ENVIRONMENTAL RESEARCH
·
2021
·
IF 6.498
Hui Zhao,Cheng Tian,Jian Mei,Shijian Yang,Po Keung Wong
Two different morphologies of Fe 2 O 3 involving nanodots and nanosheets were deposited on g-C 3 N 4 nanosheets by simple in-situ deposition and impregnation-hydrothermal methods, respectively. Structural effect of Fe 2 O 3 on photo-Fenton-like activity and charge transfer at the interface in these two g-C 3 N 4 /Fe 2 O 3 hybrids were studied. Detail characterizations on charge transfer kinetics revealed that g-C 3 N 4 /nanodot-Fe 2 O 3 structure showed faster electron injection rate and higher injection efficiency (≈0.084 ns −1 and ≈27.5%) than g-C 3 N 4 /nanosheet-Fe 2 O 3 counterpart (≈0.054 ns −1 and ≈19.5%). Stronger intimate junction between g-C 3 N 4 nanosheets and Fe 2 O 3 nanodots was believed to be the reason for faster and more efficient electron injection. In addition, stronger interaction with tetracycline and higher reactivity with H 2 O 2 at the interface were observed for g-C 3 N 4 /nanodot-Fe 2 O 3 compared with g-C 3 N 4 /nanosheet-Fe 2 O 3 . Thereby, under visible light stimulation, g-C 3 N 4 /nanodot-Fe 2 O 3 demonstrated higher photo-Fenton-like tetracycline removal efficiency and rate (≈87% and ≈0.037 min −1 ) than g-C 3 N 4 /nanosheet-Fe 2 O 3 (≈57% and ≈0.016 min −1 ). Furthermore, g-C 3 N 4 /nanodot-Fe 2 O 3 junction can remain robust catalytic performance under various conditions (recycle experiment, real environment, different initial pHs and temperatures, anion coexistence, and other contaminants removal) and possible tetracycline degradation pathways were proposed. This study provided deep insights into structure-activity relationship and electron transfer between g-C 3 N 4 and nanostructured Fe 2 O 3 , which can open a new avenge to develop Fe 2 O 3 -based photo-Fenton catalysts with high efficiencies for antibiotic wastewaters remediation.
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2019
·
IF 5.108
Nannan He,Shihai Cao,Lihao Zhang,Zhidan Tian,Huan Chen,Fang Jiang
The porous graphitic carbon nitride nanosheets (PCNSs) with high yields were synthesized by using one–step chemical exfoliation method. PCNSs accelerated separation efficiency of photo-generated electron−hole pairs in comparison to bulk graphitic carbon nitride. The PCNS5 (exfoliation for 5 h) exhibited optimal photocatalytic disinfection capability towards Escherichia coli K-12 under simulated solar light irradiation with complete disinfection of 6.5 log 10 cfu/mL of E. coil K-12 within 2 h. The enhanced photocatalytic activity of PCNS5 originated from mesoporous nanosheet structure. The possible mechanism of photocatalytic disinfection has proposed that intracellular reactive oxygen species levels and the activities of antioxidant enzymes (e.g., catalase and superoxide dismutase) were enhanced. Transmission electron microscope images observed during photocatalytic disinfection process suggested that the cell membrane was regarded as the first target for oxidation, resulting in a faster leakage of cytoplasmic content and finally degradation of DNA leading to bacterial death. Furthermore, the trapping experiment showed that superoxide radical (•O 2 − ) and holes (h + ) were responsible for E. coli K-12 disinfection by PCNS5.
