文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2461至2472个,产品总数3,612个

切换升序
MOF
NEW JOURNAL OF CHEMISTRY · 2023 ·Vol. 47 ·期 27 ·12620-12627 · IF 3.3

In situ-grown Mo-doped MOF-derived phosphide supported nanosheets as an efficient bifunctional electrocatalyst towards urea–water electrolysis

Ying Wu,Junhao Lu,Jinjin Zhao,Ran Zhang,Shaohong Zhang,Zhijuan Wang

MOF-derived phosphide on nickel foam has been successfully synthesized (Mo–Ni2P@NiO/NC/NF), and has been used as a bifunctional catalyst for both the HER at the cathode and the UOR at the anode for urea–water electrolysis. Mo–Ni2P@NiO/NC/NF was used as the electrode to form a Mo–Ni2P@NiO/NC/NF‖Mo–Ni2P@NiO/NC/NF electrolysis cell, which showed a low voltage (1.496 V) for the UOR&HER at a current density of 10 mA cm−2. Moreover, the electrocatalytic performance and morphology of Mo–Ni2P@NiO/NC/NF are not changed in a long-term test, indicating that it has high activity and good stability. This study shows an efficient way to synthesize a promising bifunctional catalyst by developing MOF-derived phosphides on nickel foam.

CAS / MDL: 12125-01-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL AND BIOANALYTICAL CHEMISTRY · 2023 ·Vol. 415 ·期 19 ·4767-4777 · IF 4.3

Boronic acid and fructose-1,6-diphosphate dual-functionalized highly hydrophilic Zr-MOF for HILIC enrichment of N-linked glycopeptides

Zhou Xiaoyu,Zhang Hongyan,Wang Li,Wu Ren’an

The HILIC enrichment is a greatly compatible strategy for the extraction of glycopeptides in proteomics. Herein, a boric acid and fructose-1,6-diphosphate (FDP) dual-functionalized Zr-based metal–organic framework material UIO-PBA&FDP (UIO is the abbreviation for the University of Oslo, and PBA is the abbreviation for carboxy phenylboronic acid) was synthesized, characterized with the desirable excellent hydrophilicity and thus was explored for the enrichment of N-linked glycopeptides utilizing the HILIC interaction between the glycopeptides and the hydrophilic UIO-PBA&FDP at a high level of ACN concentration. A total of 359 N-linked glycopeptides corresponding to 104 glycoproteins were identified from only 1 μL of digested human serum by the enrichment of UIO-PBA&FDP, which showed a superiorly high coverage of the identified glycopeptides. The dual hydrophilic functionalized UIO-PBA&FDP could be an efficient HILIC material for the enrichment of N-linked glycopeptides from complex biological samples.

CAS / MDL: 10026-11-6 217305-49-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2023 ·Vol. 52 ·期 27 ·9346-9355 · IF 4

Controlled preparation of CoNi2S4 nanorods derived from MOF-74 nanoarrays involving an exchange reaction for high energy density supercapacitors

Qihang Chen,Wenna Zhao,Zihao Huang,Guochang Li,Kai Tao,Lei Han

Binary transition metal sulfides are considered to be a promising material for supercapacitors, possessing richer electrochemically active sites and superior electrochemical performance. Metal–organic frameworks (MOFs) are often used as self-sacrificing templates in the preparation of metal sulfides. Usually, direct sulfidation of MOFs tends to cause collapse of the morphological structure and blockage of the ion transport channels, so that the morphology of the original MOF template can be well preserved by using pyrolysis followed by S2− ion exchange. In this paper, we first prepared NiCo–MOF-74 on nickel foam by an in situ transformation method from layered double hydroxides (LDHs) through a ligand exchange reaction. Then, CoNi2S4 was synthesized in two steps involving the pyrolysis of NiCo–MOF-74 and a subsequent S2− ion exchange reaction. Compared with direct sulfidation, this synthetic strategy can well maintain the rod-like morphology of MOF-74 arrays and prevent structural collapse. The surface of CoNi2S4 has a fine nanosheet structure, which exposes more active sites and shows a high specific capacitance of 7.50 F cm−2 at 2 mA cm−2 and an excellent Coulomb efficiency (96.32%). In addition, the hybrid supercapacitor assembled with activated carbon shows a high energy density of 0.64 mW h cm−2 at a power density of 1.64 mW cm−2 and a high capacitance retention of 88.39% after 5000 cycles. These results indicate that rod-shaped CoNi2S4 can be controllably prepared from MOF-74 involving an exchange reaction and has promising application in high-performance supercapacitors.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE ELECTROCHEMICAL SOCIETY · 2022 ·Vol. 169 ·期 12 ·127506 · IF 4.386

