文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2473至2484个,产品总数3,200个

切换升序
G
DYES AND PIGMENTS · 2019 · IF 4.018

Fabrication of Mn/O co-doped g-C3N4: Excellent charge separation and transfer for enhancing photocatalytic activity under visible light irradiation

Xiuquan Xu,Songmei Wang,Tongjie Hu,Xiaofeng Yu,Jiapeng Wang,Chao Jia

Co-doping has been proven to significantly enhance the photocatalytic performance of g-C 3 N 4 . Herein, Mn and O co-doped g-C 3 N 4 (Mn/O-CN) composites were constructed for the first time by a simple one-pot calcining route. The systematic characterization results of XRD , FT-IR, TEM-EDS, XPS and DRS revealed that the Mn and O elements were co-doped into the CN framework successfully as Mn 3+ / 4+ and n-π* conjugate forms, respectively. The as-prepared Mn/O-CN-2 achieved the highest visible-light-driven degradation rate constant of 0.0290 and 0.0267 min −1 for degradation of Malachite green (MG) and Amido black 10B (AB 10B), which were about 5.09 and 5.45 folds higher than that of pristine CN, respectively. The improved photocatalytic degradation property of Mn/O-CN were mainly benefited from the extended visible light utilization, the enlarged specific surface area, and the accelerated separation and transfer of photo-induced charge carriers, which were all induced by the synergistic effects of Mn and O co-doped. Finally, the active species capturing experiments proved that the superoxide radicals (·O 2 − ) and holes (h + ) acted as the predominant roles in the photocatalytic degradation process .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2019 · IF 5.155

Convenient one-step fabrication and morphology evolution of thin-shelled honeycomb-like structured g-C3N4 to significantly enhance photocatalytic hydrogen evolution

Biao Zhou,Muhammad Waqas,Bo Yang,Ke Xiao,Shengye Wang,Caizhen Zhu,Juying Li,Junmin Zhang

Synthesis of three-dimensional carbon nitride (g-C 3 N 4 ) structures is a promising but challenging task for effectively photocatalytic water splitting to generate H 2 . In this study, thin-shelled honeycomb-like structured g-C 3 N 4 (g-C 3 N 4 -TSH) was successfully synthesized via facile one-step co-pyrolysis of melamine/NH 4 Cl mixture and the morphology evolution mechanism was revealed systematically. By varying the ratios of melamine/NH 4 Cl precursor and thermal preparation temperatures, thin-shelled and thick-shelled honeycomb-like structured g-C 3 N 4 were obtained. Also, the key intermediate phases were identified by their structure characterizations, which revealed low-temperature phase transition of 1-D tube-like melamium/NH 4 Cl adduct, then transforming to 2-D multiple plate-like melamium/melon NH 4 Cl complex by sintering, and finally evolving to g-C 3 N 4 -TSH at high temperature. The final hierarchical structure has several beneficial features as hollow, mesoporous, ultrathin, and honeycomb-like form, which caused its high surface area, excellent mass transfer rate and good light absorption ability. As a result, the g-C 3 N 4 -TSH with Pt as co-catalyst showed remarkable photoactivity for H 2 evolution, with an apparent quantum efficiency of 9.86% at 420 ± 10 nm, which is superior to many reported modified g-C 3 N 4 . This study revealed the evolution mechanism of g-C 3 N 4 -TSH, which is conducive to design various dimension oriented g-C 3 N 4 structures via solid-state chemistry for photocatalytic H 2 evolution.

CAS / MDL: 18497-13-7 102-71-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Sciences · 2022 · IF 6.796

Novel Ag-bridged dual Z-scheme g-C3N4/BiOI/AgI plasmonic heterojunction: Exceptional photocatalytic activity towards tetracycline and the mechanism insight

Wenxia Wang,Zhen Li,Kailin Wu,Guodong Dai,Qingping Chen,Lihua Zhou,Junxia Zheng,Liang Ma,Guiying Li,Wanjun Wang,Taicheng An