✓ 已验证
DOI
高影响因子
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY
·
2021
·
IF 6.291
Qingguo Chen,Yan Hao,Zhao Song,Mei Liu,Dongzhi Chen,Baikang Zhu,Jianmeng Chen,Zhi Chen
Degradation of norfloxacin (NFX) by zinc oxide (ZnO)/g-C 3 N 4 , a magnetic sheet ZnO with g-C 3 N 4 on its surface was studied. Through a new preparation system method, hydrothermal reaction provides a solid-layered magnetic ZnO material basis, and the simple thermal condensation method was used to transform the urea into g-C 3 N 4 on the magnetic sheet ZnO in a uniform and orderly manner to increase the stability and photocatalytic performance of the material. Compared with previous studies, the pore volume and photocatalytic performance of the material are improved, and became more stable. By studying the degradation effect of basic and photocatalytic materials prepared in different proportions, the kinetic constant of ZGF is 0.01446 (min −1 ). The response surface methodology (RSM) was used to study the optimization and effect of solution pH (4−12), photocatalyst concentration (0.2–1.8 g/L), and NFX concentration (3–15 mg/L) on the degradation rate of NFX during photocatalytic degradation. The R 2 value of the RSM model was 0.9656. The NFX removal rate is higher than 90% when the amount of catalyst is 1.43 g/L, the solution pH is 7.12, and the NFX concentration is less than 8.61 mg/L. After 5 cycles, the degradation rate of magnetic materials decreased to 92.8% of the first time. The capture experiment showed that the photocatalytic machine Toxicities was mainly hole action. The TOC removal rate within 2 h was 30%, a special intermediate toxicity analysis method was adopted according to the characteristics of NFX's inhibitory effect on Escherichia coli community. The toxicity of degraded NFX solution disappeared, and the possibility of non-toxic harm of by-products was verified. LC-Q-TOF method was used to detect and analyze various intermediate products converted from NFX after photocatalytic degradation, and the photocatalytic degradation pathway of NFX was proposed.
✓ 已验证
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2024
·
IF 4.3
Jin Chen,Suqing Qin,Xiaofeng Yang,Yueying Wang,Tai Yang,Meidan Que,Yuzhao Ma,Yanjun Li
BiOBr can effectively mitigate the ecological and environmental problems caused by pollution with antibiotics, and its photocatalytic properties can be improved by utilizing heterojunction structures and cocatalysts. In this study, the Z-scheme heterojunction ternary photocatalyst BiOBr/g-C 3 N 4 /CQDs (BCC x ) was obtained by using an uncomplicated electrostatic self-assembly process. The incorporation of carbon quantum dots (CQDs) with high conductivity provided a conduit for charge transfer between g-C 3 N 4 and BiOBr. The loading density of CQDs on BiOBr/g-C 3 N 4 could be rapidly adjusted by changing the concentration of the CQDs precursor in solution. The presence of CQDs enhanced the absorption of visible light and inhibited the synthesis of photogenerated charge carriers, thereby resulting in a synergistic effect on the Z-scheme heterojunction and improving the photocatalytic properties under visible light. In particular, BCC50 had the highest catalytic performance, with a tetracycline pollutant degradation efficiency of 100% within 60 min. The degradation efficiency remained above 95% even after repeated use in five cycles. The principles of semiconductor energy bands and internal electrostatic field generation are applied to explain the photocatalytic mechanism responsible for tetracycline degradation using BiOBr/g-C 3 N 4 /CQDs.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Bei-Lei Yan,Deng Jun,Jun Wang,Tao Yang,Xue-Hua Mao
Based on characteristic multielectron conversion reactions, transition-metal oxides are regarded as potential anode candidates for the new generation of lithium-ion batteries (LIBs) because they are endowed with high specific capacity. Nevertheless, the inferior electronic conductivity and larger volume change lead to fast capacity decay during cycling. Herein, we propose a novel electrophoretic deposition strategy to prepare binder-free Mn 3 O 4 /graphene hybrid electrodes and overcome these two obstacles simultaneously. In the rationally designed structure, Mn 3 O 4 nanoparticles are well encapsulated in the conductive network constructed by interconnected graphene sheets. In the process of cycling, thanks to the excellent flexibility of graphene and the rich voids in this sandwiched structure, not only the structural integrity but also the unobstructed conductive network can be ensured. In addition, it is verified that electrode kinetics is a fast process for surface-controlled lithium storage. From this perspective, in addition to high reversible specific capacity (880 mAh g −1 at 0.1 A g −1 ), the prepared Mn 3 O 4 /graphene hybrid electrode possesses outstanding rate capability (678 mAh g −1 at 5 A g −1 ) and remarkable cycling stability (neglectable capacity decay after 500 cycles at 1 A g −1 ).
