CARBON
·
2024
·
IF 10.5
Yu Zhang,Jingde Luan,Panpan Li,Longde Jiang,Haibin Yan,Wengang Liu,Zheng Yan
Water-based homogeneous pre-assembly and thermal polycondensation were used to prepare carbon-doped oxygen-bridged layer-twisted graphite carbon nitride (g-C 3 N 4 ) heterojunction for highly efficient photocatalytic hydrogen evolution (PHE). Despite the narrow band gap of around 0.91 eV, g-C 3 N 4 heterojunction exhibited an excellent hydrogen evolution rate (563.87 μmolg −1 h −1 ) in 30 % methanol/water solution without precious metal assisting catalysts, 36.85 times higher than g-C 3 N 4 . C doping in heptazine ring and bridging O caused the adjacent layer of g-C 3 N 4 to twist by 11° in three-dimensional space. Noticeably, carbon doping in triazine ring was favorable to the establishment of build-in electric field between adjacent layers owing to the delocalized large π bonds . Bridging oxygen acted as a conversion switch for electron storage and transport of photogenerated charge from innerlayer (unmodified layer) with high Fermi level to outlayer (modified layer) with low Fermi level. This work provided an insightful guidance to novel layer-twisted g–C 3 N 4 –based photocatalysts for efficient H 2 production.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Kuo Yang,Yun Yang,Yifan Jiang,Bingjie Ye,Luowei Li,Wenju Liu,Tong Yan,Wei Li,Shixi Liu
s In this study, a flower-shaped Bi 2 S 3 /g-C 3 N 4 heterostructure was synthesized via a hydrothermal method and utilized as a visible-light-driven photocatalyst for the removal of hexavalent chromium (Cr 6+ ) and Rhodamine B (RhB). Employing an interface electronic engineering strategy with heterostructure nanosheets, the thickness of the nanosheets was adjusted by varying the molecular weight of the structure guiding agent, polyethylene glycol (Mn = 400, 2000 or 4000). Under visible light irradiation for 18 and 60 minutes, the removal efficiencies of Cr 6+ and RhB reached 95.0 % and 99.9 %, respectively, with corresponding rate constants being 8.64-fold and 9.67-fold higher than pure Bi 2 S 3 . The enhanced photocatalytic efficiency may be attributed to the intermediate adsorption states and increased active sites enhancing light absorption and charge separation. Furthermore, species capture studies revealed that electrons (e - ) and superoxide radicals (·O 2 - ) played crucial roles in the reduction of chromium (VI), while holes (h + ) were the primary active species involved in RhB degradation. Density-functional theory (DFT) calculation demonstrated charge redistribution and electron accumulation can be more obviously observed at Bi 2 S 3 /g-C 3 N 4 than Bi 2 S 3 , which proved that g-C 3 N 4 doping effectively improved the electrons transfer efficiency over the Bi 2 S 3 /g-C 3 N 4 surface, thereby enhancing the photocatalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
STARCH-STARKE
·
2017
·
IF 1.837
Quan Huo,Dong Liu,Jingjing Zhao,Jianshu Li,Rongna Chen,Suyan Liu
A new semi-interpenetrating network superabsorbent resin (semi-IPN SAR), starch-g-poly (sodium acrylate)/PVP, with a three-dimensional (3D) network structure constructed from a starch-g-poly(sodium acrylate) (starch-g-PNaA) network and linear poly(vinylpyrrololidone) (PVP) was synthesized by a free-radical solution polymerization method in the presence of initiator ammonium persulfate (APS) and crosslinker N,N′-methylene-bis-acrylamide (MBA). The synthesis conditions were systematically investigated. The optimum synthesis mass ratio of PVP, starch, APS, and MBA to AA was 20, 30, 1.25, and 0.15%, respectively, the neutralization degree of acrylic acid was 80%, and the reaction temperature was 60°C. Furthermore, the semi-IPN SAR was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and three-dimensional X-ray diffraction microscopy (3D-XRDM). FTIR and TGA results agreed that PNaA had been grafted onto the starch macromolecular chains and the starch-g-PNaA network was penetrated by linear PVP polymers by a hydrogen binding action. Moreover, the surface morphology of the resin exhibited apparent wrinkling due to the introduction of PVP. The 3D-XRDM result further proved that the resin was provided with a three-dimensional network structure. The introduction of PVP and the formation of the semi-IPN structure greatly enhanced the water absorbency of the resin. The water and saline absorbency of the optimized material was improved to 2017.8 g/g distilled water and 89.7 g/g NaCl aqueous solution (0.9 wt%), respectively. Furthermore, kinetic analysis agreed that the pseudo-second-order kinetic model was fitted to describe a whole adsorption process, which indicated the adsorption process was not controlled by diffusion steps.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 134
·期 36
·45281
·
IF 1.86
Yijian Wu,Hui Zhang,Baoqing Shentu,Zhixue Weng
