CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2021
·Vol. 38
·期 4
·1005-1011
·
IF 1.307
Sun Bolun,Chao Danming,Wang Ce
Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Qing Yi,Sheng Lu,Yutong Fan,Dehua Cheng,Xumei Wang,Shaoling Cheng,Hongxiang Xie
Wastewater treatment is a huge problem facing human beings. The development of recyclable and efficient adsorption materials is of great benefit to solve the problem. Based on the biodegradable cellulose nanofibers (CNFs) derived from biomass resources , the large sized CNFs/PVA composite hydrogel spheres (CV-HSs, 1–3 mm) were successfully prepared by the inverse suspension pellet-forming technology using the polymers as raw materials, and another hydrophobic CNFs/PVA composite aerogel spheres (HCV-ASs) were also obtained by lyophilization and followed silylation of as-prepared CV-HSs. The CV-HSs showed excellent adsorption properties for simulated pollutants, including Cu 2+ , phenol and aniline in water. The maximum absorption capacity of CV-HSs was 17.22 mmol/g for Cu 2+ , 176.72 mg/g for phenol and 341.93 mg/g for aniline respectively. The HCV-ASs exhibited good absorption properties for weak polar organic solvents , such as petroleum ether, ethyl acetate and toluene. In summary, two kinds of large-sized CNFs/PVA composite gel spheres were successfully fabricated, and exhibited good adsorption properties for organic pollutants and heavy metal ions , indicating their potential for wastewater treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Guihua Yan,Shuaiming He,Gaofeng Chen,Xing Tang,Yong Sun,Feng Xu,Xianhai Zeng,Lu Lin
Recently, great efforts have been devoted to developing conductive adhesive hydrogels to meet the needs of various applications. However, grand challenges remain in achieving anisotropic hydrogels simultaneously featuring multiple properties using natural polymers and renewable resources. Here, a cellulose-based conductive hydrogel with strong, ultrastretchable, and adhesive properties is prepared via a simple magnetic field-induced strategy. This strategy involves the formation of a suspension mixture with well-oriented cellulose-polydopamine nanocomposites under magnetic fields, followed by rapid orientation via covalent crosslinking. The tensile strength of the oriented hydrogel in longitudinal direction is ~0.22 MPa, which is ~1.4 times higher than that in radial direction. Moreover, the hydrogel shows good cyclic loading-unloading ability, high conductivity (6.9 ± 0.6 S m −1 ), and strong adhesion (71 kPa). The hydrogel also shows significant anisotropic properties and made it a versatile platform for wearable sensors to monitor large and subtle human motion in the foreseeable future.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2021
·
IF 5.645
Huimin Zhang,Guangrui Zhang,Hanqi Zhu,Fumei Wang,Guangbiao Xu,Hua Shen,Jilong Wang
An efficient and economic kapok/cellulose aerogel for waste oil treatment was successfully fabricated via simple freeze-drying and surface modification. To investigate their oil absorption performance, various aerogels by multi-scale cellulose and different lengths of kapok fibers were characterized. The use of cellulose nanofibers (CNF) enabled aerogels to possess remarkably uniform pore size and structural integrity, while the introduction of kapok improved their mechanical property, oil absorption and retention performance. For kapok/microfibrillated cellulose (MFC) aerogels, an excessively enlarged porous structure caused by long fibers would damage the structural stability of aerogels and reduce their oil absorption capability. Compared with the sheet-like structure formed by self-aggregated MFC, filamentous CNF exhibited better entanglement characteristics and possessed a more positive impact on enhancing the structural integrity and mechanical properties of aerogels. These aerogels presented ultra-low density (4.9 mg/cm 3 ), desirable hydrophobicity (147.6°), outstanding oil absorption (141.9 g/g) and retention (97.7 %) capacity, and excellent selective sorption property, making them ideal absorbents for oil spill cleaning.
