文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2617至2628个,产品总数3,612个

切换升序
MOF
APPLIED CATALYSIS A-GENERAL · 2025 · IF 4.8

In-situ loading of ZnIn2S4 onto Ni-MOF-74 to construct type Ⅱ heterojunction for improving photocatalytic hydrogen production

Kunpeng Song,Haojie Lin,Qing Guo,Fang Liao,Chunmei Zeng

ZnIn 2 S 4 is a semiconductor photocatalyst with a suitable band gap for renewable energy production. However, its efficiency in photocatalytic hydrogen evolution is limited by the rapid recombination of photogenerated charge carriers. In this study, a ZnIn 2 S 4 @Ni-MOF-74 heterojunction nanocomposite was designed and synthesized via an in-situ hydrothermal growth method. This unique structure promotes intimate interfacial contact between the two materials and ensures a well-aligned band structure. The optimized ZnIn 2 S 4 @Ni-MOF-74 composite achieves a photocatalytic hydrogen evolution rate of 1823.7 μmol·g −1 ·h −1 without the use of precious metal cocatalysts, significantly surpassing that of pristine ZnIn 2 S 4 . Cycling tests demonstrated that the photocatalyst maintains stable performance over 12 consecutive cycles without significant degradation. The enhanced photocatalytic activity can be attributed to the well-matched band alignment and intimate interfacial contact, which collectively facilitate the formation of a type-II heterojunction structure, thereby promoting efficient charge separation and migration.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

pH-resilient magnetic biochar-MOF hybrids for sustainable norfloxacin removal: Synergistic confinement and coordination mechanisms in real aquatic matrices

Xiaohui Xu,Leyao Shi,Qun Liu,Jiexiong Zhong,Min Lu,Liu Yang,Xiaohui Guan

The pervasive contamination of aquatic ecosystems by fluoroquinolone antibiotics, notably norfloxacin (NOR), necessitates innovative remediation strategies. Magnetic corn straw biochar (MCS) is widely used as an adsorbent to remove contaminants due to its high adsorption performance. However, due to its narrow pH range, its application is limited. To solve this problem, the study develops a novel composite adsorbent, MCS-HA@MOF-303. MCS is synthesized via potassium ferrate impregnation and pyrolysis (700 °C). It is then functionalized with ammonia-assisted humic acid (HA) to anchor MOF-303 crystals. This forms a hierarchical “microporous-mesoporous” structure. A maximum NOR adsorption capacity of 485.47 mg/g is achieved under the conditions of 308 K and pH =6 after 4 h of contact time, with a corresponding removal efficiency of 93.41 %. Notably, the composite exhibits pH-resilient performance, maintaining high adsorption efficiency (>60 %) across a broad pH range from 4 to 8, which is paramount for practical applications in real aquatic environments with fluctuating pH conditions. The adsorption mechanism is primarily based on Al 3+ coordination bonding, π-π stacking, and micro-pore confinement (with a pore size of 2.01 nm matching the 0.82 nm diameter of NOR). Superior NOR affinity over competing antibiotics is achieved due to carboxyl coordination and pore compatibility. DFT calculations further confirm the synergistic adsorption mechanism, revealing that the ultramicroporous confinement effect significantly enhances adsorption energy, and direct coordination with Al 3+ sites is energetically favorable. Efficient desorption is accomplished with 0.1 mol/L HCl (92.61 % recovery), retaining 70 % of its initial adsorption capacity after four consecutive cycles. Fixed-bed column studies further demonstrate its practical efficacy. Under different hydraulic retention times (HRTs), the Thomas model reveals a maximum dynamic adsorption capacity ( Q t ) of up to 4.05 mg/g and high correlation coefficients (R 2  > 0.97), confirming its suitability for predicting breakthrough behavior and supporting scalability for real wastewater treatment. This work advances sustainable antibiotic adsorption through the resource-efficient utilization of agricultural waste.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

Post-synthetic acid treatment of aqueous synthesized bimetallic Ce/Zr MOF-801 enables efficient oxidative desulfurization of model fuels

