Food Analytical Methods
·
2026
·Vol. 19
·期 10
·302
·
IF 3
Yu Haichao,Huang Jiayue,Zhao Jinfeng,Luo Wang,Li Jianjun,Liu Xiaojun
With the large-scale development of the food industry, hydrogen peroxide (H₂O₂), a potent oxidizing agent, has been illicitly used by some manufacturers for bleaching, decolorization, and preservation, making it a significant potential risk in the field of food safety. Therefore, elucidating the hazardous mechanisms of H₂O₂ residues in food is of paramount importance for strengthening food safety monitoring systems and safeguarding public health. In this study, a label-free and highly sensitive sensing platform based on 4-cyano-4'-pentylbiphenyl (5CB) liquid crystal (LC) microdroplets was developed for the detection of H₂O₂ and catalase (CAT). The sensor enables the detection of H₂O₂ and CAT by monitoring the distinct optical pattern transitions of dodecanal-doped 5CB liquid crystal microdroplets under various conditions using polarized optical microscopy (POM). The results demonstrate that under pH 11 conditions, the limit of detection (LOD) for H₂O₂ is 0.01% (w/v), and for CAT is 0.01 ng/mL. Fourier Transform Infrared Spectroscopy (FTIR) was employed to characterize the post-reaction system, verifying the chemical transformations. Furthermore, simulated testing on food samples was successfully conducted, suggesting that this sensor holds significant potential for applications in food safety, biomedicine, and analytical detection. However, the optical sensing platform is sensitive to changes in ambient humidity and temperature, which may limit its direct application in complex food matrices. Although the system enables intuitive interpretation of POM textures, future work should investigate matrix interference, quantitative image analysis, portable readout integration, and validation using authentic food samples.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Boyang Zhang,Zhiyong Zhang,Yangfan Li,Yangqi Wei,Xingmiao Huang,Chuncheng Chen,Hua Sheng,Jincai Zhao
Post-synthetic strategy modularly integrates CO 2 -to-CO and CO-to-C 2+ sites. • Redox mediator and confinement synergize to regulate cascade reactions. • Confined TEMPOL acts as PCET mediator, lowering CO 2 -to-*COOH barrier. • Inactive MOF is transformed into an efficient CO 2 -to-C 2+ electrocatalyst. Efficient electrochemical conversion of CO 2 to multi-carbon (C 2+ ) products requires the integration of two sequential functionalities: CO 2 activation to *CO and subsequent CO-initiated C-C coupling. Conventional strategies typically rely on the rigid, pre-designed incorporation of these two functional units during catalyst synthesis. In contrast, we propose a post-synthetic modification strategy that introduces a molecular CO 2 activation unit into a pre-formed catalyst scaffold, thereby enabling its spatially proximal coupling with intrinsic CO reduction sites. This concept is demonstrated by encapsulating 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) into the pores of a tetrapyrazolylporphyrin copper-based metal–organic framework (FICN-8). Owing to the well-matched molecular dimensions, the confined TEMPOL and adjacent Cu nodes cooperatively define a cavity that spatially accommodates a CO 2 molecule. Reduced TEMPOL acts as a proton-coupled electron transfer (PCET) mediator, while spatial confinement regulates the local reaction environment, jointly lowering the free energy barrier for *COOH formation. The confined *COOH intermediate is subsequently converted to CO and further undergoes C–C coupling. As a result, FICN-8—originally inactive for CO 2 -to-C 2+ conversion (Faradaic Efficiency, FE< 0.6%)—is transformed into an efficient electrocatalyst, delivering a C 2+ Faradaic efficiency of 42.6% with a two-orders-of-magnitude enhancement in C 2 H 4 formation rate. Download: Download high-res image (123KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124166
·
IF 7.5
Jie Tang,Hangxuan Li,Zhijiang Sun,Li Chen,Ziqing Tang,Fen Ran
