JOURNAL OF POROUS MATERIALS
·
2021
·Vol. 28
·期 4
·1005-1009
·
IF 2.496
Zhang Jianhui,Chen Jin,Cheng Lei,Wang Yu,Fu Jing
A facile and effective synthetic route has been utilized to synthesize nanoporous carbons (NPCs)/cobalt nanoparticles (CoNPs) composites by direct carbonization of a Co-MOF. The combination of various spectroscopic tools demonstrated that the CoNPs (about 5 nm in diameter) in the resultant composites were evenly installed in the carbon matrix without any aggregations. Furthermore, the size of the CoNPs can be easily controlled by adjusting the temperature of the hydrothermal treatment. Results of UV–Visible spectrophotometer demonstrated the significant effects of the obtained structure on the reduction of the targeted pollutant 4-nitrophenol (4-NP). The high reaction activity catalysed by CoNPs with the presence of sodium borohydride is attributed to nanostructure advantage and the high surface area.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2021
·Vol. 27
·期 8
·3553-3566
·
IF 2.817
Zhang Boyuan,Song Senyang,Li Wenyue,Zheng Lewen,Ma Xiaoyan
Design and construction of multiphase nanostructures of metal organic frameworks (MOF) has recently been considered an effective method for the preparation of synergistic and excellent performance supercapacitor materials. Herein, Ni-Co-Mn-based metal organic frameworks (Ni-Co-Mn MOF) are prepared through an effortless one-step hydrothermal method, in which multiple metal nodes were evenly distributed between MOF nanostructure through ligands and formed a multiphase nanostructure through synergy. The synthesized Ni-Co-Mn 0.25 MOF exhibits a prominent specific capacitance of 1575 F g −1 at 1 A g −1 , remarkable rate capability and cycling stability. Moreover, we constructed an asymmetrical supercapacitor, which performed an excellent energy density of 73.56 Wh kg −1 at a power density of 399 W kg −1 and great cycling stability with 81.64% of original capacitance after 5000 cycles. Ni-Co-Mn MOF is a promising hybrid electrode material for excellent performance supercapacitor as well as it provides a simple and economic way to fabricate supercapacitor composite materials.
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2021
·Vol. 146
·期 19
·5951-5961
·
IF 4.616
Hong Cui,Shuaishuai Cui,Siyuan Zhang,Qiuju Tian,Yunfeng Liu,Ping Zhang,Mingxiu Wang,Jialing Zhang,Xiangjun Li
The stability, repeatability and sensitivity of an electrochemical biosensor material are closely connected with the dispersibility of metal organic frameworks (MOFs) in aqueous media. Herein, a nanocomposite based on Cu–MOF/hemin, which is not only highly water-soluble but also simple and efficient in synthesis, was used for the construction of a non-enzymatic sensor to detect hydrogen peroxide (H2O2). The Cu–MOF/hemin was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS)-mapping, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA), which indicate that hemin and the Cu–MOF were successfully combined. As a H2O2 electrochemical biomimetic enzyme, the Cu–MOF/hemin exhibited excellent electrocatalytic performance, which was confirmed by the electrochemical experiments and chromogenic reactions, and the possible mechanism of the reactions has been deduced. The electrochemical sensor based on the biomimetic enzyme exhibited an extended linear detection range from 0.01–5.0 mM (R = 0.998), low detection limit of 4.14 μM, and high selectivity and stability under the optimized conditions. More importantly, the practical application ability of the sensor was verified by the test of H2O2 in human serum samples and it could be used for the real-time detection of H2O2 released from living cells with satisfactory results. Therefore, this novel nanocomposite has certain potential in preparing electrochemical sensing platforms for nonenzymatic biosensing and provides a new method for clinical diagnosis and real-time monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2021
·
IF 9.594
He Yu,Cong Wang,Fanyi Meng,Jin Xiao,Junge Liang,Hyunseok Kim,Sanghoon Bae,Danqing Zou,Eun-Seong Kim,Nam-Young Kim,Meng Zhao,Baoqiang Li
