PHYSICA SCRIPTA
·
2024
·Vol. 99
·期 10
·105572
·
IF 2.6
Gang Wang,Xinmiao Zhang,Xu Jiang,Jiang Li,Hongye Li,Jianqiao Song,Mengjing Jin,Jinyuan Zhou,Erqing Xie,Xiaojun Pan
The noble metal nanoparticles can improve the efficiency of photoelectric conversion via enhancement of light harvesting for the localized surface plasmon resonance (LSPR) effect. Here, TiO2 nanowires were constructed on carbon fiber cloth as a flexible photoanode for photoelectrochemical (PEC) ultraviolet (UV) photodetector. By decorated noble metal Ag nanoparticles on TiO2 nanowires, the photocurrent was improved from 35.9 μA cm−2 to 268.4 μA cm−2, and the rise and decay time were increased by 0.14 s and 0.12 s, respectively. Moreover, the recombination of photon-generated electrons and holes was also decreased in photoanode due to the Schottky barrier between Ag and TiO2. This work provided an approach to promote the performances of the PEC UV photodetector.
✓ 已验证
DOI
高影响因子
NANO
·
2015
·
IF 1.09
XIAOLEI SI,GUANGLIANG CHEN,ZHILI CHEN,JUN HUANG,SHIHUA CHEN,SYLVAIN MASSEY
In this paper, a highly catalytic and nanosized Ag / Co 3 O 4 composite for rhodamine B ( RhB ) degradation was fabricated by using the co-precipitation method at room temperature. The Ag / Co 3 O 4 structure and catalytic properties were characterized through scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) gas-sorption measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-Vis spectroscopy. The results showed that the Co 3 O 4 nanosheets prepared by hydrothermal synthesis mainly exposed (2 2 0) and (1 1 1) facets, which played an important role in determining its catalytic oxidation performance. The Co 3 O 4 nanosheets doped with Ag nanoparticles by a simple silver-mirror reaction exhibited a stable and well-dispersed property in dye solution. Compared to the Ag and Co 3 O 4 nanostructure, the Ag nanoparticles with bigger diameter (10 nm) on Co 3 O 4 surface also readily produced surface-active oxygen species and exhibited a higher catalytic activity for the degradation of RhB solution (5 mg ⋅ L -1 ) under the visible light. The kinetic constant K of Ag / Co 3 O 4 catalyst for RhB degradation reaction was evaluated to 0.02724 min -1 , which is relatively higher than those reported in the literatures.
✓ 已验证
DOI
高影响因子
Materials Research Express
·
2019
·Vol. 7
·期 1
·016506
·
IF 1.449
Syed Adil Shah,Kuo-Juei Hu,Muhammad Naveed,Syed Niaz Ali Shah,Shengyong Hu,Siqi Lu,Fengqi Song
Bimetallic noble metal nanoclusters (NCs) are an emerging topic of metal clusters due to their distinguishing characteristics compared to monometallic clusters. Doping of different noble atoms in other clusters is an effective strategy for tailoring their functionalities for specific applications and synergistic effects. Obtaining single-heteroatom doping is desirable but still very challenging to date. Herein, 2,4-dimethylbenzenthiol (2,4-DMBT) protected Ag/Au alloy NCs (ca. 2-3 nm) were synthesized via a wet chemical one-pot process. The effect of the number of Au atoms in Ag NCs on their optical properties and bandgap was investigated. We found that the change of the absorption peak positions of the Ag NCs was influenced by the presence of Au atoms. Besides, we found that the HOMO-LUMO peak has appeared without a significant change in cluster size during synthesis. Ag/Au alloy NCs are characterized by UV–visible spectroscopy, transmission electron microscopy (TEM) and scanning electron transmission microscopy (STEM).
