ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Junyu Dong,Shuqi Feng,Jie Shao,Lixuan Huang,Lin Xiang,Xuemei Zhou
Bacterial biofilm-induced inflammation can corrode implant surfaces and is the main reason for implantation failures. Considering that conventional mechanical treatments show limited efficacy, prolonged antibiotic therapy carries certain risks as well. Here, we developed NIR-active antibacterial Ti implant surfaces. LiYbF4-based core–shell upconversion nanoparticles (UCNPs) were synthesized with controlled core size (∼10 nm) and shell thickness (∼2 nm). These UCNPs were homogeneously coated onto sandblasted and acid-etched titanium (SLA Ti) implants by ultrasonic spraying following the prior deposition of a conformal polydopamine (PDA) coating. Upon NIR excitation (λ = 980 nm), the UCNPs generate upconverted ultraviolet (UV) light, which can be absorbed by PDA and natural TiO2 layers on Ti implants. The PDA layer not only mediates localized energy transfer but also enhances light absorption through the aromatic structures. Both in vitro and in vivo experiments demonstrated excellent biofilm eradication rate (98.9% in vitro and 99.99% in vivo) and potentially high biocompatibility. This approach combines the high efficiency of LiYbF4 core–shell UCNPs with PDA, providing antibacterial functionality based on photoelectron therapy on Ti implants. The deep-tissue penetration of NIR light and the localized UV generation minimize off-target effects, making this system a promising and clinically translatable strategy for infection-resistant implants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Hongquan Fu,Chuan Zhang,Yujing Zhang,Zhiyan He
Tetracycline antibiotics are widely used, hard to degrade, and pose significant threats to ecosystems. While biochar adsorption presents both efficiency and cost benefits for tetracycline removal, the specific adsorption sites and underlying mechanism remain inadequately understood. This study investigates the synthesis of nitrogen/oxygen co-doped porous biochar (NSEC) by employing fifth-instar silkworm excrement (fed with formulated feed), melamine, and sodium bicarbonate as activator, through a high-temperature carbonization process. The experimental results revealed that NSEC exhibited a significantly increased specific surface area, higher nitrogen doping levels, and more surface defects, thereby boosting its tetracycline adsorption capacity. Notably, The NSEC900 sample managed to eliminate 87.6% of tetracycline from a 30 mg·L⁻¹ solution in just 2 min and retained about 98.5% after undergoing five adsorption/desorption cycles, showing outstanding stability. The thermodynamic analysis of adsorption aligns with the Freundlich model with multimolecular layer adsorption, the kinetics analysis conforms to the second-order model with an exothermic process. Pyridine nitrogen, pyrrole nitrogen, C O, and O C-OH groups as the primary adsorption sites are from the biochar surface. Furthermore, the adsorption mechanism is characterized by multimolecular layer chemisorption, mainly maintained by van der Waals interactions, hydrogen bonding, and pore filling, which collectively contribute to its high adsorption performance in actual aqueous environments. This study provides novel insights into the development of high-efficiency adsorbent materials and holds significant implications for the control of tetracycline pollution.
