MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2024
·
IF 4.2
Yonghua Wang,Ruilin Wang,Yucheng Hu,Lin Zheng,Ganhua Fu,Gang Wang,Yufeng Zhou,Qiaomu Xie,Jingong Pan,Shou Peng
In recent years, the study of Cu (Ӏ) precursors in high-performance CdTe thin-film solar cell devices has received increasing attention. However, few studies have been reported on nanoscale Cu (I) precursors in large-area CdTe devices (≥1 cm 2 ). Here, three different Cu (Ӏ) nano precursors have been rapidly prepared by solution method (CuCl ethanol solution, CuI acetonitrile solution, and CuSCN aqueous ammonia solution) and their effects on the performance of commercial large-area CdTe thin-film solar cells have been investigated. The results show that the distribution amount and uniformity of the nano precursor particles on the CdTe back surface have a large impact on the device performance. The CuCl nanoparticles are more uniformly distributed and the device performance is more excellent. CuI nanoparticles easily formed clusters at grain boundaries. Denser distribution of CuSCN nanoparticles . The thermal diffusion conditions (temperature, time and precursor concentration) have a significant effect on the device performance, but the most reasonable thermal diffusion conditions tend to be the same for all devices. This suggests that the thermal diffusion conditions are determined by the nature of the CdTe absorber layer itself and are not interfered by different nano precursors.
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Ziyi Qin,Jinju Xu,Yuanxin Cao,Chunhui Liao,Tian Lan,Shuyun Shi
Highly sensitive monitoring of pesticides has garnered attention for food safety. Here, a ratiometric fluorescent probe (AG-CDs-Al 3+ /CdTe QDs) was fabricated for specific and sensitive sensing of glyphosate. Surface modifications revealed the chelation-enhanced fluorescence process between the surface -OH of AG-CDs and Al 3+ . Positively charged green-emission AG-CDs-Al 3+ assembled with negatively charged red-emission CdTe QDs, and photoinduced electron transfer (PET) occurred from CdTe QDs to AG CDs-Al 3+ . Glyphosate specifically coordinated with Al 3+ , causing remarkable variations in F 500 /F 630 (linear range, 0.2–4.0 μM; detection limit, 5.7 nM) and a distinguishable green-yellow-red color change on the paper platform (linear range, 0.5–8.0 μM; detection limit, 26 nM). Furthermore, for real sample analysis, the sensor has the advantages of fast response (5 min), excellent accuracy (spiked recoveries, 95.0–105.0 %), high precision (relative standard deviation, < 3.33 %), and superior specificity, which endowed the designed sensing platform with great potential practicality in the field of food analysis.
研究领域:
食品安全
·
分析化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2018
·
IF 2.88
Si-Nan Wang,Jian Zhu,Xin Li,Jian-Jun Li,Jun-Wu Zhao
Cadmium-caused environmental pollution and diseases have always been worldwide problems. Thus it is extremely urgent to establish a cheap, rapid, simple and selective detection method for trace cadmium in drinking water . In this study, a fluorescence “turn-on” method based on ethylene diamine tetraacetic acid (EDTA)-etched CdTe@CdS quantum dots (QDs) was designed to detect Cd 2+ . High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) were utilized for chemical and structural characterization of the as-prepared QDs. Based on chemical etching of EDTA on the surface of CdTe@CdS QDs, specific Cd 2+ recognition sites were produced, and then results in fluorescence quenching . The introduction of Cd 2+ could identify these sites and restore the fluorescence of the EDTA-QDs system. Under the optimum conditions, the nanoprobe shows a linear response range from 0.05 to 9 μM with a very low detection limit of 0.032 μM. In addition, the reported fluorescence probe in this work displays a good selectivity for trace Cd 2+ over other metal ions and an admirable practicability in real water samples.
