文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第241至252个,产品总数349个

设置提升方向
R
MICROCHEMICAL JOURNAL · 2024 · IF 4.9

Improved enantioselective permeation in cellulose membrane-supported metal–organic framework via polyvinylpyrrolidone as the pore-forming agent

Jinfan Li,Chunyan Liu,Xinwen Jia,Mengyun Lu,Ajuan Yu,Benlai Wu

Chiral membranes have limited permeability and selective trade-off, which has been a major problem in chiral membrane separations. To address this issue, the carboxylated cellulose (CC) membranes were prepared with small pore size and low resistance substrate by regulating the amount of polyvinylpyrrolidone (PVP) and casting solution, and the CC@CuLBH composite membrane with chiral separation capability was fabricated by in situ formation of well-dispersed [Cu( L -mal)(Bipy)]·H 2 O (CuLBH) with the carboxyl group on the surface of CC membrane as the metal anchor points. Under the optimal conditions, the CC@CuLBH membrane showed good chiral separation ability with an ee value of 60% for R -1-(1-naphthyl)ethanol ( R -NE). Compared with the CC/CuLBH membrane formed by physical blend, the CC@CuLBH membrane exhibited improved enantioselective permeation for R -NE enantiomer. Both the unique chiral microenvironment of CuLBH and the regular pore structure of CC membrane, in addition to their synergistic effects resulted in the highly permeable and enantioselectivity for the CC@CuLBH composite membrane, which broadened the preparation method of chiral membrane.

研究领域: 材料科学 · 化学工程 · 分离技术
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF APPLIED POLYMER SCIENCE · 2015 ·Vol. 132 ·期 18 · IF 1.768

Synthesis and stability research of reproducible aqueous polyurethane micelles with low de-blocking temperature

Hongchuan Wu,Zhiguo Li,Libin Zhu,Jiyou Gu

Aqueous polyurethane micelles from 2,4,6-trichlorphenol blocking terminal-isocynate pre-polymer were prepared which could be de-blocked at low temperature. The prepared aqueous blocked polyurethane micelles (BPUMs) were uniform and spherical micro-particles. The particle size was decreased with increase of the DMPA content, while it was enlarged at first and then gradually decreased by increasing R -value. The stability of the micelles was affected by the R value, blocked efficiency and DMPA content. HDI-BPUMs were more stable than HDI-BPUMs at the same condition. The stability was further researched by the zeta potential combining with technique and viscosity tracking method, and the initial zeta potential be used as the stability criterion. In addition, a stabilization mechanism of the micelles was proposed. TCP-blocked TDI-BPUMs could be initially de-blocked at about 75°C and TCP-blocked HDI-BPUMs was de-blocked at about 80°C. The de-blocking temperature could be further reduced in the presence of catalyst, but it was scarcely affected by the change of R -value and DMPA content. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41908

研究领域: 高分子化学 · 胶体与界面科学 · 材料化学 · 功能材料 · 纳米材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Biomaterials Science & Engineering · 2022 · IF 5.395

Hypothermia-Triggered Mesoporous Silica Particles for Controlled Release of Hydrogen Sulfide to Reduce the I/R Injury of the Myocardium

Wenyi Xia,Tao Yan,Lianlei Wen,Shijie Zhu,Wang Yin,Miao Zhu,Meidong Lang,Chunsheng Wang,Changfa Guo

Despite the fact that heart transplantation (HTx) is a relatively mature procedure, heart ischemic and reperfusion (I/R) injury during HTx remains a challenge. Even after a successful operation, the heart will be at risk of primary graft failure and mortality during the first year. In this study, temperature-sensitive polymer poly(N-n-propylacrylamide-co-N-tert-butyl acrylamide) (PNNTBA) was coated on diallyl trisulfide (DATS)-loaded mesoporous silica nanoparticles (DATS-MSN) to synthesize hypothermia-triggered hydrogen sulfide (H2S) releasing particles (HT-MSN). Because the PNNTBA shell dissolves in phosphate-buffered saline at 4 °C, the loaded DATS could continuously release H2S within 6 h when activated by glutathione (GSH). Furthermore, after co-culturing biocompatible HT-MSN with cardiomyocytes, H2S released from HT-MSN at 4 °C was found to protect cardiomyocytes from ischemic and reperfusion (I/R) injury. In detail, the rate of cell apoptosis and lactate dehydrogenase activity was decreased, as manifested by increased BCL-2 expression and decreased BAX expression. More importantly, in an isolated heart preservation experiment, HT-MSN demonstrated potent protection against cardiac I/R injury and reduced expression of inflammatory factors TNF-α and IL-1β. This study provided a new method for the controlled release of H2S by the donor and myocardial protection from I/R injury.

