文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2629至2640个,产品总数3,200个

切换升序
G
CHEMICAL ENGINEERING JOURNAL · 2020 · IF 10.652

One-step construction of S-scheme heterojunctions of N-doped MoS2 and S-doped g-C3N4 for enhanced photocatalytic hydrogen evolution

Yanli Chen,Fengyun Su,Haiquan Xie,Ruiping Wang,Chenghua Ding,Jindi Huang,Yixue Xu,Liqun Ye

Step-scheme (S-scheme) heterojunctions of S-doped g-C 3 N 4 (SCN) and N-doped MoS 2 (NMS) were constructed by a one-step thermal polycondensation method in Ar atmosphere using thiourea and ammonium tetrathiomolybdate as starting materials. X-ray photoelectron spectra revealed the formation of new N-Mo and C-S-Mo bonds between SCN and NMS and enhanced NMS purity. The as-prepared NMS/SCN with an NMS ratio of 19.3 wt% showed the highest photocatalytic activity. Within 4 h of illumination, its H 2 generation rate reached 658.5 μmol/g/h, which was about 23 and 38 times higher than that of pure SCN (28.8 μmol/g/h) and NMS (17.4 μmol/g/h), respectively. UV–vis diffuse reflectance spectra (DRS), surface photovoltage spectrum (SPV), photoluminescence (PL) spectra and electrochemical tests revealed the extended visible light absorption and enhanced photo-generated carrier separation of the formed S-scheme heterojunction. The mechanism and driving force of charge transfer and separation in S-scheme heterojunction photocatalysts are investigated and discussed.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2017 · IF 3.359

Preparation of SA-g-(PAA-co-PDMC) polyampholytic superabsorbent polymer and its application to the anionic dye adsorption removal from effluents

Ying Zhao,Yu Chen,Jian Zhao,Zongrui Tong,Shaohua Jin

A pH-responsive polyampholytic superabsorbent polymer (SAP), sodium alginate-g-(polyacrylic acid-co-polymethacryloxyethyltrimethyl ammonium chloride) (SA-g-(PAA-co-PDMC)), was prepared by the free-radical-induced graft copolymerization . The structure of the SAP was characterized by FTIR, XRD and SEM. The synthesis conditions were optimized to achieve an SAP with the highest swelling ratio. The anionic dye adsorption properties of the achieved SAP were characterized using Food Yellow 3 (FY3) as a model dye. The effects of DMC amount and pH of the dye solution on the adsorption capacities were determined. The adsorption kinetics, isotherm, thermodynamics, desorption and reusability of the SAP were studied respectively. The maximum adsorption capacity and removal efficiency of SA-g-(PAA-co-PDMC) SAP reached up to 654.87   mg/g and 98.23%, respectively, which are among the highest values of solid adsorbents in FY3 adsorption. Compared with the traditional polyanion SAPs, the SAP prepared in the present work can be expended to the simultaneous removal of both cationic and anionic dyes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2021 · IF 6.707

Surface construction of a novel metal-free g-C3N4-based heterojunction photocatalyst for the efficient removal of bio-toxic antibiotic residues

Yangqing He,Bei Ma,Qian Yang,Yu Tong,Zhanying Ma,Lucas Binnah Junior,Binghua Yao

The exploration of metal-free g-C 3 N 4 -based photocatalysts is recognized as one of the most effective approaches for remedying environmental pollution and ameliorating energy crisis. However, the simultaneous realization of a highly efficient, long-term stability and broad visible-light responsive photocatalysts remains a major desirable challenging goal in the area of photocatalysis. Herein, using N,N′-bis(p-carboxyl-phenylene) perylene-3,4:9,10-perylene bisimide (BCPP-PBI) as the efficient surface photovoltaic agent, a novel BCPP-PBI/g-C 3 N 4 heterojunction is successfully constructed via an one-step acylation reaction for the first time. The optimized 1%BCPP-PBI/g-C 3 N 4 composite exhibited significantly improved visible-light absorption capability for light with wavelength shorter than 658 nm and demonstrated remarkably enhanced photocatalytic performance in tetracycline degradation with high stability. Benefitting from the surface modification effect by incorporating BCPP-PBI onto g-C 3 N 4 , there is a significantly improved visible light harvesting capability, as well as, a highly efficient photoexcited charges carrier separation and transfer system in 1%BCPP-PBI/g-C 3 N 4 . The strong covalent chemical bond formed between BCPP-PBI and g-C 3 N 4 enabled the BCPP-PBI molecules to serve as important electron sink which adopts electrons from g-C 3 N 4 . This study paves the way for the design of highly effective g-C 3 N 4 -based metal-free organic catalysts towards their practical utilization in the elimination of recalcitrant antibiotic pollutants from various real wastewaters.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2021 · IF 4.527

