FEBS Open Bio
·
2021
·Vol. 11
·期 8
·2118-2126
·
IF 2.693
Na Wei,Tan Lu,Libin Yang,Yonghan Dong,Xiaotan Liu
Ferroptosis is an iron-dependent programmed cell death, which participates in the pathogenesis of spinal cord injury (SCI). Our previous study has revealed that Lipoxin A4 (LXA4) exerts a protective role in SCI. Here, we investigated whether LXA4 can protect SCI through inhibiting neuronal ferroptosis. We treated primary spinal cord neurons with Erastin (ferroptosis activator) to induce ferroptosis. Erastin treatment reduced cell viability and enhanced cell death of primary spinal cord neurons, which was rescued by ferrostatin-1 (ferroptosis inhibitor). Moreover, Erastin repressed glutathione peroxidase 4 (GPX4) expression and the levels of glutathione and cysteine in primary spinal cord neurons. Erastin also enhanced the expression of ferroptosis biomarkers (PTGS2 and ACSL4) and the levels of reactive oxygen species (ROS) in primary spinal cord neurons. The influence conferred by Erastin was effectively abolished by LXA4 treatment. Furthermore, LXA4 enhanced the protein expression of p-AKT, nuclear factor (erythroid-derived 2)-like 2 (Nrf2) and haem-oxygenase-1 (HO-1) in primary spinal cord neurons. LXA4-mediated inhibition of ferroptosis of primary spinal cord neurons was prohibited by LY294002 (AKT inhibitor), brusatol (Nrf2 inhibitor) or zinc protoporphyrin (HO-1 inhibitor). In conclusion, this work demonstrated that LXA4 exerted a neuroprotective effect in Erastin-induced ferroptosis of primary spinal cord neurons by activating the Akt / Nrf2 / HO-1 signaling pathway. Thus, this work provides novel insights into the mechanisms of action of LXA4 in ferroptosis of primary spinal cord neurons and indicates that LXA4 may be a potential therapeutic agent for SCI.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Jin Xu,Yanfei Chen,Yuanfang Tian,Zhaojie Yang,Zhixin Zhao,Wenhao Du,Xi Zhang
As a promising biodegradable resin, poly (butylene succinate) (PBS) is often blended with starch to reduce the cost. In this paper, 1-buyl-3-methylimidazolium halide pre-plasticized corn starch (CS) was blended with PBS to prepare PBS/corn starch blend material modified by ionic liquid (PBS/CS-IL). Ionic liquid (IL) acted as plasticizer and compatibilizer, and the effects of 1-butyl-3-methylimidazolium halide with different halogen anion on PBS/Starch blends were explored. The effects of IL on the structure and tensile property of PBS/Starch blends were evaluated by FTIR, SEM, DSC , TGA and XRD, respectively. Test results showed that the addition of IL significantly reduced the crystallinity of PBS/Starch blends, and the size of starch particles in the PBS matrix was also effectively reduced. IL also acted as a compatibilizer of starch and PBS, and induced the morphology of the blends to change from “sea-island” structure to homogeneous phase. The results of the tensile test showed that compared with the PBS/Starch blend without IL, the elongation at break of PBS/CS-IL increased from 22% to 93%. This study provided a simple and feasible method for the preparation of low-cost PBS bio-composite materials, and provided theoretical support for future industrial production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2020
·
IF 4.049
Yutian Lei,Xiao Liu,Li Lu,Cuihua Liu,Rongrong Xu,Shengfeng Huang,Yuan Shen,Chunping Deng,Jinchen Yu,Tingting Zhang,Jacques Crommen,Qiqin Wang,Zhengjin Jiang
There is an urgent need for developing advanced purification techniques with the merits of low cost and satisfactory capacity in order to meet the challenges in the current downstream purification of monoclonal antibodies (mAbs). Herein, a simple and inexpensive nitrogen heterocycle molecule, 1-vinylimidazole (VIM), was proposed as the capture ligand of antibodies for the first time. The corresponding VIM-based non-affinity polymeric material (polyVIM) was then fabricated via a one-step polymerization for use in the highly selective purification of antibodies. Compared to the previously reported materials, this novel material exhibited many advantages without clearly sacrificing selectivity , such as a simpler and faster fabrication (within 1.5 h), comparable or even higher binding capacity (saturated static adsorption capacity > 190 mg/g polymer, dynamic binding capacity about 31.62 mg/g polymer), lower non-specific protein adsorption, and much lower cost. Notably, the polyVIM can effectively purify the antibodies from multiple biological sources with high purity (95.4% for mAbs in the cell culture medium, 93.3% for hIgG in the human serum), with an acceptable recovery (91.6% for mAbs, 77.0% for hIgG), and good reusability (> 10 times). Moreover, the target ELISA binding assay and NFAT-luc reporter gene assay demonstrated that the enriched antibodies can well maintain their binding activity and bioactivity during the whole purification process. The excellent performance of the polyVIM material may be attributed to the high recognition ability of VIM for antibodies, as well as the biocompatible and antifouling properties of the porous polymer . This study provides a promising alternative material for the purification of mAbs in downstream processes and the enrichment of hIgG in human serum.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2020
