SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Pengyao Guo,Yuan Qin,Yujie Fang,Lei Ding
This study presents the rational design of a magnetically recoverable CoFe 2 O 4 /BiVO 4 @g-C 3 N 4 (CFO/BVO@CN) ternary heterojunction for highly efficient levofloxacin (LVFX) degradation via peroxymonosulfate (PMS) activation under visible light. The key innovation lies in the synergistic integration of a unique charge transfer pathway with interfacial M-N (M = Co, Fe, Bi, V) chemical bonding, as unequivocally evidenced by XPS. This atomic-level interfacial engineering creates efficient electron channels that not only promote the spatial separation of photogenerated carriers but also dramatically accelerate the dual redox cycles of metal species (Co 2+ /Co 3+ , Fe 2+ /Fe 3+ ).Crucially, the V 4+ /V 5+ pair functions as an efficient electron shuttle, facilitating the rapid regeneration of PMS-active Co 2+ and Fe 2+ sites and sustaining a high-efficiency catalytic process. Consequently, the optimized system achieves an exceptional LVFX removal rate of 98.8% within 30 min, driven predominantly by singlet oxygen ( 1 O₂) and superoxide radicals ( • O 2 − ). The catalyst demonstrates robust stability over multiple cycles, facile magnetic separation, and effective detoxification of LVFX. This work provides a novel paradigm for developing multifunctional photocatalytic systems by marrying heterojunction engineering with atomic-level interface modulation for sustainable water purification.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Yan Zhuang,Shuang Meng,Xue Yang,Dongxuan Guo,Dantong Zhang,Tai Peng,Yue Li,Jinlong Li
The formation of amorphous-crystalline heterojunctions has been recognized as an exceptionally effective strategy for enhancing the separation and transfer of photogenerated charge carriers, thereby improving photocatalytic efficiency. In this study, amorphous-crystalline MoS 2 /g-C 3 N 4 /Co 3 O 4 ternary heterojunctions with a unique flower-like structure were synthesized via the integration of g-C 3 N 4 nanosheets and amorphous MoS 2 onto Co 3 O 4 microspheres with a floral structure using a simple solvothermal method followed by acid treatment. Density functional theory (DFT) calculations revealed that the unique floral morphology, combined with the formation of amorphous-crystalline heterojunctions, facilitates the efficient transfer of photogenerated carriers while simultaneously suppressing the recombination of electron-hole pairs. The optimized MoS 2 /g-C 3 N 4 /Co 3 O 4 (3 %) heterojunction exhibited remarkable photocatalytic performance, achieving 82.1 % degradation of Rhodamine B (5 mg L −1 ) under visible-light irradiation within 90 min. Furthermore, the photocatalyst exhibited excellent stability and reusability, as confirmed through cycling experiments, and efficiently decomposed Rhodamine B and its intermediates into small, non-toxic molecules. This work highlights the successful development of a highly active, recyclable amorphous-crystalline ternary heterojunction with a flower-like structure, providing a novel and efficient strategy for the visible-light-driven removal of organic pollutants.
