SENSORS AND ACTUATORS B-CHEMICAL
·
2023
·
IF 8.4
Liyong Du,Yi Liu,Xiufen You,Heming Sun
Metal oxide-based gas sensors are widely used in the detection of toxic and harmful gases due to their advantages of high precision, convenient use and stable performance, but their application range is limited due to the high working temperature. In this work, MOF-derived flower-like Fe-doped Co 3 O 4 porous hollow structures are obtained using a simple solvothermal method . The obtained samples are characterized in terms of their crystalline structure, morphology, chemical composition , optical properties and specific surface area . This study systematically investigates the sensing performance of pristine and Fe-doped Co 3 O 4 samples. The results show that the 2 at% Fe-Co 3 O 4 sample has the best n-butanol sensing properties. This sample exhibits high response and rapid response/recovery speed at a low working temperature of 110 °C, as well as good repeatability and anti-humidity features. The enhanced sensing properties can be attributed to several factors, including the adjustment of baseline resistance, increase in oxygen vacancies , decrease in bandgap, and the formation of unique hollow and porous structures . Overall, this work provides valuable insights into the potential applications of Fe-doped Co 3 O 4 materials in sensing technologies.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Qianqian Chen,Zhengyan Xue,Fengchun Wei,Qiaohuan Cheng,Renjie Wang,Tianyu Hu,Chunlong Guan,Bo Ouyang,Sankui Xu,Bingbing Fan,Xiaochen Li
Optimizing the composition and structure of metal-organic framework (MOF) materials has been proven effective in enhancing the performance of the oxygen evolution reaction (OER). However, rapid and controllable synthesis of MOF materials still faces challenges. In this work, we employed microwave assistance and surfactant soft templating to achieve rapidly synthesize CoNi-MOF-74 with controllable morphology. By incorporating 4% polyvinyl pyrrolidone (PVP), we successfully synthesized uniform hexagonal PVP4%-CoNi-MOF-74 within a remarkably short time of only 20 min. The PVP4%-CoNi-MOF-74 exhibited a mesoporous structure, displaying an impressive BET surface area of 1321.8 m 2 /g. PVP4%-CoNi-C alloy was obtained through a direct high-temperature treatment of PVP4%-CoNi-MOF-74 in an N 2 environment. The PVP4%-CoNi-C alloy successfully preserved their initial morphology and pore structure , and exhibited excellent OER performance. At a current density of 10 mA/cm 2 in a 1.0 M KOH solution, it demonstrated an overpotential of 310 mV, outperforming the commercial precious metal catalyst RuO 2 (overpotential of 394 mV). Impressively, even after 3000 cycles, the overpotential of PVP4%-CoNi-C alloy only experienced a minimal positive shift of 0.02 V, showcasing its excellent stability. Through a combination of experimental findings and DFT calculations, it is believed that the superior OER performance of the PVP4%-CoNi-C alloy can be attributed to its morphological dependence induced by the hexagonal prism structure, its large specific surface area facilitating more active sites, as well as the enhanced coordination interactions and faster electron transfer capabilities provided by the unique CoNi active site module.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Jingjing Li,Wei Xia,Yanna Guo,Ruijuan Qi,Xingtao Xu,Dong Jiang,Tao Wang,Yoshiyuki Sugahara,Jianping He,Yusuke Yamauchi
Iron-based single-atom catalysts (Fe-SACs) containing Fe–N 4 active sites have shown immense potential in the oxygen reduction reaction (ORR). However, the limited ability to adsorb O 2 and catalyze subsequent O–O bond breaking on Fe–N 4 sites has hindered their full potential, especially in acidic electrolytes. Here, we present an approach by utilizing a tunable curved surface to enhance the activity of Fe–N 4 active sites, with theoretical calculations, demonstrating that Fe–N 4 sites anchored on low–curvature surfaces (lc-Fe-N 4 ) is favirable for ORR. Experimental results show that the catalyst exhibits excellent catalytic activity and stability for ORR in acidic electrolytes, with a half-wave potential of 0.82 V vs. RHE, approaching that of commercial Pt/C. This work develops an approach for promoting the catalytic activity by anchoring atomically dispersed Fe–N 4 sites, unlocking their potential for extended use in electrocatalytic and energy storage applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2023