研究领域:
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
VACUUM
·
2023
·
IF 4
Zhe Huang,Siyuan Wu,Baishan Chen,Siwei Tang,Yunzhu Ma,Wensheng Liu
Defects deteriorate the optical and electronic properties of the cadmium zinc telluride (CZT) single crystal . However, the growth of defects, such as vacancies and precipitation, could not be avoided in the industrial-grade preparation of CZT single crystal. Therefore, it is crucial to explore ways to eliminate defects after growth. This paper employs one-step heat treatment with the CdTe compound as an annealing atmosphere source. After annealing, some large-size Te inclusions are eliminated in CZT crystal, but nano Te precipitates still exist. At the same time, the crystal surface becomes rougher, caused by the thermal migration of Te droplets, dislocation proliferation, and aggregation. Increasing annealing time, dislocations migrate, decompose, and interact with each other to form dislocation walls, stacking faults or terminating at the surface, reducing dislocation etch pit density. In addition, a large number of ordered phases are still found in the crystal. Single annealing with CdTe significantly improved the crystal's optical and electrical properties. After 180 h annealing, the infrared (IR) transmittance of the as-grown wafer increased from 40% to 65%, and resistivity increased from 2.2 × 10 9 Ω cm to 1.7 × 10 11 Ω cm. Compared to reducing the Te precipitation phase, these increasements were mainly dominated by replacing point defects , like Cd vacancies.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2023
·Vol. 15
·期 28
·3411-3419
·
IF 3.1
Jiajia Wang,Wenhui Dong,Xiaomin Yang,Yanan Li,Baokang Jin
Electrochemical detection of human-IgG via biosensors is vital in clinical diagnostics, owing to their simple equipment, facile operation, high selectivity, economical, short diagnostic time, fast response, and easy miniaturization, but the need to improve sensitivity for protein detection is still a barrier limiting its wider practical applications. A hypersensitized electrochemical biosensor based on steric effects for IgG detection was developed in this work. The results indicate that IgG-modified sig-DNA attached to CdTe quantum dots (CdTe-sig-DNA) limited the ability of CdTe-sig-DNA or CdTe-sig-DNA-IgG conjugate to hybridize through the captured DNA strand (cap-DNA) immobilized on a chitosan/nitrogen-doped carbon nanocomposite (CS/N-C) modified glassy carbon electrode surface (GCE). The concentration of IgG based on CdTe concentration was detected by differential pulse anode stripping voltammetry (DPASV) on the electrode surface. The efficiency for hybridizing CdTe-sig-DNA with cap-DNA was found to be logarithmically inverse to the concentration of IgG attached. A highly sensitive and selective detection of IgG from 5 pM to 50 μM with a relatively low detection limit of 1.7 pM was achieved. Therefore, the steric hindrance effect of IgG limited the quantity of DNA that could be functionalized on CdTe QDs, significantly improving the signal, and providing a practical strategy for the clinical analysis of IgG.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2023
·
IF 4.4
Yuting Wang,Fengming Zhang,Jia Liu,Bin Yang,Yue Yuan,Yanyan Zhou,Shuyun Bi
A method was established for detecting the content of nitrofurazone (NFZ) by fluorescence quenching of N-Acetyl-L-Cysteine (NAC) coated cadmium telluride quantum dots (CdTe QDs). By means of transmission electron microscopy (TEM) and multispectral methods such as fluorescence and ultraviolet visible spectra (UV–vis), the synthesized CdTe QDs were characterized. The quantum yield ( φ ) of CdTe QDs was measured as 0.33 by reference method. The CdTe QDs had a better stability, the RSD of fluorescence intensity was 1.51% in three months. NFZ quenching the emission light of CdTe QDs was observed. The analyses of Stern-Volmer and time-resolved fluorescence suggested the quenching was static. The binding constants ( K a ) between NFZ and CdTe QDs were 1.14 × 10 4 (293 K), 0.74 × 10 4 (303 K) and 0.51 × 10 4 (313 K) L mol −1 . The hydrogen bond or van der Waals force was the dominated binding force between NFZ and CdTe QDs. The interaction was further characterized by UV–vis absorption as well as Fourier transform infrared spectra (FT-IR). Using fluorescence quenching effect, a quantitative determination of NFZ was carried out. The optimal experimental conditions were studied and determined as following: pH was 7 and contact time was 10 min. The effects of reagent addition sequence, temperature and the foreign substances including some metals (Mg 2+ ; Zn 2+ ; Ca 2+ ; K + ; Cu 2+ ), glucose, bovine serum albumin (BSA) and furazolidone on the determination were studied. There was a high correlation between the concentration of NFZ (0.40 – 39.63 μg mL −1 ) and F 0 / F with the standard curve F 0 / F = 0.0262 c + 0.9910 ( r = 0.9994). The detection limit (LOD) reached 0.04 μg mL −1 (3 S 0 / S ). The contents of NFZ in beef and bacteriostatic liquid were detected. The recovery of NFZ was 95.13% – 103.03% and RSD was 0.66% – 1.37% ( n = 5).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