✓ 已验证
产品关联
DOI
高影响因子
Royal Society Open Science
·
2021
·Vol. 8
·期 8
·
IF 2.963
Lanxin Lu,Min Liu,Ying Chen,Ying Luo
The non-toxic and completely biodegradable cellulose within bamboo is one of the most abundant agricultural polysaccharide wastes worldwide, and can be processed into cellulose nanofibres (CNFs). Iron(III)-loaded CNFs (Fe(III)@CNFs) derived from bamboo were prepared to improve the adsorption of tetracycline (TC), chlortetracycline (CTC) and oxytetracycline (OTC) from an aqueous solution. The preparation conditions of Fe(III)@CNFs suitable for the simultaneous adsorption of three tetracycline antibiotics (TCs) were investigated. Various analyses proved the abundance of oxygen-containing functional groups and the existence of Fe(III) active metal sites in Fe(III)@CNFs. In batch experiments, Fe(III)@CNFs were applied under a wide pH range and the maximum adsorption capacities were 294.12, 232.56 and 500.00 mg g−1 (for TC, CTC and OTC, respectively). In addition, different concentrations and types of coexisting anions have a weak effect on TCs adsorption. The original TCs adsorption capacities of Fe(III)@CNFs remained stable (greater than 92%) after five cycles when UV + H2O2 was used as the regeneration method. Four adsorption mechanisms (surface complexation, hydrogen bonding, electrostatic interaction and van der Waals force) were obtained for the endothermic adsorption of TCs, among which surface complexation between Fe(III) and TCs always dominates. The practically applicable Fe(III)@CNFs adsorbents are promising for TCs enrichment and remediation in engineering applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Jingsong Cao,Xiaodan Wu,Litao Wang,Guansong Shao,Bingyang Qin,Zihan Wang,Tao Wang,Yujie Fu
A microcrystalline cellulose-based temperature sensitivity paclitaxel molecular imprinted hydrogel (MCC-TSMIHs-PTX) was successfully prepared by temperature-sensitive monomer N-isopropylacrylamide, functional monomer 4-vinylpyridine, cross-linking agent N , N ′-methylenebisacrylamide and microcrystalline cellulose . They showed imprinting effective responses to the temperature changes. The results of adsorption kinetics , adsorption equilibrium, thermodynamics, selectivity and reusability showed the successful formation of a grafting thermosensitivity hydrogel with higher adsorption capacity and specific recognition. When the temperature reached 308 K, imprinting effect of hydrogel cavities would be most effective and conducive to capture template molecules. When the temperature reached 288 K, the lowest imprinting effect would facilitate the desorption of PTX. Finally, the MCC-TSMIHs-PTX was applied to enrich the paclitaxel in Taxus × media extracts samples, the relative contents of PTX in the samples were increased greatly from 7.23% to 78.32%, indicating the MCC-TSMIHs-PTX was a stable adsorption capacity for efficient separation and enrichment of PTX in Taxus × media extracts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOMACROMOLECULES
·
2021
·
IF 6.988
Yajie Zhong,Farzad Seidi,Chengcheng Li,Zhangmin Wan,Yongcan Jin,Junlong Song,Huining Xiao
Hydrogels as a wound dressing, integrated with ultrastretchability, rapid self-healing, and excellent antimicrobial activity, are in high demand, particularly for joint skin wound healing. Herein, a multifunctional and ductile composite hydrogel was developed using poly(vinyl alcohol) (PVA)-borax gel as a matrix that was synergized or dual-reinforced with dopamine-grafted oxidized carboxymethyl cellulose (OCMC-DA) and cellulose nanofibers (CNF). Moreover, neomycin (NEO), an aminoglycoside antibiotic with multifunctional groups, was incorporated into the hydrogel network as both an antibacterial agent and a cross-linker. The dynamic reversible borate ester linkages and hydrogen bonds between OCMC-DA, PVA, and CNF, along with dynamic cross-linking imine linkages between NEO and OCMC-DA, endowed the hydrogel with excellent self-healing ability and stretchability (3300%). The as-reinforced networks enhanced the mechanical properties of hydrogels significantly. More remarkably, the composite hydrogel with improved biodegradability and biocompatibility is pH-responsive and effective against a broad spectrum of bacteria, which is attributed to the controllable release of NEO for steady availability of the antibiotic on the wound location. Overall, the antimicrobial hydrogel with rapid self-healing and reliable mechanical properties holds significant promise as dressing material for wound healing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2021
·
IF 4.952
Qinglan Wu,Mingfei Ren,Xinxia Zhang,Cheng Li,Ting Li,Zhi Yang,Zhengxing Chen,Li Wang
Rice bran, an underutilized by-product obtained from outer rice layers, has received wide interest due to its abundance, eco-friendliness, and low cost. In this research, cellulose , hemicellulose and lignin as the main components of rice bran were fractionated, and their Cd(II) adsorption capacity, behavior and mechanism were further studied. The adsorption capacity of cellulose for Cd(II) was 5.79 mg/g within the equilibrium time of 10 min, which was 1.8 and 3.6 times those of hemicellulose and lignin, respectively. The Cd(II) adsorption onto cellulose exhibited monolayer surface behavior, whilst the heterogeneous adsorption behavior was observed for hemicellulose and lignin. These differences were related to the discrepancy of morphology and chemical composition in three polymers. The multi-hole sticks morphology of cellulose and porous blocky structure of hemicellulose were observed, while lignin showed compact and agglomerated blocky structure. Cellulose had numerous available adsorption sites including the oxygen-containing functional groups, which bonded with Cd(II) driven by chemical interaction. In conclusion, it highlights that cellulose from rice bran has the great potential of being applied as adsorbent for the Cd(II) removal.