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2022
·Vol. 34
·期 1
·015713
·
IF 3.953
Zheyuan Liu,Lingfang Qiu,Ke Wen,Banpeng Cao,Ping Li,Yi Tang,Xiangshu Chen,Hidetoshi Kita,Shuwang Duo
Photocatalysts with heterojunction structure have been widely used for organic degradation. In this study, CuS/g-C3N4 heterojunction was formed by in situ self-assembly via a simply hydrothermal method. A series of characterizations were applied to analyzing the morphology, structure, optical properties and photo-induced electron transfer of the samples. The effect of CuS mass ratio in the CuS/g-C3N4 composite on methyl blue (10 mg l−1) degradation under visible-light illumination was discussed. When CuS mass ratio was 60%, CuS/g-C3N4 behaved the highest photocatalytic efficiency which is 17 times higher than that of pure g-C3N4, and the optimal heterojunction exhibited promising photocatalytic stability as well. The synthesized CuS/g-C3N4 with intimate contact and promising photocatalytic performance provides important implications on analogous researches on g-C3N4-based heterojunctions for photocatalytic applications.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Jun Zhang,Shuai Shao,Desen Zhou,Tingmin Di,Tielin Wang
Two-dimensional (2D) layered nanocomposite provides a surface-to-surface heterojunction, which is an effective way to improve the photocatalytic performance because larger contact areas can promote the separation rate of interfacial charge carriers. In this study, Co(OH)2/g-C3N4/Ni(OH)2 2D layered photocatalysts have been successfully synthesized through a simple precipitation–hydrothermal method. The composite achieves a high H2-production rate of 899 μmol·h–1·g–1, which exceeds the rate of samples only coupled with Co(OH)2 and Ni(OH)2 by 4.0 and 1.9 times, respectively. In addition, the activity is even higher than that of the optimized Pt-g-C3N4 sample (1 wt. % Pt–C). The characterization results reveal the close contact of g-C3N4 and Ni/Co hydroxides, and such a face-to-face contact can greatly improve the interfacial charge-transfer rate, resulting in a high photocatalytic performance. This work demonstrates a simple way to enhance the photocatalytic H2 production of g-C3N4 under the cooperative effect of Co(OH)2 and Ni(OH)2 and provides novel insights into constructing other 2D ternary heterostructure nanocomposites.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Jien Ye,Li Tang,Yiyi Xu,Zhouyun Xie,Ni Zhang,Jingfen Xia,Xuran Liu,Dongbo Wang,Guojing Yang
The escalating pollution of aquatic ecosystems by antibiotics has triggered substantial public concerns, with ciprofloxacin (CIP) being a representative pollutant. Bismuth iodate (BiOIO 3 ), a novel 2D bismuth-based polar photocatalyst, is a promising material for the photodegradation of antibiotics. However, its practical application is hindered by its wide bandgap and rapid charge recombination. Therefore, this study aims to construct a 2D/2D g-C 3 N 4 /BiOIO 3 Z-scheme heterojunction (CNB) via a one-step hydrothermal method to overcome these limitations. The optimal CNB-2 (5 wt% g-C 3 N 4 ) achieved 91% CIP degradation within 60 min (rate constant k=0.04369 min -1 ), 3.8-fold and 2.9-fold higher than pure g-C 3 N 4 and BiOIO 3 , respectively, with a 62% total organic carbon (TOC) removal rate. The degradation pathways primarily involve the ring opening of the piperazine ring and decarboxylation of the quinolone structure. Radical trapping and EPR tests identified that ·OH and ·O 2 - were the main active species. CNB-2 maintained >90% degradation efficiency over pH 3-9 and retained 86.8% activity after 5 cycles, showing excellent stability. Its superior performance arose from the 2D heterostructure’s large specific surface area and Z-scheme charge transfer, which enhanced carrier separation while preserving strong redox capacity. This work offers a practical strategy for designing efficient photocatalysts to remediate antibiotic contaminated water.
