Journal of Environmental Chemical Engineering
·
2025
·Vol. 13
·期 6
·120116
·
IF 7.2
Wujian Zhang,Yongchao Zhao,Jidong Wang,Kangjun Wang,Hangjia Shen,Zongjian Liu,Wenfeng Han,Ying Li,Aimin Chen,Haodong Tang
The dehydrofluorination of 1,1-difluoroethane (R152a) is a Lewis acid–catalyzed reaction in which both catalytic activity and stability are governed by the coordination and acidity of aluminum sites. In this work, a mechanochemical fluorination strategy was developed to construct a partially fluorinated Al-based catalyst with tunable acid properties. By controlling the fluorine-aluminum ratio during ball milling, the in situ formation of AlF 2 (OH) was achieved, serving as a structural stabilizer and electronic modulator. The coexistence of F-Al-O units and unsaturated Al centers provides medium-strength Lewis acid sites, which favor selective C-F bond activation while suppressing side reactions. Comprehensive characterizations (XRD, XPS, 27 Al NMR, and NH 3 -TPD) confirmed that the defect-related F-Al-O structure maintains structural integrity and balanced acidity during reaction. Consequently, the optimized catalyst exhibits excellent activity, selectivity, and long-term stability in R152a dehydrofluorination.
研究领域:
催化化学
·
材料化学
·
无机化学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Li-Qian Cheng,Xinyuan Xie,Kai Chen,Xuxia Hao,Min Jiang,Yanping Tang,Haijiao Xie,Zhaoyin Wen
The pursuit of high-power and prolonged service life lithium ion batteries has driven extensive research into novel anode materials. Titanium niobium oxide (TNO) has arisen as a prospective contender due to its high reaction potential and low strain performance, which effectively avoid side reactions and suppress the formation of lithium dendrite. However, challenges such as poor conductivity and structural instability during high-rate cycling have hindered their practical application. In this study, high-performance V5+ and F– codoping of the TiNb2O7 (V/F-TNO) anode is obtained by a facile solvothermal method and exhibits outstanding electrochemical properties in both liquid- and solid-state batteries. Under the synergistic effect of V5+ and F– doping, impurity bands and additional oxygen vacancies are introduced to enhance the conductivity, while the particle size is reduced, which significantly improves its rate performance. In addition, a more stable crystal structure improves its cycle life. Thereby, the V/F-TNO anode displays a high reversible capacity of 322.8 mAh g–1 at 0.1 C and a superior rate capability of 222.6 mAh g–1 at 20 C. During long-term cycles, the V/F-TNO anode presents an outstanding discharge capacity of 178.5 mAh g–1 after 1500 cycles at 10 C, equivalent to a capacity retention rate of 78.2%. LiFePO4 (LFP)|Li1.3Al0.3Ti1.7(PO4)3 composite polymer electrolyte (LATPCPEs)|V/F-TNO solid-state batteries (SSBs) are assembled and display ideal capacities of 129.3 mAh g–1 at 0.2 C and 83.5 mAh g–1 at 5 C. Moreover, they retain an extraordinary capacity of 101.7 mAh g–1 after 200 cycles at 0.5 C, corresponding to a high-capacity retention ratio of 86%. This study demonstrates that the V/F-TNO anode is a promising candidate for high-power liquid and solid-state batteries.
研究领域:
材料科学
·
电化学
·
储能
·
电池技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DYES AND PIGMENTS
·
2017
·
IF 3.473
H.C. Ma,Z.M. Yang,H.Y. Cao,L. Lei,Z.Q. Lei
The development of CO 2 -active fluorescent sensors is paramount to the climate assessment. And also, because of the biological and environmental importance, trace detection F − is a great challenge task but very necessary for human daily life. This paper presented a water-soluble fluorescent sensor fabricated by triphenylamine derivative of NBTA 3− and quaternary ammonium salt (CTAC), which was further explored as a green and multi-functional sensing platform, and demonstrated excellent CO 2 response ability and trace amount of F − recognition with obvious visualized exhibitions. Especially, our research result has potential application in the CO 2 sensing by contact and vapor modes. Both of techniques exhibited reliable and sensitive and quick CO 2 sensing capability. We hope our research result is of real-time monitoring CO 2 in our surroundings.
