POLYMER COMPOSITES
·
2025
·
IF 4.7
Ran Li,Lifei Feng,Wenbin Yang,Huiping Lin,Yiqiang Wu
This study develops a functionalization strategy for incorporating cellulose nanocrystals (CNCs) into unsaturated polyester resin (UPR) to simultaneously enhance its strength and toughness. Surface modification of CNCs was achieved through sequential reactions with toluene diisocyanate (TDI) and hydroxyethyl acrylate (HEA), introducing carbon double bonds(CC) to obtain modified CNC (m-CNC). The m-CNC was subsequently compounded with UPR to fabricate composite materials. A comprehensive investigation of the composites' morphological features, mechanical performance, and thermal behavior was conducted through transmission electron microscopy (TEM), mechanical testing, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). Experimental results demonstrate that 0.3 wt% m-CNC incorporation markedly improves UPR's mechanical properties, with the composite exhibiting 23.55% higher tensile strength, 59.01% increased flexural strength, and 96.16% enhanced impact resistance compared to unmodified UPR. DMA characterization revealed that covalent cross-linking between m-CNC and the UPR matrix restricts polymer chain mobility, resulting in a 35.4% elevation in storage modulus. TGA data confirmed the heat resistance improvement, showing 12.8°C and 9.3°C increases in thermal decomposition temperatures for m-CNC/UPR composites relative to pure UPR and unmodified CNCs/UPR systems, respectively. This synergistic modification approach effectively balances structural integrity preservation of CNCs with significant enhancement of UPR's multifunctional performance, demonstrating potential applications in automotive, construction, new energy, and eco-friendly packaging industries. It emerges as a promising alternative to conventional composite materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Sijia Zheng,Huige Ren,Haiyan Xue,Lingqi Huang,Jianfeng Zhang,Zhihai Cao
With the emergence of soft electronics, composite materials with a combination of robust adhesion, reprocessing and recycling capability, electrical and thermal conductivity, and biocompatibility are highly required. α-Lipoic acid–based silicone composites are fabricated by a simultaneous ring-opening reaction of epoxide-functionalized silicone with α-lipoic acid and ROP of α-lipoic acid. The liquid metal (LM) is incorporated via −COOH-LM- and -S-LM- coordination. The resultant LM-LAPs exhibited robust adhesion to various substrates. The LM-LAPs exhibited efficient reprocessability and recycling capability enabled by carboxylic groups, disulfide exchange, and depolymerization of the disulfide backbone. Thermal and electrical conductivity reach 2.35 W m–1 K–1 and 19.48 S m–1 for LM-LAP70. Notably, the optimized LM-LAP50 was successfully used in monitoring body movement. This design offers a new route for creating silicone elastomers with technological implications for flexible electronics.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2025
·
IF 3.9
Haojie Sun,Chunfeng Mao,Jingxuan Xu,Qinyi Li,Yuanhao Mao,Lanjing Zhao,Shengyan Li
Maximizing the mass transfer rate and enhancing the effective spread of active sites and recovery of catalysts between various stages of reaction could help to realize catalytic oxidative performance. Colloidal catalysts can break through the bottleneck problems between solid and liquid catalysts. In this work, colloid Zr-MOFs materials were prepared for the first time as support, and CDUT-Colloid catalysts were prepared by combination with liquid active components. Catalysts exhibit efficient mass transfer characteristics and high dispersion of active sites characteristic of ILs, while possessing the advantages of easy recovery and high stability. The oxidative desulfurization performance approaches 100% under mild reaction conditions (m(CDUT-Colloid-2) = 0.5 g, t = 90 min, n(O)/n(S) = 10, 30 °C). This catalyst exhibits excellent recycling performance, stability of structure, absorbability, and suitable viscosity. The proper viscosity of the colloidal catalyst facilitates phase transfer at the interface, accelerating the transfer of sulfide from the oil phase to the colloidal phase. The phase interface after the reaction is easy to separate, ensuring purity of the final oil. Based on structural analysis, desulfurization performance, and the capture experiment of the transition state (•OH), the oxidative desulfurization reaction mechanism of the colloidal catalytic system can be obtained. The catalytic reaction mechanism can be divided into two steps of collaborative catalysis, which can reveal the uniqueness of the colloidal catalyst in the reaction process. This unique colloidal catalyst provides a research approach for catalysts and lays the foundation for the study of functional materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER COMPOSITES
