TALANTA
·
2016
·
IF 4.035
Yonghua Xiao,Rong Xiao,Jian Tang,Qiankun Zhu,Xiaoming Li,Yan Xiong,Xuewen Wu
The molecularly imprinted polymers (MIP) were prepared via aqueous RAFT precipitation polymerization, with aristolochic acid I (AAI) as the template molecule, AA as the functional monomer , EGDMA as the cross-linker, AIBN as the chain initiator, CTP as the chain transfer agent and 80% (g/g) DMF-aqueous solution as the porogen . The differential UV–vis spectra revealed that a cooperative hydrogen-bonding complex between AAI and AA might be formed at the molar ratio of 1:3 in prepolymerized system. The synthesized MIPs were characterized by FTIR spectra, solid UV–visible absorption spectra, nitrogen adsorption-desorption isotherms and scanning electron microscope, which proved that the MIPs and NIPs have the similar chemical structures and the adding of AAI could affect the size and morphology of the microspheres . UV–visible absorption spectra and High-performance liquid chromatography (HPLC) was used to investigate the adsorption and recognition properties of the MIPs. The Scatchard isotherm model described that the binding sites independently acted. The Langmuir isotherm model suggested an excellent imprinting effect owing to the presence of a large number of specific binding sites on the MIP. The Freundlich model indicated that the AAI could be readily absorbed by MIP. Selective absorption of the template molecule was demonstrated in presence of its analogous compounds, benzoic acid and nitrobenzene . The recycling experiments implied that the MIP could be reused to further selective recognition and separation to AAI for six times at least. MIP was developed for removal of AAI from the Aristolochia manshuriensis extraction. The results indicated that 25 mg of MIP could remove the AAI below the HPLC detection limits (6.47 ng mL -1 ) from 5.0 mL of the extraction (CAAI=0.0018 mg mL -1 ) with the recovery of AAI to 91.50% (n=3, SD=4.24%). Therefore, it is clearly revealed that the MIP can be a useful tool to remove toxic compounds from natural products .
研究领域:
分析化学
·
药物化学
·
环境科学
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2019
·Vol. 186
·期 5
·1-8
·
IF 5.479
Tan Xiaofeng,Zhang Lianhua,Tang Qiaorong,Zheng Gengxiu,Li He
A nanozyme-linked immunosorbent assay is described for cardiac troponin I which is a biomarker for myocardial infarction. The method is based on the use of Pd-Ir nanocubes with excellent peroxidase-like activity. The nanocubes catalyze the oxidization of nonfluorescent o-phenylenediamine (OPD) by H 2 O 2 to form a yellow fluorescent product (oxOPD) with excitation/emission maxima at 400/570 nm. Carbon dots are added as a reference fluorophore. Under the same excitation wavelength, they display blue fluorescence (450 nm). The ELISA uses the Pd-Ir nanocubes as a label for the secondary antibody and OPD as substrate. The ratio of fluorescence intensities at 570 and 450 nm increases in the 1 pg·mL −1 to 1 ng·mL −1 cardiac troponin I concentration range, and the detection limit is 0.31 pg·mL −1 . The method was applied to analyze spiked serum samples, and the results compared well with those obtained by a commercial chemiluminescence assay.
Schematic presentation of the ratiometric fluorescence immunoassay for cardiac troponin-I. Pd-Ir nanocubes were employed to fabricate nanozyme-based signal labels for its excellent peroxidase-mimicking activity.
研究领域:
生物化学
·
医学诊断
·
纳米技术
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2021
·
IF 4.821
Yujie Han,Xujie Su,Lifang Fan,Zhiguang Liu,Yujing Guo
Cardiac troponin I (cTnI) is a “gold standard biomarker” for clinical diagnose of acute myocardial infarction (AMI) . Rapid, accurate, and sensitive detection methods for cTnI are highly urgent and significant in early diagnosis and progression control. In this work, we proposed an electrochemical aptasensing platform for cTnI detection based on copper nanowires/molybdenum disulfide/reduced graphene oxide (CuNWs/MoS 2 /rGO) ternary nanostructure. The CuNWs/MoS 2 /rGO composite exhibited improved electrochemical activity due to the high electrochemical conductivity and the synergistic effect among each component, and the large surface area, which also facilitates the immobilization of aptamers. As a result, the constructed electrochemical cTnI aptasensor shows good selectivity, stability, and reproducibility towards cTnI. Under optimized conditions, the aptasensor responses cTnI linearly from 5.0 × 10 −13 to 1.0 × 10 −10 g mL −1 with a detection limit of 1.0 × 10 −13 g mL −1 (S/N = 3). The analysis of cTnI in human blood samples demonstrated its practicability with comparable results. This work offers an alternative way for facile fabrication of CuNWs/MoS 2 /rGO based aptasensor for clinical biomarker detection.
