RSC Advances
·
2021
·Vol. 11
·期 4
·2040-2046
·
IF 3.361
Yang Liu,Xin Liang,Jie Zhang,Jimmy Yun,Zuobo Yang
In this study, monodispersed NiRu nanocrystals with a diameter of 3 nm were synthesized at 90 °C via a tuning hot-inject method to lower the temperature of the organic phase synthesis of monodispersed nanomaterials. The key factor for the nanocrystalline formation of NiRu alloy nanocrystals was summarized in detail. Simultaneously, the synergistic effect of Ni and Ru in CO2 methanation was explored. Doping trace Ru can significantly improve the conversion rate of CO2 methanation and CH4 selectivity. The underlying mechanism was studied in detail via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed hydrogen reduction (H2-TPR) and desorption (H2-TPD) tests, and temperature-programmed desorption of CO2 (CO2-TPD). This study gives out a new way for the general synthesis of monodisperse nickel-based nanocrystals and provides a reference for the development and application of monodispersed nanoparticles for CO2 methanation.
研究领域:
材料科学
·
催化
·
纳米技术
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 14
·4624-4636
·
IF 6.177
Yi Yang,Weixin Qian,Haitao Zhang,Zhonghao Han,Hongfang Ma,Qiwen Sun,Weiyong Ying
FeMnxZr and FeMnxZr2Na catalysts prepared by coprecipitation and impregnation methods were applied to investigate the promoting effects of Zr on iron-based catalysts for high-temperature Fischer–Tropsch synthesis (HTFT). Ar physisorption and TEM demonstrated that Zr-promoted catalysts have a larger BET surface area and larger pore volume, which are more conducive to the distribution of active phases. Zr promoted the dispersity of iron particles and reduced the grain size of iron particles, resulting in the improvement of the FTS activity. The CO-TPD and MES results revealed that the introduction of Zr promoted the dissociative adsorption of CO, thereby promoting the formation of the active phase χ-Fe5C2 while suppressing the formation of ε′-Fe2.2C and further improving the FTS activity and the selectivity to C2=–C4= in the hydrocarbon distribution. However, the addition of an excessive amount of Zr caused the excess ZrO2 to cover the surface of the active site, inhibiting the CO dissociative adsorption and the formation of χ-Fe5C2, resulting in a decrease in the CO conversion and the selectivity to C2=–C4=. The XPS and H2-TPR results proved the interaction between Fe2O3 and ZrO2. And the Fe–ZrO2 interaction inhibited the coke deposition and aggregation of the Fe species, as confirmed by XRD and TEM, respectively. The FeMn5Zr2Na catalyst exhibited the highest C2=–C4= selectivity of 34.4% at a CO conversion of 96.3%. And FeMn5Zr2Na displayed the highest production of light olefins (441.6 g h−1 kgCat−1), which was significantly higher than FeMn2Na (162.2 g h−1 kgCat−1).
研究领域:
催化
·
化学工程
·
材料科学
✓ 已验证
DOI
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2019
·
IF 3.074
Baofeng Zhao,Haimei Wu,Weiping Wang,Hongli Liu,Jianqun Liu,Zhiyuan Cong,Chao Gao
The application of non-fullerene (NF) acceptors in bulk-heterojunction (BHJ) polymer solar cells (PSCs) is a promising approach to overcome the inherent drawbacks of fullerene derivatives-based acceptors. In PSCs, complementary absorption as well as matched molecular energy levels between the low bandgap acceptor-donor-acceptor (A-D-A) small molecular acceptor and medium/wide bandgap polymer donor is crucial to achieve high power conversion efficiency (PCE). Alternating polymers based on benzodithiophene (BDT) electron-donating segment and thieno[3,4-c]pyrrole-4,6-dione (TPD) electron-withdrawing segment own medium bandgap and low-lying highest occupied molecular orbital (HOMO) energy level, leading to presentable photovoltaic properties with fullerene derivatives. To probe into the performances of TPD-based polymers in NF-PSCs, two TPD-based polymers containing alkoxy or alkylthienyl modified benzo[1,2-b:4,5-b′]dithiophene (BDT) were synthesized and adopted as electron-donors and blended with A-D-A-type electron-acceptor 2,2′-[[6,6,12,12-tetrakis(4- hexylphenyl)- s -indacenodithieno[3,2-b]thiophene]methylidyne(3-oxo-1 H -indene-2,1(3 H )-diylidene)]]bis(propanedinitrile) ( ITIC ) to fabricate the corresponding photovoltaic devices. The two-dimensional conjugated polymer PBDTT-TPD shows enhanced extinction coefficient, deeper HOMO energy level and better hole transport performance, resulting in improved PCE of 6.17%. To further boost the performances of the polymers, a small molecular acceptor 2,2′-((2 Z ,2′ Z )-((4,4,9,9-tetrahexyl-4,9-dihydro- s -indaceno[1,2-b:5,6-b′]dithiophene-2,7-diyl) bis(methanylylidene))bis(3-oxo-2,3-dihydro- 1H -indene-2,1-diylidene))dimalononitrile ( IDIC ) with down-shifted energy level was also used to blend with the two polymers in PSCs. Despite the open-circuit voltage ( V OC ) of the PBDTT-TPD : IDIC -based device is slightly decreased, the short-circuit current density ( J SC ) and fill factor (FF) are simultaneously improved, yielding an promising PCE of 7.15%. These results indicate that two-dimensional conjugated TPD-based polymers can be potential application as medium bandgap polymeric donor to match with small molecular acceptors having suitable molecular energy levels to get high efficiency in PSCs.