Rational design and synthesis of highly efficient and robust photocatalysts with positive exciton splitting and interfacial charge transfer for environmental applications is critical. Herein, aiming at overcoming the common shortcomings of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers and unstable structure, a novel Ag-bridged dual Z-scheme g-C 3 N 4 /BiOI/AgI plasmonic heterojunction was successfully synthesized using a facile method. Results showed that Ag-AgI nanoparticles and three-dimensional (3D) BiOI microspheres were decorated highly uniformly on the 3D porous g-C 3 N 4 nanosheet, resulting in a higher specific surface area and abundant active sites. The optimized 3D porous dual Z-scheme g-C 3 N 4 /BiOI/Ag-AgI manifested exceptional photocatalytic degradation efficiency of tetracycline (TC) in water with approximately 91.8% degradation efficiency within 165 min, outperforming majority of the reported g-C 3 N 4 -based photocatalysts. Moreover, g-C 3 N 4 /BiOI/Ag-AgI exhibited good stability in terms of activity and structure. In-depth radical scavenging and electron paramagnetic resonance (EPR) analyses confirmed the relative contributions of various scavengers. Mechanism analysis indicated that the improved photocatalytic performance and stability were ascribed to the highly ordered 3D porous framework, fast electron transfer of dual Z-scheme heterojunction, desirable photocatalytic performance of BiOI/AgI and synergistic effect of Ag plasmas. Therefore, the 3D porous Z-scheme g-C 3 N 4 /BiOI/Ag-AgI heterojunction had a good prospect for applications in water remediation. The current work provides new insight and useful guidance for designing novel structural photocatalysts for environment-related applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE CHEMISTRY · 2022 · IF 3.656

Solar-initiated continuous electron injection to promote Fe3+/Fe2+ catalytic cycle in tourmaline/g-C3N4 composite system for enhanced PMS activation

Zhenyu Shen,Zhexin Zhu,Gangqiang Wang,Zhendong Wang,Wenxing Chen,Wangyang Lu

It is of great significance for improving the electron transmission performance of graphite phase carbon nitride (g-C 3 N 4 ) by an economical method. Herein, urea was mixed with tourmaline (TM) and calcined to obtain g-C 3 N 4 /TM composite photocatalyst . Under solar light, g-C 3 N 4 /TM activated peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) entirely within 25 ​min. g-C 3 N 4 /TM had a superior photocatalytic oxidation performance under solar light than g-C 3 N 4 . Photogenerated electron-hole pairs of g-C 3 N 4 were efficaciously suppressed, originating from the more excellent electronic transfer to TM. Four active species, including SO 4 • - , •OH, 1 O 2 , and O 2 • - , were identified for the degradation of CBZ. Ten intermediates of CBZ and six intermediates of sulfaquinoxaline sodium (SQXNa) were determined by using ultra-performance liquid chromatography coupled with a high definition mass spectrometer (UPLC-HDMS), and a degradation pathway was proposed. As the reaction progressed, all aromatic nuclear intermediates were mineralized. The degradation of other organic pollutants by the g-C 3 N 4 /TM/PMS system validated the universal adaptability in practical applications. This research provided an effective way to improve the g-C 3 N 4 photocatalytic activity in wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES · 2022 ·Vol. 23 ·期 21 ·13221 · IF 6.208

Construction of Highly Active Zn3In2S6 (110)/g-C3N4 System by Low Temperature Solvothermal for Efficient Degradation of Tetracycline under Visible Light

Haohao Huo,Yuzhen Li,Shaojie Wang,Siyang Tan,Xin Li,Siyuan Yi,Lizhen Gao

Herein, Zn3In2S6photocatalyst with (110) exposed facet was prepared by low temperature solvothermal method. On this basis, a highly efficient binary Zn3In2S6/g-C3N4was obtained by low temperature solvothermal method and applied to the degradation of tetracycline (TC). The samples of the preparation were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, UV–vis diffuse reflection spectroscopy, and photoluminescence spectroscopy. Furthermore, the degradation performance of photocatalysts on TC was investigated under different experimental conditions. Finally, the mechanism of Zn3In2S6/g-C3N4composite material degrading TC is discussed. The results show that Zn3In2S6and Zn3In2S6/g-C3N4photocatalysts with excellent performance could be successfully prepared at lower temperature. The Zn3In2S6/g-C3N4heterojunction photocatalyst could significantly improve the photocatalytic activity compared with g-C3N4. After 150 min of illumination, the efficiency of 80%Zn3In2S6/g-C3N4to degrade TC was 1.35 times that of g-C3N4. The improvement of photocatalytic activity was due to the formation of Zn3In2S6/g-C3N4heterojunction, which promoted the transfer of photogenerated electron–holes. The cycle experiment test confirmed that Zn3In2S6/g-C3N4composite material had excellent stability. The free radical capture experiment showed that ·O2−was the primary active material. This study provides a new strategy for the preparation of photocatalysts with excellent performance at low temperature.Keywords:Zn3In2S6/g-C3N4;tetracycline;low temperature;photocatalytic