研究领域:
生物医学工程
·
分析化学
·
心血管疾病诊断
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Sheng Zhang,Zhenyang Liu,Linlin Mao,Jian Wu,Di Zhang,Ruiyuan Liu,Li Qi
High quality visualization of live mammalian embryo is an important requirement for studying fetal development. Photoacoustic tomography (PAT) and optical coherence tomography (OCT) are two advanced imaging modalities that have been utilized for embryonic imaging separately. However, high contrast, multiscale, and deep tissue imaging of embryos in vivo remains challenging. Here, we demonstrate multimodal contrast-enhanced imaging of live embryos by gold nanostar-meditated near-infrared I (NIR-I) PAT and near-infrared II (NIR-II) OCT. We investigate intravenous and intravaginal administration of gold nanostars, and significant enhancement of signal, image contrast, and imaging depth are achieved for both PAT and OCT. Our findings may facilitate detailed studies of the morphological and functional changes during embryonic development.
研究领域:
生物医学工程
·
成像科学
·
发育生物学
✓ 已验证
产品关联
DOI
高影响因子
iScience
·
2023
·Vol. 26
·期 4
·106461-106461
·
IF 5.8
Shuaibo Zhai,Jiaqi Gong,Yifei Feng,Zhongbao Que,Weiwei Mao,Xuemin He,Yannan Xie,Xing’ao Li,Liang Chu
Memristors are promising information storage devices for commercial applications because of their long endurance and low power consumption. Particularly, perovskite memristors have revealed excellent resistive switching (RS) properties owing to the fast ion migration and solution fabrication process. Here, an n-i-p type double perovskite memristor with "ITO/SnO 2 /Cs 2 AgBiBr 6 /NiO x /Ag" architecture was developed and demonstrated to reveal three resistance states because of the p-n junction electric field coupled with ion migration. The devices exhibited reliable filamentary with an on/off ratio exceeding 50. The RS characteristics remained unchanged after 1000 s read and 300 switching cycles. The synaptic functions were examined through long-term depression and potentiation measurements. Significantly, the device still worked after one year to reveal long-term stability because of the all-inorganic layers. This work indicates a novel idea for designing a multistate memristor by utilizing the p-n junction unidirectional conductivity during the forward and reverse scanning.
研究领域:
材料科学
·
电子工程
·
纳米技术
✓ 已验证
DOI
PubMed
高影响因子
ANALYST
·
2013
·Vol. 138
·期 9
·2592-2597
·
IF 3.969
Shao-Kai Sun,Bei-Bei Wang,Xiu-Ping Yan
Owing to the biological and clinical significance of deoxyribonuclease I (DNase I), it is highly desirable to develop near-infrared (NIR) fluorescent assays for the determination of DNase I activity. Here we report a label-free NIR fluorescent assay for selective determination of DNase I activity based on malachite green (MG)/G-quadruplexes. In the presence of Na+ or K+, single stranded DNA (ssDNA) is able to form a G-quadruplex structure, thus to increase the rigidity of MG structure and result in a remarkable NIR fluorescence. As DNase I is capable of cleaving all types of DNA indiscriminately to release nucleotide products, the G-quadruplexes are cleaved into oligonucleotides in the presence of DNase I. As a result, the rigidity of MG structure is reduced, and the NIR fluorescence of the solution decreases with increase of DNase I activity, providing a useful platform for low-cost, label-free and convenient detection of DNase I activity. Under the optimum conditions, the proposed label-free NIR fluorescent assay gave a detection limit of 1 u mL−1, and a relative standard deviation of 3.2% for eleven replicate detections of 50 u mL−1 DNase I. The proposed assay was applied to the determination of DNase I activity in spiked human urine samples with recoveries from 99.1 to 109.0%.
