APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Liyuan Zhang,Shu Yang,Yuekun Lai,Hui Liu,Yiang Fan,Cao Liu,Haiying Wang,Liyuan Chai
Gaseous Hg 0 is one of the most deadly and hard-to-dispose pollutants. The oxidation of Hg 0 is a promising route, but the rational design and synthesis of highly efficient catalysts still remain grand challenges. Herein, CuO@Cu 2 O (or Cu x O) heterostructured nanoparticles uniformly monodispersing on porous carbon monolith were designed and successfully synthesized using oligo( m -phenylenediamine)-Cu 2+ complex as raw material. The Cu x O-carbon catalyst contains ∼28 wt% of Cu. Based on density functional theory calculation, the CuO@Cu 2 O junction interfaces can accelerate the Hg 0 oxidation by significantly reducing the energy barriers of reaction. Only 1 mg of the catalyst can catalyze the oxidation of more than 90 % of Hg 0 with [HCl] = 0.5 ppm, [O 2 ] = 6 vol%, T = 150 °C. The poisoning effect of either SO 2 or H 2 O on the catalysts is weak. Moreover, a long-term test confirmed that the Hg 0 oxidation rate can maintain more than 90 % even in the co-presence of SO 2 (5000 ppm) and H 2 O (10 vol%).
研究领域:
环境催化
·
材料化学
·
大气污染控制
·
纳米材料
·
表面科学
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2018
·
IF 4.514
Yuxin He,Qiuyu Chen,Song Yang,Chang Lu,Mengting Feng,Yuanli Jiang,Guoxi Cao,Jianping Zhang,Chuntai Liu
The epoxy nanocomposites with Fe 3 O 4 modified graphene oxide (Fe 3 O 4 /GO) were used to influence the micro-cracks resistance of carbon fiber reinforced epoxy (CF/EP) laminate at 77 K. Fe 3 O 4 /GO with good paramagnetic properties were prepared by co-precipitation method and used to modify epoxy for cryogenic applications. Fe 3 O 4 /GO modified CF/EP laminates were also prepared through vacuum-assisted resin transfer molding (VARTM). The results show that the Fe 3 O 4 /GO can effectively improve the mechanical properties of epoxy (EP) matrix at 77 K and reduce the coefficient of thermal expansion (CTE) of EP matrix. It also can obviously improve the micro-cracks resistance of CF/EP composites at 77 K. Compared to neat EP, the CTE of Fe 3 O 4 /GO modified EP composite is decreased 51.6%. Compared to CF/EP composite, the micro-cracks density of Fe 3 O 4 /GO modified CF/EP composite at 77 K is decreased 60.0%.
研究领域:
材料科学
·
高分子复合材料
·
低温工程
·
纳米复合材料
·
力学性能
✓ 已验证
DOI
高影响因子
IONICS
·
2022
·Vol. 29
·期 2
·505-518
·
IF 2.961
Yang Dongping,Xiong Deping,Feng Zuyong,Wen Kunhua,Wu Kaidan,He Miao,Feng Yefeng
Sn-based materials receive a lot of attention because of their high theoretical specific capacity, acceptable price, and good electrical conductivity. However, Sn-based materials have a large volume expansion in the circulation process, leading to the rapid decay of capacity. According to the ion diffusion time formula: t = L2/2D, where L is the diffusion length or the particle size, and D is the diffusion constant of the ions and the electrons. It can be seen that reducing the particle size can significantly improve the multiplier performance of the material. At present, the main methods for preparing nano-sized metal/carbon composites are the high-energy ball grinding method, hydrothermal method, calcined metal, and organic matter precursor. In this paper, sodium alginate was used as a precursor system for the Fe-doped Sn @3D carbon composite material, which was applied to the lithium-ion battery anode to obtain excellent electrochemical performance (1133.5 mAhg −1 after 200 cycles at 0.2 Ag −1 ). The increase in the specific surface area of Fe-doped Sn @3D carbon also increases the charge transfer efficiency and further improves the multiplier performance of the electrode. Meanwhile, the nano-size and structure can better buffer the volume expansion and protect the structure of the electrode.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
Journal of Environmental Sciences
·
2024
·
IF 5.9
Xixian Huang,Bing Yang,Ye Dou,Yang Ding