Attapulgite is an ideal modifier for thin-film nanocomposite nanofiltration membranes due to its superior dispersibility and surface activity, endowing it with low-cost application potential in water treatment. However, a systematic comparative study on the effect of attapulgite sources on the separation performance of thin-film nanocomposite membranes remains a gap to be filled. This study systematically compared the application performance of attapulgite from three representative origins (Huangnishan, Jiangsu; Linze, Gansu; Mingguang, Anhui, China) in fabricating thin-film nanocomposite nanofiltration membranes via interfacial polymerization. As compared to the pristine PA membrane, the nanofiltration membrane incorporated with 1.0 g/L Mingguang attapulgite achieved the optimal performance, with a 94% water permeance enhancement while retaining 98.0% Congo red rejection and 92.1% Na 2 SO 4 rejection, as well as a flux recovery ratio of over 90%. The multifunctional role of well-dispersed Mingguang attapulgite (enhanced hydrophilicity, electrostatic repulsion, robust hydration layer) was responsible for the balanced permeance, selectivity and anti-fouling performance. In contrast, Linze attapulgite, with lower crystallinity coupled with higher impurity content, resulted in the blockage of membrane channels and a corresponding decrease in permeance. Huangnishan attapulgite had a relatively low absolute zeta potential and poor dispersibility. This work demonstrates that attapulgite origin directly affects nanofiltration membrane performance by regulating material properties, providing a theoretical basis for selecting cost-effective attapulgite sources for high-efficiency nanofiltration membranes fabrication.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Jinhao Gao,Zhuoqing Zhang,Xiaohong Jiang,Wenliang Zhang,Hanbin Liu,Haiwei Wu,Guodong Liu
Lightweight conductive aerogels that combine mechanical robustness, electromagnetic interference (EMI) shielding, and strain sensing are desirable for wearable electronics and intelligent electromagnetic protection. However, conventional conductive polymer aerogels often suffer from fragile porous frameworks and unstable conductive pathways. It remains challenging to simultaneously achieve low density, structural robustness, and functional reliability. Herein, a dual-template engineering strategy integrating bubble templating and ice templating is proposed to construct all-polymer PVA/PAA@PEGDMA/PEDOT:PSS aerogels with hierarchical conductive architectures. In this design, bubble templating generates interconnected macropores that reduce density, provide deformation space, and promote electromagnetic-wave scattering. Directional ice templating forms secondary porous skeletons within the pore walls to reinforce the framework and stabilize conductive pathways. Benefiting from this multiscale structural coupling, the PPPA aerogel series exhibits a low densities ranging from 31.88 to 72.41 mg cm⁻ 3 . The optimized PPPA-2 aerogel shows high electrical conductivities up to 15.51 S m⁻ 1 , compressive strength above 600 kPa, and a modulus approaching 5 MPa. At a thickness of 8 mm, the optimized aerogel achieves an EMI shielding effectiveness of 55.5 dB in the X-band and an SSE/t of 1104 dB cm 2 g⁻ 1 . Moreover, the aerogels show reliable piezoresistive sensing with a gauge factor of 1.35 and fast response/recovery times of 141/147 ms. This work demonstrates a hierarchical pore-network design strategy for stabilizing conductive polymer aerogels and advancing multifunctional lightweight EMI shielding materials. Download: Download high-res image (285KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yuqi Zhou,Qinsheng Lu,Zhenyu Ren,Qianyun Zhang,Haoran Zhang,Yuruo Zhang,Quanjie Lv,Wenjun Shu,Yijun Han,Linxuan Zhang,Yuhao Cai,Congli Yuan,Bin He,Ke Tao