研究领域: 药理学 · 纳米技术 · 心脏病学 · 生物医学工程
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2024 · IF 4.9

Preparation polymer-grafted magnetic starch adsorption material St/Fe3O4-g-p(GMA-r-HEMA) used for removal of heavy metals

Chengmin Hou,Weimin Yan,Hanxiao Ma,Yuan Bai,Zhiting Yuan

Heavy metal ion (Cu(II)) wastewater will do great harm to human body and environment, and the adsorption materials used in traditional adsorption methods are easy to hydrolyze, resulting in secondary pollution to water. In this paper, an adsorption material poly(glycidyl methacrylate-random-hydroxyethyl methacrylate) grafted ferric oxide@starch (St/Fe 3 O 4 - g -p(GMA- r -HEMA)) was prepared, which had epoxy and hydroxyl group , easy to produce crosslinking, reduce the sensitivity of starch to pH and prevent hydrolysis. Infrared spectroscopy (FTIR), thermogravimetric analysis (TG), scanning electron microscopy (SEM) and magnetometer (VSM) were used to characterize the structure and morphology of the adsorbent. The adsorption properties of the adsorbent for removal of Cu(II) ions were studied via changing the experimental conditions, including the amount of adsorbent, Cu(II) ions solution concentration, pH value, adsorption time, adsorption temperature and so on. Under the optimal adsorption conditions of pH value 7, initial Cu(II) concentration 20 mg/L and adsorption time 160 min, the maximum unit adsorption capacity of St/Fe 3 O 4 - g -p(GMA- r -HEMA) was 94.15 mg/g, and the adsorption performance was good. The adsorption process followed Langmuirm model and second-order kinetic model , and was dominated by chemisorption . The thermodynamic model showed that the adsorption process of St/Fe 3 O 4 - g -p(GMA- r -HEMA) was endothermic. After 8 adsorption cycles, 93.5% of the first adsorption effect can still be retained, and the renewable performance had been improved.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Cleaner Production · 2026 · IF 10.7

Efficient recovery of high-purity 2D flaky R-FePO4 from lithium extraction slag leachate via solvent extraction and chemical precipitation

Haojie Mu,Lei Hu,Ying Sun,Yongping Liu

The recycling of spent lithium iron phosphate batteries (LFPs) has enormous market potential and great significance for environmental protection and sustainable development. Notably, lithium extraction slag (LES) recovery is a critical link in the full-process recycling of spent LFPs, while existing technologies are often limited by low impurity separation efficiency, poor environmental compatibility, or high costs. Herein, this study innovatively integrated solvent extraction with LES recovery and proposed a method for efficient impurity separation and preparation of high-purity 2D flaky regenerated iron phosphate (R-FePO 4 ). Three extractant systems were evaluated for purifying LES leachate, and TBP-kerosene was identified as the optimal extractant composition with corresponding optimal operating conditions determined. Fe and P could be co-extracted, and under conditions of 80% TBP volume fraction ( φ TBP  = 80%), 60 s extraction time, and initial phase ratio R  = 3, their single-stage extraction efficiencies reached approximately 99.20% and 38.50%, respectively, with excellent impurity separation performance. After cascaded extraction, the maximum extraction efficiencies of Fe and P reached 100% and 82.60%, respectively. McCabe-Thiele diagrams for Fe and P were constructed to determine the theoretical number of stripping stages. After three-stage countercurrent stripping, the maximum mass concentrations of Fe and P in the stripping solution reached 29.20 and 17.23 g L −1 , respectively, while contents of impurities (Al, Ni, Co, Mn, Cu, Ti) remained extremely low. HCl and R-FePO 4 were recovered from the stripping solution via evaporation and chemical precipitation, respectively. XRD, FT-IR, SEM, and EDS characterizations verified that the product was 2D flaky FePO 4 . Chemical titration and ICP-OES analysis showed the Fe/P molar ratio of R-FePO 4 was 0.969, and its impurity content met requirements of multiple standards simultaneously. Collectively, these results confirm the successful recovery of high-purity 2D flaky R-FePO 4 from LES via this method, with the comprehensive recovery rates of Fe and P reaching nearly 100%. Cyclic performance tests of the extractant demonstrate its excellent regenerative performance. The economic and environmental performance of the proposed process was evaluated, revealing its enormous industrial application potential. Eventually, a novel technical process is provided for the LES recycling industry to achieve maximum resource utilization.