✓ 已验证
产品关联
DOI
高影响因子
PHYTOMEDICINE
·
2025
·
IF 8.3
Pengfei Tang,Houli Jiang,Ze Zheng,Zhiqi Xiao,Lingyi Kong,Jun Luo
Background Septic acute kidney injury (S-AKI) is associated with high morbidity and mortality, and dysregulation of oxidative stress and remodeling of the inflammatory microenvironment are emerging as central pathogenic mechanisms. Alleviating inflammation and oxidative stress are the primary effects of limonoids found in nature, and our previously discovered walrobsin A (WA) from Walsura robusta has exhibited significant anti-inflammatory properties. Moreover, bioactive natural products with novel skeletons are ideal molecular probes for identifying potential novel molecular targets for diseases using chemical biology methods. Purpose To explore the therapeutic effect and mechanism of WA for treating S-AKI and to identify previously unrecognized targets in S-AKI. Methods The effect of WA was detected by establishing LPS-induced mouse S-AKI in vivo . Functional and pathological changes in murine kidneys were evaluated by measuring serum creatinine (CRE), cystatin C (Cys C), blood urea nitrogen (BUN), NGAL levels, and HE pathology. A RAW264.7/mTEC coculture system was established to elucidate the target and mechanism of WA by techniques such as RNA-seq, gene interference, DARTS, LC-MS/MS, molecular docking, BLI, and SPR. Results The screening results revealed that WA, a limonoid, significantly alleviated LPS-induced mouse S-AKI, and a RAW264.7/mTEC coculture experiment revealed that WA directly acted on macrophages. Transcriptomic analysis and further research revealed that WA promoted the expression of the antioxidant proteins HMOX1 and SOD2 and inhibited IL-1 β , IL-6, and TNF- α secretion. G protein-coupled receptor 75 (GPR75), which was highly expressed in the renal macrophages of S-AKI mice, was subsequently identified as the direct target of WA. In the RAW264.7/mTEC coculture system, siGPR75 inhibited macrophage oxidative stress and restrained IL-1 β , IL-6, and TNF- α secretion, thereby reducing mTEC injury, and overexpression of GPR75 resulted in the opposite effects. Moreover, siGPR75 reversed the WA-mediated remission of macrophage oxidative stress and the inflammatory microenvironment in vitro , and coadministration of WA failed to increase the therapeutic efficacy of 20-SOLA (a GPR75 inhibitor) in S-AKI in vivo . These results indicate that the WA-GPR75 axis mitigates S-AKI by regulating oxidative stress in macrophages and the inflammatory microenvironment. Conclusion In this study, we elucidated the novel role of GPR75 as a potential target for S-AKI using a bioactive limonoid-type natural product and identified a natural GPR75 inhibitor (WA) as a potential candidate for S-AKI treatment. This study firstly identifies GPR75 in pathological renal conditions and demonstrates its direct role in driving renal injury, thus establishing it as a novel therapeutic target for kidney diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Si Jiang,Jun Xiao,Jieyi Tan,Xiangqi Li
Constructing heterojunctions is an important strategy for enhancing the separation efficiency of charge carriers in graphitic carbon nitride (g-C 3 N 4 ). Meanwhile, immobilization enables the recycle of g-C 3 N 4 -based photocatalysts from wastewater. Herein, a visible light-responsive MoS 2 and SnO 2 co-modified g-C 3 N 4 ternary heterostructure was synthesized via one-pot calcination and subsequently immobilized in a modified bacterial cellulose (BC) aerogel through freeze-drying. The prepared ternary heterojunction exhibited enhanced visible light-harvesting capacity and charge separation efficiency due to intimate interfaces and the synergy effect of different components. It showed a degrade rate constant 3.43 times higher than that of g-C 3 N 4 , and degraded 99.3 % of RhB (30 mg/L) at pH 6.5 after 30 min of irradiation, and 99.1 % at pH 5 after 15 min. Owing to dispersion improved by sodium dodecyl benzene sulfonate (SDBS) and the strength and hydrophobicity enhanced by methoxytrimethylsilane (MTMS), the prepared aerogel degraded 98.7 % of RhB (30 mg/L) at 60 min irradiation, and maintained 94.0 % after 6 cycles. This work demonstrates a highly efficient MoS 2 -SnO 2 -g-C 3 N 4 ternary photocatalyst and a practical immobilization route for application in purification of dye wastewater.