✓ 已验证
产品关联
DOI
高影响因子
Journal of the American Chemical Society
·
2017
·
IF 13.858
Shuai Xu,Peng Zhou,Zehui Zhang,Changjun Yang,Bingguang Zhang,Kejian Deng,Steven Bottle,Huaiyong Zhu
Selective oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is one of the key reactions for producing chemical commodities from biomass and their derivatives. The challenge for this reaction is to develop an efficient catalytic process that can be conducted under mild conditions (room temperature and atmospheric pressure, using oxygen molecules in air as the oxidant) and a recyclable catalyst. Herein we report a photocatalyst of cobalt thioporphyrazine (CoPz) dispersed on g-C3N4 (abbreviated as CoPz/g-C3N4), which exhibits excellent catalytic activity toward the selective oxidation of HMF into FDCA under simulated sunlight using oxygen molecules in air as a benign oxidant. For example, an FDCA yield of 96.1% in an aqueous solution at pH = 9.18 is achieved at ambient temperature and air pressure. At lower pH (4.01), the product generated is 2,5-diformylfuran. Hence, it is possible to control the reaction outcome by control of the pH of the reaction system. g-C3N4 itself is not a suitable catalyst for the selective oxidation because under the experimental conditions g-C3N4 generates hydroxyl radicals that initiate processes that oxidize HMF directly to CO2 and H2O. CoPz on the other hand activates O2 to give singlet oxygen (1O2), which more controllably oxidizes HMF to FDCA albeit at a more moderate yield (36.2%). The strong interaction between the CoPz and g-C3N4 in the CoPz/g-C3N4 catalyst is experimentally evidenced, which not only improves accessibility of the CoPz sites and makes the catalyst recyclable but also disables the hydroxyl radical generation by g-C3N4 and promotes 1O2 generation on the CoPz sites, significantly enhancing the catalytic performance. This study demonstrates the potential for efficient non-noble metal photocatalysts for organic transformations driven by sunlight.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2017
·
IF 3.387
Liping Zhang,Guohong Wang,Zhenzhong Xiong,Hua Tang,Chuanjia Jiang
A combined hydrothermal-calcination approach is developed to synthesize hierarchical β -Bi 2 O 3 /g-C 3 N 4 direct Z-scheme photocatalyst with enhanced visible light photoactivity for Rhodamine B (RhB) degradation. First, Bi 2 O 2 CO 3 microflowers were hydrothermally prepared using Bi(NO 3 ) 3 ·5H 2 O as feedstocks, and then a series of β -Bi 2 O 3 /g-C 3 N 4 direct Z-scheme photocatalysts were synthesized via a facile calcination method using Bi 2 O 2 CO 3 and g-C 3 N 4 as precursors. The samples were systematically characterized by various characterization technologies including X-ray diffraction, scanning and transmission electron microscopes, Fourier transform infrared spectroscopy and N 2 absorption-desorption equipment. It was found that the g-C 3 N 4 content in the precursors played a key role in affecting the photocatalytic activity of the final products. The β -Bi 2 O 3 /g-C 3 N 4 heterojunction exhibited higher photocatalytic activity than single active components ( β -Bi 2 O 3 and g-C 3 N 4 ), indicating the presence of a synergistic effect between two active components in β -Bi 2 O 3 /g-C 3 N 4 heterojunction. Among all as-prepared catalysts, the 70 wt.% g-C 3 N 4 /Bi 2 O 2 CO 3 exhibits the highest activity for RhB degradation, and the apparent reaction rate constant k (42.2 × 10 −3 min −1 ) is 3.1 and 1.7 times as high as that of pure β -Bi 2 O 3 (13.5 × 10 −3 min −1 ) and g-C 3 N 4 (25.2 × 10 −3 min −1 ), respectively. The enhanced photocatalytic performance of β -Bi 2 O 3 /g-C 3 N 4 heterostructure photocatalysts is mainly due to the high surface area, closely contacted interfaces between the β -Bi 2 O 3 and g-C 3 N 4 component, and the formation of direct Z-scheme structure in the β -Bi 2 O 3 /g-C 3 N 4 composites.