The abiotic oxidation of divalent manganese (Mn(II)) and the formation of Mn oxides are important geochemical processes, which control the mobility and availability of Mn as well as element cycling and pollutant behavior in soils. It was found that iron (oxyhydr)oxides can catalyze Mn(II) oxidation , but the effects of the coexisting dissolved organic matter (DOM) molecules on the catalysis of different iron (oxyhydr)oxides for Mn(II) oxidation are poorly understood. Herein, we investigated Mn(II) oxidation under the impacts of the interactions between iron (oxyhydr)oxides (i.e., ferrihydrite, goethite and hematite) and DOM molecules. Simultaneously, we elucidated the variations of DOM composition and properties. Our results indicated that the catalysis of iron (oxyhydr)oxides for Mn(II) oxidation was significantly inhibited by DOM. Moreover, DOM had less inhibiting effect on the catalysis of ferrihydrite for Mn(II) oxidation and the formation of Mn oxides (e.g., hausmannite and buserite) relative to goethite and hematite, which was partially because of the higher electron transfer capacities of ferrihydrite. Meanwhile, DOM molecules with high nominal oxidation state of carbon (NOSC), molecular weight, unsaturation and aromaticity were selectively adsorbed and oxidized by Mn oxides , including the oxygenated phenols and polyphenols. The newly formed molecules mainly belonged to phenols depleted of oxygen and aliphatics. Furthermore, NOSC was a key molecular characteristic for controlling DOM composition during DOM adsorption and oxidation by Mn oxides when iron minerals were present. Overall, our research contributes to understanding Mn(II) oxidation mechanisms under heterogeneous systems and behaviors of DOM molecules in the environment.
研究领域:
环境地球化学
·
土壤化学
·
水文地球化学
·
有机-矿物相互作用
·
元素生物地球化学循环
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Shuya Wang,Yaxin Chen,Bin Cui,Bo Li,Shuxuan Wang,Yanhua Cui,Zhicheng Ju,Quanchao Zhuang
Computer simulation accelerates the selection and application of new electrode materials. The First-principles calculations based on density functional theory (DFT) are performed to evaluate the performance as cathode for Potassium ion batteries (PIBs) on the structure, electronic conductivity and ionic diffusion of O-doped KMnF 3 . After taking comprehensive consideration of the calculation results, the nanostructured O-doped KMnF 3 was synthesized and the structure and electrochemical properties were further improved by carbon coating. Here, we report a new etch pathway to create a new class of carbon-coated perovskite fluoride to improve the performance of PIB in terms of rate capability and cycle stability. These new material design concepts will help discover and synthesize new materials for PIBs.
研究领域:
材料科学
·
电化学
·
计算材料学
·
能源存储
·
无机化学
·
纳米材料
·
固体物理
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2018
·
IF 4.667
Xintong Zhou,Chang-jun Liu
Structured porous carbon materials have been extensively applied for catalyst, sensor, adsorbent, energy storage materials and many others. However, the preparation of such carbon materials in a controllable way remains a significant challenge. In this work, 3D printing has been employed to prepare porous carbon structures with tailorable pore sizes. A starch/gelatin ink has been applied as carbon source with SiO 2 monodispersed spheres as hard template. The process exhibits an excellent printing accuracy. Controllable meso and macro structures can be thereby obtained. The printed monolithic structures have been used as metal-free catalysts for the selective oxidation of benzyl alcohol, as an illustration. The monolithic and meso/macro-porous structure has a remarkable influence on the reaction rate. A high conversion with high benzaldehyde selectivity has been achieved. The 3D printing strategy provides us a simple, low cost and reliable way of fabricating carbon structures with designable meso/macro-pores, which is promising for many other applications beyond catalysis.