研究领域:
材料科学
·
能源技术
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Peicheng Huang,Weichun Yang,Varney Edwin Johnson,Mengying Si,Feiping Zhao,Qi Liao,Changqing Su,Zhihui Yang
The contamination of soils by mercury (Hg) seriously threatens the local ecological environment and public health. S-functionalized amendments are common remediation technology , yet, Hg re-activation often occurs in the commonly used immobilization remediation by S-functionalized amendments, resulting in an unsatisfactory remediation effect. In this study, a novel FeS–Se functionalized biochar composite (FeS-Se-BC) amendment was prepared and applied for the efficient remediation of Hg-polluted soil. An immobilization efficiency of 99.62% and 99.22% for H 2 O-extractable Hg and TCLP solution-extractable Hg was achieved with the application of FeS-Se-BC (0.05) after 180 d. The analyses of XPS, Hg-TPD, SEM-EDS demonstrated that excellent remediation performance by FeS-Se-BC resulted from the synergistic effect of FeS and Se to form HgS and HgSe concurrently. In comparison to the treatments of biochar and FeS-functionalized biochar (FeS-BC), FeS-Se-BC promoted the transformation of exchangeable, carbonate-bound, and Fe–Mn oxides-bound Hg fractions into organic material-bound, and residual fractions, effectively reducing the risk of Hg-contaminated soil from a highly dangerous level to a low risk. Furthermore, the introduction of Se clearly inhibited the re-activation of Hg and reduced the release of Hg by 81.12% compared to FeS-BC when the ratio of S 2− to Hg was 5: 1 due to the formation of extremely stable HgSe. These results suggest that FeS-Se-BC has good potential for remediation of Hg-polluted soils which provides a new inhibitory idea for Hg re-activation after immobilization.
研究领域:
环境科学
·
土壤修复
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS LETTERS
·
2022
·Vol. 153
·期 3
·921-930
·
IF 2.936
Zhang Kai,Zhang Huanling,Feng Xipan,Wang Yue,Wang Guowei,Zhu Xiaolin,Li Chunyi
The catalytic activities of metal–based catalysts are largely dependent on the properties of their supports. The support (MgO, Al 2 O 3 , MgAl 2 O 4 , SiO 2, and CeO 2 ) effect of the Sn (1.2 wt%) based catalyst for the ethylbenzene dehydrogenation reaction was firstly investigated. The supported Sn-based catalysts were characterized by NH 3 -TPD, BET, XRD, and H 2 -TPR. Among the tested catalysts, the 1.2 Sn/CeO 2 catalyst presented the most effective catalytic activity, achieving a high ethylbenzene conversion of 56.2 wt% at 600 °C. The obvious support effect should originate from the electronic interaction between Sn and supports, instead of the geometric effect resulting from different dispersion of Sn species on carriers. The high activity of the 1.2 Sn/CeO 2 catalyst was attributed to the generation of oxygen vacancies on the CeO 2 surface. A typical strong metal-support interaction (SMSI) could be found in the 1.2 Sn/CeO 2 catalyst according to the comparison of H 2 -TPR, XPS, and Raman spectra result with pure CeO 2 support. The addition of Sn further promoted the generation of more oxygen vacancies by changing the redox properties of CeO 2 , and inhibited the agglomeration of CeO 2 nanoparticles, thereby enhancing greatly the catalyst's ethylbenzene dehydrogenation activity. Graphical Abstract
研究领域:
催化
·
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2021
·Vol. 12
·期 3
·737-749
·
IF 6.119
Zhicheng Xu,Yuran Li,Yuting Lin,Bin Wang,Panting Gao,Tingyu Zhu
The reduction of NO by CO was proposed to be applied for regeneration gas to remove NOx from industrial flue gas with activated carbon purification technology. To improve the activity and sulfur resistance for the reduction of NO by CO in regeneration gas, Cu and Fe modifications on activated carbon were investigated. And various samples were characterized by XRD, XPS, TPD, H2-TPR, in situ DRIFTS and DFT calculations to explain the reaction mechanism and poisoning mechanism. The synergistic effects of oxygen-containing functional groups and metal sites show that –COOH acts as an anchor site for metals and that C–O–C acts as a protective site for Fe3+ under a SO2 atmosphere. Cu2+ sites have a high activity at low temperatures due to the large amount of adsorbed NO and the intermediate NOx− participating in the reaction with the NOx− pathway. Fe3+ sites have a high activity at high temperatures due to the high N–O dissociation activity with the *N pathway and –NCO pathway. DFT calculations proved that the binding Cu2+ and Fe3+ sites have higher activity than free Cu2+ and Fe3+ sites. A high content of SO2 exhibits various poisoning effects, mainly including the sulfation of metal sites, deposition of S, and consumption of CO. AC-Fe-H exhibits excellent resistance and stability against SO2 and H2O due to less S deposition caused by consumption through the S–CO reaction, slight sulfation caused by the protective effect of Fe2+ and C–O–C on Fe3+ sites and better hydrophobicity.