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2021
·
IF 3.08
Jianhe Tang,Yu Liu,Yitong Lin,Xueke Liu,Liang Chen,Congcong Piao,Dawei Fang,Jun Wang
Photocatalysis technology is an effective way for converting nitrate (NO 3 − ) and sulfite (SO 3 2− ) in wastewater to pollution-free nitrogen (N 2 ) and exploitable ammonium sulfate ((NH 4 ) 2 SO 4 ). In this study, three novel photocatalysts , Z-scheme (Cu,Cu)/g–C 3 N 4 –(Cu,Cu)-WO 3 (002), Z-scheme (Cu,Ag)/g–C 3 N 4 –(Cu,Ag)-WO 3 (002) and Z-scheme (Cu,Ru)/g–C 3 N 4 –(Cu,Ru)-WO 3 (002), were prepared by photo-assisted electrostatic self-assembly method. The prepared photocatalysts are synthetically characterized by XRD , SEM, TEM, EDX , XPS , DRS, PL , TPR and EIS . The effects of different co-catalyst combinations on the activity and selectivity of the photocatalysts are evaluated. Also, the impacts of simulated solar light irradiation time, NO 3 − initial concentration and cycle times on the conversions of NO 3 − and SO 3 2− are studied. The results display that the Z-scheme (Cu,Ag)/g–C 3 N 4 –(Cu,Ag)-WO 3 (002) photocatalyst can selectively convert NO 3 − to N 2 , while the Z-scheme (Cu,Ru)/g–C 3 N 4 –(Cu,Ru)-WO 3 (002) photocatalyst can selectively convert NO 3 − to NH 4 + . Nevertheless, the Z-scheme (Cu,Cu)/g–C 3 N 4 –(Cu,Cu)-WO 3 (002) photocatalyst has hardly selectivity for conversion of NO 3 − . These three photocatalysts all exhibit relatively strong capabilities for converting SO 3 2− to sulfate (SO 4 2− ) due to the existence of the highly active (002) plane of WO 3 . Finally, the possible mechanisms on the photocatalytic conversions of NO 3 − and SO 3 2− caused by Z-scheme (Cu,M)/g–C 3 N 4 –(Cu,M)-WO 3 (002) (M = Cu, Ag and Ru) photocatalysts are proposed.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2018
·
IF 3.057
Minquan Sun,Shuling Shen,Zhujun Wu,Zhihong Tang,Jiaping Shen,Junhe Yang
A novel rice spike-like g-C 3 N 4 /TiO 2 nanowire heterojunctions are fabricated by hydrothermal treating Na 2 Ti 3 O 7 ultralong nanotubes in the presence of g-C 3 N 4 . The presence of g-C 3 N 4 promotes the hydrolysis of Na 2 Ti 3 O 7 ultralong nanotubes. The partially replaced O of TiO 2 by N from g-C 3 N 4 leads to the formation of a tight-binding interface between one dimensional TiO 2 and two dimensional g-C 3 N 4 , which is crucial for fast and effective transfer of photogenerated electrons in heterostructured photocatalysts . As a result, the g-C 3 N 4 /TiO 2 nanowire heterojunctions exhibit excellent visible-light photocatalytic activity. The kinetic constant (k) of g-C 3 N 4 /TiO 2 (0.024 min −1 ) for degradation of methylene blue under visible light irradiation is 1.85 and 4 times than that of pure g-C 3 N 4 and P25, respectively.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Yi Xiao,Xueqin Tao,Ganhua Qiu,Zhifeng Dai,Peng Gao,Benxia Li
Constructing Z-scheme photocatalysts is an effective approach to enhance the conversion efficiency of solar to chemical energy. Herein, W 18 O 49 /g-C 3 N 4 heterostructures have been synthesized by growing W 18 O 49 ultrathin nanowires on g-C 3 N 4 nanosheets via a convenient solvothermal process. Various characterizations were performed on the materials to understand the structure-performance relationship. The photocatalytic properties of the W 18 O 49 /g-C 3 N 4 heterostructures were evaluated by the two oxidation reactions, phenol degradation and oxidative N C coupling of benzylamines , under a simulated sunlight (360 ≤ λ ≤ 780 nm). With tuning the W 18 O 49 /g-C 3 N 4 mass ratio, the optimal photocatalyst of W 18 O 49 (30)/g-C 3 N 4 containing 30 wt% W 18 O 49 nanowires exhibited the highest activity in both the photocatalytic reactions. The generations and contributions of the active species in the photocatalytic reactions were identified by electron spin resonance (ESR) spectra and active-species-eliminating experiments. Accordingly, the photocatalytic mechanism of W 18 O 49 /g-C 3 N 4 heterostructures has been expounded based on the direct Z-scheme electron transfer between the two semiconductors as well as the synergistic actions of active sites on W 18 O 49 nanowires and g-C 3 N 4 nanosheets . This work demonstrates a rational paradigm to construct 1D/2D semiconductor heterostructures and provides further insights into Z-scheme photocatalytic mechanism for boosting solar-driven pollutant degradation and organic transformation.