✓ 已验证
DOI
高影响因子
Frontiers in Chemistry
·
2022
·
IF 5.545
Zhai Haichao,Zhu Chuhong,Wang Xiujuan,Yuan Yupeng,Tang Haibin
Three-dimensional surface-enhanced Raman scattering (SERS) substrates usually provide more hot spots in the excitation light beam and higher sensitivity when compared with the two-dimensional counterpart. Here a simple approach is presented for the fabrication of arrays of Ag-nanoparticles decorated TiO2 nanotubes. Arrays of ZnO nanorods were fabricated in advance by a hydrothermal method. Then TiO2 nanotube arrays were achieved by immersing the arrays of ZnO nanorods in an aqueous solution of (NH4)2TiF6 for 1.5 h. Vertically aligned TiO2 nanotube arrays were modified with dense Ag nanoparticles by Ag mirror reaction. High density of Ag nanoparticles decorated on the fabricated TiO2 nanotubes provide plenty of hotspots for Raman enhancement. In addition, the fabricated array of Ag nanoparticles modified TiO2 nanotubes can serve as a reusable SERS substrate because of the photocatalytic activity of the TiO2 nanotubes. The SERS substrate adsorbed with analyte molecules can realize self-cleaning in deionized water after UV irradiation for 2.5 h. The sensitivity of the fabricated SERS substrate was investigated by the detection of organic dye molecules. The detectable concentration limits of rhodamine 6G (R6G), malachite green (MG) and methylene blue (MB) were found to be 10−12 M, 10−9 M and 10−8 M, respectively. The enhancement factor (EF) of the three-dimensional SERS substrate was estimated to be as high as ∼1.4×108. Therefore, the prepared Ag nanoparticles modified TiO2 nanotube arrays have promising potentials to be applied to rapid and trace SERS detection of organic chemicals.
✓ 已验证
DOI
高影响因子
Nano Research
·
2021
·Vol. 15
·期 1
·317-325
·
IF 8.897
Zuo Zewen,Sun Lianye,Guo Yongbin,Zhang Lujun,Li Junhu,Li Kuanguo,Cui Guanglei
Plasmon coupling is an essential strategy to realize strong local electromagnetic (EM) field which is crucial for high-performance plasmonic devices. In this work, multiple plasmon couplings are demonstrated in three-dimensional (3D) hybrid plasmonic systems composed of polydimethylsiloxane-supported ordered silver nanocone (AgNC) arrays decorated with high-density gold nanoparticles (AuNPs) which are fabricated by a template-assisted physical vapor deposition process. Strong interparticle coupling, particle-film coupling, inter-cone coupling, and particle-cone coupling are revealed by numerical simulations in such composite nanostructures, which produce intense and high-density EM hot spots, boosting highly sensitive and reproducible surface enhanced Raman scattering (SERS) detection with an enhancement factor of ∼ 1.74 × 10 8 . Furthermore, a linear correlation between logarithmic Raman intensity and logarithmic concentration of probe molecules is observed in a large concentration range. These results offer new ideas to develop novel plasmonic devices, and provide alternative strategy to realize flexible and high-performance SERS sensors for trace molecule detection and quantitative analysis.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Yu Han,Xiaohui Fang,Zhoutao Sun,Chen Kang,Lei Zha,Xinping Zhang
Surface-enhanced Raman scattering (SERS) is a rapid and nondestructive spectroscopic method for trace detection. The enhancement based on both electromagnetic and chemical mechanism requires the molecules to be in close contact with the SERS-active material. Therefore, it is difficult to detect trace amounts of molecules in liquid directly. In this paper, graphene oxide (GO) and Ag nanoparticles (AgNPs) are uniformly modified on the inner wall of the capillary. GO can provide chemical enhancement by adsorbing the analyte onto its flat surface and producing efficient charge transfer resonance with the analyte. AgNPs can provide strong localized surface plasmon resonance for electromagnetic enhancement, while capillary can shorten the molecular enrichment time and provide long light–analyte interaction length. The synergism of GO, AgNPs, and capillary makes the optofluidic platform have the ability of ultrasensitive and real-time detection. The detection limit of Rhodamine 6G and thiram is as low as 10–12 and 10–10 M, respectively, and the enhancement factor is as high as 0.9 × 1010 and 108, which indicates that the SERS-active capillaries have great potentials in real-time ultratrace detection of water environment pollutants.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry B
·
2020
·Vol. 8
·期 7
·1371-1382
·
IF 5.344