研究领域:
材料科学
·
催化化学
·
能源材料
·
纳米结构材料
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Dan Baohui,Mahmood ul Haq,Salah Ud Din,Shabab Hussain,Shao Wenyi,Wu Jingmin,Chi Hanwen,Zhizhen Ye,Liping Zhu
The SF 6 gas in gas-insulated switchgear (GIS) systems decomposes into SO 2 F 2 , SOF 2 , SO 2 , and H 2 S under abnormal conditions such as partial discharge. The detection of these decomposition gases with high sensitivity is essential for the safe operation of GIS devices. Herein, we report the synthesis of cerium oxide and multiwalled carbon nanotube composite (CeO 2 @MWCNTs). The CeO 2 @MWCNTs composite was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy , X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis. The CeO 2 @MWCNTs composite sensor provided a response value of 7.7 at 100 ppm of SO 2 F 2 at a low operating temperature (50 °C), and the response and recovery features of the CeO 2 @MWCNTs composite sensor were recorded at 43 and 28 s, respectively. Moreover, the composite sensor exhibited excellent stability after two months. The developed CeO 2 @MWCNTs composite sensor can offer an exceptional platform for gas sensing applications in diverse fields.
研究领域:
材料科学
·
气体传感技术
·
电力设备监测
·
纳米复合材料
·
环境监测
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2017
·
IF 4.075
Guangshun Wu,Lei Chen,Li Liu
Effects of silane and silica enrichment of carbon fibers (CFs) on interfacial properties of methylphenylsilicone resin (MPSR) composites were investigated. CFs were oxidized, grafted with 3-aminopropyltriethoxysilane (APS) and then modified with silica nanoparticles prepared by the sol-gel polymerization of tetraethoxysilane (TEOS). Chemical structures of CFs were characterized by confirming the successful grafting. Scanning electron microscopy (SEM) showed a uniform distribution of silica nanoparticles on the CFs surface. The interlaminar shear strength (ILSS) and impact toughness of silanized CF (CF-Siloxane) composites were 12.05% and 7.46% higher than those of untreated composites. However, ILSS and impact toughness of the hybrid fiber (CF/Si) composites obtained from the hydrolysis of different concentrations TEOS improved significantly, especially for grafting silica enrichment with the TEOS concentration of 0.05 mol/L (CF/Si0.05), increasing 45.64% in ILSS and 29.59% in impact properties. Moreover, the hydrothermal aging resistance was also improved greatly. Meanwhile, functionalization processes did not decrease fiber tensile strength .
研究领域:
复合材料科学
·
高分子材料
·
表面改性
·
界面工程
·
材料化学
✓ 已验证
DOI
高影响因子
Materials Today Physics
·
2023
·
IF 11.5
Ruifan Si,Zhongwei Zhang,Chengyan Liu,Ying Peng,Xiaobo Bai,Baoquan Feng,Junliang Chen,Jie Gao,Lei Miao
With developing of thermoelectric (TE) performance, GeTe-based TE materials present great promising application at medium temperatures as a replacement for toxic PbTe. However, the further improvement of TE properties is severely constrained by the coupling of electron and phonon transport. In this study, we achieve decoupled electron and phonon transport by effectively creating a special phase boundary to scatter phonon but transmit electron by implanting multi-walled carbon nanotubes (MWCNTs) into Bi-doped GeTe. With the help of this decoupling mechanism, the power factor is effectively improved and reaches up to ∼4482 μW −1 m −1 K −2 at 673 K while the thermal conductivity shows an obvious drop to ∼1.27 W m −1 K −1 at 723 K, leading to an impressive increase in zT to a maximum value of ∼2.3 at 723 K. In particular, a competitive average zT value of ∼1.43 in the temperature range of 323–773 K is obtained, which is at a high level in lead-free GeTe-based materials. Our method could be used as a guidance for the decoupling of electron and phonon transport in other TE materials .
