Science China-Chemistry
·
2025
·
IF 9.7
Liu Jie,Ye Qiu,Wu Yi,Chen Junliang,Ge Yongjie,Zhang Linjie,Abazari Reza,Qian Jinjie
Molecular catalysts like metal phthalocyanines (MPc) hold significant promise for diverse applications in renewable energy conversion and storage. Despite their inherent catalytic activity in the oxygen reduction reaction (ORR), enhancing their practical applicability necessitates addressing challenges in electrical conductivity and catalytic stability through effective control of electron distribution within the substrate. In this work, we have successfully synthesized an electrocatalyst featuring FePc molecules anchored onto N,S co-doped carbon nanorods from a pillar-layer metal-organic framework (MOF), designated as ZTB-NSCR-FePc. This MOF-derived heteroatom-doped carbon substrate could be easily obtained by direct pyrolysis of a pre-fabricated rod-like Zn-TDC-bpy. The optimized ZTB-NSCR-FePc demonstrated exceptional electrocatalytic efficiency and stability towards ORR with a positive half-wave potential of 0.890 V. When employed in a Zn-air battery, it outperformed the benchmark Pt/C air cathode, achieving a peak power density of 198.9 mW cm −2 . Finally, theoretical calculations revealed that short-range electron interactions between N/S atoms and the graphene substrate significantly enhance the anchoring effect of FePc, improve the adsorption of reaction intermediates, and thereby boost the ORR performance.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Chunhua Li,Luqian Bao,Yubo Shi,Zhehang Tian,Yixin Ji,Mengyao Cui,Zhilei Zhao,Xianyou Wang
A hollow heterojunction of W-Zr-MOF-NH 2 @TpTt-COF (WZT) was fabricated by combining etched W-Zr-MOF-NH 2 with TpTt-COF. WZT, synthesized through acid etching and hydrothermal methods, showed better tetracycline degradation than pure W-Zr-MOF-NH 2 and pure TpTt-COF due to its larger specific surface area and more active sites. The surface of WZT contains abundant oxygen vacancies (OVs) that capture electrons, promoting the separation of photogenerated e - -h + pairs and increasing WZT’s photocatalytic activity. WZT (1:1, mass) showed 87% degradation of tetracycline under 300 W Xenon lamp irradiation. The results of cycling experiments demonstrated the high stability and reusability of WZT (1:1), making it feasible for production. The excellent photocatalytic degradation of tetracycline by WZT (1:1) originates from the formation of heterojunctions and the presence of surface OVs, which reduces the strong photogenerated e - -h + complexation efficiency. Possible photocatalytic degradation mechanisms are proposed while demonstrating the formation of Z-scheme heterojunction in WZT, which aligned with the experimental results of electron spin resonance (ESR). The tetracycline oxidative decomposition process involves the participation of •OH, 1 O 2 , • O 2 - , e - , and h + as proven by ESR and radical trapping experiments. This work proposes a research idea to prepare high-performance photocatalysts with MOF@COF type, featuring OVs-rich and Z-scheme heterojunctions.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xiaoyue Zhou,Zhenjie Li,Yingxi Shi,Yingqi Miao,Yunying Liu,Renli Yin,Wanqian Guo,Junhao Qin,Huashou Li,Adela Jing Li,Rongliang Qiu
Bisphenol A (BPA) has raised worldwide concern owing to its ecological risks, highlighting the urgent need to develop efficient removal strategies in wastewater treatment. A metal–organic framework (Bio-MOF-1) piezoelectrically activating peroxymonosulfate (PMS) process (Bio-MOF-1/PMS/US) was developed to remove BPA at 98.5%, which was 3.5 times higher than the Bio-MOF-1/US process. Further analysis confirmed that the piezoelectric field initiated by Bio-MOF-1 could reduce the activation energy of PMS and then promote the reaction of PMS with holes and electrons to convert into 1 O 2 and OH. The steady-state concentration of 1 O 2 was 4 orders of magnitude higher than OH, indicating the dominant contribution of 1 O 2 for BPA removal, which resulted in the efficient BPA removal from a variety of anions, organics, and municipal wastewater through a low-risk manner. This work provides new perspectives for the application of MOF-based materials in the field of piezoelectric catalysis and promising applications in wastewater remediation.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Shudi Yu,Nannan Zhang,Jie Li,Jiongting Yin,Yong Wang,Zhengying Wu,Yangping Zhang,Yukou Du
