CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Changcheng Sun,Lyumeng Ye,Peng Lu,Xianhui Yan,Jianhang Huang,Zhixiong Tang,Dongyao Chen,Chaoping Cen
The key point to broaden the operating temperature window for synergistic control of NO x and oxygenated volatile organic compounds (OVOCs) with high NO x /VOCs conversion and N 2 /CO 2 selectivity relies on development of appropriate catalysts. Herein, a silver-modified Mn/HZSM-5 catalyst was designed, which achieved an effective NO x and acetone co-removal activity and maintained over 90 % N 2 /CO 2 selectivity at a broad temperature range from 293 to 400 °C. The excellent performance of MnAg/HZSM-5 was due to large surface area, plenty of oxygen vacancies and Lewis acid sites, as well as outstanding oxygen mobility and reducibility that derived from the interactions between Mn 4+ /Mn 3+ and Ag + /Ag 0 . NO x reduction followed both Eley-Rideal and Langmuir-Hinshelwood mechanisms, while acetone hardly replaced NH 3 as a reduction agent. Acetone oxidation underwent acetone → acetate → formate → carbonate → CO 2 and H 2 O following a Mars-van Krevelen mechanism. NH 3 participated in acetone oxidation, forming amide and nitrile species, which caused catalyst deactivation and secondary pollution.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Shuangjie Xu,Huan Zheng,Chongqi Wang,Kaifeng Li,Xinyue Xu,Hongmeng Zhang,Yanda Ji,Lei Qiu,Hao Yang
Real-time impact monitoring is essential to ensure the safe service and efficient operation of the aircraft structure. By embedding the piezoelectric sensor array within the structure and applying appropriate signal processing algorithms, the impact position can be precisely localized, enabling real-time monitoring of the aircraft structure. With the development of supersonic aircraft, the fuselage skin of the aircraft is often exposed to high temperatures and other harsh environments during flight. However, the relatively low operating temperature significantly limits the application of traditional piezoelectric sensor arrays in high-temperature impact monitoring. The Mn-doped BiFeO 3 -BaTiO 3 ceramics exhibit excellent piezoelectric properties and high Curie temperature ( T c ), making them promising for high-temperature impact monitoring of the supersonic aircraft. In the present work, we fabricated a sensor array based on 0.7BiFeO 3 -0.3BaTiO 3 -0.25 %molMnO 2 (73BFBT-Mn) ceramic, which demonstrates a T c of 478 °C and a piezoelectric charge constant ( d 33 ) of 125 pC/N at room temperature. Significantly, the 73BFBT-Mn ceramic sensor array maintains a good impact localization accuracy from 25 °C to 200 °C combined with the improved path imaging algorithm. This is attributed to the construction of virtual paths within the sensor array and the extraction of impact signal features, which represent the major improvement compared to traditional path imaging algorithms. The 73BFBT-Mn ceramic sensor array exhibits significant prospects for high-temperature impact monitoring, particularly in the monitoring of supersonic aircraft fuselage skins.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
Kang Wang,Chao Fan,Ruihang Hu,Chen Sun,Yan-Qin Wang
During conventional water electrolysis for hydrogen production, the high theoretical potential of the oxygen evolution reaction (OER) leads to excessive energy consumption. In contrast, the urea oxidation reaction (UOR), with its significantly lower theoretical potential, has attracted considerable attention as an energy-efficient alternative for hydrogen production. In this study, we develop a Ni-doped Mn MOF-74 catalyst Ni-Mn MOF-74 supported on carbon cloth (CC), exhibiting a unique bud-like architecture featuring a petal-surrounded pistil morphology, which exhibits excellent UOR performance in alkaline medium. This catalyst achieves a current density of 100 mA cm-2 at an ultralow potential of 1.40 V (vs. RHE) in 1.0 M KOH + 0.5 M urea electrolyte while maintaining remarkable stability. Importantly, in a urea-assisted hydrogen production electrolyzer composed of Ni-Mn MOF-74 (anode) and Pt/C (cathode), the system delivers a current density of 100 mA cm⁻² at a cell voltage of only 1.49 V in alkaline freshwater and 1.50 V in alkaline seawater, respectively, while remaining excellent stability. The enhanced UOR activity stems from Ni doping, which effectively modulates the catalyst's morphology and electronic structure, the synergism of Ni and Mn strengthening the adsorption of urea molecule and OH- ion, thereby accelerating urea decomposition kinetics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2025