CAS / MDL: 126-73-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING · 2026 ·Vol. 132 ·期 9 ·968 · IF 3

Hierarchically Engineered NiSnSe₂@r-GO@Ni-MOF Composite as a Bifunctional Electrode for High-Performance Supercapacitors and Hydrogen Evolution Reaction

Shahbaz Muhammad Ali Hamza,Nasir Hamid,Afzal Amir Muhammad,Imran Muhammad,Chine Zied,Mumtaz Sohail,Kumar Abhinav,Kamran Muhammad Arshad

Developing multifunctional electrode materials that integrate high energy storage capacity with catalytic activity is essential for next-generation energy systems. Herein, a hierarchically engineered NiSnSe₂@r-GO@Ni-MOF composite was synthesized by the use of a two-step hydrothermal process, combining the high conductivity of r-GO, the porous framework of Ni-MOF, and the redox activity of NiSnSe₂. Structural and morphological investigations (SEM, XRD, Raman, XPS, and BET–BJH) confirmed the formation of a well-integrated mesoporous architecture with a large available electroactive sites and effective electron–ion transport. Electrochemical evaluation exhibited a high specific capacity of 1297.8 C g⁻¹. The assembled asymmetric device (NiSnSe₂@r-GO@Ni-MOF//AC) achieved an energy density of 44.8 Wh kg⁻¹ and a power density of 1120 W kg⁻¹, with 90% capacity retention over 7,000 cycles. Additionally, the composite exhibited excellent HER response and delivered a low overpotential of 49 mV and a Tafel slope of 52 mV dec⁻¹. The boosted bifunctional enactment is accredited to strong interfacial coupling and stabilizes the electrode structure, which highlights a scalable strategy for designing efficient multifunctional heterostructure to overcome the energy crisis in the present era.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2023 ·Vol. 13 ·期 17 ·11728-11732 · IF 3.9

A thermochromic poplar-based tetradecyl ester/methyl composite encapsulated with PEG400–SiO2 (PS-R-PTC) for improving thermal energy storage

Yanqiang Tong,Weihua Zou,Delin Sun,Zhangheng Wang

Thermochromic wood is an important research direction for wood modification in recent years, and a red poplar-based thermochromic composite (R-PTC) had been prepared in our previous study by compositing a mixture of phase change reagents (tetradecyl ester: C28H56O2 and methyl red: C15H15N3O2) and full poplar wood. In order to improve the heating storage ability of R-PTC and encapsulating phase change reagents to prevent leakage, a new R-PTC composite (PS-R-PTC) was prepared by encapsulated R-PTC with polyethylene glycol 400 (PEG400)–SiO2 in this work. Compared to the original R-PTC samples, the cell walls of PS-R-PTC were not significantly changed by the SiO2 film and we also found that PS-R-PTC with PEG400 (90%)–silica solutions (10%) mixture had better heat storage performance and PS-R-PTC (90%) has better enthalpy change value (R-PTC: 43.01 J g−1; PS-R-PTC (90%): 71.82 J g−1). The PS-R-PTC can show the function of thermal energy storage, which is used in wooden buildings and can be a feasible insulating material for reducing thermal energy losses and hence reducing energy usage. In PS-R-PTC, SiO2 combines with the –OH of the R-PTC and the –OH of PEG400 (HO(CH2CH2O)nH), and these –OH lose hydrogen ions too.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS & DESIGN · 2023 · IF 8.4

Construction of nicotinic acid curcumin nanoparticles and its Anti-atherosclerosis effect via PCSK9/LDL-R, ABCA1/Caveolin-1/LXR pathway

Chao-ping He,Wen-juan Quan,Ya-ling Zeng,Hong-yan Zhou,Pei-dong You,Zhen-xian Li,Ya-mei Li,Li-mei Lin,Bin Liu,Duan-fang Liao,Qin-hui Tuo