研究领域:
分析化学
·
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Kai Yang,Junhao Wang,Dian Yu,Pengqiuyue Pu,Hang Li,Zihao Chen,Yangyang Tang,Zhao Fang
As mineral resources are developed and exploited, the proportion of low-grade zinc ore increases. The concentrations of F - exceeding the optimal range may pose a risk to zinc hydrometallurgy . In the present research, Al 2 O 3 -ZnO microspheres (AZO) characterized by a substantial specific surface area were synthesized through a hydrothermal-roasting technique and applied in industrial zinc sulphate fluoride removal. The optimal adsorption conditions for AZO and the underlying adsorption mechanism were investigated. The results indicated that the adsorption at 12 g·L -1 dosage, original pH=5.32 of the solution and 323 K for 75 min, when the fluoride concentration was reduced to below 50 mg·L -1 , the fluoride removal percentage reached 73.32 %, and the adsorption capacity was 8.55 mg·g -1 . Kinetic studies revealed that AZO exhibited surface inhomogeneity, functioning as a heterogeneous adsorbent, with the fluoride adsorption process being predominantly chemical in nature. The isotherm model suggested that the removal process was characterized by homogeneous adsorption of a monomolecular layer, with a theoretical maximum adsorption capacity of AZO estimated at 9.479 mg·g -1 . FT-IR and XPS analyses demonstrated that the defluorination process occurs through ion exchange between F - and -OH, as well as the formation of Zn/Al-F complexes. Consequently, AZO present a novel approach for developing an effective adsorbent for defluorination in industrial ZnSO 4 solutions.
研究领域:
环境化学
·
湿法冶金
·
材料科学
·
吸附技术
·
废水处理
✓ 已验证
产品关联
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2025
·
IF 6.4
Tian-Tian He,Chun-Li Hu,Ya-Ping Gong,Jiang-Gao Mao,Fang Kong
In this work, we present a targeted design strategy that combines Group IIIA metal cation and fluorine anion to simultaneously enhance the band gap and birefringence in selenite-based system. Three new ultraviolet (UV) transparent selenite fluorides, SrAl(SeO3)F3 (1), BaAl(SeO3)F3(H2O)0.25 (2), and ZnGa(SeO3)2F (3), were successfully synthesized under mild hydrothermal conditions. Remarkably, all three compounds exhibit wide band gaps as well as large birefringence. In particular, ZnGa(SeO3)2F (3) demonstrates a pronounced birefringence value of 0.176 at 546 nm, representing the highest birefringence reported among all known selenites with a band gap above 5.0 eV. Theoretical investigations indicate that the strong optical anisotropy is predominantly attributed to the stereochemically active lone-pair electrons of Se(IV) cations. The [Zn2O8] dimers and the infinite [GaO4F]∞ chains in ZnGa(SeO3)2F (3) crucially facilitate the optimal spatial arrangement of [SeO3] groups. This study expands the structural diversity of selenite fluorides and provides an effective pathway for designing high-performance birefringent crystals suitable for UV applications.
✓ 已验证
产品关联
DOI
高影响因子
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY
·
2020
·Vol. 68
·期 6
·1192-1201
·
IF 1.638
Lingqiang Meng,Jianmin Dai,Shengzhong Rong,Hongmin Gao,Ze Zhang,Yingcong Zhang,Dong Chang,Hongzhi Pan
In our work, one-step electro-deposition method was adopted to produce polyaniline (PANI) and functional multiwalled carbon nanotubes (f-MWCNTs) films on glass carbon electrodes, and the modified electrodes were applied as an electrochemical sensor for determination of 10-hydroxycamptothecine (10-HCPT). The f-MWCNTs were handled by ultrasound processing in concentrated oxidizing acid solution, which can obtain a wonderful dissolution in water and attach new functional groups, such as –COOH and –OH. Then, aniline monomer could polymerize on the surface easily. The surface characterization was investigated using various techniques including scanning electron microscope, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction, and electro-catalytic properties were characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Under optimal conditions, the resulting of PANI/f-MWCNTs sensor showed a wide linear range (3 × 10 −9 to 7 × 10 −7 mol L −1 ) and a low detection limit (1 10 −9 mol L −1 ), which is attributing to its large special surface area and good conductivity. Moreover, the modified electrodes are convenient to fabricate, which can be used to detect 10-HCPT in urine samples successfully.