·
IF 2.627
Xiaoda Wang,Wenkai Li,Shiwei Wang,Qinglian Wang,Ling Li,Hongxing Wang,Ting Qiu
Producing 2-ethyl-1-hexyl thioglycolate (ETE) via esterification reaction with thioglycolic acid (TGA) aqueous solution as raw material by reactive-separation coupling technology is a promising process intensification method. To choose suitable reactive-separation coupling strategy, the kinetic studies of the esterification of TGA with 2-ethyl-1-hexanol (EHL) were carried out in a batch system. The commercial ion exchange resin was employed as an eco-friendly catalyst. The effects of temperature, catalyst concentration and molar ratio were determined. It was interesting to observe that the equilibrium conversion of TGA increased with the increase of catalyst mass fraction due to the adsorption of product water onto resin surface. The activity-based pseudo-homogeneous (PH), Eley-Rideal (ER) and Langmuir-Hinshelwood-Hougen-Watson (LHHW) models were used to fit the kinetics data of the resin-catalyzed reaction. The models of ER and LHHW performed better than the PH model. The kinetics of the TGA-self-catalyzed reaction was also determined. An activity-based homogeneous kinetics model could well describe this self-catalyzed reaction. These results would be meaningful to the selection and design of an appropriate reaction-separation strategy for the production of ETE, to realize the process intensification.
✓ 已验证
DOI
高影响因子
Food & Function
·
2020
·Vol. 11
·期 12
·10852-10863
·
IF 4.171
Mingbao Gu,Jie Jin,Chenghao Ren,Ximiao Chen,Weiyang Gao,Xiangyang Wang,Yaosen Wu,Naifeng Tian,Zongyou Pan,Aimin Wu,Yifei Zhou,Xiaolei Zhang
As an ordinary joint vestigial disease, osteoarthritis (OA) contributes to a considerable proportion of disability cases worldwide. Inflammation, as the main pathological factor, mediates the occurrence and development of OA. Akebia Saponin D (ASD), also known as Asperosaponin VI, is one of the active components extracted from Dipsaci Radix and is rich in Dipsacus loose tea. It has shown sound therapeutic effects on various diseases; nevertheless, its role in OA therapy is not completely understood. This study demonstrated the anti-inflammatory activity of ASD in OA through a series of in vivo and in vitro experiments. In vitro experiments revealed that ASD might prohibit the production of inflammatory mediators in IL-1β treated chondrocytes such as COX-2, iNOS, NO, PGE2, IL-6, and TNF-α. Meanwhile, it may also inhibit the production of ADAMTS-5 and MMP13 and promote the production of Aggrecan and Collagen II. The mechanism study demonstrated that ASD exerted an anti-inflammatory effect by activating the NRF2 target, upregulating the expression of HO-1, and preventing P65 from binding to DNA. In vivo experiments demonstrated that ASD might improve the progression of OA in a DMM mouse model. These research results provide evidence for the potential application of ASD in OA therapy.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2020
·
IF 5.065
Meng Li,Yuanyong Ouyang,Wenzhong Yang,Yun Chen,Kegui Zhang,Zhaoshun Zuo,Xiaoshuang Yin,Ying Liu
This work tests the anti-corrosion ability of three imidazolium-based ionic liquids with different anions—bis(fluorosulfon)imide ([FSI] − ), bis(trifluoromethylsulfonyl)imide ([NTF 2 ] − ) and bis(pentafluoroethylsulfon)imide ([BETI] − )—on carbon steels in 1 M HCl solution at 298 K. Electrochemical impedance spectroscopy (EIS) indicated that increasing the number of –CF 2 groups in the anion vastly enhanced the corrosion-inhibition efficiency ( η ). Even at small concentrations (1.25 mM), [(OHC 2 )MIm][BETI] achieved an η of 86%. The polarisation curve verified that [(OHC 2 )MIm][BETI] acted as a mixed-type inhibitor and that its adsorption followed the EI-Away adsorption model. Scanning electron microscope (SEM) imaging intuitively confirmed the superior inhibition performance of [(OHC 2 )MIm][BETI]. X-ray photoelectron spectroscopy (XPS) showed that [(OHC 2 )MIm][BETI] was stably absorbed on the carbon-steel surface. Contact angle measurements indicated that adding the –CF 2 groups effectively decreased the hydrophilicity and surface energy of carbon steel from 69.39 to 19.93 mJ/m 2 , hindering the adsorption of water molecules. Moreover, a frontier molecular orbital theory (FMOT) study confirmed that the –CF 2 groups enhanced the donation and drawing of electrons, and molecular dynamics (MD) simulations revealed that they reduced the interaction energy (E interact ) values between the corrosion inhibitor molecule and the iron surface (from −321.08 to −612.74 kJ·mol −1 ). It was inferred that among the three ionic liquids, [(OHC 2 )MIm][BETI] absorbed most strongly to the carbon-steel surface.