Reducing lipid uptake of macrophages and stimulating cholesterol efflux are two necessary steps for atherosclerotic plaque regression. In this study, a compound of curcumin nicotinate (CN) was synthesized from nicotinic acid which can raise raising high-density lipoprotein (HDL) and curcumin which can lower lipid. However, the shortcomings of CN, such as poor water solubility and low bioavailability, limit its clinical application. In this article, a CN loaded biomimetic nanosystem was constructed by using Prussian blue nanoparticles (PB NPs) to improve its solubility, thereby changing its administration route. In addition, hyaluronic acid (HA) modification on the biomimetic PB NPs was adopted to prolong circulation time and improve the accumulation of drugs in the plaque region. Mechanism studies have shown that the constructed nanosystem could exert anti-AS effects through the pathway of Proprotein Convertase Subtilisin/Kexin Type 9(PCSK9) /Low-density lipoprotein receptor (LDL-R), ATP Binding Cassette Transporter A1(ABCA1) /Caveolin-1 /Liver X Receptor (LXR). These findings indicated that the designed nano-platform is expected to be used for prevention and targeted therapy of atherosclerosis.

CAS / MDL: 458-37-7 59-67-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
EUROPEAN JOURNAL OF MEDICINAL CHEMISTRY · 2022 · IF 7.088

In vitro and in vivo biological evaluation of newly synthesized multi-target 20(R)-panaxadiol derivatives for treating Alzheimer's disease

Lei Pang,Jin Li,Zheng Liu,Yin-Sheng Quan,He Huan Sui,Yi Jia,Fener Chen,Jung Joon Lee,Peng Liu,Zhe-Shan Quan,Qing-Kun Shen,Hong-Yan Guo

An extensive study was performed to discover a series of novel 20( R )-panaxadiol derivatives with various substituents at the 3-OH position as nontoxic, brain-permeable, multi-target leads for treating Alzheimer's disease . In vitro analysis revealed that a compound bearing benzyl-substituted carbamate , which we denoted compound 14a , exhibited the most potent neuroprotective activity, with an EC 50 of 13.17 μM. The neuroprotective effect of compound 14a was slightly more potent than that of donepezil and much more potent than that of 20( R )-panaxadiol. Compound 14a at 7.5–120 μM exhibited low toxicity in various cell lines. In addition, compound 14a exhibited a wide range of biological activities , including inhibiting apoptosis ; inducing tau hyperphosphorylation ; affecting beta-amyloid (Aβ), β-secretase, reactive oxygen species , tumor necrosis factor-α, cyclooxygenase-2, and interleukin-1β production; and promoting Aβ 25-35 disaggregation. The effective permeability of compound 14a across the blood-brain barrier was 26.13 × 10 −6  cm/s, indicating that it can provide adequate exposure in the central nervous system. Further, compound 14a improved learning, memory, and novel object recognition in mice, and in vivo toxicity experiments confirmed a good therapeutic safety range. Thus, compound 14a is a promising multifunctional lead for treating Alzheimer's disease and offers new avenues for natural product-derived anti-Alzheimer's disease drugs.

CAS / MDL: 112-40-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY · 2022 ·Vol. 70 ·期 2 ·697-706 · IF 2.724

Semi-rational protein engineering of a novel ene-reductase from Galdieria sulphuraria for asymmetric reduction of (R)-carvone and ketoisophorone

Shijin Wu,Bijiao Wang,Hongde Yan

Asymmetric reduction of ( R )-carvone and ketoisophorone by an engineered ene-reductase from Galdieria sulphuraria (GsOYE) combined with glucose dehydrogenase for NADPH regeneration were studied. A semi-rational protein engineering was used to enhance the activity and selectivity of GsOYE. Upon the sequence alignment and molecular docking results, two amino acid residues at positions 66 and 270 were selected as saturation mutation sites. Finally, a single substitution variant of GsOYE-N270A with complete conversion (100%) and diastereoselectivity (de p >99%) for reduction of ( R )-carvone and a double substitution variant GsOYE-Y66P/N270H with improved stereoselectivity for reduction of ketoisophorone were obtained.

