Canadian Journal of Chemistry
·
2026
·
IF 1
Deqiu Wang,Zhibin Zhang,Ruijin Ma,Weijun Li,Meijun Chen,Dong Wang,Weiqing Xia
This study aimed to address the deficiencies in weather resistance and processability of polycarbonate ((C16H14O3)n). Polymethylsilsesquioxane microspheres were synthesized via a one-step hydrolysis-polycondensation method. Subsequently, a cerium oxide@polymethylsilsesquioxane (CeO2@PMSQ) core-shell structure was fabricated through chemical precipitation technology, enabling the compounding of rare-earth oxides and siloxane polycarbonate. The microstructure, mechanical properties, thermal stability, and UV-shielding performance of the composites were systematically investigated. The results indicated that when the addition amount of CeO2@PMSQ was 0.5%, the tensile strength of the composite remained at 35 MPa, the limiting oxygen index reached 28.5%, and the UV absorption rate increased by 30%. Compared with existing modification methods, this study achieved synergistic improvement of multiple properties without sacrificing mechanical performance, providing theoretical and technical support for the industrial application of special engineering plastics.
✓ 已验证
DOI
高影响因子
Advanced Physics Research
·
2026
·
IF 3.4
Xiaoqi Fang,Yuan Li,Junjie Cui,Zhenye Xu,Zifei Ge,Chengwei Hu,Khurram Abbas,Hong Bi
Light-responsive materials are of great interest for the development of next-generation multifunctional optoelectronic devices. However, the rational design of carbon dots (CDs) with well-defined multichannel emissive behavior remains challenging due to their complex structures and elusive luminescence mechanisms. In this work, photochromic CDs simultaneously exhibiting excitation-dependent room temperature phosphorescence (ED-RTP) were successfully prepared via a one-step microwave-assisted synthesis using 1,4,5,8-naphthalenetetracarboxylic acid and poly- L -lysine as precursors. The resulting N-CDs display pronounced and reversible photochromic behavior under 365 nm UV irradiation, along with long-lived green and orange–red afterglow emissions upon switching off excitation at 295 and 365 nm, respectively. These unique dual-mode luminescence features are mainly attributed to the in situ generation of naphthalimide radical species, along with emissive centers associated with both the carbon core state and the surface state. Benefiting from this dual-mode luminescence behavior, which integrates photochromism and ED-RTP, the N-CDs show great potential for high-level security applications, including multi-state anti-counterfeiting and multidimensional information encryption. Overall, this work offers a feasible strategy for constructing multifunctional phosphorescent CD-based materials and broadens the scope of intelligent light-responsive systems for advanced security identification and artificial-intelligence-related applications.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yanfang Guan,Han Wang,Minggang Shen,Zichen Li,Zhaoyang Xia,Tong Jin,Zhenxiang Qi,Xiang Li,Ruimeng Jin,Jian Jin,Zhiyong Duan,Guoyong Ye,Limin Li,Ye Tian
Though ionogels serve as a key component of wearable and intelligent sensing systems, they possess several characteristics that constrain their practical applications, including poor electro-mechanical synergy, insufficient interface synergy (resulting in low ion migration efficiency and conductive network fracture under large strains), scarce data labels, and inadequate long-term feature extraction capabilities in recognition systems. To address these issues, a new butanediol diacrylate/acrylic acid‑silver nanowire (BDAA/AgNWs) ionogel was synthesized using 365-nm ultraviolet (UV) polymerization, with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and acrylamide (AM) as the monomer-ionic liquid system, dimethyl sulfoxide (DMSO) as the solvent, and silver nanowires (AgNWs) as the filler. The ionogel formed a dual conductive network via metal-ionic liquid/monomer chemical coordination, had a conductivity of 1.394 S/m at 386.81% stretch, good stability, and biocompatibility. The outstanding mechanical properties of ionogel enable its use as a highly sensitive strain-resistive sensor. When mounted on the skin, mechanical deformations induced by facial expressions or joint movements stretch the internal conductive network, resulting in predictable and reproducible changes in electrical resistance. These resistance variations are captured via a voltage divider circuit and converted into digital signals through an analog-to-digital converter, providing a stable and reliable input for subsequent intelligent processing. To overcome existing accuracy limitations in motion recognition, an advanced algorithm integrating Transformer-based temporal feature extraction with triplet contrastive learning is employed. This end-to-end sensing-to-recognition framework enables the system to accurately interpret dynamic physiological signals, achieving a facial expression recognition accuracy of 97.62%—a 15% improvement over mainstream algorithms—and a 10% enhancement in action recognition performance. These results establish a robust foundation for the advancement of flexible, wearable intelligent sensing systems and next-generation human-machine interaction technologies.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Nesma S. Abdelaty,Mostafa Gouda,Amel Thanina Amrouche,Cheng Chen,Baiyi Lu