✓ 已验证
DOI
高影响因子
ENERGY
·
2020
·
IF 6.082
Ming Su,Haiping Hu,Jianchang Gan,Wenhua Ye,Wenhua Zhang,Huihu Wang
Real-time hydrogen production at low temperature can effectively solve the problem of hydrogen storage and transportation in cold area and plateau region . In this study, a novel Al alloy/NaCl/g-C 3 N 4 composite with enhanced low temperature reactivity for hydrogen production has been synthesized by mechanical ball milling method. The feasibility of Al-water reaction at the temperature of 253.15–373.15 K was firstly proved by thermodynamic calculation . The hydrogen generation performance was studied in tap water at 298.15 K and 23 wt% NaCl aqueous solution at low temperature of 253.15–273.15 K. The results indicated that the addition of g-C 3 N 4 can effectively promoted the hydrolysis of activated Al composites. Hydrogen yield of Al alloy/NaCl/g-C 3 N 4 composite with 1 g of g-C 3 N 4 addition reached 1006 mL·gAl −1 and the induction time of reaction was 90 s at 253.15 K, while that of Al alloy was only 230 mL·gAl −1 and 1120s respectively. It was supposed that the addition of g-C 3 N 4 effectively reduced the size of NaCl particles and promoted their uniform distribution in Al matrix and more cracks were generated. The kinetics and reaction mechanism using Al alloy/NaCl/g-C 3 N 4 composite were discussed. This study provides a new idea for the synthesis of Al composites with high reactivity at low temperature.
✓ 已验证
DOI
高影响因子
Nano Energy
·
2018
·
IF 13.12
Yi Lu,Xiu Cheng,Ge Tian,Heng Zhao,Li He,Jie Hu,Si-Ming Wu,Ying Dong,Gang-Gang Chang,Silvia Lenaerts,Stéphane Siffert,Gustaaf Van Tendeloo,Zhao-Fei Li,Ling-Ling Xu,Xiao-Yu Yang,Bao-Lian Su
Hierarchical semiconductors are the most important photocatalysts , especially for visible light-induced hydrogen production from water splitting. We demonstrate herein a hierarchical electrostatic assembly approach to hierarchical CdS/m-TiO 2 /G ternary photocatalyst, which exhibits high photoactivity and excellent photostability (more than twice the activity of pure CdS while 82% of initial photoactivity remained after 15 recycles during 80 h irradiation). The ternary nanojunction effect of the photocatalyst has been investigated from orbitals hybrid, bonding energy to atom-stress distortion and nano-interface fusion. And a coherent separation mechanism of charge carriers in the ternary system has been proposed at an atomic/nanoscale. This work offers a promising way to inhibit the photocorrosion of CdS and, more importantly, provide new insights for the design of ternary nanostructured photocatalysts with an ideal heterojunction .
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2020
·
IF 5.778
Ahmad Beyhaqi,Qingyi Zeng,Sheng Chang,Mingqi Wang,Seyed Mohammad Taghi Azimi,Chun Hu
Graphitic carbon nitride (g-C 3 N 4 ) has enormous potentials for photocatalysis , yet it only possesses moderate activity because of excitonic effects and sluggish charge transfer. Here, we develop a novel two-dimensional g-C 3 N 4 /WO 3 /MoS 2 (CWM) ternary nanocomposite through a facile co-calcination and a hydrothermal process to reach a highly-efficient photocatalyst for organic pollutant elimination under visible light. The WO 3 and MoS 2 nanoparticles were dispersed on the ultra-thin g-C 3 N 4 nanosheets, in which the electronegative g-C 3 N 4 facilitates formation of oxygen vacancies in WO 3 . Compared to pure g-C 3 N 4 , WO 3 , and binary composites, CWM exhibited higher photocatalytic activities for various organic pollutants removal under visible light irradiation. For instance, the CWM showed a removal ratio of ∼99% for RhB after only 10 min irradiation of visible light (λ > 420 nm) and nearly 100% for ciprofloxacin after 2 h of operation. The results showed that OH radicals are the main active species for organic degradation , which suggests a direct Z-scheme heterojunction in CWM that improved spatial separation of charge carries. Furthermore, the collection of electrons is significantly enhanced by MoS 2 for oxygen reduction reaction, and the increased oxygen vacancies of WO 3 further enhanced the separation of electron-hole pairs; therefore, it led to an effective suppression of charge carriers recombination. The above synergistic effects of ternary photocatalyst result in higher photocatalytic oxidation performance for wastewater treatment compared with pure WO 3 , g-C 3 N 4 and their binary composites.