✓ 已验证
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2021
·Vol. 413
·期 5
·1353-1361
·
IF 4.157
Sun Qi-Xuan,Wei Xing,Zhang Shang-Qing,Chen Ming-Li,Yang Ting,Yu Yong-Liang,Wang Jian-Hua
Copper transporter 1 (CTR1) is a transport protein involved in copper and cisplatin uptake. The visualization of cellular CTR1 migration and its redistribution is highly important in copper/cisplatin exposure/transport. However, to the best of our knowledge, this is a highly challenging task. Herein, a dual-mode imaging strategy for CTR1 is developed by hyphenating confocal laser scanning microscopy (CLSM) and laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) with a fluorescent/elemental bifunctional tag conjugated with anti-CTR1 antibody. The tag consists of rhodamine B and zirconium metal-organic frameworks (Zr-MOF) for CLSM fluorescence imaging and LA-ICPMS element imaging for a same group of HepG2 cells in a designated visual zone. This dual-mode imaging strategy facilitates visualization of CTR1 migration and meanwhile provides information of CTR1 redistribution in HepG2 cells by uptake of divalent copper or cisplatin. The present dual-mode imaging strategy provides in-depth information for the elucidation of CTR1 involved biological processes.
Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESALINATION
·
2021
·
IF 9.501
Wenwei Zhong,Yingnan Zhao,Shunquan Chen,Jialun Zhong,LiWei Guo,Dongyang Zheng,Chun Xie,Chao Ji,Yi Guo,Guangxi Dong,Fengyuan Zhang,Alicia An,Shaoping Li,Sheng Li
TCM wastewater treatment is a significant environmental issue in China. This study investigated the effectiveness of the UF-MD hybrid system on recycling valuable resources in TCM wastewater. Synthetic TCM wastewater was prepared and separated with the self-assemble UF-MD hybrid system. Moreover, the feed temperature (45 °C, 55 °C, 65 °C) and membrane materials' influence on MD performance were also evaluated. Results show that the UF-MD hybrid system is efficient to achieve a complete separation and resources recycle from the TCM wastewater. The MD flux production increased with the increment of feed temperature. However, some bioactive compounds could not be concentrated in MD due to their potential degradation at high temperatures, and membrane wetting might be an issue in long-term operation. Although PP membranes exhibited the highest flux among PP , PTFE and PVDF membranes, considering the wetting and fouling resistance , PTFE membranes would be a better option for long-term MD operation at 65 °C.