CAS / MDL: 10025-82-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2022 · IF 8.943

Polyaniline@g-C3N4 derived N-rich porous carbon for selective degradation of phenolic pollutants via peroxymonosulfate activation: An electron transfer mechanism

Lidong Kou,Qingfeng Fan,Yuhong Yang,Xianying Duan,Kai Jiang,Jing Wang

N -doped carbons have attracted extensive attention as catalysts for peroxymonosulfate (PMS) activation towards environmental remediation. However, synthesis of N -rich carbocatalysts is challenging and PMS activation mechanism is still unclear. Herein, novel N -rich porous carbocatalysts ( C -P x CN-T) were synthesized by carbonization of polyaniline nanorods coated g-C 3 N 4 . C –P 50 CN-900 (polyaniline content 50%) calcined at 900 °C had high surface area (358 m 2 /g), product yield (27.1%) and N content (12.27 at%). It showed superior performance in activating PMS to degrade and mineralize various phenolic pollutants in a wide pH range (2–11) and with the co-existence of water constituents. A positive correlation was observed between phenol oxidation rates and contents of C O, C –C/C C and graphitic N, which served as active sites to facilitate adsorption of pollutants and PMS on C –P 50 CN-900 and subsequent electron-transfer from pollutants to PMS. Overall, this study provides new insights into rational design of N -doped carbocatalysts and elucidation of electron transfer pathway in PMS activation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Engineering the interfacial electric field in a NiSnO3/g-C3N4 S-scheme heterojunction for efficient photocatalytic hydrogen production and CO2 reduction.

Jawad Ahmad Jrar,Muhammad Bilal,Muhammad Faizan,Bipeng Yan,Alauddin,Zia Ur Rehman,Yongcai Zhang,Kewang Zheng,Jianhua Hou

Green synthesis of 2D S-scheme NiSnO 3 /g-C 3 N 4 heterojunction photocatalyst. • Interfacial field and N-vacancies promote efficient charge separation. • Bandgap narrowing with visible-NIR light absorption confirmed by UV-Vis. • Achieved 3963 μmol g −1 h −1 H 2 evolution and 78 μmol g −1 h −1 CO 2 reduction. • Stable, scalable, and multifunctional photocatalyst for solar energy conversion. Efficient solar-driven hydrogen generation and carbon dioxide conversion are key to renewable energy and environmental remediation. Here, a porous NiSnO 3 /g-C 3 N 4 (NSO/CN) S-scheme heterojunction with engineered nitrogen vacancies and a strong interfacial electric field, yielding exceptional photocatalytic performance. The NSO/0.5-CN composite exhibits a high specific surface area and a narrowed bandgap, promoting broad visible-light absorption and abundant active sites. Charge-carrier studies confirm spatially separated electron-hole transfer via an S-scheme mechanism. As a result, hydrogen evolution reaches 3854.7 with standard deviation (SD) 108.9 µmol g −1 h −1, over five times the rate of pristine NiSnO 3, and CO 2 reduction attains 74.53 with SD 3.5 µmol g −1 h −1 , far surpassing either component alone. The strong built-in field and Nitrogen-vacancies inhibit recombination and increase redox activity, resulting in consistent performance and complete dye degradation. This study uses defect engineering and an S-scheme design to demonstrate that NiSnO 3 /g-C 3 N 4 can be engaged as a photocatalyst to generate renewable energy, utilise CO 2 , and clean up pollutants. The computational study imparts support to the innovative findings and reveals a novel method for creating multifunctional nanostructures using a green water bath. Download: Download high-res image (174KB) Download: Download full-size image The graphical abstract illustrates the S-scheme heterojunction with enhanced charge separation for multi-functional photocatalysis.