Boosting exciton dissociation and charge transfer in P-doped 2D porous g-C3N4 for enhanced H2 production and molecular oxygen activation

Yao Zhang,Jingshu Yuan,Liang Zhao,Boyu Wu,Bolin Zhang,Pianpian Zhang,Shengen Zhang,Chaofang Dong

Graphite carbon nitride (g-C 3 N 4 ) is regarded as a potential candidate to settle environmental and energy issues, but its activity remains unsatisfactory due to the huge exciton effect and delayed charge transfer. Herein, the effects of phosphorus-doping and two-dimensional (2D) porous structures on the transition among singlet excitons, triplet excitons, and carriers and consequently the regulation mechanism of reactive oxygen species have been intensively studied. The calculations of the density functional theory and experimental results confirmed that P-doping could induce a dual built-in electric field to provide a driving force (up to 0.3 eV) for exciton dissociation. The light response capability, exciton dissociation, and carrier migration efficiency were significantly enhanced by the synergistic effect of the dual electric field and 2D porous structure. The optimal sample exhibited excellent H 2 evolution rate and tetracycline degradation rate under visible-light irradiation which were approximately 25 and 7.1 times higher than those of bulk g-C 3 N 4 , respectively. The improved photocatalytic activity can also be demonstrated by a 2.9-fold and 3.2-fold increase in ·O 2 – and H 2 O 2 production, respectively. This work provides a new perspective and approach to improve the performance of polymer photocatalysts and the targeted regulation of active species using exciton engineering.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2020 · IF 4.65

3D-2D-3D BiOI/porous g-C3N4/graphene hydrogel composite photocatalyst with synergy of adsorption-photocatalysis in static and flow systems

Jiaying Li,Xiang Yu,Yi Zhu,Xionghui Fu,Yuanming Zhang

A novel 3D-2D-3D BiOI/porous g-C 3 N 4 /graphene hydrogel (BPG) composite photocatalyst was synthesized via a two-step hydrothermal method and shows a synergy of adsorption and photocatalysis . In comparison with bulk g-C 3 N 4 , 2D porous g-C 3 N 4 (pCN) exhibited not only shortened diffusion distance for photogenerated carrier transport but also large contact area for rapid interfacial charge separation. Nevertheless, the photocatalytic performance was far from satisfactory due to the poor light harvesting. Incorporating 3D flower-like BiOI with 2D pCN to form a heterojunction was found to be an efficiency way for improving light harvesting, while charge separation efficiency was also enhanced. 3D graphene hydrogel, in which the effective photocatalyst 3D-2D BiOI/pCN heterojunction was homogenously distributed, not only revealed excellent adsorption capability and bulk electron transfer but also provided simplicity of separation and recovery. Consequently, in static system, the degradation efficiency of methylene blue (MB) and the typical antibiotic levofloxacin hydrochloride (LVF) was 7.2 and 2.7 times as high as that for BiOI. In flow system, the pollutants could be constantly degraded without separation with the removal rates about 1.54 and 1.67 times higher than those of BiOI, which kept unchanged for 30 h. The construction of 3D-2D-3D BPG composite combined the excellent adsorption capacity of GH with the photocatalytic activity of BiOI/pCN heterojunction, resulting in a high removal efficiency towards pollutants. This work provided deep insight into design and fabrication of 3D hydrogel composites with excellent synergy of adsorption and photocatalytic properties.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ENVIRONMENTAL MANAGEMENT · 2024 · IF 8