·
IF 4.9
Shiyong Xu,Mei Li,Yijun Wang,Caiyun Gao,Rongsheng Xu,Zhiliang Jin
A novel composite photocatalyst for photocatalytic decomposition of water for hydrogen evolution was successfully synthesized by in-situ growth of nitrogen and sulfur co-doped coal-based carbon quantum dots (NSCQDs) nanoparticles on the surface of sheet cobalt-based metal-organic framework (Co-MOF) and graphitic carbon nitride (g-C 3 N 4 , CN). The structure and properties of the obtained catalysts were systematically analyzed. NSCQDs effectively broaden the absorption of Co-MOF and CN in the visible region. The new composite photocatalyst has high hydrogen production activity and the hydrogen production rate reaches 6254 μmol/(g·h) at pH = 9. At the same time, NSCQDs synergy Co-MOF/CN composites have good stability. After four cycles of hydrogen production, the performance remains relatively stable. The transient photocurrent response and Nyquist plot experimental results further demonstrate the improvement of carrier separation efficiency in composite catalysts. The semiconductor type (n-type semiconductor) of the single-phase catalyst was determined by the Mott-Schottky test, and the band structure was analyzed. The conductive and valence bands of CN are −0.99 and 1.72 eV, respectively, and the conduction and valence bands of Co-MOF are −1.85 and 1.33 eV, respectively. The mechanism of the photocatalytic reaction can be inferred, that is, Z-type heterojunction is formed between CN and Co-MOF, and NSCQDs was used as cocatalyst.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2023
·
IF 9.5
Ke Chen,Linhan Ni,Xin Guo,Chengming Xiao,Yue Yang,Yujun Zhou,Zhigao Zhu,Junwen Qi,Jiansheng Li
The performance of mixed matrix membranes (MMMs) substantively depends on the intrinsic structure and composition of the introduced nanofillers. In this work, pyrazole-based metal-organic frameworks (termed as MOF-303) were introduced into polymer of intrinsic microporosity (PIM-1) through a physical blending approach. Thanks to the well CO 2 -philic capability, high porosity, and appropriate pore structure of the incorporated MOF-303, the obtained MMMs exhibited remarkable separation performance. The improved CO 2 permeability and well-maintained CO 2 /CH 4 selectivity were achieved. Specifically, MMMs introducing 30 wt% MOF-303 loading exhibited a CO 2 /CH 4 selectivity of 27.6 and a high-CO 2 permeability of 7528.2 Barrer, which were 2.2 and 1.9 times greater than those of the unfilled PIM-1 membranes, respectively. Furthermore, a 33-h continuous separation test verified the excellent stability of the manufactured MMMs. More importantly, the MMMs showed significant resistance against physical aging, retaining up to 92.8% of their original CO 2 permeability after 150 days, compared to just 33.0% for control PIM-1 over the same period. Meanwhile, the plasticization resistance of the MMMs was reinforced compared to the unfilled PIM-1 membrane. This study potentially provides a novel approach for the rational design of MMMs in CO 2 separation applications.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2023
·Vol. 29
·期 12
·5491-5503
·
IF 2.8
Ren Shufang,Cao Li,Liu Xiaohang,Cui Wangyong,Lv Rui,Guo Tong,Wang Qingtao,Zheng Zhixiang
The detection of norfloxacin (NOR) is crucial because the overdoes and accumulation may result in residues in environment in animal-derived foods, which can destroy ecology and cause disease for people. A molecularly imprinted electrochemical sensor based on g-C 3 N 4 /Cu-MOF was constructed for the selective detection of norfloxacin in this paper. The g-C 3 N 4 /Cu-MOF was synthesized by melamine pyrolysis and solvothermal method followed by ultrasonic mixing. After drop casting g-C 3 N 4 /Cu-MOF on glassy carbon electrode, the molecularly imprinted film was synthesized by electropolymerization. The composite was analyzed by powder X-ray diffractometer, field emission scanning