·
2022
·
IF 1.404
Yu-Hua Liu,Li-Ju Tan,Kun-Peng Wang,Jiang-Tao Wang
In this work, a sensitive fluorescent sensor for the detection of ciprofloxacin (CIP) was developed by wrapping the surface of CdTe quantum dots (QDs) with molecularly imprinted polymers (MIPs). The [email protected] were synthesized via a simple sol–gel method using 3-aminopropyltriethoxysilane (APTES) as the functional monomer and tetraethoxysilane (TEOS) as the crosslinker. The fluorescence emission of the probe was at 643 nm. Linear calibration curves were obtained in the range of 0.5–24 μ M for CIP with the detection limit of 0.23 μ M (S/N = 3). The fluorescent probe was successfully applied to the determination of CIP in seawater samples with the spiked recoveries ranging from 98.2% to 110.6% and the relative standard deviation (RSD) was less than 10.7%. It is the first time that QDs with molecularly imprinted polymers ( [email protected] ) were introduced for separation and detection of CIP in seawater and obtained good specific identification ability and potential practical value.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2017
·
IF 5.401
Ji Yang,Zheng-Zhong Lin,Hui-Ping Zhong,Xiao-Mei Chen,Zhi-Yong Huang
A novel fluorescent probe based on CdTe QDs coated with molecularly imprinted polymers (MIP) was prepared for the determination of leucomalachite green (LMG) with the method of synchronous fluorescence quenching. When the wavelength interval of excitation and emission positions (Δl) was set as 340 nm, the strongest synchronous fluorescence emission of MIP-coated QDs was achieved at 260 nm, enabling the maximum fluorescent quenching of LMG because of the inner filter effect. According to this principle, a synchronous fluorescence quenching method for the rapid detection of LMG in fish was developed. MIP-coated QDs were synthesized using acrylamide (AM) and ethylene glycol dimethacrylate (EGDMA) as functional monomers and cross-linker, respectively. MIP-coated QDs with an average diameter around 67 nm were obtained at the optimum conditions (the molar ratio of 1:8:20 of LMG, AM and EGDMA, 60 mL of acetonitrile, 28 h of polymerization time). The synchronous fluorescence of MIP-coated QDs was linearly quenched by LMG at concentrations from 0.1 to 20 μmol L −1 . Detection limit was 30 nmol L −1 (3 σ , n = 9) with spiked recoveries from 94.0% to 107.8% in fish samples. The results indicate that the method can be applied to the accurate and rapid detection of LMG residues in fish samples.
研究领域:
分析化学
·
食品安全
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
SENSORS
·
2024
·Vol. 24
·期 15
·5039
·
IF 3.4
Yuhong Cui,Xintai Li,Xianhong Wang,Yingchun Liu,Xiuli Hu,Shengli Chen,Xiongwei Qu
The development of fluorescent molecular imprinting sensors for direct, rapid, and sensitive detection of small organic molecules in aqueous systems has always presented a significant challenge in the field of detection. In this study, we successfully prepared a hydrophilic colloidal molecular imprinted polymer (MIP) with 2,4-dichlorophenoxyacetic acid (2,4-D) using a one-pot approach that incorporated polyglycerol methacrylate (PGMMA-TTC), a hydrophilic macromolecular chain transfer agent, to mediate reversible addition-fragmentation chain transfer precipitation polymerization (RAFTPP). To simplify the polymerization process while achieving ratiometric fluorescence detection, red fluorescent CdTe quantum dots (QDs) and green fluorescent nitrobenzodiazole (NBD) were introduced as fluorophores (with NBD serving as an enhancer to the template and QDs being inert). This strategy effectively eliminated background noise and significantly improved detection accuracy. Uniform-sized MIP microspheres with high surface hydrophilicity and incorporated ratiometric fluorescent labels were successfully synthesized. In aqueous systems, the hydrophilic ratio fluorescent MIP exhibited a linear response range from 0 to 25 μM for the template molecule 2,4-D with a detection limit of 0.13 μM. These results demonstrate that the ratiometric fluorescent MIP possesses excellent recognition characteristics and selectivity towards 2,4-D, thus, making it suitable for selective detection of trace amounts of pesticide 2,4-D in aqueous systems.
