0.942 V) than that of the benchmark commercial Pt/C (20 wt%) and a similar OER activity (overpotential of 350 mV at 10 mA cm−2) to that of RuO2 in alkaline media. Moreover, the newly-developed Pt/NiO/Ni/CNT catalysts also showed a high mass activity superior to Pt/C towards the HER in both acid and alkaline electrolytes. The Pt/NiO/Ni/CNT catalysts, when used for overall water splitting, self-powered by two Zn–air batteries with the Pt/NiO/Ni/CNT air electrodes connected into series, displayed superb performance with 1.61 V at 10 mA cm−2. This work represents a breakthrough in the development of facile approaches to trifunctional catalysts from low-cost Earth-abundant materials for efficient energy conversion and storage.
研究领域:
材料科学
·
电化学
·
能源转换与存储
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）