This work aimed at studying the role of poly(phenylene oxide) (PPO) and polystyrene (PS) in toughening polyamide-6 (PA6)/styrene-ethylene-butadiene-styrene block copolymer grafted with maleic anhydride (SEBS- g -MA) blends. The effects of weight ratio and content of PPO/PS on the morphology and mechanical behaviors of PA6/SEBS- g -MA/(PPO/PS) blends were studied by scanning electron microscope and mechanical tests. Driving by the interfacial tension and the spreading coefficient, the “core–shell” particles formed by PPO/PS (core) and SEBS- g -MA (shell) played the key role in toughening the PA6 blends. As PS improved the distribution of the “core–shell” particles due to its low viscosity, and PPO guaranteed the entanglement density of the PPO/PS phase, the 3/1 weight ratio of PPO/PS supplied the blends optimal mechanical properties. Within certain range, the increased content of PPO/PS could supply more efficient toughening particles and bring better mechanical properties. Thus, by adjusting the weight ratio and content of PPO and PS, the PA6/SEBS- g -MA/(PPO/PS) blends with excellent impact strength, high tensile strength, and good heat deflection temperature were obtained. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45281.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2024
·
IF 6.3
Huda D. Abdul kader,Saad H. Ammar,Waqar A. Abdulnabi,Zaid H. Jabbar,Haidar Taofeeq,A. Al-Farraji
The development of new and effective photocatalytic heterojunctions for green environmental remediation under visible-illumination has received great attention in recent years. Herein, we assembled BiVO 4 -decorated S-doped g-C 3 N 4 (BVO/SCN) heterojunctions with different BVO:SCN ratios (5 to 30 wt% BVO) to achieve effective photocatalytic heterojunctions for visible-light-prompted degradation of antibiotic TC in a three-phase split-plate airlift photocatalytic reactor, in which successfully reducing charge recombination rate. Obviously, BVO/SCN endorsed greater photodecomposition performance of TC under visible-light (decompose 95.7 % of TC in 60 min), which compared to SCN was approximately 5-times enhancement. The TC mineralization efficiency of BVO/SCN hybrid (84 % within only 60 min) was higher than that of the individual BVO and SCN. The efficient internal self-mixing generated in the airlift photocatalytic reactor greatly contributed to increasing the TC degradation efficiency by improving the mass transfer and the irradiation process of the mixture, in which the degradation efficiency increased from 88 % without airlift to 95.7 % in airlift reactor. On the other hand, the high degradation efficiency was credited to the extended absorbing of visible-light and great separation of photo-prompted carriers through the formation of Z-type heterojunction between BVO and SCN. As recorded by the trapping investigates, the • O 2 − and • OH radicals act as the main reactive-species in the TC photocatalytic degradation process. Moreover, High durability of the developed BVO/BCN heterojunctions was obtained, in which 89.4 % TC degradation was still recorded after five rounds.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Shuai Ma,Minghao Zhang,Fuxiang Song,Wenhao Yang,Liantao Xin,Caifeng Ding
The electrochemical antifouling sensing interface can effectively resist the adsorption of non-specific biomolecules , which provides a powerful means for the sensitive determination of various biomarkers in complex media. Therefore, the development of simple and efficient antifouling coatings is particularly important. Herein, we utilized tris (2-carboxyethyl) phosphine to rapidly reduce disulfide bonds in bovine serum albumin (BSA) to generate amyloid aggregation (PTB), thus forming a macroscopic two-dimensional film through one-step self-assembly. Compared to other antifouling interfaces, PTB has the advantages of simple preparation means, high stability and reproducibility, as well as good antifouling properties. At the same time, a layer of polyaniline (PANI) was electrodeposited on the modified electrode to improve the electron transmission rate, which improves the detection efficiency of the sensor. Furthermore, g-C 3 N 4 was introduced as an internal standard substance to eliminate instrument errors. According to the ratio of electrochemiluminescence (ECL) signals of [Ru(bpy) 3 ] 2+ and g-C 3 N 4 , a ratiometric sensing strategy was designed to improve detection accuracy and sensitivity. Based on this, the proposed biosensor can achieve sensitive detection of CEA with a detection limit as low as 0.43 fg/mL ( S/N = 3), which has important significance for early clinical diagnosis.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2024
·
IF 5.7
Shuyu Zhu,Shiying Zhou,Liyuan Deng,Tao Gu,Jiawei Li,Jian Chen,Xuemei Wang,Changjun Hou,Danqun Huo