A metal–organic framework (MOF) embedded by transition metal sulfide (TMS) particles is one of the promising electrocatalyst candidates for overall water splitting (OWS) due to the large surface area and abundant active sites from the MOF precursor, as well as the tunable electronic structure and higher intrinsic conductivity of TMS. More importantly, its self-restructuring under alkaline conditions will lead to the chemical composition and phase evolution of the catalyst surface, which is the source of its further enhanced catalytic activity. A semi-MOF (labeled as Co@Ni/Fe-MS/MOF) with MOF as the semisacrificial template and a TMS particle as the guest was designed by exercisable and universal heteroatomic Co doping and partial vulcanization. The TMS/MOF heterostructure establishes an ideal bridge for electron transfer. Simultaneously, the dopant Co and the synergistic effect of multiple metal sites also effectively regulate the charge environment around the catalytic sites, which jointly improve the adsorption/desorption kinetics of the reaction intermediates. As a result, Co@Ni/Fe-MS/MOF exhibits a distinguished overpotential (η10 = 229 mV for OER, η10 = 174 mV for HER) and Tafel slope (52.37/114.35 mV dec–1 for OER/HER), as well as unrivaled long-term durability (80 h for OWS). Moreover, the two-electrode Co@Ni/Fe-MS/MOF ∥ Co@Ni/Fe-MS/MOF cell illustrates a small cell voltage of 1.54 V to achieve a power of 10 mA cm–2. Impressively, this superior OER property comes from the three-layer sandwich structure restructured by the hybrid semi-MOFs in the alkaline environment as the true active sites. This work aspired to regulate the electronic structure of the catalyst, induce synergistic effects, and shed light on the preparation of hybrid semi-MOF materials by heterogeneous interface engineering, doping engineering, and phase evolution.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Tongguang Zhu,Hang Zhao,Na Zhang,Chuying Zhang,Jinbo Bai
Polymer-based capacitors are essential energy storage components in the electronic and electrical industries, which is benefit for their high power density and fast charge–discharge capabilities. However, the low energy density of polymer-based capacitors limits their miniaturization and intelligent applications. In this study, we present the novel poly(vinylidene fluoride) (PVDF)-based composites with exceptional energy storage performance at the submicron metal filler loadings. Guided by synergistically improving the dielectric constant and breakdown strength of polymer-based composites, metal–organic framework (MOF)-derived Fe fillers and Press & Heat (P&H) cycles are mainly implemented. The polymer-based composites exhibit a superior dielectric constant of 15.3, while simultaneously maintain a high breakdown strength of 617.1 MV/m. The excellent energy density of 28.9 J/cm 3 is obtained at the ultralow filler loading of 0.2 wt%. Synergistic tuning the loading content of MOF-derived Fe and optimizing the P&H cycles not only leads to a novel composite dielectrics with outstanding energy storage properties, but also presents a new strategy for exploring high-performance capacitive polymer composites.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Leikeqing Shen,Xueping Dang,Huaixia Chen