CAS / MDL: 10026-06-9 69098-15-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Z-scheme g-C3N4/α-FOD heterojunction-assisted persulfate activation for degradation of tetracycline hydrochloride under visible light: Insights into mechanism

Hongyu Lu,Feilin Zou,Xiaowei Liu,Wenjing Zhang,Ling Zhang,Chengxun Deng,Zhimin Yu,Olivier Monfort,Peng Cheng

Tetracycline hydrochloride (TCH) as an emerging pollutant poses challenges for removal using traditional treatment methods. A new and high-efficient photocatalyst graphitic carbon nitride/α-ferrous oxalate dihydrate (g-C 3 N 4 /α-FOD) was synthesized to solve this issue, which acted as a Z-scheme heterojunction for efficient activation of persulfate (PS) degradation TCH under visible (Vis) light irradiation. A comprehensive characterization of the g-C 3 N 4 /α-FOD photocatalyst was performed to analyze the structural, morphological, optical, and electrochemical properties. The Z-scheme heterojunction enabled broader visible-light absorption and enhanced charge transfer. In g-C 3 N 4 /α-FOD/PS/Vis system, SO 4 − , OH, and O 2 − were identified as the main reactive species and contributed to the efficient degradation of TCH. The initial 100 mg/L TCH concentration can be degraded to 11.3 mg/L within 120 min, reaching a high mineralization rate of 83 %. Density functional theory calculation successfully predicted that the sites on TCH molecules with high Fukui index were preferable to be attacked by the reactive species. The ring contraction and elimination reaction were found to be two major degradation pathways of TCH. The cycling experiments confirmed the good stability and reusability of the g-C 3 N 4 /α-FOD photocatalyst. This study successfully confirms that heterojunction materials can enhance the activation potential of PS, which provides a reference for realizing the harmless degradation of environmental pollutants under visible light.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2023 ·Vol. 48 ·期 1 ·228-236 · IF 3.3

Enhanced oxidative degradation of tetracycline by visible light-promoted g-C3N4 modified Cu3(OH)4SO4/Cu7S4 composites under an air atmosphere

Yan Wang,Haoran Li,Daqing Chen,Danhua Ge,Xiaojun Chen

Herein, a simple solvothermal method was used to prepare a CuSx/g-C3N4 (CSG) heterojunction as an efficient oxygen activator containing sulfur vacancies (SVs). The as-prepared catalyst can activate oxygen to effectively degrade tetracycline (TC). The degradation rate of TC (20 mg L−1) reached 98.9% in 90 min over CSG (0.02 g L−1) under an air atmosphere, which maintained good performance within a wide pH range of 6–10. It was almost unaffected by any light source and water quality, indicating a highly efficient oxygen activator and good stability. Moreover, the trapping experiments and EPR results revealed that the main reactive oxygen species (ROSs) were singlet oxygen (1O2) and hydroxyl radicals (˙OH). CSG (4 : 1) enabled the activation of oxygen-produced ROS for removing TC even in the dark, which was in accordance with the EPR results. In addition, the CSG catalyst exhibited a good removal performance in practical wastewater treatment. Our study demonstrated that the CSG catalyst had the potential to remove organic pollutants from wastewater.

CAS / MDL: 107-15-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
DIAMOND AND RELATED MATERIALS · 2023 · IF 4.1

Construction of rare-metal neodymium-doped ZnO and g-C3N4 Z-type heterostructures enhance the photocatalytic efficiency of methylene blue removal

Mingxia Tian,Guyu Zhang,Xinlei Zhao,Yumin Yan,Jianbo Zhao,Hui Bai,Jianhui Jiang

Herein, Nd-ZnO/g-C 3 N 4 (NZCN) composites were obtained by doping rare-earth element Nd with ZnO using a hydrothermal method , coupled with g-C 3 N 4 (CN) electrostatic ultrasonic self-assembly. The NZCN composite exhibited an impressive methylene blue (MB) removal rate of 94.88 %, with a degradation rate of 0.02637 min −1 after 105 min exposure to 500 W xenon lamp irradiations. Comparatively, the degradation rate of MB by the NZCN composite was five and twice times higher than ZnO and CN samples, respectively. This significant improvement can be attributed to the synergistic effect of Nd, ZnO, and CN, which not only widened the light absorption range but also enhanced the density, separation, and transport of photogenerated electrons (e − ) and holes (h + ), thus improving the photocatalytic performance of the NZCN composites. An in-depth investigation into the photocatalytic reaction process was carried out using free-radical active-species capture experiments, confirming the critical role of h + . Furthermore, the reproducibility and stability of the NZCN composites were assessed over five experimental cycles, demonstrating consistent and stable MB degradation rates of 90.1 % while retaining the crystal structure unchanged. Overall, the construction of rare-earth-metal-doped ZnO and Z-type heterojunctions synergistically improves photocatalytic activity and provides a green and environmentally friendly approach for the removal of organics from wastewater.