研究领域:
材料科学
·
分析化学
·
生物医学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 11
·6053-6062
·
IF 2.936
Tian-Ying Luo,Xi He,Ji Zhang,Ping Chen,Yan-Hong Liu,Hai-Jiao Wang,Xiao-Qi Yu
Carbon dots (CDs) are photoluminescent nanoparticles with distinctive properties, having great potential in nano-biomaterial systems such as gene/drug delivery vectors and cell imaging agents. Fluorine-doped CD C-6F was prepared by a one-step ring-opening polymerization-dehydrative carbonization (RPDC) approach based on low molecular weight polyethyleneimine (PEI, 600 Da) and fluorinated diglycidyl ethers, while the non-fluorinated counterpart C-6H and the CD prepared from PEI 600 Da solely (C-600) were also prepared for comparison. TEM, FT-IR and XPS were performed to determine the compositions and surface states of the CDs. In vitro cell experiment results reveal that the CDs prepared from RPDC approach have much higher transfection efficiency and cellular uptake than PEI 600 contrasts in various cell lines. Compared to non-fluorinated C-6H, C-6F exhibited distinctly higher transfection efficiency, and up to 30 and 260 times higher efficiency than PEI 25 kDa could be achieved in the absence and presence of serum, respectively, indicating the advantage of F-doping. Besides, these CDs exhibit good cell imaging capability under single wavelength excitation, making the materials suitable for cellular tracking and transfection mechanism studies. These results demonstrate that fluorine-doping is an efficient approach to obtained CD gene vectors with high efficiency and serum tolerance.
研究领域:
生物材料
·
纳米医学
·
细胞生物学
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2018
·
IF 8.097
Peng Wei,Yanxiang Liu,Yarui Su,Ling Miao,Yangyang Huang,Yi Liu,Yuegang Qiu,Yuyu Li,Xiaoyu Zhang,Yue Xu,Xueping Sun,Chun Fang,Qing Li,Jiantao Han,Yunhui Huang
We are presenting a sol–gel method for building novel nanostructures made of nanosized F-doped Na1–2xTi2(PO4)3–xFx (NTP-Fx, x = 0, 0.02, 0.05, and 0.10) particles embedded in three-dimensional (3D) carbon matrices (NTP-Fx/C). This technique combines advantages of both zero-dimensional materials and 3D-carbon networks. Proper fluorine doping stabilizes the NTP structure and greatly enhances ion/electron transportation, leading to superhigh-rate electrochemical performance and ultralong cycle life. The composite electrode delivers high specific capacities of 121, 115, 112.2, 110.1, 107.7, 103.1, 85.8, and 62.5 mA h g–1 at 0.2, 0.5, 1, 2, 5, 10, 20, and 30 C, respectively. It retains an unbelievable ∼70% capacity after a thousand cycles at a rate as high as 10 C. Electroanalytical results reveal that fluorine doping significantly enhances Na+ diffusion kinetics. Meanwhile, density functional theory calculations demonstrate F-doped NTPs’ own outstanding electrochemical properties, which is due to the enhanced intrinsic ionic/electronic conductivity. The results show that anion doping is an efficient way to make high-performance NTP anodes for sodium-ion batteries.
研究领域:
电化学
·
材料科学
·
能源存储
·
纳米材料
·
固态化学
·
电化学储能
✓ 已验证
DOI
高影响因子
Canadian Journal of Chemistry
·
2025
·
IF 1
Xin Guo,Pai Chen,Rui Wang,Ruijing Sun,Wei Jian,Yang Zhang,Yongsheng Bao,Shuai Wang
Most areas have long been affected by endemic fluorosis, which can lead to fluorosis bone disease and cardiovascular damage. The detection and treatment of fluoridated water has been of great concern. In this work, the sensors SP-1 and SP-2 were synthesized from naphthylamine and pyreneamine with carboxy-modified spiropyran via amidation reaction. The photoisomerization of spiropyran molecules under alternating ultraviolet/visible light irradiation resulted in changes in the conjugation system, which amplifies the combination between F− and the amide bonds of SP-1 and SP-2 molecules, enabling rapid and naked-eye detection of F−. Simultaneously, the impact of two distinct conjugated rings, pyridineamine and naphthaleneamine, on spiropyran detection of F− was investigated. Based on results from the UV spectrum, 1HNMR, and DFT theoretical calculation, it was determined that both sensor SP-1 and SP-2 can detect F− with a binding ratio of 1:1. The detection limits for sensor SP-1 are 0.978 µM for F−, and SP-2 are 0.173 µM for F−. The detection limit of SP-2, with a larger chromophore than SP-1, is lower and exhibits a more pronounced phenomenon. This study holds significant practical implications for rapid anion detection in aqueous environments, visual recognition without the need for specialized equipment, and energy conservation.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 46
·期 13
·21560-21568
·
IF 3.83
Mingcai Li,Xuejie Zhang,Yinjian Zheng,Yaliang Xu,Haoran Zhang,Yingliang Liu,Bingfu Lei
The discovery of light converter excited by near-ultraviolet (UV) superior broadband blue-emitting lighting source is a main challenge in plant growth LEDs. In this study, SrLu 2 O 4 :Ce 3+ , Li + , F − blue phosphor has been synthesized via a solid-state reaction. Benefitting from doping of F − ions, SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor (λ ex = 405 nm, λ em = 460 nm) shows a strong broadband (FWHM = 90 nm) blue-emitting with lower critical concentration of Ce 3+ ions and an increasing 6.9% thermal quenching performance (92.1% @ 423 K of the peak intensity at room temperature). Moreover, a blue light converter composed of SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor and glass matrix is obtained based on phosphor-in-glass (PiG) technology, exhibiting excellent thermal stability and outstanding moisture resistance . A red light converter with commercial red phosphor is obtained by the same method. Furthermore, by combining of two light converters with near-UV chip, a proof-of-concept plant growth high power LED is achieved and applied in indoor Italian lettuce growing in comparison with commercial plant lamps.