·
2025
·
IF 4.7
Mingjin Tang,Huanhuan Lu,Xianjuan Pang,Yixuan Wang,Xiaoxuan Yang,Jianxin Xue,Lulu Wang,Shuai Wang,Chenfei Song,Yongzhen Zhang,Jie Li
Carbon fiber (CF)-reinforced polyether ether ketone (PEEK) composites exhibit excellent comprehensive properties. However, the inert surface and poor wettability of CF reduce the interfacial performance in CF/PEEK composites, thereby limiting their applicability in harsh environments. To address this limitation, CF was chemically grafted using two modifiers: a polyethyleneimine (PEI) sizing agent containing carboxylated multi-walled carbon nanotubes (MWCNTs), and a polyamidoamine (PAMAM) coupling agent also containing carboxylated MWCNTs. The amino groups in PEI and PAMAM can form amide bonds with carboxylated CF. Additionally, the long-chain structure of PEI physically entangles the CF, and its π–π conjugation with the PEEK matrix enhances interfacial bonding. As a result, CF-PEI-MWCNTs/PEEK composites (0.3 wt.% MWCNTs) demonstrated superior interfacial properties compared to CF-PAMAM-MWCNTs/PEEK composites (0.5 wt.% MWCNTs). The wear resistance of the composite is improved, and the wear mechanism changes from plastic deformation to mild adhesive wear.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2025
·
IF 3.2
Xin Shi,Yuan Wu,Guihan Hu,Ying Li
There is a strong correlation between physical health and metal ion levels in biological fluids, making them an attractive analyte for noninvasive health monitoring. Given the pressing need for multiple metal ions recognition and simultaneous detection within the human body, this study devised a multi-emission fluorescence sensor based on ATA luminescent ligands and lanthanide complexes. It responded differently to metal ion attack at various pH (at 6, 7, 8) conditions, generating multivariate cross-reactions. Through principal component analysis and Extra Trees algorithm analysis, a superior analytical performance pH-regulated lanthanide fluorescence sensor array was developed, capable of accurately identifying and quantifying ten kinds of metal ions, discriminating binary/ternary mixtures, and maintaining high selectivity in the presence of interference substances with an accuracy of up to 100%. This platform sidesteps the synthesis of multiple transducers, providing a novel strategy for constructing facile and feasible fluorescence sensing arrays based on lanthanide complexes. Notably, the proposed sensor array can enable noninvasive detection of metal ions in biological fluids, highlighting its potential application for diagnosing metal ion-related diseases.
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2025
·
IF 4.3
Hushuan Huo,Zihang Shao,Xiangwei Meng,Shiyu Lv,Tao Li,Xudong Huang,Zengxi Wei,Qian Sun,Shuangliang Zhao
Pesticides are widely used to ensure crop yields and quality in agriculture. However, most pesticides are easily decomposed, leading to the overuse of pesticides for long-lasting control of pests and diseases, which pose serious hazards to the environment and human health. Herein, we propose a strategy to prepare hollow porous silica nanoparticles (SiO2 NPs) using 1,3,5-trimethylbenzene (TMB) as a pore-expanding agent and CaCO3 NPs as templates. The hollow SiO2 NPs obtain an average particle size of 121 nm and a shell thickness of approximately 15 nm and can be easily prepared with adjustable pore sizes ranging from 1.4 to 4.6 nm without using any surfactants. More importantly, these SiO2 NPs can be used for pesticide encapsulation and controlled release, achieving an encapsulation efficiency of 47% for avermectin and 38% for pyraclostrobin as well as outstanding ultraviolet shielding abilities. Based on the above results, a new release model is built to precisely predict and analyze the pesticide release of SiO2 NPs, showing that the experimental results are consistent with the predicted outcomes, which are further verified by the release performance by the SiO2 NPs with various BET surface areas. Our release model is promising for accurately predicting the drug release performance of hollow porous materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEDICINAL CHEMISTRY
·