Antibacterial agent combines C14 membrane disruption, SIPA hydrophilicity, charge moderation, and carboxyl grafting. • Initial release-killing combats infection during catheter insertion; robust contact-killing for sustained protection. • Outstanding long-term efficacy: > 85% against E.coli and > 95% against S.aureus after 14 days in PBS. • Charge-moderated antibacterial agent with CS hydration layer resists fouling, thrombosis, and sputum encrustation. The widespread use of implantable medical catheters is frequently associated with infections and biofouling issues, such as thrombus formation or mucus accumulation. Combining high antibacterial efficacy with antibiofouling properties has remained challenging, as the latter are often compromised by cationic or hydrophobic bactericidal agents. To overcome this conflict, we herein develop a charge-moderated antibacterial coating based on an amphiphilic ion-pair nano agent, 1-tetradecyl-3-methylimidazolium 5-sulfoisophthalate ([C14][SIPA]), and co -immobilize it with chondroitin sulfate (CS) through a polydopamine/poly(allylamine) (PDA/PAa)-mediated interfacial anchoring strategy. The resulting coating exhibits superhydrophilicity (water contact angle < 5°), and a negatively charged surface, which together reduce bacteria, proteins, platelets, and other biofouling via electrostatic repulsion and the dense physical hydration layer. Meanwhile, the coated catheter shows exceptional antibacterial activity through a two-stage defense mechanism: early-stage release-mediated killing of surrounding bacteria, followed by long-term surface-associated membrane disruption by retained [C14][SIPA] nanoaggregates. This coating strategy was applicable to representative catheter materials, including silicone rubber, polyurethane, and polyvinyl chloride, suggesting a versatile approach for balancing antibacterial activity, antibiofouling performance, and hemocompatibility on catheter surfaces. We introduce a multifunctional coating for implantable medical catheters to combat infections and biofouling. Utilizing a polydopamine-based layer-by-layer assembly, the coating integrates the amphiphilic ion-pair antibacterial agent 1-tetradecyl-3-methylimidazolium 5-sulfoisophthalate ([C14][SIPA]) with chondroitin sulfate (CS). Their coordinated interfacial organization enables high antibacterial efficacy and superhydrophilicity, providing broad-spectrum antifouling against thrombus and mucus accumulation. Download: Download high-res image (163KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2026
·
IF 6.7
Hang Tian,Lingli Qu,Shihui Chen,Zhuwang Shao,Kerui Li,Qinghong Zhang,Yaogang Li,Hongzhi Wang,Chengyi Hou
Wearable cortisol monitoring offers a noninvasive approach for assessing dynamic physiological stress, but reliable on-body analysis remains challenging owing to limited sweat availability, unstable electrode contact, and use-induced mechanical deformation. Here, we report a compartmentalized multi-lumen, hydrogel-integrated cortisol-sensing fiber (HCSF) for rapid and reliable detection of cortisol in sweat that combines sweat collection, molecular recognition, and wireless readout in a glove-based wearable platform. The interface-engineered interlayer provides topological anchoring for the MIP matrix and promotes efficient charge transfer, while the porous compartmentalized hydrogel sheath functions as an in situ sweat collector, hydrated ion-conducting medium, electrode spacer, and mechanical buffer, collectively stabilizing the fiber–polymer interface under repeated bending. With Prussian blue embedded in the MIP network as an internal redox probe, the sensor enables label-free quantitative cortisol detection through steric-hindrance-mediated signal modulation, achieving a low limit of detection of 0.87 pM and a broad linear range from 1 pM to 10 μM. After integration into a wearable glove with a miniaturized wireless readout module, the platform tracks dynamic cortisol fluctuations during physical exercise and acute cold-pressor tests. This robust and ergonomically integrated platform provides a promising strategy for noninvasive endocrine monitoring and personalized stress assessment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Zheng Deng,Xirui Wu,Tianhao Huang,Huiyuan Chen,Zhuochao Wu,Li Liu,Yuqian Liu,Chunjie Wang,Zijian Xiong,Zhuang Liu,Guangbao Yang