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Runyu He,Fang Chen,Chunxuan Gao,Meng Li,Kaibin Gu,Zhiqun Zou,Jiahao Wu,Chunyi Luo,Xingbo Shi
To address the accelerated spoilage of food caused by temperature fluctuations during cold chain transportation, an intelligent preservation sachet (MCs-Sachet) with temperature-responsive activation was developed. The MCs-Sachet incorporates a polyethylene glycol–citric acid (PEG-CA) matrix and sodium chlorite (NaClO 2 ) microcapsules. Upon exposure to elevated temperature, the composite undergoes a phase transition, releasing acid that triggers the controlled generation of chlorine dioxide (ClO 2 ). The MCs-sachet exhibited broad-spectrum antimicrobial activity, achieving complete inactivation of Escherichia coli , Staphylococcus aureus , and Botrytis cinerea to below the detection limit at a microcapsule loading of 0.75 g. Additionally, it suppressed respiration and reduced ethylene accumulation in blueberries by 88.13%, thereby extending shelf life by approximately 2-fold at 25 °C. In shrimp stored at 4 °C, freshness was prolonged by 48 h. These multifunctional effects demonstrate that the MCs-Sachet servers as an adaptive platform for enhancing food preservation within dynamic cold chains environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2026
·Vol. 33
·期 3
·103
·
IF 3.5
Wang Yanshu,Yu Chao,Liu Xiuming,Jin Zhilan,Li Jingwen,Zhao Shicheng
The nucleating agent 1,3:2,4-Bis(3,4-dimethylbenzylidene) sorbitol (DMDBS) improves the transparency of polypropylene (PP) but often induces yellowing. In this study, a complementary color strategy was employed by incorporating trace amounts of commercial blue dyes, including Acid Blue 74, Pigment Blue 15, and Pigment Blue 29, into DMDBS-nucleated isotactic polypropylene (iPP). Their effects on optical properties, mechanical properties and crystallization behavior were investigated. In terms of optical properties, all dyes effectively reduced the yellowness index (YI). Pigment Blue 15 exhibited the strongest effect by fully counteracting yellowing induced by DMDBS at only 5 × 10 − 5 wt%. Meanwhile, the dyes acted synergistically with DMDBS to reduce haze. Pigment Blue 15 and Pigment Blue 29 decreased haze from 32.3% to 21.3%. Regarding mechanical properties, Pigment Blue 29 showed the most pronounced synergistic effect with DMDBS, increasing the flexural modulus by 8.6%. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) results indicated that all blue dyes promoted the crystallization of DMDBS-nucleated iPP. Pigment Blue 15 exhibited the best performance, increasing the crystallization temperature by approximately 4 °C, and accelerating crystallization rates. Finally, analysis of the Avrami exponents (n) of iPP and nucleated iPP showed that the addition of dyes did not change the crystallization growth patterns of the nucleated iPP. This study provides a simple and efficient strategy to counteract the yellowing induced by DMDBS and enhance the transparency of the iPP, which shows great potential for industrial production.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 8.4
Jiahe Liu,Huan Zhang,Jiahao Fan,Shuqi Ren,Ruili Liang,Li Song,Yachao Jin,Mingdao Zhang
Graphite, as a non-renewable key anode material in lithium-ion batteries, requires efficient and green regeneration to ensure the sustainable development of the battery industry. Conventional recycling methods are hindered by the reliance on highly corrosive reagents or ultra-high temperatures, leading to significant environmental impacts. This study proposes a low-temperature graphitization repair strategy based on ferrocene catalysis. Through iron-based catalyst-promoted carbon layer ordering under mild conditions at 700 °C, the graphitization degree and interlayer structural integrity of the material are significantly enhanced. The regenerated graphite (R-Gra) exhibits excellent electrochemical performance, delivering an initial charge capacity of 359.8 mAh g −1 at 0.05C, comparable to commercial materials, and retaining 222.7 mAh g −1 at a high rate of 3C, with improved cycling stability. Systematic structural characterization and kinetic analysis reveal the intrinsic relationship between the catalytic graphitization process and the restoration of electrochemical properties. Furthermore, tracking the migration behavior of Fe species during long-term cycling confirms that Fe/Fe 3 C nanoparticles remain stably encapsulated within the graphite interlayers, without significant dissolution or migration, effectively avoiding side reactions and electrode interface contamination. This work provides an effective low-temperature and green regeneration route for spent graphite anodes, demonstrating both environmental and practical feasibility.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2026
·
IF 8.2
Chengwan Wang,Junchen He,Aoyu Shen,Tong Xie,Ruo Huang,Xian Wu,Yue Yuan,Sheng-Tao Yang