研究领域:
生物化学
·
临床检验
✓ 已验证
DOI
高影响因子
JOURNAL OF PHARMACY AND PHARMACOLOGY
·
2016
·Vol. 68
·期 6
·751-761
·
IF 2.363
Rongbin Huang,Lei Xiang,Ying Liu,Xiangping Deng,Xuan Cao,Lanfang Li,Cuiyun Yu,Yanming Chen,Guotao Tang
ObjectivesTo develop an acid trigger release of antitumour drug delivery carriers, pH-sensitive amphiphilic poly (ethyleneglycol)-imine-benzoic-dipalmitate (PEG-I-dC16) polymers were designed and synthesized and the drug-loaded micelles were evaluated in vitro.MethodsPEG-I-dC16 synthesized by Schiff base synthetic method and characterized by 1H-NMR. To determine the drug-loading capacity, doxorubicin (DOX) was encapsulated in the micelles using membrane dialysis method. Zeta potential, particle size, drug-loading capacity, in vitro drug release in different pH conditions and cytotoxicity evaluation of micelles were carried out comparing with non-acid liable PEG–amide–benzoic–dipalmitate (PEG-A-dC16) polymers micelles. The cellular uptake and intracellular distribution of DOX were detected by flow cytometry and confocal laser scanning microscope.Key findingsDrug-loading capacity and encapsulation efficiency of micelle (PEG molecular weight 2k) were 12.7 ± 1.1% and 49.8 ± 2.2%, respectively. The average particle size was 72.3 ± 2.5 nm. The DOX release rate of PEG-I-dC16 micelles is much higher at pH 6.5 than at pH 7.4. DOX cellular uptake and nuclear accumulation of PEG-I-dC16 micelles were more efficiency than that of PEG-A-dC16 micelles.ConclusionThe pH-sensitive PEG-I-dC16 micelles could be a promising drug delivery system for anticancer drugs.
研究领域:
药学
·
化学
·
肿瘤学
·
药物递送系统
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2022
·Vol. 23
·期 11
·6326
·
IF 6.208
Ting Sun,Xian Li,Xiaochuan Jin,Ziyi Wu,Xiachao Chen,Jieqiong Qiu
Graphene oxide is well known for its excellent fluorescence quenching ability. In this study, positively charged graphene oxide (pGO25000) was developed as a fluorescence quencher that is water-soluble and synthesized by grafting polyetherimide onto graphene oxide nanosheets by a carbodiimide reaction. Compared to graphene oxide, the fluorescence quenching ability of pGO25000 is significantly improved by the increase in the affinity between pGO25000 and the DNA strand, which is introduced by the additional electrostatic interaction. The FAM-labeled single-stranded DNA probe can be almost completely quenched at concentrations of pGO25000 as low as 0.1 μg/mL. A simple and novel FAM-labeled single-stranded DNA sensor was designed for Hg2+detection to take advantage of exonuclease I-triggered single-stranded DNA hydrolysis, and pGO25000 acted as a fluorescence quencher. The FAM-labeled single-stranded DNA probe is present as a hairpin structure by the formation of T–Hg2+–T when Hg2+is present, and no fluorescence is observed. It is digested by exonuclease I without Hg2+, and fluorescence is recovered. The fluorescence intensity of the proposed biosensor was positively correlated with the Hg2+concentration in the range of 0–250 nM (R2= 0.9955), with a seasonable limit of detection (3σ) cal. 3.93 nM. It was successfully applied to real samples of pond water for Hg2+detection, obtaining a recovery rate from 99.6% to 101.1%.Keywords:positively charged graphene oxide (pGO);exonuclease I;fluorescence quencher;hairpin structure;T–Hg2+–T
研究领域:
生物化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Food Science & Nutrition
·
2021
·Vol. 9
·期 7
·3722-3731
·
IF 2.863
Lin Zhu,Yingjuan Liu,Xiaolin Wu,Yuqian Ren,Qinghua Zhang,Leiming Ren,Yunliang Guo
Cerebroprotein hydrolysate-I (CH-I)，a mixture of peptides extracted from porcine brain tissue，has shown a neuroprotective effect, but its role in brain senescence is unclear. In the present study, we established a senescence model of PC12 cells and mice to investigate the effect of CH-I on brain senescence via JAK2/STAT3 pathway. The results showed that CH-I could improve cell viability, inhibit the apoptosis of cells, and reduce the senescence-positive cells induced by D-galactose. In vivo , CH-I improved the learning ability and memory of aging mice, reduced neuronal damage in mice hippocampus. Mechanism studies showed that CH-I could adjust BDNF protein expressions, activate JAK2/STAT3 pathway, and finally enhance telomerase activity. All these findings indicated that CH-I showed a neuroprotective effect against brain senescence. These results might provide further reference and support for the application of CH-I in delaying aging.