·
IF 4.2
Xinli Wu,Weichao Qi,Hong Zhu,Yuhui Dong,Aocheng Jiang,Huanyang Chen,Hongtan Huang,Lu Han,Yousheng Zou
CsPbX 3 (X = Cl, Br, I) perovskites have been recognized as ideal candidates for light-emitting device applications due to their excellent optoelectronic properties, but the toxicity of lead has raised significant environmental concerns. Mn doping in lead-based perovskite nanocrystals (NCs) has been conducted to mitigate lead toxicity risks while enhancing photoluminescent performance. While high Mn concentrations can increase Mn–Mn defect states, complicating the balance between high photoluminescence quantum yield (PLQY) and low lead. In this study, a PLQY of 85.8% was achieved by precisely controlling the Mn/Pb feed ratio at a concentration of 11.37%. The enhancement in PLQY is attributed to reduced Cl vacancies, which lower defect states and non-radiative recombination rates. Stability was also improved through doping, and white light emitting diode (WLED) utilizing these materials exhibited color coordinates (0.3379, 0.3479) that closely approximate standard white light emission. This work provides a solution for achieving high-quality Mn 2+ doped perovskite NCs, and highlights its potential in solid-state lighting solutions while addressing lead toxicity concerns.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 43
·26930-26934
·
IF 3.108
Wei Liu,Huanhuan Li,Yanli Wei,Chuan Dong
A label free phosphorescence sensing platform for trypsin was developed employing Mn doped ZnS quantum dots (Mn-ZnS QDs) as the phosphorescence probe. Mn-ZnS QDs can emit strong room temperature phosphorescence. Upon addition of Cytochrome c (Cyt c), a hybrid complex between Mn-ZnS QDs and Cyt c was formed, and consequently, quenched the phosphorescence of Mn-ZnS QDs. In the presence of trypsin, Cyt c was hydrolyzed into small fragments, and accordingly, the quenched phosphorescence of Mn-ZnS QDs went back and high phosphorescence intensity was observed. As such, based on the phosphorescence signal changes of the system, a label free turn-on phosphorescence sensing platform was fabricated. Factors affecting the determination of trypsin including the concentration of Mn-ZnS QDs, reaction time, temperature and pH effect were comprehensively explored. Under the optimal experimental conditions the restored phosphorescence of the sensing system displayed a response for trypsin in the range of 0.88–15.6 μg mL−1 with a detection limit of 42 ng mL−1. Additionally, the sensing platform was successfully applied for the determination of trypsin in human serum samples with satisfactory recovery.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Boyang Shao,Yanlin Zhu,Yaqian Du,Dan Yang,Shili Gai,Fei He,Piaoping Yang
As an emerging technology, nanocatalytic medicine attracts much attention, especially the ones according to the enzymatic reaction by using excess H 2 O 2 in the tumor. Among various candidates, single-atom catalyst (SAC) revealed unique and outstanding redox reaction performance, since the active sites consisting of single metal atoms may achieve the maximum utilization of metal atoms and emerge obviously amplified reaction rate. Here we developed an M−N x (M = Mn, Zn) center-based SAC with a hollow structure by calcination of Mn 2+ -doped zeolitic imidazolate frameworks (ZIF-8), and PEGylation was applied to improve the hydrophilicity. According to the enzymatic reaction, the M−N x (M = Mn, Zn) centers have an inherent peroxidase-like activity to catalyze over-expressed H 2 O 2 in the weak acidic tumor microenvironment and generate a large amount of toxic reactive oxygen species (ROS) like hydroxyl radicals for therapy. To keep efficient therapeutic output, we integrated the hollow SAC with Au which could expend the glucose in tumor and supply H 2 O 2 as the substrate of peroxidase-like activity. Better yet, Au may boost the photothermal effect of SAC and offer another non-invasive photothermal therapy (PTT) to promote the effect of tumor removal. This platform provided a new idea for the construction of more efficient peroxidase-like activity in tumor therapy.