This research investigates a microwave transduction-based humidity sensor that is a promising candidate for real-time clinical healthcare applications and green miniaturized wearable electronic devices. Optimization of sensing material, sensing platform, and device fabrication techniques produces a carbon dots (CDs)-decorated metal organic framework (MOF)-derived porous Co 3 O 4 (CDs-Co 3 O 4 ) microwave resonator-based sensor with excellent real-time humidity detection. Inspired by the water absorption component polyacrylamide in baby diapers, the acrylamide is adopted to synthesize CDs for microwave humidity sensor. Combining CDs with MOF-derived porous Co 3 O 4 enhances humidity sensitivity under microwave excitation, with a frequency shift of 3.40 MHz/% RH and a loss variation of 0.15 dB/% RH between 5% and 99% RH. These values are 49.7% (for frequency shift) and 20.5% (for return loss) higher than Co 3 O 4 sensor. Moreover, CDs-Co 3 O 4 exhibits high selectivity towards water vapor against other volatile organic compounds, and the response or recovery time are both less than 5 s. Fabricated by an integrated passive device technology, the sensing platform is miniaturized at 0.98 × 0.80 × 0.22 mm 3 with superb device stability and reliability. The CDs-Co 3 O 4 sensor remarkably monitors respiratory patterns of breathing or apnea, as well as subtle changes in the humidity levels of an approaching finger. A charge transfer process and microwave interactions are the mechanisms for improved humidity sensitivity.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2020
·
IF 5.977
Yan Liu,Lianying Zhang,Qinge Li,Han Dai,Ting Xiang,Gangyi Yang,Ling Li
In this work, a colorimetric assay for visfatin detection is described. The mixed valence state Ce-MOF (MVCM) modified by platinum nanoparticles (Pt NPs) is used as a novel catalyst. MVCM exhibits excellent intrinsic peroxidase-like catalytic activity due to the spontaneous recycling of the Ce(III)/Ce(IV) system. Pt NPs serve not only as a carrier of the –NH 2 -modified single strand DNA (S1) but also as a synergistic catalyst of MVCM. The capture probe (S2) attached to the streptavidin-modified magnetic beads (Mag-SA) could combine with the aptamer to form the Mag-SA/S2/aptamer complex. When in the presence of the target visfatin, aptamer specifically combines with the visfatin, which induces the release of Mag-SA/S2 from the Mag-SA/S2/aptamer complex. At this time, the [email protected] /S1 complex connects with the released Mag-SA/S2, which quickly catalyzes the 3,3,3′,3′-tetramethylbenzidine (TMB), leading to a color change. Under optimal conditions, the absorbance increases linearly when the concentration ranges from 1 ng mL −1 to 100 ng mL −1 , and the detection limit is as low as 0.11 ng mL −1 . Furthermore, Mag-SA/S2 can be reused at least five times by using the uracil-DNA glycosylase (UDG) and an external magnetic field. The proposed method shows satisfying reproducibility, stability, specificity, and sensitivity, and it was successfully applied to detect visfatin in spiked human serum samples. Thus, it has great potential for clinical research, detection, and catalytic applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Rui Zhao,Xiaoyuan Shi,Tingting Ma,Huazhen Rong,Ziyang Wang,Fengchao Cui,Guangshan Zhu,Ce Wang
Recently, metal–organic framework (MOF)-based electrospun fibers have attracted considerable attention as adsorbents for organic contaminant removal from water. To prepare these fibers, two common strategies including blending electrospinning and surface coating are employed. However, fibers obtained from the two strategies still have some disadvantages, such as adsorption site blockage and unstable loading. Here, we constructed interconnected mesopores in the electrospun zeolitic imidazolate framework-8 (ZIF-8)/polyacrylonitrile (PAN) fibers with the assistance of poly(vinylpyrrolidone) to expose more adsorption sites of ZIF-8 and make ZIF-8 more stable. Moreover, the