2025
·
IF 6.8
Yang Zhou,Juhong Wu,Haili Lin,Meiru Song,Lina Deng,Yuhan Mai,Zhiyou Wang,Nannan Zeng,Wei Zhang,Yichang Liu,Longguang Jiang,Cai Yuan,Mingdong Huang,Jinyu Li,Peng Xu
Antimicrobial peptides (AMPs) are powerful tools in combating drug-resistant bacteria. However, their clinical application is hindered by poor pharmacokinetics and suboptimal antimicrobial activity. This study proposes a strategy to enhance the antimicrobial activity and biosafety of AMPs by modification with albumin-binding molecules (ABMs). This strategy was validated by employing two model peptides with moderate antimicrobial efficacy. First, ABM modification stabilizes the secondary structures, facilitating bacterial membrane disruption. Additionally, modified AMPs target albumin in blood vessels, reducing renal clearance in vivo. Moreover, this binding minimizes contact with blood and endothelial cells, consequently diminishing vascular toxicity without compromising antimicrobial activity. Molecular dynamic simulations followed by experimental validation revealed new molecular insights into the mechanism underlying AMP-mediated membrane disruption, confirming our design strategy. This dual mechanism, structural stabilization and albumin-mediated pharmacokinetic enhancement, addresses the key limitation of AMPs, offering a versatile approach to develop potent, systemically safe antimicrobial therapies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Qiaoyu Liu,Sili Xiao,Yun You,Xiaoxia Huang,Xianling Wei,Junmeng Yan,Hao Dong,Xiaofang Zeng,Weidong Bai
The tendency of myofibrillar proteins to adsorb fishy off-flavor impairs processing properties. This study uses natural phenolics to release odors from proteins. The mechanisms underlying the promotion of key fishy off-flavor compounds (KFOCs) released by Pyrogallic acid (PA) through interactions with the myofibrillar protein (MP) of Tilapia were investigated. Fluorescence spectroscopy confirmed the formation of a 1: 1 temperature-sensitive PA-MP complex via static quenching. PA caused significant changes in MP conformation and significantly increased KFOCs release from MP in a dose-effect manner. Molecular docking and molecular dynamics further revealed hydrophobic interactions and hydrogen bonding drove the formation of MP/PA and MP/KFOCs complexes. Binding sites for PA and KFOCs were identified near the Ser129-Glu135 and Asn179-Ser183 residues of myosin. PA exhibited a preferential affinity for myosin binding, thereby influencing the release of KFOCs through competitive interactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemistrySelect
·
2025
·Vol. 10
·期 23
·e02743
·
IF 2
Xiaoling Xie,Jingyuan Tian,Junying Wu,Ruijie Guo,Jie Zhang,Dongsheng Fu,Huifang Wang,Baolong Niu,Hong Yan
Graphical The novel antibacterial agent CuO@γ-CD-MOFs was synthesized and then incorporated into the PLA/PBAT composite films for food packing materials. The films exhibited superior antibacterial activity and strong UV-blocking ability and water vapor barrier property. Besides, the complementary PLA and PBAT endowed the composite films with enhanced elongation at break compared with that of brittle PLA, and higher tensile strength than PBAT. The biosafe and reusable γ-CD-MOFs were employed as the copper oxide (CuO) carriers to counter the agglomeration of CuO nanoparticles (NPs); and such a novel antibacterial agent CuO@γ-CD-MOFs was synthesized by a facile and eco-friendly direct calcination approach, and then incorporated into the polylactic acid (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) composite films for food packing materials. The effect of the CuO@γ-CD-MOFs nanoparticles on the antibacterial and physical properties was investigated, and the films with 5% CuO@γ-CD-MOFs NPs content displayed the optimal comprehensive performance. Specifically, the composite films PPM-5 exhibited superior antibacterial activity with the inhibition rates against Staphylococcus aureus and Escherichia coli exceeding 95%, which attributed to the uniformly dispersed CuO nanoparticles by metal organic frameworks (MOFs) carrier. Besides, the films provided strong UV-blocking ability and water vapor barrier property. Furthermore, the complementary PLA and PBAT endowed the composite films with enhanced elongation at break compared with that of brittle PLA, and higher tensile strength than PBAT. MTT assay confirmed the satisfactory biocompatibility. The composite films are expected to find great applications in the field of biodegradable food packing.