A Novel Sensor Based on Cu2O/Mo2C@C Derived from MOF Composites for Simultaneous Detection of Catechol and Hydroquinone

Qi Wang,Jinjin Zhang,Wenjing Liu,Jianying Qu

Herein, the copper-based metal organic framework (CuBDC) modified with MoO3 nanorods uniformly distributed on its surface (MoO3@CuBDC) was synthesized by a one-step solvothermal method, and then was treated with high temperature calcination. A series of characterizations demonstrate that MoO3@CuBDC was transformed into a ternary composite of Cu2O nanospheres, Mo2C, and carbon material (Cu2O/Mo2C@C) after the treatment. Moreover, a novel electrochemical sensor based on Cu2O/Mo2C@C modified glassy carbon electrode (GCE) was constructed for simultaneous sensitive detection of catechol (CC) and hydroquinone (HQ). Due to the excellent electrocatalytic ability of Cu2O/Mo2C@C, the prepared sensor exhibits good electroanalytical performance, which shows good linearity in the concentration ranges of 0.50–200.00 μM for CC and HQ with the limits of detection of 0.38 μM and 0.13 μM. In addition, this sensor can be used to detect CC and HQ simultaneously in real samples with satisfactory results.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Wireless food-freshness monitoring and storage-time prediction based on ammonia-sensitive MOF@SnS2 PN heterostructure and machine learning

Yifan Huang,Xue Zhang,Sanhu Liu,Rongguo Wang,Jinhong Guo,Yidi Chen,Xing Ma

Conductive metal–organic frameworks (C-MOF) materials possess a high absorbability and structural tunability. However, their low sensitivity and poor specificity limit their applications. Constructing PN heterostructures with other semiconductor materials can regulate the C-MOF energy band structure, reduce particle stacking, and boost gas-sensing performance. Here, we synthesize Cu 3 (HHTP) 2 (C-MOF) material in-situ onto SnS 2 nanolayers to form PN heterojunctions that facilitate high-performance NH 3 sensing, a four times higher response compared to pristine MOF-based sensors, ultralow detection limits (experimental: 125 ppb; theoretical: 9.84 ppb), and improved selectivity against various rotten gases. Machine learning is applied to analyse the effects of temperature, time, humidity, and category on the sensing response, achieving 78.5 % accuracy in predicting meat storage time. By adding a Bluetooth module and cloud-based signal analysis, we provide a proof-of-concept for a portable, fast response, non-destructive remote gas sensing device for real-time food-freshness monitoring deployable at any stage along the food supply chain.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nanomaterials · 2023 ·Vol. 13 ·期 3 ·493 · IF 5.3

Synthesis of Ni3S2 and MOF-Derived Ni(OH)2 Composite Electrode Materials on Ni Foam for High-Performance Supercapacitors

Meng Shao,Jun Li,Jing Li,Yanan Yan,Ruoliu Li

Honeycomb-like Ni(OH)2/Ni3S2/Ni foam (NF) was fabricated via a two-step hydrothermal process and subsequent alkalization. Ni3S2with a honeycombed structure was in-situ synthesized on the NF surface by a hydrothermal process. MOF-derived Ni(OH)2nanosheets were then successfully grown on the Ni3S2/NF surface by a second hydrothermal process and alkaline treatment, and a large number of nanosheets were interconnected to form a typical honeycomb-like structure with a large specific surface area and porosity. As a binder-free electrode, the prepared honeycomb-like Ni(OH)2/Ni3S2/NF exhibited a high specific capacitance (2207 F·g−1at 1 A·g−1, 1929.7 F·g−1at 5 mV·s−1) and a remarkable rate capability and cycling stability, with 62.3% of the initial value (1 A·g−1) retained at 10 A·g−1and 90.4% of the initial value (first circle at 50 mV·s−1) retained after 5000 cycles. A hybrid supercapacitor (HSC) was assembled with Ni(OH)2/Ni3S2/NF as the positive electrode and activated carbon (AC) as the negative electrode and exhibited an outstanding energy density of 24.5 Wh·kg−1at the power density of 375 W·kg−1. These encouraging results render the electrode a potential candidate for energy storage.Keywords:Ni(OH)2/Ni3S2/NF;honeycomb-like structure;two-step hydrothermal;alkalization;MOF-derived Ni(OH)2;supercapacitor

CAS / MDL: 68-12-2 554-95-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Batteries-Basel · 2023 ·Vol. 9 ·期 1 ·46 · IF 4

MOF-Derived Urchin-like Co9S8-Ni3S2 Composites on Ni Foam as Efficient Self-Supported Electrocatalysts for Oxygen Evolution Reaction