CAS / MDL: 6485-40-1 1125-21-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Asian Journal of Pharmaceutical Sciences · 2022 · IF 9.273

Design and fabrication of r-hirudin loaded dissolving microneedle patch for minimally invasive and long-term treatment of thromboembolic disease

Mengfang Wu,Tian Xia,Yaran Li,Tianfa Wang,Shijia Yang,Jinchao Yu,Qiaoyan Liang,Teng Shen,Min Yu,Bing Zhao

Cardiovascular disease is the leading cause of global mortality, with anticoagulant therapy being the main prevention and treatment strategy. Recombinant hirudin (r-hirudin) is a direct thrombin inhibitor that can potentially prevent thrombosis via subcutaneous (SC) and intravenous (IV) administration, but there is a risk of haemorrhage via SC and IV. Thus, microneedle (MN) provides painless and sanitary alternatives to syringes and oral administration. However, the current technological process for the micro mould is complicated and expensive. The micro mould obtained via three-dimensional (3D) printing is expected to save time and cost, as well as provide a diverse range of MNs. Therefore, we explored a method for MNs array model production based on 3D printing and translate it to micro mould that can be used for fabrication of dissolving MNs patch. The results show that r-hirudin-loaded and hyaluronic acid (HA)-based MNs can achieve transdermal drug delivery and exhibit significant potential in the prevention of thromboembolic disease without bleeding in animal models. These results indicate that based on 3D printing technology, MNs combined with r-hirudin are expected to achieve diverse customizable MNs and thus realize personalized transdermal anticoagulant delivery for minimally invasive and long-term treatment of thrombotic disease.

CAS / MDL: 989-38-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Arabian Journal of Chemistry · 2023 · IF 6

Danshen ligustrazine injection ameliorates MCAO/R rats through the AhR-SOCS2 axis in association with gut microbiota-derived tryptophan metabolism

Peipei Zhou,Ying Kuang,Lihua Zuo,Shuhong Liang,Zhuolun Li,Lei Chen,Jingxue Li,Jun Zhang,Chenhan He,Xiaobao Wang,Yaojuan Chu,Jianying Pei,Zhi Sun,Shuzhang Du

Background Danshen Ligustrazine Injection (DSLI), composed of the extract of Salvia miltiorrhiza Bunge and Conioselinum anthriscoides 'Chuanxiong', is commonly used in the clinical treatment of ischemic stroke, which is the most common type of cerebrovascular disease, affected by multiple factors. The brain-gut axis is a new type of influencing factor for ischemic stroke, however, there is a lack of systematic research on the relationship between microbiota and host metabolic phenotype. This study aimed to investigate the host metabolic phenotype-microbiome interface in ischemic stroke and the immunomodulatory effects of DSLI. Methods In the study, liquid chromatography-mass spectrometry was used to primarily analyze the quality markers (Q-markers) and the polyphenols of DSLI. Based on 16S rRNA gene sequencing and metabolomics, the variations of microbial composition in different groups were characterized. In addition, a network diagram was constructed to reveal the interrelationship between DSLI-regulated gut microbiota changes and DSLI-regulated brain metabolites in MCAO/R rats. The expression of the aryl hydrocarbon receptor (AhR) in the colon and brain by immunofluorescence and suppressors of cytokine signaling 2 (SOCS2) by western blot were further detected. Results Diminished metabolic diversity and alterations in the tryptophan metabolism pathway were a feature of IS in the study. The results revealed that Clostri_UCG-014 was positively correlated with indoleacrylic acid, indole-3-methylacetate, and Ruminococcaceae was strongly related with L-tryptophan, 3-methylindole, and indole. The results of immunofluorescence showed that the expression of AhR in the colon and brain tissues of rats in the model group was greatly reduced compared with that in the sham-operated group, and was heavily activated with the treatment of DSLI. The levels of aryl hydrocarbon nuclear receptor ARNT2 and SOCS2 were down-regulated in the brains of Model rats, whereas increased by DSLI, further confirming that the brain-gut microbiota-Trp metabolism exists in the pathological changes of stroke and the intervention mechanism of DSLI. Conclusions The present study findings suggest Clostri_UCG-014, Ruminococcaceae, and Firmicute_RF39 play an important role in improving the regulation of immune function in stroke through tryptophan metabolites by acting on the AhR-SOCS2 axis.

CAS / MDL: 64-18-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。