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Jiahui Zhao,Dahai Zeng,Qiwei Wang,Zhidan Lin,Florian Vogel,Wei Li,Peng Zhang

Ultrafiltration technology, separating water from impurities by the core membrane, is an effective strategy for treating wastewater to meet the ever-growing requirement of clean and drinking water . However, the similar nature of hydrophobic organic pollutants and the membrane surface leads to severe adsorption and aggregation, resulting unavoidable membrane degradation of penetration and rejection. The present study presents a novel block amphiphilic polymer, polyethersulfone-g-carboxymethyl chitosan@MWCNT (PES-g-CMC@MWCNT), which is synthesized by grafting hydrophobic polyethersulfone to hydrophilic carboxymethyl chitosan in order to suspend CMC in organic solution. A mixture of hydrophilic carboxymethyl chitosan and hydrophobic polymers (polyethersulfone), in which hydrophilic segments are bonded to hydrophobic segments, could provide hydrophilic groups, as well as gather and remain stable on membrane surfaces by their hydrophobic interaction for improved compatibility and durability. The resultant ultrafiltration membranes exhibit high water flux (198.10 L m −2 ·h −1 ), suitable hydrophilicity (64.77°), enhanced antifouling property (82.96%), while still maintains excellent rejection of bovine serum albumin (91.75%). There has also been an improvement in membrane cross-sectional morphology, resulting in more regular pores size (47.64 nm) and higher porosity (84.60%). These results indicate that amphiphilic polymer may be able to significantly promote antifouling and permeability of ultrafiltration membranes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2024 ·Vol. 191 ·期 11 ·1-11 · IF 5.3

A molecularly imprinted electrochemiluminescence sensor based on mimic enzyme ZIF-90 and MnO2/g-C3N4 magnetic particles for detection of methidathion

Huang Ziyu,Yang Guangwei,Deng Qiuling,Zhang Xuhui,Wei Xiaoping,Li Jianping

Methidathion (MTDT), a common organophosphorus pesticide with high insecticidal activity, is widely used for pest control. However, the misuse of MTDT leads to widespread residues and endangers human health. Therefore, it is crucial to develop a simple and highly sensitive method for the detection of MTDT residues. Herein, ZIF-90/MnO 2 /g-C 3 N 4 /Fe 3 O 4 composite particles were synthesized: The  MnO 2 nanosheets could absorb the energy of the excited g-C 3 N 4 to quench the ECL of g-C 3 N 4 while ZIF-90 acted as a mimetic enzyme to catalyze the formation of thiocholine from MTDT. The thiocholine caused the reduction of MnO 2 to Mn 2+ , restoring the ECL signal of g-C 3 N 4 . Combined with molecular imprinting technique, an electrochemiluminescence sensor was constructed for the determination of MTDT. The determination range was 1.00 × 10 –9  ~ 7.00 × 10 –7  g/L, and the detection limit was 6.58 × 10 –10  g/L. Structurally similar organophosphorus pesticides showed no cross-reactivity. The method has high sensitivity and specificity, and has been successfully applied to the determination of MTDT residue in fruits with recoveries in the range 93.75% ~ 102.37%. Graphical abstract

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2024 · IF 6.3

Construction of a novel Mott-Schottky heterostructure gas sensor g-C3N4/SnO2 with layered nanorods array for high-sensitivity acetone detection

Yanping Zhao,Xuxia Shai,Qihang Zhou,Kaiyuan Shen

Developing exhaled acetone sensors with high performance can be effectively applied to the medical diagnosis and the health monitoring. Herein, a two-dimensional (2D) layered graphitic carbon nitride (g-C 3 N 4 ) with tunable electronic structure, abundant edge sites, and high stability is proposed, and it is further coupled with stannic oxide (SnO 2 ) by one-step hydrothermal approach to construct a Mott-Schottky heterostructure with layered nanorods array. The exceptional response of the as-fabricated g-C 3 N 4 /SnO 2 gas sensor to 50 ppm acetone at 100 °C is four times higher than that of the pristine SnO 2 sensor. Additionally, the g-C 3 N 4 /SnO 2 sensor's remarkable selectivity, long-term stability against acetone gas, and detection limit of 250 ppb are exhibited. The unique hierarchical design and the Mott-Schottky heterostructure creation which validated by electrochemical study, may be in charge of the enhanced acetone sensing capabilities of g-C 3 N 4 /SnO 2 gas sensor. This work will provide a concise and effective avenue to construct hierarchical composite with Mott-Schottky heterostructure for high-performance acetone gas sensor.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Autophagy · 2018 · IF 11.1