The development of adsorption materials with good stability and high efficiency is significant in solid-phase microextraction (SPME). In this work, metal–organic framework MOF-808 (Zr) was modified by trifluoroacetic acid (TFA) to improve its hydrophobicity. MOF-808-TFA was electrochemically deposited on stainless steel wire with poly (3, 4-ethylenedioxthiophene) (PEDOT) to increase its extraction efficiency. The main parameters in the synthesis and extraction procedure were optimized. The prepared MOF-808-TFA@PEDOT nanocomposite coating was characterized by scanning electron microscopy, energy dispersive spectrometer, X-ray diffraction, Fourier transform infrared spectrometry and thermogravimetric analysis. A direct immersion solid-phase microextraction (DI-SPME) method for six phenols was developed based on the nanocomposite coating which had good service life (150 times). The extraction efficiency was 12 times higher than the commercial PDMS coating. Combined with gas chromatography-flame ionization detector (GC-FID), a simultaneous determination method for the six phenols was established, which exhibited wide linear range with 0.05–50 μg L −1 ( R 2 > 0.99). The limit of detection was 0.01–0.08 μg L −1 (S/N = 3), and the limit of quantification was 0.05–0.25 μg L −1 . The method was applied to determine the migration quantity of phenols from four metal cans with recovery rate between 85.6–116.8 % (RSD < 13.9 %), and it was verified by standard GC–MS method and SPSS statistical analysis. These results indicated the DI-SPME-GC-FID method had reliability and potential application in security testing for food contact materials.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2024
·
IF 3.7
Tao Wei,Mengting Wang,Yanyan Zhou,Xingtong Guo,Sijia Wang,Ye Liu,Cheng Sun,Qian Wang
ABSTRACT At present, commercial Li-ion batteries are hardly to satisfy the growing demand for high energy density , for this purpose, lithium metal batteries have attracted worldwide attention in recent years. However, its practical applications are hindered by the formation of Li dendrites and volume effect during Li plating/stripping process, which leads to a lot of safety hazards. Herein, we first employed MOF-derived V 2 O 5 nanoparticles to decorate the carbon fiber cloth (CFC) backbone to acquire a lithiophilic 3D porous conductive framework (CFC@V 2 O 5 ). Subsequently, the CFC@V 2 O 5 skeleton was permeated with molten Li to prepare CFC@V 2 O 5 @Li composite anode. The CFC@V 2 O 5 @Li composite anode can be stably cycled for more than 1650 h at high current density (5 mA·cm −2 ) and areal capacity (5 mA·h·cm –2 ). The prepared full cell can initially maintain a high capacity of about 143 mA·h·g −1 even at a high current density of 5 C, and can still maintain 114 mA·h·g −1 after 1000 cycles.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Zixian Qin,Yuxiu Sun,Zhengqing Zhang,Chenxu Zhang,Chi Tang,Chenxu Geng,Zhihua Qiao
Oxygen/nitrogen (O 2 /N 2 ) separation is of great importance but faces huge challenges owing to their similar molecular size and close polarity. In this work, we construct a polymer of intrinsic microporosity (PIM-1) based mixed matrix membrane (MMM) for efficient O 2 /N 2 separation by using ZIF-8 as the sieving filler along with surface modification of o-carborane (o-CB) to strengthen selective N 2 adsorption fixation as well as polymer-filler interfaces. Markedly, the o-CB on the outer surface of ZIF-8 not only affords the requisite interfacial compatibility in molecular sieving MMMs, but also increases the diffusion difference between O 2 and N 2 by the preferential adsorption with N 2 molecules. This synergistic effect of molecular sieving and adsorption inhibition achieves efficient O 2 /N 2 diffusion differential separation. As expected, the optimal membrane with o-CB-ZIF-8 loading of 35 wt% exhibits an O 2 permeability of 796.5 Barrer and a mixed O 2 /N 2 selectivity of 8.9 with O 2 /N 2 (20:80, vol.) mixtures, exceeding the latest 2015 upper bound limits. Moreover, the according membrane module with o-CB-ZIF-8 loading of 20 wt% also displays moderate O 2 permeability of 391.7 Barrer and O 2 /N 2 selectivity of 5.5 under pressure of 1 bar. This work may provide a feasible platform for designing high-performance MOF-based membranes in air separations.