mesopores could also enhance the diffusion of contaminant molecules and create MOF–polymer interfaces in the fiber, which improve the adsorption rate and adsorption capacity, respectively. The obtained fibers were used to adsorb antibiotic tetracycline from water. Benefiting from the mesoporous adsorption channels and the MOF–polymer interface, porous ZIF-8/PAN fibers showed faster adsorption kinetics than ZIF-8/PAN blending fibers and larger adsorption capacity than ZIF-8-coated PAN fibers and ZIF-8/PAN blending fibers. The maximum adsorption capacity of porous ZIF-8/PAN fibers was 885.24 mg/g, which is close to that of pure ZIF-8. After 10 adsorption–desorption cycles, the removal efficiency was still above 97%. In addition, porous ZIF-8/PAN fibers could act as the membrane adsorbents to dynamically separate tetracycline with a treated capacity of 9.93 × 103 bed volumes. These results demonstrate that our prepared porous ZIF-8/PAN fibers have great potential in antibiotic drug removal.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2020
·Vol. 10
·期 9
·1701
·
IF 4.324
Ruowen Liang,Zhoujun He,Chen Zhou,Guiyang Yan,Ling Wu
In this work, CdS quantum dots (QDs) were planted on magnetically recyclable porous Fe2O3(denoted as F450) to obtain CdS QDs/porous Fe2O3hybrids (denoted as X–CdS/F450, in which X is the immersion times of CdS QDs). Porous Fe2O3was first obtained by pyrolysis from an iron-containing metal–organic framework by a two-step calcination method. Next, CdS QDs (of average size 3.0 nm) were uniformly and closely attached to the porous F450 via a sequential chemical-bath deposition strategy. As expected, the X–CdS/F450 hybrids serve as high-performance photocatalysts for the degradation of bisphenol A, a typical endocrine-disrupting chemical. Almost ∼100% of the bisphenol A was degraded over 5-CdS/F450 after visible light irradiation for 30 min (λ ≥ 420 nm). In comparison, the degradation efficiency of pure F450 powder is 59.2%. The high performance of 5-CdS/F450 may be ascribable to the fast electron transport of porous F450, the intense visible-light absorption of the CdS QDs and the matched energy levels between CdS and F450. More significantly, through the photocatalytic degradation reaction, the X–CdS/F450 hybrids can easily be recovered magnetically and reused in subsequent cycles, indicating their stability and recyclability.Keywords:MIL-100(Fe);self-sacrificed template;bisphenol A;photocatalyst;mechanism
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2020
·
IF 3.004
Miaomiao Zhang,Haiyan Liu,Yamei Han,Ligai Bai,Hongyuan Yan
In this study, modified UiO-66-NH 2 and N -methylolacrylamide (NMA) were used as common monomers to prepare a metal organic framework (MOF)-based composite monolith through in-situ polymerization, which was used as a new adsorbent to purify and enrich aristolochic acid-I (AA-I) in medicinal plants. The MOF-based composite monolithic column was characterized by nitrogen adsorption–desorption isotherm, mercury intrusion porosimetry and scanning electron microscopy (SEM). The adsorption ability of MOF-based composite monolith for AA-I was compared with that of the polymer monolith without MOF added. The results proved that the addition of UiO-66-NH 2 can increase both the specific surface area and the permeability of the monolith. Moreover, the adsorption amount of AA-I on the monolith improved. This proposed on-line solid phase extraction (SPE) method showed good linear relationship in the range 0.044 ~ 400 μg/mL with r = 0.9994; the limit of detection (LOD) was 13.08 ng/mL and the limit of quantification (LOQ) was 44.00 ng/mL; the intra-day and inter-day accuracies were less than 0.97%; the inter-column accuracies was less than 6.11%; the recovery was in the range of 91.11%~106.48%. The method was found to be easy, accurate and convenient for on-line enrichment and purification of AA-I in medicinal plants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2020
·
IF 3.99
Ning Wu,Hao Guo,Xiaoqiong Wang,Lei Sun,Tingting Zhang,Liping Peng,Wu Yang