and transmission electron microscope, and Fourier transform infrared spectroscopy. The electrochemical properties of the sensor were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and pulse voltammetry. The results show that the composite of g-C 3 N 4 /Cu-MOF efficiently decreased the charge transfer resistance of electrode and improved the electron transfer kinetic between analyte and electrode with the improved current response and increased active area. After optimizing conditions of the ratio of functional monomers to template molecules, the number of polymerization cycles, accumulation time, electrolyte pH, and the sensor exhibits excellent response toward NOR with the linearity range of 0.02–0.1 μmol/L and 1–120 μmol/L and the limit of detection of 6.67 nmol/L. Moreover, it shows good selectivity, anti-interference, and reproducibility properties. In the real sample detection of pharmaceutical formulations, serum and milk, the sensor shows an acceptable recovery rate and standard deviation.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2023
·
IF 16.5
Mingming Song,Xianghai Song,Xin Liu,Weiqiang Zhou,Pengwei Huo
The design of a heterogeneous structure for photocatalysts has attracted significant attention. In this study, a step-scheme (S-scheme) heterojunction was designed using an in-situ synthesis method. The resulting heterojunction comprised 3D microspheres of ZnIn 2 S 4 and octahedral MOF-808 (ZnIn 2 S 4 /MOF-808). During this process, we investigated the impact of the scale of the ZnIn 2 S 4 microspheres on performance by controlling the growth of the ZnIn 2 S 4 microspheres with various scales. The maximum catalytic activity was discovered to be achieved with ZnIn 2 S 4 microspheres of 6 µm when coupled with MOF-808. Compared to pure ZnIn 2 S 4 and MOF-808, the fabricated S-scheme ZnIn 2 S 4 /MOF-808 heterojunction exhibited notably improved photocatalytic CO 2 reduction performance. The performance of the CO yield of the optimized sample could reach 8.21 μmol g −1 h −1 , which was approximately 10 and 8 times higher than those of ZnIn 2 S 4 (0.84 μmol g −1 h −1 ) and MOF-808 (1.03 μmol g −1 h −1 ), respectively. Moreover, ultraviolet photoelectron spectroscopy, ESR, in situ X-ray photoelectron spectroscopy, and density functional theory calculations were used to study the charge transfer mechanism of the S-scheme heterojunction. In-situ FT-IR investigation established the Carbene pathway as the source of CO production (CO 2 → CO 2 * → COOH* → CO* → CO). This study provides an efficient method for designing an S-scheme heterojunction for photocatalytic CO 2 reduction.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Xu Pan,Junhong Wang,Ye Chen,Qing Wen,Cunguo Lin,Haiping Gao,Zhenghui Qiu,Liuqingying Yang
As a green conversion device, the electricity performance of microbial fuel cell (MFC) was mainly affected by the extracellular electron transfer (EET) process of the biofilm. This paper presented the fabrication and characterization of carbonized derivatives composed with alloy nanoparticles (NPs) derived from Zr-based metal organic frameworks, which exhibited biocompatibility and high electrocatalytic activity. As the results of bioanodes, the charge transfer resistance decreased from 5.60 Ω (Zr-C) to 0.61 Ω (Fe/Ni-Zr-C), and the exchange current density increased from 0.56 mA/cm 2 (Zr-C) to 1.40 mA/cm 2 (Fe/Ni-Zr-C). Electrochemical tests and density functional theory (DFT) confirmed that Fe-Ni alloy NPs promoted the rapid transfer of electrons within the electrode and improved the EET efficiency mediated with the flavin compounds. High throughput sequencing and PICRUSt verified the specific screening function of Fe-Ni alloy for electrogenic bacteria (mainly Geoalkalibacter) and the promoting effect on the expression of flavin-related proteins in biofilm. The maximum power density of Fe/Ni-Zr-C MFC (5.09 W/m 2 ) was higher than that of Ni-Zr-C (4.19 W/m 2 ), Fe-Zr-C (3.58 W/m 2 ) and Zr-C (3.09 W/m 2 ) MFCs. Fe/Ni-Zr-C material can act as an economical and high-performance bioelectrocatalyst to improve the power generation capability of MFC by improving EET rate and energy conversion efficiency of biofilm.