✓ 已验证
DOI
PubMed
高影响因子
NANOTECHNOLOGY
·
2022
·Vol. 33
·期 48
·485403
·
IF 3.953
Martine Otay Lifoka,Weixing Niu,Guihua Liu,Changcheng Wu,Jingde Li
Non-precious and stable electrocatalysts towards both oxygen and hydrogen evolution reaction (OER/HER) are essential for effective overall water splitting in alkaline solution. In this study, a sulfur defective and manganese-doped nickel sulfide nanosheet that uniformly grown on nickel foam substrate (Mn–Ni3S2–x@NF) is synthesized. In alkaline solution, the Mn–Ni3S2–x@NF showed a low overpotential of 76 and 110 mV for OER and HER at 10 mA cm−2, respectively, together exhibiting excellent stability for both OER and HER reaction. It was confirmed by the experimental results that sulfur defects and Mn-doping synergistically optimized the electronic structure of Mn–Ni3S2–x with increased electrical conductivity and enhanced OER/HER activity. Moreover, amorphous nickel oxyhydroxide (NiOOH) was observed by in situ Raman during the OER condition, suggesting NiOOH is the active phase for OER reaction. Furthermore, the electrolyzer assembled by Mn–Ni3S2–x@NF merely needs 1.46 V to reach 10 mA cm−2 and shows good stability as well. This study provides a feasible way to prepare high-efficiency bifunctional catalysts for overall water splitting.
✓ 已验证
DOI
高影响因子
Advanced Materials Interfaces
·
2021
·Vol. 8
·期 7
·2002175
·
IF 6.147
Lu Hou,Yihua Zhu,Jingrun Zhu,Xuyan Li,Feng Zeng,Tingyu Yang,Yiqin Gong,Jianhua Shen,Chunzhong Li
Mn-doped 2D perovskites are emerging as good candidates for light-emitting applications due to their excellent optical and electrical properties. Major synthetic routes, solid-state grinding and high-temperature solution synthesis, are extensively studied to prepare Mn-doped 2D perovskites. However, complicated synthesis, small-scale yields, and poor-stability impede their widespread applications. Herein, a one-step acid-solution-assisted method is exhibited for gram-scale production of Mn-doped 2D (C 8 H 17 NH 2 ) 2 PbBr 4 with a solid yield of 1.35 g products out of 3 mL solvent. After Mn-doped 2D (C 8 H 17 NH 2 ) 2 PbBr 4 being stored in the air for 90 days, the photoluminescence (PL) quantum yield of powders has minor changes, showing good stability. Phosphor-converted monochrome light-emitting diodes (LEDs) are fabricated. After the LEDs work 6 h under a voltage of 3 V, their PL spectra have no obvious change, showing a great potential in optoelectronic devices. This study provides a new effective strategy for large-scale synthesis of ultrastable Mn-doped 2D perovskites, which is expected to provide inspiration for the industrial optoelectronic applications of perovskites.
✓ 已验证
DOI
高影响因子
AIP Advances
·
2022
·Vol. 12
·期 3
·
IF 1.697
Wu Yao,Kong Lingce,Zhang Xiuling,Guo Yueting,Sun Yaxin,Zhao Chonglin,Chen Wenming,Zuo Yanjun,Li Congju
Protection against harmful chemical compounds is a major social concern, especially chemical warfare agents (CWAs) that are easy to synthesize and can cause mass casualties. The metal oxides with large surface area, porous structures, and a large number of active sites have shown outstanding performance for the adsorption and decontamination of CWAs. However, single-component metal oxides show a lower degradation rate for chemical warfare agents. Here, we demonstrate a convenient homogeneous hydrolysis method for the synthesis of mesoporous manganese-based multi-component metal oxides. Our strategy enables Ce or/and Zr to be doped into the δ-MnO 2 structure during the forming process, remarkably enlarging the surface area and providing rich active sites for CWA catalysis. The as-synthesized multi-component metal oxides exhibit excellent performance for the CWA degradation. It is surprising to find that the best degree of removal of mustard gas (HD), soman (GD), and the VX nerve agent (VX) is 90.60%, 87.32%, and 100%, respectively, reaction with multi-component samples in 4 h, 2.92-fold increase to HD, 8.28-fold increase to GD, and 1.67-fold increase to VX contrast with undoped δ-MnO 2 . This work may provide an avenue for developing new generation chemical warfare agent decontamination materials and other catalysts.