Yunjian Yu,Lin Mei,Yanmei Shi,Xinge Zhang,Kesong Cheng,Fengyi Cao,Liuxue Zhang,Jia Xu,Xiumin Li,Zhenlong Xu
The increasing prevalence of antibiotic resistance highlights the need for new antibacterial drugs and, in particular, the development of alternative approaches such as photodynamic therapy (PDT) and photothermal therapy (PTT) to manage this growing issue. In the present study, a broad-spectrum antibacterial system was produced in which Ag nanoparticle-conjugated graphene quantum dots (GQD–AgNP) were utilised as a blue light-enhanced nanotherapeutic for efficient ternary-mode antimicrobial therapy. The successful conjugation of AgNPs onto the surface of GQDs can significantly improve the production of reactive oxygen species in light-activatable GQDs and the transformation of light energy to hyperthermia with high efficiency. There was a remarkable increase in the sample temperature of nearly 40 °C via photoexcitation after only 10 min of 450 nm laser exposure (14.2 mW cm−2). The hybrids exhibited much more efficient bactericidal capability against both Gram-negative and Gram-positive bacteria compared with GQDs alone, using 450 nm light irradiation. This is likely a consequence of their enhanced PDT, concomitant PTT, and the synergistic function of AgNPs. The antibacterial mechanism of the new-style nanocomposites was found to irreversibly destroy the bacterial membrane structure, leading to the leaking out of the cytoplasmic contents and the death of the bacteria. At low doses, the biocompatible GQD–AgNP hybrids promoted healing in bacteria-infected rat wounds, with negligible adverse impact to the normal tissue, indicating a promising future for combined photodynamic and photothermal antibacterial applications in clinical medicine.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Xiaoqi Liu,Yanyun Zhang,Yan Liu,Ting'an Zhang
In this paper, a novel grafted zeolite/Fe 3 O 4 /chitosan (ZMC-MAH-TEPA) adsorbent was greenly synthesized and evaluated for the removal of Cr(VI) and Ag(I) in single and bi-component solutions. The characterization data of XRF , XRD, FT-IR, VSM, TGA , BET and SEM showed the successful fabrication of the adsorbent with abundant -NH 2 and -NH- as well as great recovery properties (11.70 emu/g). The effects of experimental parameters, including pH value, initial concentration, temperature, time, and coexisting ions on single and bi-component adsorption, were investigated. The results demonstrated that the adsorption capacities increased with the enhanced shaking time and concentration until equilibrium was reached. The optimum pH value was 3 for Cr(VI) adsorption and 5 for Ag(I) adsorption. The maximum adsorption capacities for Cr(VI) and Ag(I) ions, obtained by the Langmuir model, were 50.75 and 70.12 mg·g −1 in single metal solutions and 45.45 and 58.94 mg·g −1 in bi-component metal solutions (Cr(VI)/Ag(I) = 1:1), respectively. Additionally, the adsorption mechanism of Cr(VI) and Ag(I) was explained in terms of electrostatic interaction and hydrogen bonding between metal ions and -NH 2 and -NH- in ZMC-MAH-TEPA. Taken together, this study provides a clean approach to synthesizing chitosan-based adsorbents for the efficient removal of Cr(VI) and Ag(I) ions.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Xiao-Han Pan,Ling-Xiao Fu,Huan Wang,Yi Xue,Jian-Hua Zu
A novel sulfydryl-functionalized adsorbent PP-g-GMA@MEA for recovery of Ag(I) was synthesized by γ-ray induced simultaneous grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) non-woven fabric, followed by ring-opening processes with mercaptoethylamine (MEA). The obtained adsorbents before and after adsorption of Ag(I) were fully characterized by SEM, EDS, FT-IR spectra, XRD and XPS. Batch adsorption experiments were carried out to evaluate adsorption abilities of the adsorbents under high acidity. The adsorption kinetics of Ag(I) were well fitted with pseudo-second-order kinetics model. The maximum adsorption capacity calculated by the Langmuir isotherm model was 262.51 mg/g at 25 °C. EDS, XRD and XPS analyses confirmed the mechanism of adsorption under high acidity was chelating reaction between -SH and Ag(I) and ion exchange adsorption towards [Ag(NO 3 ) 2 ] −1 . Through competitive adsorption tests, the PP-g-GMA@MEA was found remarkably selective towards Ag(I) when it coexisted with Cu(II), Co(II), Ni(II) and Cr(III) in high acidity medium. Therefore, the developed PP-g-GMA@MEA composite would be a promising adsorbent for Ag(I) recovery from industrial effluents.