Yingping Bu,Yawen Zhang,Yingying Liu,Simin Li,Yanlin Zhou,Xuefen Lin,Zicong Dong,Renchun Zhang,Jingchao Zhang,Daojun Zhang

Effective and inexpensive electrocatalysts are significant to improve the performance of oxygen evolution reaction. Facing the bottleneck of slow kinetics of oxygen evolution reaction, it is highly desirable to design the electrocatalyst with high activity, good conductivity, and satisfactory stability. In this work, nickel foam supported hierarchical Co9S8–Ni3S2composite hollow microspheres were derived from in situ-generative MOF precursors and the subsequent sulfurization process by a simple two-step solvothermal method. The composite microspheres were directly grown on nickel foam without any binder, and nickel foam was used as the nickel source and support material. The morphology and constitution of the series self-supported electrodes were characterized by SEM, TEM, XRD, XPS, and Raman, respectively. The unique porous architecture enriched the electrode with sufficient active surface and helped to reactants and bubble evolved during electrochemical water oxidation. Through tuning the concentration of cobalt source and ligand, the content ratio of Co9S8and Ni3S2can be modulated. The heterostructures not only afford active interfaces between the phases but also allow electronic transfer between Co9S8and Ni3S2. The optimized Co9S8-Ni3S2/NF-0.6 electrode with the highest electrochemical surface area and conductivity shows the best OER performance among the series electrodes in 1 M KOH solution. The overpotential of Co9S8-Ni3S2/NF-0.6 is only 233 mV when the current density is 10 mA cm−2, and corresponding Tafel slope is 116.75 mV dec−1. In addition, the current density of Co9S8-Ni3S2/NF-0.6 electrocatalyst hardly decreased during the 12 h stability measurement. Our approach in this work may provide the future rational design and synthesis of satisfactory OER electrocatalysts.

CAS / MDL: 64-17-5 62-55-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Large Microsphere Structure of a Co/C Composite Derived from Co-MOF with Excellent Wideband Electromagnetic Microwave Absorption Performance

Mengyi Zhang,Xiaohui Sun,Xudong Cai,Xiaolu Zhan,Yufei Wu,Xuyang Zhang,Guohua Wu,Xiangwei Wang

In the field of electromagnetic wave (EMW) absorption, carbon matrix materials based on metal–organic frameworks (MOFs) have drawn more interest as a result of their outstanding advantages, such as porous structure, lightweight, controlled morphology, etc. However, how to broaden the effective absorption bandwidth [EAB; reflection loss (RL) ≤ −10 dB] is still a challenge. In this paper, large microsphere structures of a Co/C composite composed of small particle clusters were successfully prepared by the solvothermal method and annealing treatment. At a filling ratio of 40 wt %, the Co/C composite shows attractive microwave absorption (MA) performance after being annealed at 600 °C in an atmosphere of argon. With an EAB of 6.32 GHz (9.92–16.24 GHz) and a thickness of just 2.57 mm, the minimum RL can be attained at −54.55 dB. Most importantly, the EAB can attain 7.12 GHz (10.88–18.0 GHz) when the thickness is 2.38 mm, which is larger than that of the majority of MOF-derived composites. The superior MA performance is strongly related to excellent impedance matching and a higher attenuation constant. This study provides a simple strategy for synthesizing a MOF-derived Co/C composite with a wide EAB.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Water Process Engineering · 2023 · IF 7

Metal-free N-doped spongy carbon recycled from waste MOF for enhanced catalytic ozonation: Mechanistic insights and practical applications

Jueqin Chen,Cao Yang,Tian Wu,Jian Wang,Lihui Yang,Wei Sun,Wei Li,Anqi Wang,Sihao Lv

At present, considerable efforts have been devoted to the development and application of MOFs, and some MOFs have realized industrial mass production and sales. However, little attention was paid to the treatment and disposal of the resulting waste MOF . In this study, the antibiotic(N source)-saturated waste MOF adsorbent was recycled into metal-free N-doped carbocatalyst through one-step pyrolysis . Compared with the pristine MOF-derived undoped carbon, N-doping led to nearly 2-fold enhancement in the pseudo-first-order rate constant for catalytic ozonation of oxalic acid (OA), and the COD removal of coking and swine wastewaters reached more than 60 % within 30 min. Apart from the formation of spongy porous morphology and the boosting of specific surface area from 253.7 to 320.6 m 2 /g after N doping, the characterization analysis and OA degradation results revealed that oxygen vacancies, hydroxyl groups and N species were the main active sites. Furthermore, it was identified the dominant contribution of OH in OA destruction, followed by O 2 — and 1 O 2 , and the metal-free N-doped carbon displayed good reusability and chemical stability. This study proposes a feasible strategy for the utilization of waste MOF, showing great reference significance for the expansion of material functions.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Inorganic Chemistry Frontiers · 2023 ·Vol. 10 ·期 17 ·5098-5110 · IF 7