Intracellular polyamine metabolic homeostasis is closely linked to therapeutic outcomes in cancer. However, their intrinsic antitumor mechanisms have not been fully clarified. Herein, we demonstrate that the catabolism of spermine (Spm) and spermidine (Spd) mediated by polyamine oxidase directly generates two potent cytotoxic metabolites, namely acrolein and hydrogen peroxide. These metabolites act synergistically to trigger a marked elevation in intracellular reactive oxygen species (ROS), which in turn activate the caspase-1/GSDMD and caspase-3/GSDME signaling pathways, ultimately driving tumor cells into pyroptosis. Based on these findings, we develop a phenylboronic acid-functionalized sodium alginate-based hydrogel controlled-release system (Alg-PBA/Spd). This platform achieves sustained Spd release through coordination interactions and markedly inhibits tumor growth by inducing pyroptosis. Further studies demonstrate that the Alg-PBA/Spd hydrogel synergizes with radiotherapy (RT) to enhance radiosensitivity in an orthotopic breast cancer model and inhibit pulmonary metastasis. Moreover, this hydrogel enables co-delivery of αPD-L1 with sustained release, which significantly improves the response rate of immune checkpoint blockade therapy by inducing pyroptosis and remodeling the tumor immune microenvironment. Overall, this study not only elucidates a previously unrecognized mechanism underlying polyamine metabolism-driven pyroptosis but also offers a versatile platform to enhance the efficacy of RT and immunotherapy.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Qida Peng,Huihui Su,Jiannan Qin,Hao Cheng,Mingfu Li,Pingjun Zhang,Liqun Jiang
2,5-Furandicarboxylic acid (FDCA) is a promising renewable alternative to petroleum-derived terephthalic acid for the production of bio-based polyesters. However, achieving efficient thermocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to FDCA under mild conditions remains challenging. Herein, we report a lignin-derived nitrogen-doped carbon-supported Co–Mn dual single-atom catalyst (CoMn/LNC) prepared by a chelation-pyrolysis method, which achieves a 99.9% FDCA yield with a productivity of 1542.0 μmol FDCA ·g cat −1 ·h −1 at 65 °C using air as the oxidant. Physicochemical characterizations indicate that an asymmetric CoN 3 –MnN 3 electronic configuration in CoMn/LNC serves as the key catalytic center, which lowers the reaction activation energy and promotes the formation of FDCA under mild condition. Combined density functional theory calculations and in situ DRIFTS reveal that the asymmetric coordination modulates the d-band center, enhances interfacial electron transfer, and promotes HMF adsorption and subsequent oxidation. Furthermore, the asymmetric configuration facilitates oxygen activation and shifts the rate-determining step from the oxidation of HMFCA to FFCA toward FDCA desorption. This work provides a feasible strategy for designing transition metal dual single-atom catalysts for HMF oxidation to FDCA.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Jianying Hao,Xiang Ji,Xiuqiang Li,Qingyu Yu,Kaiyue Yang,Ding Lin,Zihan Chai,Linhua Zhang,Hong Zhang,Fanglian Yao,Dunwan Zhu,Junjie Li
Diabetic wounds, prone to infection and delayed healing, represent a major clinical challenge. Traditional nanosilver-based antibacterial agents remain challenging, including complex preparation, tendency to agglomerate, and poor biocompatibility. Herein, we synthesized lactoferrin-silver oxide nanoparticles (LF-Ag 2 O 2 NPs) via a one-step biomimetic mineralization method using lactoferrin (LF) as a dispersant. This approach significantly improved the dispersibility, stability, and biocompatibility of Ag 2 O 2 NPs while enabling synergistic antibacterial activity. Furthermore, we developed a core–shell microneedle patch (LAg&FGF@CP MN) for programmed drug release to achieve sequential treatment of diabetic wounds. The patch employs a layered loading strategy: the shell layer of the microneedle releases LF-Ag 2 O 2 NPs rapidly in the acidic wound microenvironment, generating reactive oxygen species (ROS) and Ag + that act synergistically with LF to eliminate bacteria efficiently; The inner core layer of the microneedle degrades upon exposure to ROS, slowly releasing fibroblast growth factor (bFGF). This promotes cell proliferation, M2 macrophage polarization, and angiogenesis to facilitate tissue regeneration. This programmed drug delivery system effectively disrupts the “infection-inflammation” vicious cycle and significantly accelerates diabetic wound healing. Collectively, this work offered a novel and efficient strategy for managing refractory diabetic wounds.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TRENDS IN BIOTECHNOLOGY