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2020
·Vol. 10
·期 2
·211
·
IF 3.52
Yongxin Zhang,Long Lin,Xiaoming Zheng,Chunyan Liu,Quanren Zhu,Hongchen Guo
In this study, a series of SnO2modified zeolite catalysts (Snx-S-1; x is the weight percentage of Sn) were prepared with SnCl2and a defective Silicalite-1 (S-1) zeolite via facile deposition–precipitation method. It was found that the stannic species modified all-silica zeolite catalysts were active for the intermolecular condensation of ethylenediamine (EDA) to 1, 2-Diazabicyclo [2, 2, 2] octane (TEDA) and piperazine (PIP). The best catalyst Sn6-S-1 (6 wt.% Sn loading) showed 86% EDA conversion and 93% total selectivity to TEDA and PIP. By contrast, the defective S-1 zeolite parent showed only approximately 9% EDA conversion under the same conditions. With the help of catalyst characterization techniques including hydroxyl vibration and pyridine adsorption FT-IR spectroscopy (transmission mode), the enhancement of the catalytic activity of the SnO2modified zeolite catalysts (Snx-S-1) was mainly attributed to the formation of mild Lewis acid sites in the siliceous zeolite. Both the hydroxyl nests of the defective S-1 zeolite and the dispersed SnO2clusters should be the important factors for the formation of mild Lewis acid sites on the modified zeolite. Based on the catalytic performance of the modified zeolite in the conversion of EDA to PIP and TEDA, it is inferred that the mildly acidified defective S-1 zeolite by the SnO2deposition modification might become a very active and durable catalyst for reactions involving strongly alkaline reactants and products.Keywords:defective Silicalite-1;SnO2modification;acidity;condensation of ethylenediamine
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Huachu Wu,Liang Shen,Zhu Zhu,Xusong Luo,Yishu Zhai,Xiaobin Hua,Shicheng Zhao,Lian Cen,Zhibing Zhang
This study was to co-encapsulate a chemokine (stromal cell-derived factor-1, SDF-1) and a chondroinductive molecule (kartogenin, KGN) within microspheres via microfluidics, and to incorporate them into a hyaluronic acid (HA) injectable scaffold for articular cartilage defect repair. HA injectable scaffold, as a cartilage-friendly microenvironment, was prepared by crosslinking HA with 1,4-butanediol diglycidyl ether. A microfluidic device was set up to prepare monodisperse PLGA microspheres (49 μm) to load SDF-1 and KGN. An in vivo model of full-thickness articular cartilage defects in rabbits was applied to evaluate the reparative capacity of the current package. The SDF-1 and KGN were co-encapsulated simultaneously within the core and shell area of the microsphere with high loading efficiency and sustained release profiles of more than 2 months. The release profiles of them were highly matched and well fitted to a first-order mathematical model. These microspheres when incorporated into HA injectable scaffold were demonstrated to heal the full-thickness articular cartilage defects in rabbits. The regenerated tissue had the typical cartilage histological characters and integrated well with the surrounding tissue at 12w. This developed cell-free system could serve as an efficient therapy for articular cartilage defects treatment, serving as a supplementary way to cell based therapies.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 19
·9813-9824
·
IF 11.301
Yue Li,Jian Song,Mengting Jiang,Mbage Bawa,Xiaohong Wang,Yuyang Tian,Guangshan Zhu
Na5[IMo6O24]·3H2O and a porous aromatic framework (iPAF-1) were used to build an off-the-shelf building material (IMo6@iPAF-1) to realize the highly efficient oxidation of organic sulfurs like oxygenase. The synergy between IMo6 and iPAF-1 resulted in a higher BET surface area, hydrophobic microenvironment, and redox sites to show higher activity in aerobic oxidative desulfurization with almost 100% removal of model organic sulfurs under atmospheric pressure with almost 246 times higher TOFs compared to IMo6. It also showed efficiency in the desulfurization of gasoline and diesel to give very low S contents of 7.1 and 7.6 ppm with 99.3% and 99.4% removal, respectively, at 100 °C for 6 h. More importantly, IMo6@iPAF-1 could also catalyze desulfurization using concentrated O2 mixed with N2 or air instead of pure O2 with better safety and economics, while as low as 4.9 and 6.9 ppm S contents were achieved for gasoline and diesel, respectively. The special surroundings of IMo6@iPAF-1 repelled the sulfone product and allowed it to perform with the same efficiency when recycled without any treatment of the used catalyst.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 17
·7065-7070
·
IF 3.288
Wanqing Zhang,Shaohua Wei,Wenlong Tang,Kang Hua,Cheng-xing Cui,Yalei Zhang,Yuping Zhang,Zheng Wang,Shouren Zhang,Lingbo Qu
A superhydrophobic copper foam (CF) with excellent robustness and durability was successfully fabricated by using an in situ growth method combined with surface hexadecanethiol (HDT) modification of HKUST-1/CF. The wettability mechanism for the conversion of the superhydrophilic to superhydrophobic states was clarified and explored via density functional theory (DFT). The as-prepared HKUST-1/HDT/CF surface possessed good superhydrophobicity under the optimal conditions including the mass ratio of copper nitrate trihydrate (Cu(NO3)2·3H2O) to 1,3,5-benzenetricarboxylicacid (H3BTC), HDT immersion time, in situ growth time and hydrothermal reaction temperature. The superhydrophobic surface can maintain a desirable hydrophobic state after immersing in different pH solutions, abrasion of weight, and continuous ultrasonic testing. The highest water contact angle (WCA) value of the obtained samples was 162.9° under the aforementioned harsh conditions. Additionally, the superhydrophobic CF has a bright future in the field of oil/water separation due to the obtained HKUST-1/HDT/CF surface with excellent water-repellent performance.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）