This paper studies the application of lanthanide metal-organic frameworks (Ln-MOFs) in fluorescence detection . The europium-based metal-organic frameworks (Eu-MOFs) are synthesized by a facile solvothermal method , and then the as-prepared MOF were further characterized by PXRD , FT-IR, TG, EDS, SEM, UV–vis spectra and fluorescence spectroscopy. The results demonstrate that Eu-MOF exhibits an intense red fluorescence, which can be readily observed by naked eye in solid state, good structural stability and fluorescence stability in aqueous solution or other organic solvents , especially high selectivity and sensitivity to Fe 3+ and benzaldehyde and the visible color change by the naked eye under UV-light. This luminescent MOF can be used to detect Fe 3+ and benzaldehyde in an aqueous environment with low detection limits of 0.027 μM for Fe 3+ and 0.011 μM for benzaldehyde.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2020
·
IF 4.019
Peiheng Sun,Jing Zhang,Jiajie Huang,Liang Wang,Peijia Wang,Chen Cai,Mixue Lu,Zhujun Yao,Yefeng Yang
As an important class of battery-type materials, transition metal selenides are widely investigated for application in hybrid supercapacitors. Herein, we report the two-step synthesis of bimetallic copper cobalt selenide nanoparticles embedded in N-doped carbon layers ((CuCo)Se/NC) by using metal-organic framework (MOF) as the functional templates. Benefitting from the Cu incorporation in CoSe matrix and integration of MOF-derived carbon layers, the optimized (CuCo)Se/NC electrode delivers a reasonably high specific capacity of 121.4 C/g at 1 A/g with outstanding rate capability and cycling stability. The full hybrid supercapacitor device based on the (CuCo)Se/NC electrode shows a maximum energy density of 16.3 Wh/kg at a power density of 155.3 W/kg with excellent long-term cycling stability over 5000 cycles.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2020
·
IF 6.785
Wei Zhang,Xiaolei Liu,Ping Li,Wen Zhang,Hui Wang,Bo Tang
Elucidating the relationship between glycosylation and phosphorylation of protein post-translational modifications is of great significance for understanding most diseases. Mass spectrometry has been widely used in research of protein phosphorylation and glycosylation. However, to realize in situ and dynamic analysis of the levels of phosphorylation and glycosylation in cells and in vivo, mass spectrometry still has certain difficulties. Herein, a nano-MOF-based fluorescent probe with Zr(IV) and boric acid as the active center was designed and prepared. Fluorescence detection and imaging of phosphate is achieved through the specific interaction of Zr(IV) and phosphate. With aim to achieve specific recognition of glycosylation sites, the boronic acid group was modified in the MOF structure, and the fluorescence of the MOFs was regulated by the alizarin red. Thus, the glycosylation sites were recognized by the competition between alizarin red and glycosyl. Finally, the nanoprobe was successfully applied for in situ fluorescence imaging of the levels of glycosylation and phosphorylation in depressed mice.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Ying Li,Bo Jiang,Yudong Huang
Metal-organic frameworks (MOFs) are promising candidates for improving the interfaces of composite materials. In this work, we build MOF on a carbon fiber (CF) surface by using a layer-by-layer approach in situ. The results reveal that the MOF are constructed on the surface uniformly with a nanosheet-like structure. MOF make a significant contribution to the interfacial shear strength (IFSS) and surface energy, which were increased by 70.30% and 69.75%, respectively. The tensile strength of functionalized CF do not show an obvious decrease. After loading epoxy as guest molecular into the MOF, the functionalized CF present the ability for healing the interface and the first healing efficiency is 97.01%. In the future, the functionalized CF have the potential to apply in composites with remote-control self-healing.
✓ 已验证
产品关联
DOI
高影响因子