Casein-based gel delivery systems often exhibit limited loading efficiency and functional performance under conventional formulation approaches. We present a novel UV-induced photo-crosslinking strategy for generating porous casein–polyethylene glycol gels, enhancing resveratrol stabilization and enabling controlled delivery during processing and storage. Structural characterization by FTIR and 13 C NMR supported the formation of an enhanced covalent network via ester and amide linkages. Formulation optimization showed that 10% casein achieved a crosslinking degree of 93.32 ± 0.43% ( p < 0.05), accompanied by rapid gelation (18 s) and a sixfold increase in storage modulus compared with the control, while gel electrophoresis profiles supported controlled degradation behavior. Resveratrol was efficiently encapsulated at 96.31 ± 1.40%, as evidenced by reduced fluorescence intensity in the cross-linked matrix, and the optimized gel retained 86% of the drug during storage. The optimized formulation exhibited enhanced antioxidant performance, with 27.03% higher DPPH radical-scavenging activity and 46.12% higher ABTS response compared to the non-crosslinked system, highlighting that structurally engineered casein-based gels can significantly enhance encapsulation efficiency and the controlled release of sensitive bioactives in pharmaceutical applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Yijing Zhang,Si Sun,Ming Wang,Yaling Han,Xuan Luo,Shenzhen Cong,Tao He,Huan Pang
Membranes featuring structural stability and precise ion selectivity are indispensable for efficient lithium recovery from magnesium-rich brines. Despite the promising potential of metal-organic framework (MOF) membranes in ion separation, the flexibility of aromatic linkers in conventional MOF structures often induces pore size fluctuations, which compromises size-based discrimination efficiency. Herein, defect-free Zr-Frustrated Trigonal-symmetry Rotor (Zr-FTR) membranes were fabricated on polyethylene terephthalate (PET) substrates via a counter-diffusion interfacial growth method. The Zr-FTR framework is constructed with bicyclopentane linkers, whose rigid geometric configuration and substantial torsional energy barriers ensure the retention of a fixed pore aperture (∼4.3 Å). This rigid confinement effect significantly suppresses transient pore expansion, enabling effective ion size sieving while retaining exceptional structural stability. The optimized Zr-FTR-24 membrane exhibits a high Li + permeability of 0.09 mol m −2 h −1 and a Li + /Mg 2+ selectivity of 235, with sustained performance stability over a 7-day continuous operation in mixed-ion solutions. This work establishes a novel design paradigm for suppressing linker dynamics in MOF membranes through rigid linker engineering, ultimately achieving structurally stable and size-exclusive ion transport.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Du Ruiqi,Chen Zemao,Zhang Boyan,Wang Shiyan,Nie Kaiqi,Yan Binhang,Bao Jun,Cheng Yi
The intrinsically low solubility of fatty alcohols in aqueous electrolytes imposes critical mass transport limitations for electrocatalytic oxidation. Conventional anodic electrocatalysts typically suffer from poor activity along with severe oxygen evolution reaction due to their hydrophilicity. Here, we present a ligand engineering strategy utilizing nickel-based metal-organic frameworks (Ni-MOFs) to construct hydrophobic microenvironments. Precise modulation of the aromatic structures of organic ligands promotes local enrichment of fatty alcohols and enhances structural robustness through π - π stacking interactions. Consequently, the optimized Ni-MOF exhibits enhanced activity for octanol oxidation compared to Ni(OH) 2 , achieving a threefold higher production rate and significantly improved Faradaic efficiency (84.7% versus 30.8%). The octanoic acid production rate is competitive with that of state-of-the-art thermocatalytic aerobic oxidation. This work highlights a general design principle for hydrophobic microenvironment to overcome mass transport barriers in organic electrocatalysis, demonstrating its potential for practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Dingyun Zhang,Daozhi Shen,Gangli Zhao,Fangzhou Li,Zechao Han,Peicheng Han,Jiaxing Huo,Qiaolin Gu,Linglan Guo,Ran Tang,Xinlei Wang,Shuaiqi Han,Limin Zhu