✓ 已验证
产品关联
DOI
高影响因子
ACTA PHYSICO-CHIMICA SINICA
·
2025
·
IF 13.5
Hequn Yang,Fei Rao,Dean Pan,Liu Chen,Numan Abbas,Gangqiang Zhu
Hydrogen peroxide (H 2 O 2 ) is regarded as an ecologically sustainable oxidant with broad applications. Photocatalytic generation of H 2 O 2 from pure water and oxygen offers a green and energy-efficient alternative to conventional processes. Here, single-atom praseodymium (Pr) was anchored onto tubular porous graphitic carbon nitride (Pr-TCN) via a simple impregnation method for visible-light-induced H 2 O 2 production ( λ ≥ 420 nm). The isolated Pr sites accelerate the in-plane charge transfer by establishing a smooth and flexible transfer pathway for photogenerated electrons, and promote *OOH intermediate formation, thereby enhancing water oxidation. The optimized 5% Pr-TCN achieves a H 2 O 2 generation rate of 227.37 μmol g −1 h −1 , 1.8 times higher than unadulterated TCN. This work demonstrates a scalable single-atom engineering strategy for developing efficient photocatalysts for sustainable H 2 O 2 production.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2025
·
IF 5.1
Shuo Yang,Yukun Li,Yingying Fu,Mingjia Dong,Cong Chao,Sen Yao,Qiqian Huang,Shuying Dong
The primary objective of this research was to develop an efficient and stable material capable of both photocatalysis and persulfate (PDS) activation for the degradation of tetracycline (TC). To this end, a composite material, g-C 3 N 4 /Cu x O/GA (CNCuGA), was synthesized via an optimized hydrothermal assembly method. The physicochemical, microstructural, and photoelectric properties were systematically characterized, establishing a CNCuGA/SSL/PDS system to evaluate key parameters (doping rate, catalyst amount, PDS and TC concentrations, initial pH, and co-existing components) on TC degradation under simulated sunlight. Under optimal conditions (15 % doping ratio, 0.2 g·L −1 catalyst, 20 mg·L −1 PDS and 20 mg·L −1 TC), the CNCuGA-3/SSL/PDS system achieved 93.6 % (0.04223 min −1 ) TC removal within 60 min, surpassing the GA/SSL/PDS system (55.4 %, 0.00922 min −1 ) by a factor of 4.58. Mechanistic studies indicated that the enhanced performance originated from accelerated photogenerated electron transfer and prolonged electron lifetime, which promoted reactive species generation, along with the critical role of the Cu(I)/Cu(II) redox cycle in enabling persistent PDS activation. CNCuGA-3 also exhibited excellent recyclability over five cycles, with minimal metal leaching, while the treated solution showed high mineralization efficiency and low biological toxicity. These results collectively demonstrated the promise of CNCuGA-3 as a durable and effective catalyst for solar-driven antibiotic wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子