研究领域:
环境科学
·
化学工程
·
材料科学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 23
·13234-13242
·
IF 3.049
Peidong Li,Qiao Han,Xiaomin Zhang,Yangyang Yuan,Yanfei Zhang,Li Xu,Hongchen Guo,Lei Xu
The effect of the introduced base sites in CsX with alkali oxide modification towards side-chain alkylation of toluene with methanol was systematically investigated in the present work. A series of alkali oxide modified CsX with a base properties (base strength and amount) gradient were prepared by impregnating CsX with alkali metal hydroxide. Here, CsX with different base strengths were selected as the parent zeolite, which is favorable to clarify the different types of base site in the modified CsX. The base properties of the samples were elucidated based on the CO2-TPD results as well as with characterization by XPS and FT-IR of adsorbed CO2. It was revealed that the base strength of the oxygen atoms with negative charge (Oδ−) in the zeolite framework can be strengthened by the electron donating function of the alkali oxides in the supercage of CsX. Detailed analysis of the correlation between the reaction behaviors of side-chain alkylation reaction and the base properties of the indicated catalysts was carried out. It was found that the dehydrogenation of methanol to formaldehyde step was promoted by the increasing base properties of Oδ− in the CsX framework and that was the main reason for the promotion of the whole side-chain alkylation reaction. However, it was also found that the stronger base properties of the alkali oxide modified CsX would enhance the formation of active hydrogen atoms, which aggravated the unwanted styrene conversion to ethylbenzene.
研究领域:
催化
·
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CANADIAN JOURNAL OF CHEMICAL ENGINEERING
·
2018
·Vol. 96
·期 12
·2586-2592
·
IF 1.265
Renjie Deng,Kuiyi You,Fangfang Zhao,Pingle Liu,He'an Luo
In this work, a simple method for the highly selective preparation of valuable dinitronaphthalene from 1-nitronaphthalene employing NO 2 as a nitrating agent has been developed. The results demonstrated that HY zeolite as an eco-friendly and stable catalyst exhibits good catalytic performances. The total selectivity to valuable dinitronaphthalene compounds including 1,5-, 1,4-, and 1,3-dinitronaphthalene can reach 87.6 % in our present nitration reaction. Meanwhile, the physico-chemical properties of catalysts were characterized by XRD, FTIR, TG/DTG, BET, and NH 3 -TPD, and the probable nitration reaction mechanism was also suggested in this paper. The present nitration process seems to be a mild, eco-friendly, and economical route for the preparation of valuable dinitronaphthalene compounds.
研究领域:
化学工程
·
催化
·
环境化学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2018
·
IF 8.097
Jingling Li,Zheng Liang,Qiucheng Su,Hu Jin,Kelai Wang,Gang Xu,Xueqing Xu
For an organic–inorganic hybrid quantum dot light-emitting diode (QD-LED), enhancing hole injection into the emitter for charge balance is a priority to achieve efficient device performance. Aiming at this, we employ N,N′-bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) as the additional hole transport material which was mixed with poly(9-vinylcarbazole) (PVK) to form a composite hole transport layer (HTL) or was employed to construct a TPD/PVK bilayer structure. Enabled by this TPD modification, the green QD-LED (at a wavelength of 515 nm) exhibits a subband gap turn-on voltage of 2.3 V and a highest luminance up to 56 157 cd/m2. Meanwhile, such TPD modification is also beneficial to acquire efficient blue and red QD-LEDs. In particular, the external quantum efficiencies (EQEs) for these optimized full-color QD-LEDs are 8.62, 9.22, and 13.40%, which are 3–4 times higher than those of their pure PVK-based counterparts. Revealed by the electrochemical impedance spectroscopy, the improved electroluminescent efficiency is ascribable to the reductions of recombination resistance and charge-transfer resistance. The prepared QD-LEDs surpass the EQE values achieved in previous reports, considering devices with small-molecule-modified HTLs. This work offers a general but simple and very effective approach to realize the low turn-on-voltage, bright, and efficient full-color QD-LEDs via this solution-processable HTL modification.