研究领域:
神经科学
·
衰老研究
·
药理学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Keyi Gu,Yongmin Duan,Shugang Li,Ying Tian,Juan Du,Junjie Zhang
In recent years, inorganic perovskite quantum dots (PQDs) have garnered significant attention, but the photoluminescence (PL) properties and stability of red-emitting PQDs need to be further enhanced. In this work, the precipitation of CsPb(Br/I) 3 quantum dots into borosilicate glass was effectively enabled by the high-temperature melt-quenching method. With the B 2 O 3 /SiO 2 ratio increased, the glass network structure gradually loosened, which enhanced the precipitation of PQDs. Simultaneously, the PL intensity of CsPb(Br/I) 3 PQDs glass increased, with a near twentyfold rise in the photoluminescence quantum yield (PLQY). The variable temperature test of PQDs glass shows that PQDs glass has good thermal stability. Finally, a red-emitting LED and a WLED were prepared by using the prepared red-emitting CsPb(Br/I) 3 PQDs glass. This paper serves as a reference for incorporating red-emitting CsPb(Br/I) 3 PQDs glass into WLED development.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of the American Chemical Society
·
2017
·
IF 13.858
Senyun Ye,Haixia Rao,Ziran Zhao,Linjuan Zhang,Hongliang Bao,Weihai Sun,Yunlong Li,Feidan Gu,Jianqiang Wang,Zhiwei Liu,Zuqiang Bian,Chunhui Huang
It is extremely significant to study the trap state passivation and minimize the trap states of perovskite to achieve high-performance perovskite solar cells (PSCs). Here, we have first revealed and demonstrated that a novel p-type conductor Cu(thiourea)I [Cu(Tu)I] incorporated in perovskite layer can effectively passivate the trap states of perovskite via interacting with the under-coordinated metal cations and halide anions at the perovskite crystal surface. The trap state energy level of perovskite can be shallowed from 0.35–0.45 eV to 0.25–0.35 eV. In addition, the incorporated Cu(Tu)I can participate in constructing the p–i bulk heterojunctions with perovskite, leading to an increase of the depletion width from 126 to 265 nm, which is advantageous for accelerating hole transport and reducing charge carrier recombination. For these two synergistic effects, Cu(Tu)I can play a much better role than that of the traditional p-type conductor CuI, probably due to its identical valence band maximum with that of perovskite, which enables to not only lower the trap state energy level to a greater extent but also eliminate the potential wells for holes at the p–i heterojunctions. After optimization, a breakthrough efficiency of 19.9% has been obtained in the inverted PSCs with Cu(Tu)I as the trap state passivator of perovskite.
研究领域:
材料科学
·
光伏技术
·
能源研究
✓ 已验证
DOI
PubMed
高影响因子
Biomedicines
·
2023
·Vol. 11
·期 7
·2030
·
IF 4.7
Jie Zhao,Geng Tian,Haibin Qu
The continuous twin-screw wet granulation (TSWG) process was investigated and optimized with prediction-oriented I-optimal designs. The I-optimal designs can not only obtain a precise estimation of the parameters that describe the effect of five input process parameters, including the screw speed, liquid-to-solid (L/S) ratio, TSWG feed rate, and numbers of the 30° and 60° mixing elements, on the granule quality in a TSWG process, but it can also provide a prediction of the response to determine the optimum operating conditions. Based on the constraints of the desired granule properties, a design space for the TSWG was determined, and the ranges of the operating parameters were defined. An acceptable degree of prediction was confirmed through validation experiments, demonstrating the reliability and effectiveness of using the I-optimal design method to study the TSWG process. The I-optimal design method can accelerate the screening and optimization of the TSWG process.Keywords:twin-screw wet granulation (TSWG);I-optimal design;continuous manufacturing;process understanding;design space
研究领域:
制药工程
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）