CAS / MDL: 108-78-1 16454-60-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2023 · IF 5.9

Oxygen-Doped Porous g-C3N4 via Oxalic Acid-Assisted Thermal Polycondensation as a Visible Light-Driven Photocatalyst for Bisphenol A Degradation

Yuan Wei,Yubing Liu,Chao Liu,Xin Li,Kai Song,Runquan Wang,Wanping Chen,Guanghong Zhao,Ronghui Liu,Hongyu Wang,Gaofeng Shi,Guoying Wang

Graphitic phase carbon nitride (g-C3N4) demonstrates tremendous potential for photocatalytic degradation of organic pollutants, but its performance is severely limited by the high recombination of photogenerated electron–hole pairs. This study introduces an innovative approach oxalic acid-assisted thermal polycondensation to construct a series of oxygen-doped porous g-C3N4 (OCN) nanostructured materials, which simultaneously utilizes the heat-induced foaming mechanism of oxalic acid to achieve element doping modification. The results indicate that modified OCN-1.5 exhibited the optimal photocatalytic activity. Under visible light conditions, the degradation efficiency of OCN-1.5 catalyst toward bisphenol A (BPA, 30 mg L–1) reached 82.55% (240 min light irradiation). This represents a significant improvement of 60% compared to the traditional g-C3N4 catalyst. The mechanism is as follows: on the one hand, the doping of oxygen atoms alter the charge distribution and symmetry of g-C3N4, thereby enhancing the separation efficiency of photogenerated charge carriers. Furthermore, under visible light irradiation, it facilitates the formation of conjugated delocalized systems associated with e– and h+ on the surface, leading to an accelerated mineralization degradation of OCN and BPA at the interface. Additionally, the •O2– radicals generated from the interfacial reactions can also directly oxidize BPA simultaneously. On the other hand, the construction of a porous nanostructure provides a larger specific surface area and channels for the diffusion of charge carriers, thereby enhancing light capture and transfer. Moreover, this structure offers more active sites for the adsorption and degradation of pollutants. Therefore, the synthetic strategy proposed in this study overcomes the long-standing aggregation issue in the synthesis of g-C3N4, providing a perspective for the scalable preparation of high-performance g-C3N4 photocatalysts and the removal of organic pollutants.

CAS / MDL: 2226-96-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2023 · IF 9.9

g-C3N4 promoted MOF-derived Fe single atoms anchored on N-doped hierarchically porous carbon for high-performance Zn-air batteries

Chao Chen,Shilong Zhou,Jiawei Xia,Le Li,Xingyue Qian,Fengxiang Yin,Guangyu He,Haiqun Chen

Exploring efficient, easy-to-manufacture, and inexpensive bifunctional electrocatalysts with abundant accessible active sites is crucial for rechargeable zinc-air batteries (ZABs). Herein, we report the strategy consisting of the space confinement and pore-making engineering to fabricate single-atom catalyst enriched with Fe-N 4 sites anchored on N -doped hierarchically porous carbon (Fe-NC-C 3 N 4 ). The optimized Fe-NC-C 3 N 4 exhibits excellent oxygen reduction/evolution reaction (ORR/OER) activities with a half-wave potential ( E 1/2 ) of 0.90 V vs. RHE and a promising low overpotential of 0.305 V vs . RHE at 10 mA·cm −2 in alkaline electrolyte. These superior catalytic activities are attributed to the combined effect between the atomic active sites and the well-balanced micro-meso-macropore structures. The homemade liquid Zn-air battery (ZAB) assembled with Fe-NC-C 3 N 4 catalyst displays a power density of 133.59 mW·cm −2 and a significant energy density of 882.58 mAh·g −1 , exceeding those of the equipment with commercial Pt/C-RuO 2 (56.82 mW·cm −2 and 643.87 mAh·g −1 , respectively). Particularly, the corresponding flexible wearable ZAB manifests outstanding foldability and cyclical stability. This work opens a new perspective for the structural design of single-atom catalysts in the energy storage and conversion area.

CAS / MDL: 693-98-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。