Environmental moisture is an abundant, renewable energy source that enables the operation of humidity-driven power generation devices. However, moisture electric generators (MEGs) struggle to operate underwater because of the instability of hygroscopic material and the flooding screening of charges in the aquatic environment. Inspired by the gas film strategy of Oryza sativa leaves, we develop a moisture-driven self-powered device based on a waterproof breathable membrane so that our device can “breathe” even under full immersion while protecting internal components from water. The single device outputs 0.66 V and ∼25 µA under a liquid water environment. By introducing a porous raised-rim structure, the MEG shows high sensitivity to mechanical pressing due to the tunable contact at the interface between electrode and hygroscopic layer, enabling a wide pressure-detection range (1.40 ∼ 70.19 kPa), high sensitivity (0.39 kPa −1 ), and fast response (300 ms). Based on this coupling, the device can detect respiration and support underwater Morse-code communication. By introducing a spacer layer, the device can freely bend and accurately recognize aquatic motion. This study breaks the dependence of MEGs on atmospheric conditions and broadens their functionality from energy harvesting to multimodal sensing, revealing strong potential for underwater wearable and intelligent sensing applications.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Xiaomeng Zou,Shiyu Li,Zhiying Jin,Sisi Huang,Ruilan Niu,Naiqin Fu,Wenqing Li,Jianbo Gao,Zhili Wang
Immunogenic cell death (ICD) represents a promising strategy to stimulate antitumor immunity. Doxorubicin (DOX) is one drug that can trigger ICD. However, DOX has limitations for treating triple-negative breast cancer (TNBC). Its ability to stimulate a strong immune response is weak. The drug also promotes an immunosuppressive tumor microenvironment. This suppression hinders the antitumor immune response. Since reactive oxygen species (ROS) generation is a pivotal ICD trigger, we therefore hypothesized that nintedanib, a triple tyrosine kinase inhibitor known to promote immune cell infiltration and activation within tumors, potentiates DOX-induced ICD by augmenting intratumoral ROS generation. To address this, we engineered a targeted nanoenhancer for TNBC by coencapsulating liquid nintedanib and perfluoropentane (PFP), within a peptide-functionalized (tLyp-1) liposomal shell, creating tLyp-1-Nintedanib-PFP Nanoparticles (tNP-NPs) for use in sonodynamic therapy. This tNP-NP platform is intended for combination therapy with DOX in a chemoimmunotherapeutic strategy. With the assistance of low-intensity focused ultrasound (LIFU), tNP-NPs exhibited potent targeting and penetrating capabilities toward 4T1 TNBC cells, enhanced drug cytotoxicity, ROS production, and ICD markers in vitro. Subsequently, for the in vivo study, to mitigate systemic toxicity, an injectable thermosensitive hydrogel coencapsulating tNP-NPs and DOX was applied for local peritumoral injection. In orthotopic 4T1 TNBC models, this combination elicited potent ICD, promoting dendritic cell (DC) cells maturation and cytotoxic T lymphocyte activation within tumors and draining lymph nodes. This approach achieved exceptional antitumor efficacy and systemic immunity while reversing the immunosuppressive tumor microenvironment, without observable organ toxicity, presenting a robust chemoimmunotherapeutic strategy for TNBC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy & Environmental Materials
·
2026
·
IF 14.1
Bingke Zhang,Chenchen Zhao,Jing Qiao,Changcun Li,Yang Wang,Xingshuo Liu,Dongbo Wang,Gang Liu,Zhao Qian,Rajeev Ahuja,Jinzhong Wang,Degang Zhao
Solar-driven photothermal CO 2 reduction into multicarbon (C 2 + ) products represents a promising yet challenging route for sustainable fuel production. A key obstacle remains the inefficient C–C coupling due to poor CO 2 activation and limited charge utilization, especially under full-spectrum light. Herein, we propose a heterojunction photocatalyst that synergistically integrates the topological insulator Bi 2 Te 3 with oxygen-doped TiO 2-X to address these challenges. The metallic nature of Bi 2 Te 3 enables broad-spectrum photon harvesting from UV to near-infrared and generates substantial photothermal heat, while the oxygen vacancies in TiO 2-X create an asymmetric electronic environment that promotes CO 2 adsorption, bending, and activation. The built-in electric field formed at the heterointerface drives efficient electron transfer from Bi 2 Te 3 to TiO 2-X , which suppresses charge recombination and ensures a prolonged electron supply for multistep reduction reactions. Under full-spectrum irradiation without external heating, the optimized Bi 2 Te 3 /TiO 2-X catalyst achieves a remarkable C 2 + production rate of 15.08 μmol g −1 h −1 with selectivity toward C 2 H 4 and C 2 H 6 . Combined photoelectronic measurements and theoretical analyses confirm that the synergistic photothermal–photocatalytic effect and tailored charge dynamics collectively lower the energy barrier for C–C coupling. This work offers a strategic material design leveraging topological insulators and defect engineering for efficient CO 2 -to-C 2 + conversion.