Nitrate (NO 3 - ), a prevalent pollutant in aquatic ecosystems, poses significant ecological and human health risks due to its excessive accumulation, which accelerates eutrophication. In this study, a novel bimetallic material (B-Fe/Cu) was synthesized via high-energy ball milling using micron-sized zero-valent iron (ZVI) and copper salts. When integrated with ultraviolet (UV) light, the UV/B-Fe/Cu system achieved complete conversion (100%) of 10 ppm NO 3 - -N within 120 minutes. Intriguingly, abundant Cu species were found to mediate the efficient redox cycling between Fe 3+ and Fe 2+ , and superoxide radicals (O 2 ·- ) facilitated the redox cycling between Fe 3+ /Fe 2+ and Cu 2+ /Cu + , while the localized micro-acidic microenvironment of B-Fe/Cu enabled the dynamic pH regulation during nitrate reduction. These triple functionalities ensured the full nitrate conversion in UV/B-Fe/Cu system without toxic NO 2 - byproduct formation across a wide pH range of 3.0-11.0. Furthermore, the UV/B-Fe/Cu system demonstrated exceptional operational stability and environmental robustness, retaining >90% reduction efficiency after four consecutive reuse cycles. These insights advance the rational design of iron-based materials for scalable and sustainable water purification technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Science Advances
·
2026
·Vol. 12
·期 9
·
IF 13.9
Jiaxin Guo,Kan Li,Jianxing Liang,Diwen Ying,Xiaoqian Song,Yi He,Jinping Jia
At present, the traditional anthraquinone method is the main method for producing high-quality and high-concentration H 2 O 2 , but it involves the use of H 2 , resulting in high carbon emissions and certain risks. The double-electron oxygen reduction reaction has become a more environmentally friendly alternative method for producing H 2 O 2 . However, at high overpotentials, the production and conversion rates of H 2 O 2 are still limited. Here, we report an electrochemical method that can convert H 2 O and formaldehyde into high-concentration H 2 O 2 and high-value formate salts with high product purity under environmental conditions. At a current density of 30 milliamperes per square centimeter, continuous operation for 5 hours can produce 6.522% (m/v) H 2 O 2 , and the product does not contain acid, alkali, or excessive impurities. Faraday efficiency reaches 83%. The chronopotentiometry method shows stable current performance of the electrode after 360 hours of operation. This low-carbon, safe, and sustainable approach provides a promising alternative to traditional H 2 O 2 production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Photonics
·
2026
·
IF 6
Qingshui Zheng,Zeyuan Zhao,Zhihang Jin,Yu Zou,Anling Tong,Pengxu Chen,Ruowei He,Yang Wang,Weihai Sun,Chaoping Fu,Jihuai Wu,Sheng Yang
The migration of iodide ions and the inefficient interfacial charge transport continue to pose significant challenges to power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). In this study, we innovatively introduce a multifunctional passivation method that involves doping the P-type material 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) into the fullerene derivative (6,6)-Phenyl C71-butyric acid methyl ester (PC71BM). The introduction of F4TCNQ not only enhances the ability of PC71BM to passivate uncoordinated Pb2+ ions but also promotes a uniform distribution of the passivation layer. Results indicate that this passivation layer effectively immobilizes iodide ions, preventing their random movement within the PVK films and reducing iodine-related defects. Additionally, by raising the Fermi level and enhancing the P-type characteristics, it improves hole extraction and transport, thereby reducing nonradiative recombination in the target device. Consequently, the n-i-p PSCs with the mixed passivation layer achieved a champion PCE of 25.87%, with a higher open-circuit voltage (1.182 V) and a remarkable fill factor (84.64%). Notably, in large-scale manufacturing, n-i-p mini-modules reached a commendable PCE of 22.34%. Furthermore, these devices demonstrated superior stability, maintaining over 95% of their initial efficiency after 900 h of maximum power point (MPP) tracking under ISOS-L-1 standards.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2026
·
IF 6.7
Ken Lu,Jiahui Zhang,Rui Ma,Min Li,Jiangfei Chai,Imre Blank,Yan Ping Chen,Yuan Liu
Aroma is a key attribute influencing the quality of fermented dairy products. Volatile and odor-active compounds of kefir (SN) and three yogurt samples (S1, S2, and S3) were analyzed using the Sensomics approach. Sensory results showed that kefir scored lower than yogurt in sweet, milky, and fermented odor attributes. Gas chromatography-time-of-flight mass spectrometry (GC-ToF/MS) detected 61 volatiles, and gas chromatography-olfactometry (GC-O) further identified 16 odor-active compounds, including three unknown compounds with notable sensory relevance. Based on odor activity value (OAV) calculations, aroma recombination, and omission tests, 2,3-butanedione, hexanal, acetoin, and butanoic acid were identified as key aroma compounds in the kefir sample (SN), contributing to buttery, grassy, creamy, and cheesy aromas. In the yogurt sample (S1), the key contributors were 2,3-butanedione, acetoin, and butanoic acid, imparting buttery, creamy, and cheesy attributes. These findings enhance the understanding of aroma profiles in fermented milks and support future product optimization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Qingquan He,Xinquan Wang,Gang Xu,Tao Zhang,Ruoyu Li,Zehang Liu,Yu Bao,Yaxuan Yang,Jijin Qiao,Jing Li,Jun Pan