✓ 已验证
DOI
高影响因子
JOURNAL OF ASIA-PACIFIC ENTOMOLOGY
·
2014
·
IF 0.875
Xin Chao Liu,Xiao Nan Lu,Qi Zhi Liu,Zhi Long Liu
Water-distilled essential oil from the dried bulbs of Allium chinense (Liliaceae) was analyzed by gas chromatography–mass spectrometry (GC–MS). Eighteen compounds, accounting for 98.4% of the total oil, were identified and the main components of the essential oil of A. chinense were methyl allyl trisulfide (30.7%), dimethyl trisulfide (24.1%), methyl propyl disulfide (12.8%) and dimethyl disulfide (9.6%) followed by methyl allyl disulfide (3.4%) and methyl propyl trisulfide (3.6%). The essential oil exhibited contact toxicity against the booklice ( Liposcelis bostrychophila ) with an LC 50 value of 441.8 μg/cm 2 while the two major constituents, dimethyl trisulfide and methyl propyl disulfide had LC 50 values of 153.0 μg/cm 2 and 738.0 μg/cm 2 against the booklice, respectively. The essential oil of A. chinense possessed strong fumigant toxicity against the booklice with an LC 50 value of 186.5 μg/l while methyl allyl trisulfide (LC 50 = 90.4 μg/l) and dimethyl trisulfide (LC 50 = 114.2 μg/l) exhibited stronger fumigant toxicity than methyl propyl disulfide (LC 50 = 243.4 μg/l) and dimethyl disulfide (LC 50 = 340.8 μg/l) against the booklice. The results indicated that the essential oil and its major constituents have potential for development into natural insecticides or fumigants for control of insects in stored grains.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Ye Zhang,Yiguo Xu,Jia Guo,Xiuwen Zhang,Xinling Liu,Yushuang Fu,Feng Zhang,Chunyang Ma,Zhe Shi,Rui Cao,Han Zhang
Mixed-dimensional van der Waals heterojunctions have attracted a great deal of attention due to their excellent photoelectric conversion capability, which have been widely applied for self-powered photoelectrochemical (PEC)-type devices as the growing demands of clean energy, environmental governance and protection, and the underwater communications. In this work, 0D Bismuth quantum dots (Bi QDs) encapsulated 2D g-C 3 N 4 nanosheets (g-C 3 N 4 @Bi) mixed-dimensional heterojunctions were prepared and spined on ITO-coated polyethylene terephthalate (PET) substrate for working as self-powered PEC-type photodetector (PD). Density functional theory calculations evidenced the successful construction of a type II van der Waals heterojunction between g-C 3 N 4 and Bi as well as its enhanced optoelectronic characteristics. Benefiting from the superior properties of g-C 3 N 4 @Bi, the as-prepared PD exhibits a high photocurrent of 5.02 μA cm −2 , a responsivity of 2843.14 μA W −1 , and a specific detectivity of 2.25 × 10 11 Jones at 0 V. Furthermore, the PD exhibits self-powered capability after 1000 cycles of bending, and the stable and repeatable ON/OFF signals can be detected over 90 days, indicating the excellent long-term stability and the potential of g-C 3 N 4 @Bi-based PD in practical applications.
✓ 已验证
DOI
高影响因子