✓ 已验证
产品关联
DOI
高影响因子
Membranes
·
2021
·Vol. 11
·期 4
·242
·
IF 4.106
Yahui Meng,Yunfeng Cao,Kaifeng Xiong,Li Ma,Wenyuan Zhu,Zhu Long,Cuihua Dong
As an important functional material in food industry, intelligent packaging films can bring great convenience for consumers in the field of food preservation and freshness detection. Herein, we fabricated pH-sensing films employing hydroxypropyl guar (HPG), 1-butyl-3-methylimidazolium chloride (BmimCl), and anthocyanin (Anth). Besides, the effects of adding cellulose nanocrystals (CNC) into the composite films upon the films’ structures and physicochemical properties are elucidated. The addition of CNC promoted more compact film structures. Moreover, CNC dramatically improved several properties of the pH-sensing films, including the distinguishability of their color changes, sensitivity to pH, permeability to oxygen and water vapor, solvent resistance, durability, and low-temperature resistance. These results expand the application range of pH-sensing films containing CNC in the fields of food freshness detection and intelligent packaging.Keywords:pH-sensing film;cellulose nanocrystal;barrier properties;stability
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Shi-Cheng Liu,Ming-Bang Wu,Hao Ye,Lin Liu,Lu-Lin Ma,Juming Yao
Highly efficient extraction of uranium from seawater is regarded as an important guarantee for the promotion of nuclear electricity generation. Amidoxime based adsorbents are considered as the most promising materials for uranium recovery due to their high selectivity and binding capability to uranyl ions. Herein, natural celluloses with advantages of low cost, biodegradability , renewability were chosen as the raw materials. Moreover, amidoximated cellulose-based adsorbents are fabricated by two steps of homogeneous reactions including the Michael addition and amidoximation reaction. Compared with traditional surface grafting methods, both the grafting density of active adsorption sites and the utilization of raw materials could be greatly improved because of the lower steric hindrance as well as more exposed reactive sites during the homogeneous reactions. The adsorption capacity of our adsorbents can reach as high as 517.07 mg/g at pH = 7, one of the best cellulose-based adsorbents as far as we know. In addition, excellent hydrophilicity of the adsorbents, which is inherited from the natural cellulose, can endow them with enhanced mass transfer as well as resistance to marine pollutants. More importantly, the adsorption microspheres would be filled into filtration column for dynamic adsorption benefited from their aforementioned merits. The average adsorption capacity could maintain above 2.5 mg/g per day when the filtration column was exposed to simulated seawater for 24 days. All these characteristics make the amidoximated cellulose-based adsorbents potentially applicable to the uranium recovery from seawater.
✓ 已验证
产品关联
DOI
高影响因子
Advances in Materials Science and Engineering
·
2021
·
IF 1.726
Xianmeng Xu,Ning Lu,Shunmin Wang,Mengqi Huang,Shenglong Qu,Feng Xuan
With rapid developments in science and technology, mankind is faced with the dual severe challenges of obtaining needed resources and protecting the environment. The need for sustainable development strategies has become a global consensus. As the most abundant biological resource on Earth, cellulose is an inexhaustible, natural, and renewable polymer. Microfibrillated cellulose (MFC) offers the advantages of abundant raw materials, high strength, and good degradability. Simultaneously, MFC prepared from natural materials has high practical significance due to its potential application in nanocomposites. In this study, we reported the preparation of MFCs from discarded cotton with short fibers by a combination of Fe2+ catalyst-preloading Fenton oxidation and a high-pressure homogenization cycle method. Lignin was removed from the discarded cotton with an acetic acid and sodium chlorite mixed solution. Then, the cotton was treated with NaOH solution to obtain cotton cellulose and oxidized using Fenton oxidation to obtain Fenton-oxidized cotton cellulose. The carboxylic acid content of the oxidized cotton cellulose was 126.87 μmol/g, and the zeta potential was −43.42 mV. Then, the Fenton-oxidized cotton cellulose was treated in a high-speed blender under a high-pressure homogenization cycle to obtain the MFC with a yield of 91.58%. Fourier transform infrared spectroscopy (FTIR) indicated that cotton cellulose was effectively oxidized by Fe2+ catalyst-preloading Fenton oxidation. The diameter of the MFC ranged from several nanometers to a few micrometers as determined by scanning electron microscopy (SEM), the crystallinity index (CrI) of the MFC was 83.52% according to X-ray diffraction (XRD), and the thermal stability of the MFC was slightly reduced compared to cotton cellulose, as seen through thermogravimetric analysis (TGA). The use of catalyst-preloading Fenton oxidation technology, based on the principles of microreactors, along with high-pressure homogenization, was a promising technique to prepare MFCs from discarded cotton.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2021
·Vol. 28
·期 11
·7021-7031
·
IF 5.044
Zhu Longxiang,Feng Zhaoxue,Wang Dafeng,Wu Jiamin,Qiu Jianhui,Zhu Ping
Lignocellulose is an important biomass resource. Its main components cellulose, hemicellulose, and lignin can be used as important energy and chemical raw materials. The special 3-D stereoscopic structure of lignocellulose makes it difficult to separate its components efficiently, limiting large-scale industrial applications. In this work, a novel one-pot and low-temperature phase transition (LTPT) method with no oxidant was applied to efficiently isolate rice straw cellulose microfibers (CMF) from rice straw (RS), with the cellulose content of the CMF reaching 85.4%. The LTPT method can also change the crystal structure of cellulose in RS from cellulose I to cellulose II. Furthermore, experimental results show that CMF can be isolated from RS at a low concentration (3 wt%) of NaOH solution. Graphic abstract In this work, we used the one-pot and low-temperature phase transition method to prepare rice straw cellulose microfibers (CMF) in NaOH solution. The diameter of CMF is about 4.32 μm, and its cellulose content can reach 85%.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）