研究领域:
材料科学
·
光电技术
·
半导体器件
·
光子学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2014
·
IF 2.063
Jianrong Li,Jinsheng Chen,Yanke Yu,Chi He
The Fe–Mn–Ce/CP catalyst prepared by the incipient-wetness impregnation method was investigated for elemental mercury (Hg 0 ) removal in simulated coal-fired flue gas . The incorporation of Fe could remarkably enhance the SO 2 -resistance of Fe–Mn–Ce/CP catalyst at low temperature, and the existence of water vapor had negative impact on Hg 0 removal efficiency. More than 95% of Hg 0 could be removed at 100 °C under the conditions of 60 ppm HCl, 3% O 2 ( v/v ), 5% H 2 O ( v/v ) and 400 ppm SO 2 . Hg-TPD results indicated that Hg 0 adsorption amount decreased after the addition of H 2 O or SO 2 . The XPS results revealed that the incorporation of Fe could enhance the contents of high valence Mn x + (i.e., Mn 3+ /Mn 4+ ) and Ce 3+ species in the composite catalysts, which are favorable for the oxidation process of elemental mercury. The surface characteristics were not the primary factor determining the catalytic activity . Overall, the catalytic performance of the Fe–Mn–Ce/CP catalyst was closely related to the Fe 3+ state, high ratios of (Mn 4+ + Mn 3+ )/Mn 2+ and high content of not fully coordinated cerium species.
研究领域:
环境催化
·
大气污染防治
·
能源化学工程
·
材料科学与工程
·
表面化学
·
烟气净化技术
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2024
·
IF 3.9
Jia Ding,Jinghui Qin,Shengyu Zhou,Yuanhao Wu,Chao Fan,Yulong Li,Jianguo Wang
LaBO 3 ( B = Fe, Co, Ni) perovskite catalysts were prepared by the sol-gel method. The physical properties and active sites were characterized by XRD, BET, SEM, TEM, XPS, EPR, and CO 2 -TPD. The results indicated that catalysts had fine perovskite structure and high crystallinity. The as-synthesized catalysts were used for the glycerol carbonylation with CO 2 to glycerol carbonate (GC). The LaCoO 3 exhibited high conversion and selectivity of 26.3 and 72.4 % at a reaction temperature of 150 °C for 12 h under CO 2 pressure of 3 MPa in the presence of 2-cyanopyridine with DMF as the solvent. It was found that surface oxygen defects favored the glycerol conversion, while the high concentration of total weak and medium basic sites promoted the GC selectivity. The LaCoO 3 also displayed excellent reusability performance, indicating its great potential in industrial applications.
研究领域:
化学
·
催化
·
材料科学
·
绿色化学
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2022
·
IF 6.562
Zhuangqing Wang,Xinchao Wang,Chao Zhang,Yinze Yang,Leilei Zhou,Haiyang Cheng,Fengyu Zhao
Catalytic conversion of furfural and its derivatives to value-added C 5 molecules has attractive much attention in the field of biomass conversion . In this paper, the selective hydrogenolysis of tetrahydrofurfuryl alcohol to 1,5-pentanediol has been studied over a series of PrO x promoted Ni/Al 2 O 3 catalysts. The catalytic performances and the promoting effects of PrO x , as well as the role of Ni and PrO x species have been discussed. The surface properties and structure of catalysts were examined by TEM, XRD, XPS, H 2 -TPR, H 2 -TPD, in-situ DRIFTS, etc. The presence of PrO x species promotes the reaction rate and changes product selectivity significantly, and a 79.2% 1,5-pentanediol selectivity can be obtained at 88.4% conversion over the NiPr 1.2 /Al 2 O 3 catalyst. The synergistic effect between defect-rich PrO x and the adjacent active Ni species has been confirmed to contribute to the superior catalytic performances. These results provide useful knowledge for the activation of cyclic ether bonds and the design of heterogeneous catalysts with lanthanide oxide supports.
研究领域:
催化
·
生物质转化
·
化学工程
·
材料科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）