Abnormal alkaline phosphatase (ALP) levels have been linked to breast cancer, prostate cancer, bone damage, gingivitis and abnormal liver function. Monitoring ALP levels is important for better diagnosis and treatment of these diseases. Detection of ALP by colorimetric methods is very portable in terms of signal reading, but still suffers from low sensitivity. SERS can achieve high sensitivity detection, but cannot be separated from large precision instruments. Therefore, researchers have worked to optimize various aspects of the sensor, such as sensitivity, detection time, and operating procedures, to enable portable and rapid ALP detection. Isothermal amplification using simple system components meets the current demand for rapid, portable assays. We have developed a novel one-pot high-efficiency ALP assay strategy called IHP-GT. IHP-GT performs a one-step cascade amplification using only one probe (IGHP) as a template. The phosphorylated primer P binds to IGHP, forming a P/IGHP structure. At this point, the G-quadruplex closes and no signal is generated. In the presence of ALP, primer P is dephosphorylated to remove the restriction and then amplified in a cascade using IGHP as a template to release the full G-quadruplex structure. The single-stranded G-quadruplex will bend to form a secondary structure, facilitating secondary amplification starting with primer AT to produce PrG and P'. The PrG structure will trigger triple amplification, enabling cascade amplification. The G-quadruplex structure produced by cascade amplification has the dual role of promoting amplification of primer AT and binding to ThT to produce a fluorescent signal. The IHP-GT method provides a highly sensitive detection of ALP in less than 90 min and has been successfully used to analyze ALP in human serum samples. In addition, IHP-GT can be used to screen for ALP inhibitors. Importantly, we lyophilized the IHP-GT reaction components into powder form for user-friendly poc testing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Jingqiao Zhu,Hanping Xu,Qiangli Hu,Yujia Yang,Siyang Ni,Feng Peng,Xiaojuan Jin
Stretchable and tough hydrogels have been extensively used in tissue engineering scaffolds and flexible electronics. However, it is still a significant challenge to prepare hydrogels with both tensile strength and toughness by utilizing xylan , which is abundant in nature. Herein, we present a novel hydrogel of carboxymethyl xylan(CMX) graft gelatin (G) and doped with conductive hydroxyl carbon nanotubes (OCNT). CMX and G are combined through amide bonding as well as intermolecular hydrogen bonding to form a semi-interpenetrating hydrogel network. The hydrogel was further subjected to salting-out treatment, which induced the aggregation of the CMX-g-G molecular chain and the formation of chain bundles to toughen the hydrogel, the tensile strain, tensile stress, and toughness of CMX-g-G hydrogels were 1.547 MPa, 324 %, and 2.31 MJ m −3 , respectively. In addition, OCNT was used as a conductive filler to impart electrical conductivity and further improve the mechanical properties of CMX-g-G/OCNT hydrogel, and a tensile strength of 1.62 MPa was obtained. Thus, the synthesized CMX-g-G/OCNT hydrogel can be used as a reliable and sensitive strain sensor for monitoring human activity. This study opens up new horizons for the preparation of xylan-based high-performance hydrogels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yunfei Xu,Ying Li,Yongjian Wei,Haiou Liang,Tong Xu,Yinghui Sun,Jie Bai
Photothermal synergistic catalysis of Suzuki-Miyaura coupling reaction not only utilizes the solar energy efficiently, but also reduces the energy consumption. It is a green organic synthesis method for constructing C–C bonds, which has a wide application. In this work, we constructed a PdO/g-C 3 N 4 /TiO 2 bilayer tubular structure material with a heterojunction structure by a simple and effective method. The catalyst exhibited efficient photothermal synergistic catalytic performance in Suzuki coupling reaction under visible light irradiation. The influence of the catalyst’s structure, morphology, composition, and photothermal response on the Suzuki coupling reaction were discussed based on a series of characterizations and activity test of the catalyst. The results showed that the PdO/g-C 3 N 4 /TiO 2 catalyst contained an effective g-C 3 N 4 /TiO 2 heterojunction structure. Under visible illumination, the differences in interfacial charge concentration and electron affinity between these two different types of semiconductors lead to charge rearrangement and transfer, which greatly improves the carrier separation efficiency. Meanwhile, palladium metal exhibits excellent electron deposition effects, both as an active metal center for SMC reactions and as an electron acceptor for facilitating photoelectron transfer. Electron-rich palladium atoms play an important role in C–C bond formation reactions, improving catalytic efficiency. The PdO/g-C 3 N 4 /TiO 2 catalyst has excellent catalytic activity and can catalyze the SMC reaction under visible light and at 0 ℃, the yield reached 85.6%, which is comparable to the activity of thermal catalysis for 15 minutes. Furthermore, after five cycles, the PdO/g-C 3 N 4 /TiO 2 catalyst still maintained an 83.1% yield, demonstrating excellent cycle stability. This article offers an effective strategy for preparing heterojunction catalyst with visible light response for photothermal reaction and presents the potential of these catalysts as a way to improve the efficiency and sustainability of Suzuki coupling reactions.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Bao-Xu Jiang,Shuang-Bao Li,Ting-Ting Xu,Jian Li,Yu-Teng Zhang