Liang Chu,Zhaokun Wang,Zhaohui Liu,Teng Zhao,Liyan Wang,Mu Yang,Ge Wang

Host-guest catalysts are promising for tailored applications but require innovative synthesis strategies. Herein, we report the first ambient aqueous-phase synthesis of bimetallic Ce/Zr MOF-801, followed by acid post-treatment. Utilizing defect engineering, Ce species are preferentially exposed within the robust Zr-MOF-801 substrate. This structural modification substantially enhances the host–guest catalyst’s oxidative desulfurization (ODS) performance. We systematically investigate synthesis parameters, spatiotemporal yield, and defect characterization, and refines catalytic conditions. Post-acid-treated Ce/Zr-MOF-801-H displays augmented external surface area (189 m 2 g −1 ), and exposed acidic sites while upholding the outstanding intrinsic stability of the Zr-MOF-801 substrate. Under optimal conditions (60 °C, 6 min), Ce/Zr-MOF-801-H completely eliminates dibenzothiophene (1000 ppm S), with a turnover frequency of 39.3 h −1 and catalytic activity of 53.2 mmol g −1 h −1 , far surpassing Zr-UiO-66-H. It maintains a desulfurization rate of 96.6% after five cycles. FTIR spectroscopy, quenching experiments, and ESR spectroscopy reveal that the exposed Ce sites serve dual roles: (1) activating the substrate by reducing the electron density of sulfur atoms and (2) facilitating H 2 O 2 into hydroxyl and superoxide radicals, driving ODS. This strategy not only advances industrial ODS applications but also sheds light on the synthesis of MOF-based host–guest catalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY COMMUNICATIONS · 2025 · IF 5.4

Photoresponsive CoNi-MOF@CoO2@WSe2 hybrid: A dual-function platform for high-performance photo-hybrid supercapacitors and zearalenone sensing

Sohail Mumtaz,Muhammad Imran,Amir Muhammad Afzal

In this study, we develop photoresponsive heterogeneous Cobalt-nickel-based MOFs (CoNi-MOFs), cobalt dioxide (CoO 2 ), and tungsten diselenide (WSe 2 ) hybrid device to improve the performance of photo-assisted supercapacitors. We measure the electrochemical characteristics of photo-assisted hybrid electrodes under both dark and light conditions using cyclic voltammetry and galvanostatic charge–discharge. In dark, a high specific capacity (Qs) is estimated at 970 C/g, increased to 1230 C/g under the light in three-electrode assemblies. An FTO/CoNi-MOF@CoO 2 @WSe 2 /Electrolytes//PANI@AC/GS photo hybrid supercapacitors device is designed and measured in both conditions. The hybrid device showed Qs of 325 C/g in light conditions with energy and power densities of 72 Wh/kg and 827 W/kg, respectively. Even after undergoing 6000 cycles, it exhibited a capacity retention (CR) rate of 91 % and columbic efficiency of 93 %, indicating its exceptional durability as an energy storage device. Besides, the composite devices detect zearalenone in agricultural food samples. The optimal signal for Zearalenone in phosphate buffer solution was observed at pH 7.0, yielding the highest detected response. The sensor demonstrated a broad linear dynamic range of 1–300 μM and an impressively low detection limit of 0.5 nM for Zearalenone concentration. The CoNi-MOF@CoO 2 @WSe 2 nanocomposite has a remarkable sensitivity value of 110.72 mA/cm −2 /mM −1 and response against zearalenone in light. The findings also suggest that the capacitance of the CoNi-MOF@CoO 2 @WSe 2 electrode may increase at an optimal temperature. This likely occurs due to enhanced ion diffusion and charge transfer kinetics, which can improve the energy storage device’s efficiency and aid in identifying the cancerous part of the body.