✓ 已验证
产品关联
DOI
高影响因子
Science Advances
·
2025
·Vol. 11
·期 26
·
IF 12.5
Ganguang Yang,Yuqi Qiu,Bo Pang,Wei Guo,Shaoyu Liu,Qingyang Zheng,Sen Zhou,Jia Tian,Wei Liu,Bin Xie,Tianzhao Bu,Changsheng Wu,Zhouping Yin,Yutian Liu,Hao Wu
Achieving accurate locating of perforating arteries (PAs) has great clinical value in various biomedical applications, such as free flap transfer. However, the anatomical variability of these arteries presents a major challenge in PA locating, and existing methods have various disadvantages, limiting their applications. Here, we propose a reusable and flexible hydrogel biosensor array for noninvasive, precise, and efficient PA locating. Particularly, we develop electrically responsive hydrogels to establish rapidly detachable device/hydrogel interfaces, endowing the reusability of the biosensor array. Meanwhile, the adhesion of hydrogel/skin interfaces is also enhanced to facilitate high-fidelity signal acquisition. By analyzing the photoplethysmography (PPG) infrared (IR) signals, the biosensor array can accurately and responsively locate PAs across different types of free flaps in clinical cases, outperforming existing techniques. This biosensor array represents a promising platform for PA locating. The strategy of hydrogel interface design paves the way for the development of reusable flexible electronics in biomedical applications to avoid cross-infection and reduce device costs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Huiying Yan,Youpeng Ding,Shumin Lin,Jialiang Li,Yanan Zhao,Zewen Lin,Jinmeng Zhang,Jie Bai,Xiaolan Hu,Hua Bai
Structural energy storage devices, capable of storing energy while simultaneously bearing mechanical loads, are gaining significant interest in aerospace, electric vehicles, and portable electronics. However, the commonly used carbon fiber fabric current collector/reinforcement occupies a disproportionately large share of the device’s mass and volume, thereby limiting the overall energy density of the device. In this paper, we present a device architecture in which an integrated graphene/conducting polymer composite film is used to replace the conventional carbon fiber fabrics to serve as both the current collector and mechanical reinforcement in structural supercapacitors. Owing to the high specific capacitance of the composite film, the new devices exhibit a high specific capacitance of 62.5 mF cm–2 and energy density of 6.1 μW h cm–2 at a current density of 0.2 mA cm–2, corresponding to volumetric energy density of 0.14 mW h cm–3, and gravimetric energy density of 31.2 mW h kg–1. Those values far surpass those of the counterparts using carbon fiber fabrics. To further enhance load-bearing and energy storage performance, multilayer devices are developed. A seven-layer device demonstrated a flexural strength of 19.0 MPa and, through series-parallel connections of internal electrodes, achieved a large working voltage of 4.5 V, or a high specific capacitance of 161.1 mF cm–2 and energy density of 14 μW h cm–2. This work demonstrates the potential of graphene composite film electrodes in structural energy storage applications and provides a new pathway toward achieving high-performance structural energy storage devices.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2025
·Vol. 17
·期 25
·5298-5307
·
IF 2.6
Yang Cao,Chun Huang,Kui Li,Xi Zhang,Mengfei Tong,Jiale Tu,Kun Yang,Shuai Yuan,Hong Zhang
To sensitively detect ochratoxin A (OTA), a CRISPR/Cas12a-assisted electrochemiluminescence (ECL) aptasensor based on COF@Ru coupled with a DNA tetrahedral scaffold (DTS) was successfully fabricated. The covalent organic framework (COF) acted as a confined micro-reactor for the tris(2,2′-bipyridyl)ruthenium(II)/tri-n-propylamine (Ru(bpy)32+/TPrA) system and hence, evidently enhanced ECL signals. Au nanoparticles (AuNPs) coupled with DTS caused more ferrocene (Fc)-modified quenching DNA probe molecules to be attached to the surface of the sensing electrode, which could reduce the detection background. Activated CRISPR/Cas12a could effectively amplify the ECL signal since it could cut off a considerable amount of quenching DNA probe molecules and make them move away from the electrode. Owing to these strategies, the fabricated ECL aptasensor could detect OTA as low as 3.5 fg mL−1 in a linear detection range of 10−5–100 ng mL−1. Furthermore, the CRISPR/Cas12a and COF@Ru coupled with DTS-based ECL biosensor possessed high stability and specificity. More importantly, the ECL biosensor could effectively detect OTA in food samples, indicating that it can play a role in monitoring OTA levels in the field of food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子