Adsorption membranes have become a hot spot for wastewater treatment in recent years. Due to the lack of active sites in traditional inert materials such as polyvinylidene fluoride (PVDF) membranes, it is difficult to bind pollutants in water with high affinity. Therefore, in this study, ZrT-1-NH 2 /PVDF mixed matrix membranes (MMMs) were prepared by combining an amino-functionalized Zr-based metal–organic cage (ZrT-1-NH 2 ) with a polymer substrate via non-solvent-induced phase separation method for the efficient removal of Orange G (OG) from water. This method has many advantages such as simplicity in operation, high applicability, controllable MOFs loading. The structural characteristics and adsorption properties and of MMMs were also investigated through a series of characterizations and experiments. The result shows that in a 100 mL OG solution with an initial concentration of 50 mg/L and pH=3, M60 exhibited significant adsorption capacity, the removal efficiency reached 97.23 %, with an adsorption capacity of 64.18 mg/g, which is much higher than the pristine PVDF membrane. It is mainly attributed to electrostatic interactions and hydrogen bonding interactions between ZrT-1-NH 2 and OG molecules. This is consistent with the DFT calculations. The introduction of ZrT-1-NH 2 filler improves the performance of PVDF membranes and expands their potential applications.
✓ 已验证
产品关联
DOI
高影响因子
Small Methods
·
2024
·
IF 10.7
Bin He,Wanting Zhao,Wenjin Li,Chunlei Wei,Jian Sun
The improvement of photocatalytic activity of g-C 3 N 4 is expected for its advanced applications but remains a challenge due to the limitations of current strategies, such as single function, inefficiency, and uneconomical. Herein, a modified g-C 3 N 4 with improved interface properties is constructed through the modulation of the ionic microenvironment affected by ionic liquids (ILs) and exhibits a 2.3-fold enhanced photodegradation efficiency and a 3.5-fold enhanced reaction rate relative to pristine g-C 3 N 4 . It has demonstrated excellent performance in photo-therapy bacterial-infected wounds. Theoretical calculation indicated that the precursor can be regulated by designing the specific ILs microenvironment to form “ILs-Mel” clusters due to the diversity of interaction energy and electrostatic potential. The cluster results in uneven stress on the 2D plane, further inducing the reconstruction of the microstructure. The synergistic effect of cations and anions of ILs on regulating the interface properties of g-C 3 N 4 due to the change of skeleton structure during thermolysis of ILs. The microstructure, surface, and optical-electrical properties can be adjusted by selecting different cations of ILs, and the custom-made band structure and wettability can be obtained by selecting different anions. This work provides a facile strategy to modulate the interface properties of g-C 3 N 4 by building specific a microenvironment of precursor.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Huayu Wang,Yanhua Cao,Changsheng Guo,Ming Ge
Heterogeneous catalyst/persulfate advanced oxidation process has been widely used in antibiotic wastewater treatment . As-designed MIL-88A(Fe)/g-C 3 N 4 composite catalyst firstly activated peroxydisulfate (PDS) to degrade tetracycline (TC) in this work. Activating PDS by MIL-88A(Fe)/g-C 3 N 4 has a higher efficiency and rate toward TC degradation compared with MIL-88A(Fe) and g-C 3 N 4 . After 60 min, the optimal MIL-88A(Fe)/g-C 3 N 4 -5 activated PDS to degrade about 80% of TC in water. The existence of g-C 3 N 4 increases the specific surface area and active Fe 2+ content of MIL-88(Fe), promotes PDS adsorption and utilization, thus showing an excellent catalytic performance for PDS activation. MIL-88A(Fe)/g-C 3 N 4 activated PDS oxidation process synergistically removed TC by free radicals (O 2 •− , •OH and SO 4 •− ) with non-free radicals ( 1 O 2 ), and the effect of some important operating factors on TC removal, the TC degradation pathways and toxicity of TC intermediates were analyzed. Moreover, the MIL-88A(Fe)/g-C 3 N 4 -5 powdered catalyst was designed into a catalytic membrane, which could remove 96% of TC in a short time (<10 min). The cycle tests confirm that powdered MIL-88A(Fe)/g-C 3 N 4 composite catalyst and its catalytic membrane have a good recyclability and stability, demonstrating that this catalyst possesses a practical application potential in the treatment of TC polluted wastewater.
✓ 已验证
产品关联
DOI
高影响因子