·
2026
·
IF 16.6
Xiaoya Ren,Xu Cui,Ying Zeng,Yimei Guo,Junhua Chen,Jiafeng Pan
In this research article, an intelligent clustered regularly interspaced short palindromic repeats (CRISPR)/Cas14a-based logic system was developed for microplastic monitoring on the basis of catalytic hairpin assembly (CHA) and DNA walkers on magnetic beads. Polyvinyl chloride (PVC) and polystyrene (PS) can activate the CHA-DNA walker sensing system to generate numerous single-stranded DNA fragments that can be recognized by Cas14a. After the cleavage reaction targeting the fluorophore-quencher reporter, a high Cy5 signal can be observed. The fluorescent biosensor is ultrasensitive, with a limit of detection of 3.4 ng/ml for PVC and 4.1 ng/ml for PS. Using PVC and PS as the two inputs, an OR logic gate was further developed. The input combinations of (10), (01), and (11) can give an output of 1. The sensing system is robust and can work in real water samples with good accuracy. Our proposed biosensor can provide an ultrasensitive and intelligent tool for microplastic monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER
·
2026
·
IF 5.1
Shaoning Lu,Siqi Liang,Guopeng Li,Haihua Zhou,Xulin Huang,Cheng Yi,Jiahua Meng,Chuanguo Ma,Yuqi Liu
Achieving both the processability of benzoxazine monomer and the high-performance of the cured resin remains a significant challenge. Using hydroxytyrosol and tyrosol derived from biomass raw materials, together with 3-ethynylaniline and polyformaldehyde, a monofunctional benzoxazine T-ac and a bifunctional benzoxazine HT-ac were synthesized through a solvent-free method. The chemical structure of two monomers was confirmed through NMR, FTIR and HRMS. Attributed to the presence of flexible hydroxyethyl groups in their structures, both of them have relatively low melting temperature ( T m ). The cured resins poly(T-ac) and poly(HT-ac) were obtained by thermal curing of the corresponding monomers. The research results showed that both of these resins have excellent heat resistant ( T g = 332 and 386 °C), superior thermal stability ( T di = 387 and 388 °C) and good flame retardancy (HRC = 134.3 and 57.1 J/g·K, THR = 12.1 and 7.1 kJ/g). Poly(HT-ac) has better performance, which is attributed to the formation of a denser three-dimensional cross-linked structure by the cross-linking of the bifunctional oxazine ring and the alkynyl group. Furthermore, the flame retardant mechanisms of the two resins were also thoroughly investigated. Poly(T-ac) and poly(HT-ac) both show good application prospects in fields such as high-frequency electronic substrates and high-temperature flame retardant composite materials.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Electrochemical Science
·
2026
·Vol. 21
·期 9
·101459
·
IF 3.9
Kaiwen Jiang,Dongxu Zhu,Zheng Liu,Jiayan Chen,Yuyan Xu,Shuai Gao,Huan Yang,XinGuo Xi
MnCo 2 O 4 is currently considered one of the promising alternatives to precious metal-based electrocatalysts. Nevertheless, their practical application is often limited by inadequate catalytic performance and insufficient stability. In this study, a surface reconstruction strategy was employed to synthesize the MnCo 2 O 4 -AT60–400 catalyst. When octahedrally coordinated manganese ions reacts with hydroxide ions in the acidic medium, resulting in formation of MnO 2 nanosheets on the spinel surface. Concurrently, tetrahedrally coordinated Co 2 + ions undergo leaching, leading to the formation of layered CoOOH on the MnCo 2 O 4 surface. The as-prepared MnCo 2 O 4 -AT60–400 electrocatalyst exhibits excellent oxygen evolution reaction (OER) activity in alkaline media, achieving an overpotential of 290 mV at a current density of 10 mA cm −2 . This performance significantly surpasses that of single-phase MnCo 2 O 4 and conventional RuO 2 electrocatalysts. These findings offer valuable insights and strategic guidance for the development of more efficient, durable, and cost-effective OER electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子