✓ 已验证
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2023
·
IF 8.7
Tao Zhang,Wanling Cai,Zuliang Chen
Bio-nanocomposites have attracted increasing research attention because they are able to integrate bio- and nano-related functions, and subsequently demonstrate potentially beneficial environmental applications. Here, a functional bionanomaterial based on Burkholderia cepacian (FZ) immobilized on GO/ZIF-8 was developed and used to remove malachite green (MG), with functions based on both biodegradation and adsorption. XRD and FTIR results showed that in situ production of GO/ZIF-8 by combining Zn 2+ in ZIF-8 with the carboxyl group on the GO surface, led to FZ immobilized in GO/ZIF-8 through covalent bonding. Zeta analysis showed that the surface of FZ and GO/ZIF-8 had different charges under pH = 9.12, suggesting immobilization also occurred via electrostatic action. BET results confirmed that the specific surface area of GO/ZIF-8 was much larger than that of GO and ZIF-8, but the reduced specific surface area of FZ@GO/ZIF-8 could be due to FZ loading on its surface. The efficiency of FZ@GO/ZIF-8 in the removal of MG reached 99% and furthermore retained good stability after five cycles. The efficiency in removing multiple ions in river water reached more than 80%, which is evidence strongly suggesting that FZ@GO/ZIF-8 is an environmental bionanomaterial with effective application potential.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2023
·
IF 6.6
Qingyang Yin,Tong Xu,Fuhuai Cao,Yaya Wang,Chao Yang,Na Liu,Jing Liu,Rongmei Liu
Metal organic framework (MOF) is considered as an excellent electrode material for supercapacitors due to its low cost and homogeneous nanostructure, but the drawbacks of single MOF , such as low specific capacity and stability, limit its development, so the design of bimetallic MOF structural composites is a challenging but favourable strategy for the development of supercapacitors. In this paper, NiFe-MOF/PBAs heterostructure, a bimetallic MOF material with a granular rod-like structure, is successfully prepared by using bimetallic MOF as a precursor and introducing [Co(CN) 6 ] 3− ions to further convert it into PBAs (Prussian blue analogs). Due to the special macroporous structure of PBAs, the composite combines the advantages of the two MOF materials, and the specific capacity is as high as 4270.19 C g −1 at 1 A g −1 . The composite still has excellent electrochemical properties when assembled into devices. The specific capacity is 1996.01 C g −1 at 1 A g −1 , the energy density reached 749.99 W h kg −1 at a power density of 415.85 W kg −1 , and the decay rate is only 1.14 % after 20,000 cycles at 10 A g −1 . These results indicate that the designed dual MOFs composite electrodes have good application prospects in the field of electrochemical energy storage.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2021
·Vol. 188
·期 4
·1-8
·
IF 5.833
Wan Huimin,Wang Yufei,Chen Juan,Meng Hong-Min,Li Zhaohui
A two-dimensional (2D) Co-MOF nanosheet-based nanozyme was developed for colorimetric detection of disease-related biomolecules. The prepared 2D Co-MOFs exhibited ultrahigh peroxidase catalytic activity. 2D Co-MOFs can catalyze the oxidation of colorless 3,3′,5,5′-tetramethylbenzidine (TMB) to the blue product oxTMB, accompanying an obvious change of absorption value at 652 nm. However, alkaline phosphatase can catalyze the hydrolysis of L-ascorbic acid-2-phosphate to produce ascorbic acid which can reduce the oxTMB to TMB, resulting in an obvious color fading. Therefore, by recording the change of absorption value at 652 nm, the 2D Co-MOF nanosheets were used to detect ascorbic acid (AA) and alkaline phosphatase (ALP). The limit of detection for AA and ALP was 0.47 μM and 0.33 U L −1 , respectively. The limit of quantification for AA and ALP was 1.56 μM and 1.1 U L −1 , respectively. The developed nanozyme was successfully used to determine alkaline phosphatase in clinical human serum samples and the results were consistent with those provided by the hospital. Furthermore, by integrating 2D Co-MOF nanosheets with image recognition and data processing function fixed on a smartphone, a portable test of ascorbic acid was reached. Graphical abstract
Schematic presentation of the preparation of two-dimensional Co-MOF nanosheet-based nanozyme and their application in portable detection of biomolecules
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Xinlu Yang,Xinyu Xie,Siqi Li,Wenxuan Zhang,Xiaodan Zhang,Hongxiang Chai,Yuming Huang
Herein, we reported the design and fabrication of polyoxometalates coupling metal-organic framework (POM@MOF) hybrids derived hierarchical hollow Mo/Co bimetal oxides nanocages (Mo/Co HHBONs) for the peroxymonosulfate (PMS) activation to degrade levofloxacin (Lev). The Mo/Co HHBONs are hollow nanocages with high specific-surface areas and hierarchical micropores, mesopores , and macropores . In addition to compositional modulation, polyoxometalate (H 3 PMo 12 O 40 ·nH 2 O) exhibited striking effect on the textural properties of Mo/Co HHBONs. The Mo/Co HHBONs had outstanding catalytic activity with first order-kinetics that were 6 − 10 times higher those previously reported. They exhibited good adaptability over a pH range of 3 − 11, as well as excellent universality and reusability. By altering the surface porosity, electronic structure, and oxygen vacancies of Co 3 O 4 , hetero-metal Mo doping induced Mo/Co HHBONs significantly promote the generation of reactive oxygen species , including • OH, SO 4 •− , O 2 •− , and 1 O 2 . Density functional theory indicated that Mo/Co HHBONs had better adsorption, enhanced electron-transfer abilities, and a longer O-O bond length than did Co 3 O 4 , for improved catalytic reactivity. This research provides a new strategy to design the POM@MOF hybrids derived hierarchical hollow nanocages with highly PMS activating capacity for the removal of antibiotics and other refractory contaminants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子