Wide-bandgap (WBG) perovskite solar cells (PSCs) based on self-assembled monolayers (SAMs) have demonstrated impressive efficiencies, though their performance and longevity remain substantially compromised by poor wettability during film formation, defects, and energy-level misalignment at the interfaces. Herein, we develop an interface regulation strategy employing a tris(4-carboxyphenyl)phosphine oxide (TC) modified [4-(7H-benzimidazol-7-yl)butyl]phosphonic acid (4PADCB) to construct a multifunctional composite SAM (Co-SAM). The incorporation of TC molecules significantly enhances the interfacial wetting characteristics and crystallization quality of WBG perovskites, effectively passivating defects, optimizing energy-level alignment, and facilitating selective charge transport. This Co-SAM strategy yields impressive device performance: 1.68 eV WBG PSCs achieve a champion power conversion efficiency (PCE) of 22.40% while maintaining >90% of initial efficiency after 1440 h of ambient storage. Furthermore, perovskite/silicon tandem solar cells fabricated using this approach reach a PCE of 30.74%. Our work establishes a new paradigm in interfacial molecular engineering for highly efficient and operationally stable tandem photovoltaics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Ziteng Guo,Bo Zhao,Ziyi Wang,Kang Xie,Weicheng Zhang,Zhihua Li
Developing high-temperature polyimide (PI) adhesives requires the simultaneous enhancement of bulk cohesive strength and interfacial adhesion. In this work, a 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA)/4,4′-oxidianiline (ODA)-based phenylethynyl-terminated PI system was modified via a 30k/8k molecular weight blend strategy to prepare processable, self-supporting adhesive films. To enhance performance, three distinct polar diamines (sulfone, amide, cyano) were introduced to replace a portion of the ODA. This strategy aimed to strengthen substrate wetting for improved interfacial adhesion and to reinforce bulk cohesion through hydrogen bonding. It is confirmed that the amide-containing sample (PI-A50) was the most effective, showing the highest polarity with a dielectric constant of 3.9 and the highest total surface energy of 51.87 mJ/m2. It has also maintained excellent thermal stability, with a glass transition temperature (Tg) of 317 °C and a temperature at 5% weight loss (Td5%) of 537 °C. Molecular dynamics (MD) simulations revealed the unique synergistic mechanism for its superior performance. The –CONH– group not only showed a stronger interfacial binding energy with the Al (111) substrate, calculated at −19048.7 kcal/mol, but also formed the densest interchain hydrogen bond network, which explains why it achieved the highest cohesive energy density of 200.42 J/cm3 and the lowest fractional free volume of 44.28%. This simultaneous strengthening of both bulk cohesion and interfacial adhesion is the key to its enhanced performance.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Energy
·
2026
·
IF 8.1
Yipeng Nie,Longquan Deng,Zipei Cui,Zhao Jiang,Wenchao Sheng
Coupling hydrogen evolution reaction (HER) with glycerol oxidation reaction (GOR) in a hybrid electrolyzer represents a highly promising approach for green hydrogen production and glycerol upgrading. However, the limited activity and stability of existing GOR catalysts restrict the energy efficiency of the coupled system. In this study, Pd/C and Pd 4 Ag x /C catalysts were synthesized to investigate the impact of Ag on the activity and stability of Pd-based catalysts for GOR. The optimized Pd 4 Ag 8 /C demonstrated a specific activity of 17.4 ± 0.1 mA cm −2 Pd and a mass activity of 13.2 ± 0.3 A mg −1 Pd , both being more than 10 times higher than those of Pd/C. Combined results of ultra-performance liquid chromatography and density functional theory calculations revealed that the introduction of Ag promotes C−C cleavage in glyceric acid on Pd sites, facilitating electron transfer in GOR and thereby enhancing the GOR activity. The GOR coupled HER hybrid electrolyzer using Pd 4 Ag 8 /C as the GOR catalyst achieved a significant reduction of ∼1.07 V in cell voltage compared to conventional water electrolysis system at a current density of 10 mA cm −2 with a favorable operational stability, and realized the production of high-value-added chemicals, demonstrating the promising potential in both hydrogen production and upgrade of glycerol.
✓ 已验证
产品关联
DOI
高影响因子