研究领域:
材料科学
·
凝聚态物理
·
能源材料
·
热电转换
·
纳米复合材料
✓ 已验证
DOI
高影响因子
IONICS
·
2019
·Vol. 26
·期 2
·649-660
·
IF 2.289
Yan Honglin,Ru Qiang,Gao Ping,Cheng Shikun,Ling Francis Chi-Chung
In the past few years, silane coupling agents are often used to modify the surface of silicon materials; however, researches in preparation of SiO X -based materials pyrolyzed from silane coupling agents are seldom reported. Hence, in order to prepare amorphous SiO X @C anodes for Li-ion storage, we adopted three kinds of silane coupling agents as organic silicon sources. The results show that silane coupling agents with vinyl group is the optimum organic silicon source. Owing to the strong chemical bonds of Si–O–C, amorphous SiO X particles are uniformly embedded in carbon matrix, forming monodisperse microbeads architecture with good buffer abilities. Therefore, the V-SiO X @C anodes derived from silane coupling agents with vinyl groups show good electrochemical performance, retaining a reversible discharge capacity of 940 mAh g −1 at a current density of 100 mA g −1 after 200 cycles, and it still depicts a good long-term cycling durability, maintaining 739 mAh g −1 at a current density of 400 mA g −1 after 400 cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
锂离子电池
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Bin Qin,Yifei Cai,Xiaoqing Si,Chun Li,Jian Cao,Weidong Fei,Junlei Qi
The practical application of lithium-sulfur (Li-S) batteries is impeded by the shuttle effect of intermediate polysulfides and the inherent sluggish kinetics. Herein, Mo 2 C nanocatalysts anchoring on holey graphene scaffold (Mo 2 C@HGr) is explored as a lightweight and ultrathin modified separator to conquer the above issues. The artificially customized holes on holey graphene sheets facilitate ionic transfer and electrolyte penetration, and further enhance the sulfur utilization under lean electrolyte conditions. The experimental results together with theoretic calculation demonstrate the favourable chemical adsorption ability of Mo 2 C sites that blocking the diffusion of LiPSs. Abundant triple-phase interfaces among Mo 2 C nanomediators, holey graphene and electrolyte boost the conversion kinetics of the intercepted LiPSs. As a result, the cell with Mo 2 C@HGr modified separator shows superior rate capability (836 mAh g −1 ) even at 5 C current with a negligible Mo 2 C@HGr loading of 0.08 mg cm −2 . Furthermore, ultrahigh areal capacity of 5.9 mAh cm −2 is still attained with high sulfur loading of 6 mg cm −2 under lean electrolyte operation (E/S = 5.6 µL mg −1 ). This design concept can be extended to other graphene based multifunctional nanocomposite toward the development of more practical Li-S batteries.
研究领域:
电化学
·
能源材料
·
纳米催化
·
电池技术
·
功能复合材料
✓ 已验证
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2021
·
IF 7.328
Hongyuan Zhao,Bo Li,Runqiang Liu,Yuqi Chang,Hongliang Wang,Lin Zhou,Sridhar Komarneni
Herein, a cost-effective and scalable ultrasound assisted approach was proposed to prepare the nanocomposite of halloysite nanotubes/zirconia/carbon black (Hal/ZrO 2 /CB), which was used to fabricate a novel electrochemical sensor for the highly sensitive determination of methyl parathion (MP). In the Hal/ZrO 2 /CB nanocomposite, Hal with large specific surface area and numerous active sites could enhance the adsorption capacity and accelerate the redox reaction of MP; ZrO 2 nanoparticles with high affinity toward the phosphate group could contribute to good recognition performance for MP; CB nanoparticles with good dispersibility formed an interconnected pearl-chain-like conductive network. Benefitting from the synergistic effect of the three components, the Hal/ZrO 2 /CB/GCE (glassy carbon electrode) sensor showed a remarkably low detection limit of 5.23 nM in a good linear MP detection range of 0.01–10 μM. The Hal/ZrO 2 /CB/GCE sensor possessed a pretty decent practicality with satisfactory RSD and recovery results for the determination of MP in peach, pear, and apple juices. Therefore, the Hal/ZrO 2 /CB/GCE sensor has important implication on the quite sensitive detection of MP.
研究领域:
分析化学
·
纳米科学与技术
·
环境监测
·
食品安全
·
电化学传感
·
农药残留检测
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）