✓ 已验证
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Waqas Ahmad,M. S. El-Shahawi,Yuzhen Liang,Tianhui Jiao,Yi Xu,Jingjing Wang,Quansheng Chen
Plasmonic metal–support composites have been explored for heterogeneous catalysis with poor robustness under in situ conditions. The substrate performance index for surface-enhanced Raman scattering (SERS) is also limited by spatial heterogeneity and signal instability. Most reported hybrid devices still face a clear trade-off between catalytic and SERS performance, and durable multifunctionality in one integrated system remains largely unexplored. This study reports an integrated platform that combines photoelectrode, photocatalytic, and SERS functions, delivering stable photocurrent, high catalytic efficiency, and reproducible Raman activity, respectively. Herein, a systematic sputtering/electrodeposition combined with a single-step, temperature-controlled annealing route yields hybrid titanium dioxide (TiO2)/gold (Au) nanodendrites. The interconnected Au–TiO2–H2O interfaces promote efficient separation and interfacial transport of photogenerated charge carriers, while interdendritic junctions and sharp tips localize target molecules with high-|E|4 SERS hot spots. The composite enabled on-site detection of malachite green (MG+) in aquaculture water followed by in situ photoelectrocatalytic degradation, administering complete removal (Ct/C0→0) for feed concentrations up to × 10–4 mol/L in a 60 min interval, with synchronous real-time, online monitoring of MG+ across the entire degradation period. The composite also generated a stable and high photocurrent response at −0.73 V to serve for photoelectrochemical applications as a photoanode. Finally, the storage stability, reproducibility across synthesis batches and uniformity (RSD of 10.998% at n = 100), reusability for at least six cycles, self-cleaning, and repeatable detection performance demonstrate that this integrated sensing-degradation platform offers potential for deployment in operational aquatic matrices.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Penghui Du,Peizhe Sun,Junjian Wang,Xiaohan Mo,Liaoliao Yao,Xin Yang,Alex Tat-Shing Chow
Micropollutants (MPs) are ubiquitously present in aquatic environments at nanomolar (nM) concentrations or lower, yet they pose substantial risks to both ecosystems and human health. However, laboratory studies often examine MP transformation at micromolar (μM) levels due to analytical constraints, potentially overlooking certain MP behaviors under environmentally relevant concentrations. This study investigated the oxidation kinetics (kobs) of model MPs across a wide range of initial concentration (C0), with particular emphasis on the distinct roles of short- and long-lived reactive species (SLRS and LLRS) formed in irradiated dissolved organic matter (DOM) solutions. A generalized kinetic framework was developed and revealed that SLRS, such as triplet-state DOM, dominated MP oxidation at higher C0 (≥μM), while LLRS, primarily DOM radicals, drove MP degradation at sub-μM levels. Laser flash photolysis confirmed that LLRS exhibits much longer lifetimes (∼ms) than SLRS (∼μs), enabling elevated LLRS concentrations under trace MP conditions and significantly enhancing MP oxidation. The observed kobs–C0 relationship features a characteristic “three-platform” behavior governed by RS formation rates, reactivities, and lifetimes. These findings advance our understanding of MP fate under real-world conditions and underscore the critical yet often overlooked role of LLRS in aquatic systems.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Yixin Huang,Yihui Zhang,Mengzhe Zhao,Shuwen Yan,Weihua Song
The peroxyacetyl radical [CH3C(O)O2•, PAR] is a highly selective oxidant that plays a critical role in peracetic acid (PAA)-based advanced oxidation processes (AOPs). The kinetic and mechanisms of PAR reactions with dissolved organic matter (DOM), a major sink and reactive matrix in natural waters, have been poorly understood. In this study, we quantitatively characterized the reactivity of PAR toward diverse DOM isolates using a competitive kinetic method. The second-order rate constants between PAR and DOM isolates (kPAR,DOM) were determined, ranging from (4.0 ± 0.2) × 101 to (4.0 ± 0.2) × 102 L mgC–1 s–1 at pH 7.3. Our results demonstrated that phenolic moieties are the dominant PAR-reactive sites in DOM. The measured kPAR,DOM values correlated strongly with bulk DOM properties, including the phenolic content, electron-donating capacity (EDC), and optical E2/E3, enabling empirical prediction of DOM reactivity toward PAR. Beyond quenching, DOM exhibited dual effects on PAR-mediated contaminant oxidation. Anilines or phenols with an electron-drawing group (e.g., −CN and −Cl) were inhibited through back reduction of their radical cations by DOM, while those with an electron-donating group (e.g., −CH3) were promoted through secondary oxidation by reactive DOM-derived intermediates (RIsDOM). These findings establish the first comprehensive kinetic framework for PAR–DOM reactions in aquatic environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子