CAS / MDL: 787-70-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2025 · IF 5.6

Microstructure engineering of Co-MOF derived MoS2CoS2/CoSO4 composite: Synergistic effects and ionic distribution optimization for efficient hydrogen evolution

Yingxuan Cao,Zhuoao Li,Pengbo Ding,Lixiu Guan,Zixiang Bai,Chenghao Yuan,Junguang Tao

The development of cost-effective and high-performance electrocatalysts for the hydrogen evolution reaction (HER) is crucial for sustainable energy systems. Herein, we report a novel Co-MOF-derived MoS 2 CoS 2 /CoSO 4 composite on carbon cloth, synthesized through a controlled hydrothermal and thermal activation process. This catalyst achieves a low overpotential of 36 mV at 10 mA cm −2 and a Tafel slope of 36 mV dec −1 in 1 M KOH, rivaling commercial Pt/C. By managing the preparation temperature, we preserved the MOF structure’s integrity, maintaining a high specific surface area. Sulfurization at 450 °C enhanced electron transfer and prevented nanoparticle aggregation. The catalyst demonstrates remarkable stability over 175 h, attributed to the Co-Mo bimetallic synergy and in-situ composite formation, which optimize hydrogen adsorption and electron transfer. Importantly, we explored how sulfur source modulation affects active site formation and activity. Lower sulfur levels hinder CoS 2 formation, resulting in sparse sites and inferior performance, while optimal sulfur ensures dense composite growth. This study emphasizes the importance of local ionic dynamics in shaping catalyst microstructure and provides a universal method for designing non-precious metal electrocatalysts through ionic distribution engineering.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2025 · IF 8.2

Self-Standing MOF-Derived Co@SiCnw Nanocomposite Aerogel with a Hierarchical Microstructure for Highly Effective and Wideband Electromagnetic Attenuation

Yi Hou,Jixiang Wang,Baijun Chen,Hui Zhang,Zichen Xiang,Haikui Zhu,Lixi Wang

To meet the requirements of lightweight and wideband attenuation for advanced electromagnetic (EM) absorption materials, the combination of both MOF composition and hierarchical structural design was applied as the strategy to prepare the MOF-derived Co@SiC nanowire (Co@SiCnw) nanocomposite aerogel. The hierarchical and laminated structures with multiple Co@SiCnw layers were constructed via a mixed growth-assisted freeze-drying and calcination process. The ultralightweight Co@SiCnw presents a low density of 0.11 g/cm3. With abundant second-phase polarization interfaces and enlarged EM wave attenuation channels to enhance dielectric and conductive loss, the optimized Co@SiCnw offers a minimal reflection loss (RLmin) of −61.4 dB at 10.0 GHz (2.64 mm) and an effective absorption bandwidth (EAB) as wide as 7.44 GHz with a sample thickness of only 2.16 mm. Furthermore, multifunctionalities, including low density, thermal insulation, and self-standing, were demonstrated for Co@SiCnw, making it a high-performance and practical microwave absorption material.

CAS / MDL: 13530-50-2 9002-89-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2025 · IF 5.1

Functionalized β-cyclodextrin MOF with carbon nanotube conductive veins for highly sensitive and wide-concentration-range bisphenol A sensing

Siru Guo,Huiting Han,Xinru Gao,Yilin Zhai,Juan Wang,Zhaona Zhang,Xuetong Liu,Ruoyu Yuan,Lina Yang,Xinxing Wang

Bisphenol A (BPA), as an endocrine disruptive compound of public concern, is widely present in natural water and wastewater. The development of BPA detection technology is of great significance. However, the insoluble organic nature of BPA hinders its adsorption and electron transfer at hydrophilic sensing interfaces, limiting the improvement of electrochemical sensing performance. Based on the high affinity and selectivity of β -cyclodextrin ( β -CD) toward BPA, a composite material (CNT@CD-MOF) of β -cyclodextrin metal–organic framework (CD-MOF) embedded with carbon nanotubes (CNTs) was prepared in this article for electrochemical sensing of BPA. Compared with β -CD, the three-dimensional ordered structure of CD-MOF promoted the adsorption and enrichment of BPA. The doping of CNTs led to the growth of smaller sized CD-MOF, improved the material’s charge transfer ability, and enhanced its stability. Under the synergistic effect of CNTs and CD-MOF, the CNT@CD-MOF modified glassy carbon electrode exhibited a catalytic effect on BPA oxidation and significantly improved response signals, achieving detection of BPA in a fairly wide linear range of 1 nM ∼ 500 μM with a low detection limit of 0.5 nM. This study successfully applied functionalized CD-MOF for the electrochemical detection of BPA for the first time, greatly improving the electrochemical sensing performance of BPA and promoting the application of electrochemical sensing technology in BPA detection. In addition, the excellent properties of CNT@CD-MOF make it of great application value in the fields of BPA adsorption and removal.