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2023
·Vol. 12
·期 11
·2302434
·
IF 9
Zhi-Zhong Zhang,Zi-Lin He,Jian-Bin Luo,Jun-Hua Wei,Xiu-Xian Guo,Jing-Hua Chen,Dai-Bin Kuang
The current mainstream planar X-ray imaging techniques face significant challenges for accurately capturing the internal structure of curved objects, since the variable distances between the curved objects and the flat-panel scintillation screen cannot eliminate the distortion in X-ray imaging. Though large-area and transparent curved scintillation screens are much more desirable. Here, organic–inorganic hybrid Mn-based single crystals ([CH 3 Ph 3 P] 2 MnX 4 , X = Cl, Br, I) exhibiting high photoluminescence quantum yield (PLQY) and low melting temperature have been employed to prepare transparent glass for X-ray scintillation imaging application through a low-temperature melting strategy. The [CH 3 Ph 3 P] 2 MnBr 4 -glass shows high PLQY (47.8%), high-resolution X-ray imaging performance (12.3 lp mm −1 ), low limit of detection (25.33 nGy s −1 ), and impressive X-ray irradiation stability (102 Gy). Furthermore, high-contrast X-ray imaging at a low dose (6.865 µGy per exposure, 14.5 times lower than the chest radiograph) is achieved. Based on the low glass transition temperature ( T g = 53.6 °C) and easy-shapeable properties of [CH 3 Ph 3 P] 2 MnBr 4 -glass scintillator, the large-area curved scintillation screen with a series of sizes of Φ 2×4 – Φ 8×4 cm 2 can be easily fabricated and show high X-ray imaging quality. These findings provide a paradigm for future research in shapeable X-ray scintillators, unlocking new possibilities for curved and 3D X-ray imaging.
✓ 已验证
DOI
高影响因子
Materials Today Chemistry
·
2022
·
IF 7.613
X. Zhou,M.-H. Zhao,J. Yang,Y. Han,L. Cao,Y.-Y. Han,J. Wang,Y. Wang,M.-R. Li
Environment-friendly and cost-effective versatile yellow-green inorganic pigments are technically significant for natural camouflage but rare. Here, we adopt site-selective parent-doping of Mn–Li into the octahedral Ca-site (Ca B ) of Ca 3 TeO 6 to deliver vivid greenish pigments by the unprecedented yellow-green Mn 4+ O 6 chromophore, yielding tunable pigments resemble to seasonal leaves. The camouflage color zone of these pigments are remarkably enlarged by chemical pressure via Mg 2+ /Sr 2+ -substitution for the A -site Ca (Ca A ). The locally anisotropic and positive chemical pressure on chromophore group is scaled to be around +14.4/+23.3 GPa, as estimated from the accompanied geometric evolution of Mn 4+ O 6 . The achieved pigments also demonstrate excellent chemical and thermodynamic stability and high (60–80%) near infrared reflectivity in 1500–2500 nm, showing potential applications for natural camouflage and yellow-green “cool pigments”. These findings built a bridge between chemical and equivalently physical pressure, and nominated a way to estimate the overall and local strain/pressure by optical descriptor.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2023
·Vol. 13
·期 49
·34524-34533
·
IF 3.9
Suo Zhao,Qiao Wang,Jin Liu,Xianglong Hao,Xiao Liu,Wenfei Shen,Zhonglin Du,Yao Wang,Mikhail Artemyev,Jianguo Tang
In this study, ZnS capped Cu–In–S (ZCIS) quantum dots doped with Mn ions are synthesized by a thermal injection method, with luminescence covering almost the entire visible area. The large Stokes shift effectively inhibits the self-absorption effect under luminescence, and the quantum yield of ZCIS quantum dots increased from 38% to 50% after ZnS capping and further to 69% after doping with Mn. First, red-, yellow-, and blue-emitting quantum dots were synthesized and then, polychromatic ensembles were obtained by mixing the trichromatic quantum dots in a different ratio. Using the home-built inkjet printer, multilayered and multicolor mixed patterns were obtained for information pattern storage and multilayer pattern recognition and reading.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）