研究领域:
材料科学
·
光学工程
·
农业光电子学
·
固体发光
·
无机非金属材料
✓ 已验证
DOI
高影响因子
Functional Materials Letters
·
2024
·
IF 1.2
Zhuqing Sun,Yongxia Li,Haowen Bai,Shenghang Jin,Haibo Zhang,Guanying Cao
All inorganic lead halide cesium perovskite quantum dots (QDs) have attracted much attention due to their excellent luminescence properties, but further development is restricted by their stability and the existence of toxic element lead. In this paper, F/Mn-doped CsPb ( Br / Cl ) 3 QDs glass was prepared by melt quenching and heat treatment, with reduced Pb content effectively. The result shows that the spectrum of the QD glass is adjustable between 450 nm and 515.4 nm by changing the feeding ratio of Mn-Pb ion and heat treatment temperature. Moreover, the indraught of Mn 2 + effectively improves the PLQY of CsPb ( Br / Cl ) 3 QDs glass and serves as a red-emitting. The prepared composites not only maintain good fluorescence characteristics, but also greatly improve the stability of QDs. And successfully coupled with blue LED chips to synthesize WLED, Under 20 mA current, the color coordinate is (0.3446, 0.3389).
研究领域:
材料科学
·
纳米技术
·
光电子学
·
固体物理
·
无机化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2026
·
IF 4.9
Qiang Zhao,Zhi Shen,Lin-Xi Qin,Meng-Ting Fan,Pei-Xuan Zhang,Xin-Yue Zhang
Complex 1 and 2 exhibit excellent red and green fluorescence, respectively. • Complexes 1 and 2 exhibit excellent selectivity towards Fe 3+ . • Complex 1 and 2 have good recognition of I - and F - in anions, respectively. • Complex 2 can achieve naked eye recognition of F - . To further advance research on rare earth complexes as Luminescent probes, this work investigates the cation and anion recognition capabilities of europium and terbium carboxylate complexes, Eu(ocpia) ( 1 ) and Tb(ocpia) ( 2 ), in dispersed systems. Cation recognition experiments were performed using DMF as the dispersion medium, with the complex concentration fixed at 0.2 mg/mL. Results demonstrate that both complexes 1 and 2 exhibit excellent selectivity for Fe³⁺, with detection limits as low as 0.076 μM and 0.069 μM, respectively. These findings indicate that complexes 1 and 2 hold great potential as fluorescent probes for Fe³⁺ detection. Anion recognition experiments were conducted in acetonitrile dispersion (0.2 mg/mL complex concentration). Complex 1 shows high selectivity for I⁻, achieving a detection limit of 0.052 μM. In contrast, complex 2 displays strong affinity for F⁻, with a detection limit of 0.087 μM. Notably, F⁻ can coordinate with complex 2 to form a soluble adduct, enabling visual, naked-eye recognition of F⁻. Collectively, these results highlight the promising application of complexes 1 and 2 as selective fluorescent probes for I⁻ and F⁻, respectively. Eu and Tb complexes exhibit excellent red and green fluorescence, respectively, and both have excellent recognition for Fe 3+ . Tb complex can experimentally recognize F - with naked eyes Download: Download high-res image (228KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）