CAS / MDL: 108-95-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2025 · IF 8.5

UiO-66(Zr) MOF enhances pH sensitivity of carboxymethyl fiber colorimetric films incorporated with anthocyanins for monitoring fish freshness

Weibo Lu,Huangwei Ye,Yike Zhu,Yuhan Li,Huan Li,Qing Shen,Jian Chen

The non-destructive, real-time, and visual assessment of fish freshness is crucial for maintaining food quality and safeguarding public health. In this study, a pH-sensitive and colorimetric enhancement film was developed using a carboxymethyl cellulose/anthocyanin/metal-organic framework (CMC-BA-UIO). The concentration of UIO-66 in the film-forming solution significantly influences the mechanical properties and ammonia responsiveness of the indicator film, with the CMC-BA/2.5%UIO-66 variant exhibiting optimal performance. When utilized for real-time fish freshness monitoring at 4 °C, the CMC-BA/2.5%UIO-66 indicator film demonstrated a distinct color transition from purple to yellow, which exhibited a strong correlation with the rot index (TVB-N) of the fish. These findings indicate that the developed indicator film has potential applications in intelligent packaging for monitoring food shelf life, providing a visual alert to producers and consumers regarding food spoilage.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY · 2025 · IF 6.2

Fe,Zr-MOF Nanozyme-Enhanced Dual-Recognition System: Integrating Molecularly Imprinted Polymers and Aptamers for Colorimetric Detection of Chlorpyrifos

Chunqi Yu,Yingqi Wang,Ke Wang,Shuai Zhang,Xiaopeng Hu,Yiwei Liu,Jiajia Xi

Chlorpyrifos (CPF) poses severe environmental and health risks, driving the need for on-site monitoring tools. This study presents a novel dual-recognition colorimetric sensor for ultrasensitive detection of CPF by coimmobilizing molecularly imprinted polymers (MIPs) and aptamers onto bimetallic Fe,Zr-MOF composites. The resulting Fe,Zr-MOF/Apt/MIP hybrid synergistically merges the structural robustness of MIPs with the conformational specificity of aptamers, while also functioning as both a nanocarrier and a peroxidase mimic. Notably, CPF binding sterically hinders substrate diffusion to catalytic sites, enabling quantitative detection via dose-dependent inhibition of TMB oxidation. The optimized sensor exhibits exceptional performance: a broad linear range (1–120 ng mL–1), ultralow detection limit (0.105 ng mL–1), and high specificity against interferents. When validated with complex matrices (apples, pears, and cabbage), it achieved satisfactory recoveries (91.0–110.0%). This work establishes a field-deployable strategy for on-site pesticide monitoring in food and environmental safety.

CAS / MDL: 108-67-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Small · 2025 · IF 12.1

Rapid and Scalable Channel-End-Sealing Assembly of Flexible 20-nm Co-Continuous MOF Membranes for Ultrafast Gas Separation

Qian Liu,Xinxi Huang,Yihao Xiao,Yongyan Feng,Wanbin Li

Metal-organic framework (MOF) membranes with sub-nanometer pore systems hold great potential for efficient gas separations. However, the rational designing and scalable manufacturing of MOF membranes face critical challenges, including stringent synthesis conditions, prolonged processing times, excessive reagent consumption, limited scalability, poor reproducibility, uncontrollable thickness, and mechanical fragility. In this study, we report a bioinspired channel-end-sealing assembly strategy for facile, rapid, and scalable production of flexible, ultrathin (≈20 nm), large-area (>1000 cm 2 ) co-continuous MOF membranes. Inspired by capping the unit cells of honeycombs, we present sealing the channel ends of polymer substrates to form defect-free membranes, through establishing controllable and self-terminating crystallization at the nanoconfined interfaces between biphasic precursor systems via stoichiometric modulation. This strategy enables reproducible manufacturing of MOF membranes within 5 min at room temperature with low precursor consumption of 1.0 mL cm −2 . Moreover, the resulting MOF membranes exhibit ultrafast and stable sieving properties with H 2 permeance as high as 13900 gas permeation units and H 2 /CO 2 selectivity up to 40.6 at 150 °C, outperforming state-of-the-art membranes. Crucially, the membranes can maintain their performance after bending with a curvature of 200 m −1 . These findings pave the way for industrial-scale production and application of MOF membranes.