✓ 已验证
产品关联
DOI
高影响因子
Chemosensors
·
2024
·Vol. 12
·期 9
·187
·
IF 3.7
Yuyu Peng,Chunyan Wang,Gen Li,Jianguo Cui,Yina Jiang,Xiwang Li,Zhengjie Wang,Xiaofeng Zhou
In this study, a MOF-199/Ag@Au SERS sensing structure was successfully synthesized by combining metal–organic frameworks (MOFs) with surface-enhanced Raman scattering (SERS) technology for the efficient detection of dopamine (DA), a biomarker for neurological diseases, in serum. Using electrochemical methods, a copper-based MOF (MOF-199) was synthesized in situ on copper substrates and further deposited with silver nanoparticles (AgNPs). Subsequently, gold nanoshells were encapsulated around these silver cores by in situ chemical deposition. This preparation process is simple, controllable, and inexpensive. Furthermore, a novel Azo reaction-based DA SERS method was proposed to detect 1 pM DA, which represents an improvement in sensitivity by two orders of magnitude compared to previous unlabeled SERS detection methods and by four orders of magnitude compared to another SERS approach proposed in this work. There was an excellent linear relationship (R2= 0.976) between the SERS signal at 1140 cm−1and the DA concentration (0.001 M~1 pM). The results indicate that the MOF-199/Ag@Au sensor structure can successfully achieve both the qualitative and quantitative detection of DA in serum, thus providing a robust technical basis for the application of SERS technology in the field of clinical neurological disease screening.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Chengzhan Yan,Xin Chao,Huaping Zhao,Shun Wang,Yong Lei
Amorphous carbon materials with sophisticated morphologies, variable carbon layer structures, abundant defects, and tunable porosities are favorable as anodes for potassium-ion batteries (PIBs). Synthesizing amorphous carbon materials typically involves the pyrolysis of carbonaceous precursors. Nonetheless, there is still a lack of studies focused on achieving multifaceted structural optimizations of amorphous carbon through precursor formulation. Herein, nitrogen-doped amorphous carbon nanotubes (NACNTs) are derived from a novel composite precursor of cobalt-based metal–organic framework (CMOF) and graphitic carbon nitride (g-CN). The addition of g-CN in the precursor optimizes the structure of amorphous carbon such as morphology, interlayer spacing, nitrogen doping, and porosity. As a result, NACNTs demonstrate significantly improved electrochemical performance. The specific capacities of NACNTs after cycling at current densities of 100 mA/g and 1000 mA/g increased by 194 % and 230 %, reaching 346.6 mAh/g and 211.8 mAh/g, respectively. Furthermore, the NACNTs anode is matched with an organic cathode for full-cell evaluation. The full-cell attains a high specific capacity of 106 mAh/g cathode at a current density of 100 mA/g, retaining 90.5 % of the specific capacity of the cathode half-cell. This study provides a valuable reference for multifaceted structural optimization of amorphous carbon to improve potassium-ion storage capability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2025
·
IF 11.6
Yuan Liu,Rong Li,Muhe Li,Yuchang Qing
The resin matrix composite endowed with wide-frequency (4–18 GHz) absorption functionality remains a challenging issue in the current research of microwave absorption materials. Herein, we have developed coral-like Co@NCP reinforced polylactic acid resin (PLA) composites featuring wide-band absorption through cross-scale design, thereby breaking through the current bottleneck of narrow effective absorption band (EAB). Multiple electromagnetic (EM) loss mechanisms, encompassing conductivity loss, dipole polarization, interface polarization and coupling effect were established and optimized by conducting Co-doped defect design at the atomic scale, CoC x -Co x P heterogeneous interface design at the nano scale and periodic design at the millimeter scale. The wide absorption in the frequency of 2.0–17.4 GHz of Co@NCP composite is accomplished by the frequency response characteristic of the cooperative multiple absorption mechanism. Accordingly, combined with special cylindrical periodic structure design, the metamaterial absorbers exhibit remarkable EM wave absorption performance (e.g., actual EAB in 15.4 GHz and simulated reflectivity in −65.5 dB). Moreover, large-scale production of the metamaterial absorbers at low costs are realized, which has tremendous application potentiality for developing EM wave absorbers with superior performance.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Yingfei Hui,Yuli Wei,Hao Guo,Mingyue Wang,Liping Peng,Borong Ren,Yanyan Ma,Wu Yang
Glyphosate (Gly) overuse threatens public health and ecosystems, necessitating highly sensitive detection. This work developed a novel ratiometric fluorescent probe, CDs@Cu-MOF/TMTA-COF, by integrating carbon dots (CDs), metal organic frameworks (MOFs), and covalent organic frameworks (COFs). We encapsulated CDs within Cu-MOF in-situ grown onto sp 2 ‑carbon conjugated TMTA-COF. Gly binding to Cu 2+ causes MOF structural collapse, releasing CDs and enhancing its fluorescence at 425 nm. Simultaneously, Gly inhibits competitive absorption and acceptor-photoinduced electron transfer process between TMTA-COF and Cu-MOF, increasing COF fluorescence at 550 nm. This dual-signal change enables ratiometric Gly detection from 0.2 to 40 μM, with a detection limit of 0.07 μM. This probe was successfully used to measure Gly in soil, Yellow River water and soybean (recoveries: 95.3–104.1 %). Additionally, the back propagation neural network further enables fast detection of Gly. This work demonstrates the potential of MOF/COF hybrids for fluorescence sensing for pesticide analysis and paves the way for intelligent sensing platforms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子