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2021
·
IF 7.664
Mingli Han,Zhicheng Shi,Wenqiang Zhang,Kun Zhang,Huanlei Wang,Davoud Dastan,Runhua Fan
High dielectric permittivity materials are widely employed in various electronic devices. To satisfy the ongoing miniaturization of electronic devices, materials with further enhanced dielectric permittivities are strongly desired. In this work, a novel design of epoxy composites based on Ag/Al 2 O 3 /3D-BaTiO 3 foams with hierarchical heterogeneous microstructures are prepared. It is found that, the spatial distribution of the Ag particles can be easily controlled via adjusting the Ag + /Al 3+ mole ratios, yielding highly tailorable dielectric properties. When the Ag + /Al 3+ mole ratios are low, the Ag particles are well isolated by surrounding Al 2 O 3 , yielding the formation of numerous equivalent micro-capacitors and substantially enhanced dielectric permittivity. Moreover, the dielectric permittivities of the composites increase with higher Ag + /Al 3+ mole ratios. Consequently, a high dielectric permittivity of 160 @10 kHz, which is about 35 times that of the epoxy matrix, is achieved in the composite with a Ag + /Al 3+ mole ratio of 1.8. Meanwhile, a low tangent of about 0.062 is maintained. As the Ag + /Al 3+ mole ratio increases, the Ag particles become interconnected, forming Ag networks. Consequently, a plasma-like negative phenomenon which should be attributed to the plasma oscillation of free electrons in the percolative Ag networks, is observed. This work offers an effective route to design polymer composites with tailorable high permittivity and negative permittivity.
✓ 已验证
DOI
高影响因子
NANO
·
2021
·
IF 1.556
M. M. Xia,J. Li,Y. Y. Zhang,D. N. Kang,Y. L. Zhang
Nanosized TiO 2 has been actively developed as a low-cost and environment-friendly anode material for lithium-ion batteries (LIBs), but its poor electronic conductivity seriously restricts its practical applications. This drawback is addressed in this work by the fabrication of one-dimensional mesoporous graphene@Ag@TiO 2 composite nanofibers as anode materials for high-performance LIBs. The materials were prepared via electrospinning combined with annealing treatment, and the effects of graphene addition on the microstructure and electrochemical performance of the resulting mesoporous graphene@Ag@TiO 2 nanofibers were investigated in detail. Ag@TiO 2 nanofibers with the optimal amount of graphene displayed a maximum initial discharge capacity of 4 9 0 . 5 mAh ⋅ g − 1 at 1 0 0 mA ⋅ g − 1 and retained a discharge capacity of 2 0 9 . 1 mAh ⋅ g − 1 at 1 0 0 mA ⋅ g − 1 after 100 cycles. These results reflect the excellent cycling stability of the material. The average specific discharge capacity of the nanofibers ( 9 7 . 6 mAh ⋅ g − 1 at 1 0 0 0 mA ⋅ g − 1 ) was two-fold higher than that of samples without graphene, and their discharge capacity returned to 2 5 3 . 8 mA ⋅ g − 1 (approximately 9 6 . 2 mA ⋅ g − 1 for other nanofibers) when the current density was recovered to the initial value ( 4 0 mA ⋅ g − 1 ) . Electrochemical impedance spectroscopic measurements confirmed that the conductivity of the electrode was 6 . 3 × 1 0 − 1 S ⋅ cm − 1 , which is higher than that of bare mesoporous Ag@TiO 2 ( 1 . 9 9 × 1 0 − 5 S ⋅ cm − 1 ). Thus, one-dimensional mesoporous graphene@Ag@TiO 2 nanofibers can be regarded as a promising anode material for LIBs.
✓ 已验证
DOI
高影响因子
CRYSTENGCOMM
·
2022
·Vol. 24
·期 36
·6392-6399
·
IF 3.756
Yuhan Kong,Gongguo Zhang,Chunyu Wang,Yanyun Ma,Yiqun Zheng
Noble metal Janus nanocrystals involving components with the same crystal structure and close lattice constants are technically difficult to produce as anisotropic growth is not favored under general deposition conditions. Herein, taking Au and Ag, we describe a feasible synthetic strategy to create Au–Ag Janus nanoparticles (JNPs) with tunable sizes, which exhibit multiple plasmonic absorptions in the UV-vis range. The success of the current synthesis lies in the surface doping of trisoctahedral (TOH) Au seeds with limited amount of Pt/Ag atoms to introduce a relatively large lattice strain during the seeded growth, which is found crucial to facilitate the anisotropic deposition of Ag. In contrast, the use of undoped Au seeds leads to the formation of Au@Ag core–shell nanoparticles. The size of resulting products could be tuned by varying the amount of the added Ag precursor or the size/quantity of Au seeds. Compared to core–shell counterparts, the current Au–Ag Janus nanoparticles exhibit more plasmonic absorption peaks. Owing to such advantages, the current Au–Ag Janus nanoparticles show enhanced catalytic properties in the reduction of 4-nitrophenol under UV-vis light irradiation. The current study provides a feasible strategy that allows the fabrication of Janus bimetallic nanocrystals with elements having a close lattice constant and validates the promising use as plasmonic catalysts, which could be potentially extended to other metals or alloys.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）