CAS / MDL: 288-32-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2023 · IF 9.5

High permeability PEG/MXene@MOF membrane with stable interlayer spacing and efficient fouling resistance for continuous oily wastewater purification

Bin Xiang,Jingling Gong,Yuqing Sun,Wenhao Yan,Ruirui Jin,Jian Li

Unstable interlayer spacing of lamellar membranes would be rapidly compressed and narrowed under normal high flowrates and concentration polarization effect contributes to reduced permeation and fouling resistance. Herein, a large permeability PEG/MXene@MOF membrane with stable interlayer spacing and superior antifouling property was created via facile interface self-assembly strategy. Metal-organic framework ( MOF , UiO-66-NH 2 ) nanoparticles as supports constructed an intercalation-induced structure with hierarchical Ti 3 C 2 T x (MXene) nanosheets , which effectively regulated the interlayer spacing and improved permeability. Hydrophilic polyethylene glycol (PEG) further enhanced the stability of intercalation structure via hydrogen bonding , so that the PEG/MXene@MOF membrane demonstrated excellent swelling resistance with an average layer spacing expansion of only 0.05 nm even after immersion in water for 8 days. Moreover, MOF particles increased the lamellar roughness and interlayer water retention capacity, resulting in the PEG/MXene@MOF membrane with remarkable separation selectivity and powerful fouling resistance (UWOCA >156°, UWOSA <5.5°). Regarding the purification of oil-in-water emulsions stabilized by surfactants , the PEG/MXene@MOF membrane exhibited extremely stable high permeability (1246 ± 12 L m −2  h −1 bar −1 ) and excellent efficiency (>99.7 %), even during continuous separation of high-viscosity crude oil emulsions for 60 min. In addition, the PEG/MXene@MOF membrane also exhibited superior chemical durability and mechanical robustness in strong-corrosiveness and high-salty environments (72 h), ultrasonic treatments (120 min), bending experiments (100 times) and abrasion tests (20 times). Therefore, this work provided a promising strategy to construct highly permeable membrane with stable interlayer spacing and efficient fouling resistance for practical oily wastewater purification.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
NANOTECHNOLOGY · 2020 ·Vol. 31 ·期 39 ·395710 · IF 3.551

Design of MOF-derived hierarchical Co@C@RGO composite with controllable heterogeneous interfaces as a high-efficiency microwave absorbent

Yan Wang,Xiaochuang Di,Xiang Gao,Xinming Wu

Carbon-based composites have triggered tremendous attention in the development of high-efficiency microwave absorbers, due to their compatibility, light weight, and high microwave absorption. However, fabricating carbon-based absorbers with a strong absorption ability in a broad frequency range is challenging. Hence, a facile strategy was used to produce Co@C derived from a zeolitic imidazolate framework (ZIF)@ graphene. The Co@C@RGO composite was obtained by annealing the ZIF67/GO nanocomposite precursor at 650 °C in a nitrogen atmosphere. Due to the magnetic loss induced by the Co particles, the dielectric loss generated by the carbon skeletons and graphene, and the interfacial polarization between the components, the hierarchical composite exhibits superior electromagnetic (EM) wave absorption properties. The optimal reflection loss (RL) of the Co@C@ RGO composite can be up to −67.5 dB at 2.6 mm, and the effective bandwidth (≥−10 dB) is 5.4 GHz (10–15.4 GHz) with a thickness of 2 mm at 20 wt% loading. The dipolar polarization caused by graphene, as well as enhanced impedance matching, synergistic effect and interfacial effect among the components, increase the microwave absorption performance of the composite. This work may open a new path to use the Co@C@RGO composite with its high-efficiency EM wave properties as an absorber.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。