研究领域:
分析化学
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2020
·
IF 3.594
Hengye Chen,Ou Hu,Haiyan Fu,Yao Fan,Lu Xu,Qingjun Meng,Lei Zhang,Wei Lan,Chunying Wu,Siyi Tang,Yuanbin She
A fluorescence paper-based sensor method by simply using thiomalic acid modified CdTe (TMA-capped CdTe) was proposed for visual detection of silver ions (Ag + ). Red-emission TMA-capped CdTe with a large amount of carboxyl groups on the surface could be combined with Ag + by electrostatic interaction, thus leading to the fluorescence quenching. It was found that the adding of amino acids contributed to fluorescence recovery by the leaving of Ag + on the surface of TMA-capped CdTe. Moreover, the more amino group, benzene and thiol group equipped in the structure of amino acid, the stronger fluorescence restoring of CdTe could be achieved. This fluorescence spectrometry method for Ag + showed low detection of limit with the value of 13.16 nmol/L, with no response to other heavy metals, which demonstrating its high sensitivity and high selectivity for Ag + . More importantly, this paper-based sensor method combined with chemometrics could accurately identify and quantify different concentrations of Ag + in different complex matrices. This fast, economical, accurate and effective approach exhibited a new idea for the on-site detection of Ag + , and was expected to be extended to the on-site detection of Ag + in biological and environmental fields.
研究领域:
分析化学
·
环境科学
·
生物医学
✓ 已验证
DOI
高影响因子
Results in Physics
·
2016
·
IF 1.337
Chang Zhang,Lei Du,Cui Liu,Yunchuan Li,ZhenZhen Yang,Yuan-Cheng Cao
High photostable epoxy polymerized carbon quantum dots (C-dots) luminescent thin films were prepared and their performances were compared with the CdTe quantum dots (QDs). First, water soluble C-dots (λem = 543.60 nm) were synthesized. Poly (ethylene glycol) diglycidyl ether (PEG) and diaminooctane were used as the polymer matrix to make the epoxy resin films. FT-IR spectra showed that there were vibration at 3448 cm −1 and 1644 cm −1 which contributed to -OH and -NH respectively. SEM observations showed that the polymerizations of the films were uniform and there were no structure defects. Mechanical tests showed the tensile modulus of C-dots composite films were 4.6, 4.9, 6.4 and 7.8 MPa respectively with corresponding 0%, 1%, 2% and 5% mass fraction of C-dots, while the tensile modulus of CdTe QDs films were 4.6 MPa under the same mass fraction of CdTe QDs. Compared with semiconductor QDs, the decay of quantum yield were 5% and 10% for the C-dots and CdTe QDs, respectively. The pictures in the continuous irradiation of 48 h showed that the C-dots film was more photostable. This study provides much helpful and profound towards the fluorescent enhancement films in the field of flexible displays.
研究领域:
材料科学
·
光电技术
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2014
·Vol. 181
·期 11
·1393-1399
·
IF 3.719
Jiao Hangzhou,Zhang Ling,Liang Zhenhua,Peng Guihua,Lin Hengwei
We have synthesized water dispersible CdTe quantum dots (QDs) in different sizes and with various capping reagents, and have studied the effects of their size on the sensitivity and selectivity in the fluorometric determination of metal ions, particularly of silver(I). It is found that an increase in the particle size of homocysteine-capped CdTe QDs from 1.7 nm to 3.3 nm and to 3.7 nm enhances both the sensitivity and selectivity of the determination of Ag(I) to give an ultimate limit of detection as low as 8.3 nM. This effect can partially be explained by the better passivation of surface traps on smaller sized QDs via adsorption of Ag(I), thereby decreasing the apparent detection efficiency. In addition, the presence of CdS in the CdTe QDs is likely to play a role. The study demonstrates that an improvement in sensing performance is accomplished by using QDs of fine-tuned particle sizes. Such effects are likely also to occur with other QD-based optical probes.
Improvement of sensing performance by the use of quantum dots based fluorescent probes can be achieved through tuning their particle sizes and should be considered as an important factor in developing relevant probes.
研究领域:
分析化学
·
纳米生物学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）