Oxygen vacancies confined in hierarchically porous CsPbBr3@Pb-MOF through in situ structural transformation for promoting photocatalytic CO2 reduction

Yangwen Hou,Man Dong,Jingting He,Jing Sun,Chunyi Sun,Xiao Li,Xinlong Wang,Zhongmin Su

All-inorganic perovskite (CsPbBr3) nanocrystals (NCs) are exceptional candidates for photocatalysis due to their optimal band structure, high molar extinction coefficient, and long charge-carrier diffusion lengths. However, their inevitable instability and low charge transfer efficiency have prevented their widespread applications. A strategy that can improve both stability and charge separation efficiency is desperately required. Herein, by introducing an in situ structural transformation strategy, hydrophobic hierarchically porous CsPbBr3@Pb-MOF is obtained which exhibits high durability in water for more than 7 weeks and appealing thermal stability and resistance to anion intrusion. Meanwhile, abundant oxygen vacancies are detected which efficiently suppress the photogenerated charge recombination. As a result, impressive CO2 photoreduction activity is achieved with CsPbBr3@Pb-MOF as a catalyst. Through a gas–solid reaction (without sacrificial agents and photosensitizers), this CsPbBr3@Pb-MOF-2 composite exhibits a CO yield of 107 μmol g−1 h−1 with 99.2% selectivity under visible-light (λ > 420 nm) irradiation, surpassing most reported CsPbX3-based photocatalysts under similar conditions.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

A novel flower-like nickel-metal-organic framework (Ni-MOF) membrane for efficient multi-component pollutants removal by gravity

Lei Han,Jing Ma,Hongjun Lin,Cheng Chen,Jiaheng Teng,Bisheng Li,Dieling Zhao,Yanchao Xu,Wei Yu,Liguo Shen

The recycling of wastewater containing multiple pollutants is an urgent issue that requires sustainable and effective solutions. Gravity-driven membrane separation is a highly promising technology due to its low energy consumption, low transmembrane pressure, and ease of operation. To further enhance its advantages, this work explores the use of metal-organic frameworks (MOFs) for membrane modifications, which possess a porous structure, stable chemical properties, and high specific surface area. Specifically, flower-like nickel-based MOF particles were synthesized and assembled on a nylon membrane to prepare a novel Ni-MOF membrane. The Ni-MOF membrane displayed superhydrophilic properties, as evidenced by a water contact angle of 0°, and underwater superoleophobic properties, with an underwater oil contact angle of 154.37°. The Ni-MOF membrane demonstrated a significantly improved rejection rate for four types of dye solutions, particularly Congo red solution, which was rejected at a rate of 97.71% only through gravity-driven separation. Additionally, the Ni-MOF membrane exhibited exceptional performance for oil-water emulsion and microplastic wastewater, which was evidenced by the rejection of 95% and 99%, respectively. Moreover, the cycling tests revealed that the Ni-MOF membrane equipped long-term stability. These data demonstrated the Ni-MOF membrane had broad application prospects in the separation of wastewater containing multi-component pollutants.

CAS / MDL: 10312-55-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2023 · IF 8.8

An electrochemical sensor derived from Cu-BTB MOF for the efficient detection of diflubenzuron in food and environmental samples

Xian-Xian Ji,Yu-Long Liu,Xin-Yue Chang,Rui-Long Li,Fei Ye,Liu Yang,Ying Fu

Diflubenzuron is widely used as a benzoylurea insecticide, and its impact on human health should not be underestimated. Therefore, the detection of its residues in food and the environment is crucial. In this paper, octahedral Cu-BTB was fabricated using a simple hydrothermal method. It served as a precursor for synthesizing Cu/Cu 2 O/CuO@C with a core–shell structure through annealing, creating an electrochemical sensor for the detection of diflubenzuron. The response of Cu/Cu 2 O/CuO@C/GCE , expressed as Δ I / I 0 exhibited a linear correlation with the logarithm of the diflubenzuron concentration ranging from 1.0 × 10 −4 to 1.0 × 10 −12 mol·L −1 . The limit of detection (LOD) was determined to be 130 fM using differential pulse voltammetry (DPV). The electrochemical sensor demonstrated excellent stability, reproducibility, and anti-interference properties. Moreover, Cu/Cu 2 O/CuO@C/GCE was successfully employed to quantitatively determine diflubenzuron in actual food samples (tomato and cucumber) and environmental samples (Songhua River water, tap water, and local soil) with good recoveries. Finally, the possible mechanism of Cu/Cu 2 O/CuO@C/GCE for monitoring diflubenzuron was thoroughly investigated.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。