GRSF1-mediated MIR-G-1 promotes malignant behavior and nuclear autophagy by directly upregulating TMED5 and LMNB1 in cervical cancer cells

Zhen Yang,Qi Sun,Junfei Guo,Shixing Wang,Ge Song,Weiying Liu,Min Liu,Hua Tang

Emerging evidence has revealed that miRNAs could upregulate the expression levels of target genes. However, the molecular mechanism underlying upregulation of targets mediated by miRNAs remains unclear. In this study, we found a novel miRNA named MIR-G-1 by GRSF1-RNA immunoprecipitation (RIP)-deep sequencing, which could directly target and upregulate LMNB1 and TMED5 in a GRSF1-dependent manner in cervical cancer cells. In addition, upregulated MIR-G-1 in cervical cancer promoted a malignant phenotype in vitro and in vivo. TMED5 could interact with WNT7B and thus activated the canonical WNT-CTNNB1/β-catenin signaling pathway. MIR-G-1 mediated the activation of this pathway. Furthermore, MIR-G-1 promoted serum starvation-induced nuclear macroautophagy/autophagy, and accelerated taxol (TAX)-induced DNA-damage repair in cervical cancer cells. Collectively, these findings may provide a new insight into the upregulation mechanism and nuclear autophagy mediated by miRNAs and provide a potential biomarker for cervical cancer.Abbreviations: 3ʹUTR: 3′ untranslated region; EMSA: electrophoretic mobility shift assay; EMT: epithelial-mesenchymal transition; GRSF1: G-rich RNA sequence binding factor 1; IF: immunofluorescence; IP: immunoprecipitation; IHC: immunohistochemistry; lnc: long noncoding; miRNA:microRNA; TAX: taxol; TMED5: transmembrane p24 trafficking protein 5

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2025 · IF 5.1

Ultrasensitive electrochemical/visual colorimetric dual-mode biosensing of Pb2+ based on G-quadruplex DNAzyme and 2D bimetallic porphyrin MOF derived nanocomposites

Chuang Yang,Fuyan Chen,Yajie Zhao,Wushuang Bai

Rapid and accurate detection of lead (II) ions (Pb 2+ ) is of great importance for food and environmental safety. In this work, we developed a dual-mode biosensing strategy for Pb 2+ determination based on a bimetallic two-dimensional porphyrinic MOF nanocomposite and G-quadruplex DNAzyme, combined with enzyme-like synergistic catalysis and DNA hybridization chain reaction (HCR) amplification. The sensing platform provides both electrochemical and visual colorimetric readouts, enabling highly sensitive detection under different application scenarios. Benefiting from the coupling of HCR with the cooperative catalysis of the G-quadruplex DNAzyme and MOF nanocomposite, the assay shows markedly enhanced sensitivity. In the electrochemical mode, the sensor achieves a limit of detection of 0.4 nM with a linear range from 1 to 10,000 nM. In the colorimetric mode, the assay affords a detection limit of 2.6 nM with a linear range from 10 to 10,000 nM. This dual-mode Pb 2+ biosensing strategy shows promising potential for food safety monitoring and environmental pollution analysis, and provides a useful reference for the development of new techniques for trace heavy-metal ion detection.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PeerJ · 2022 · IF 3.061

Solubilization, purification, and ligand binding characterization of G protein-coupled receptor SMO in native membrane bilayer using styrene maleic acid copolymer

Lina Zhu,Hongxin Zhao,Yizhuo Wang,Chuandi Yu,Juanjuan Liu,Ling Li,Zehua Li,Jin Zhang,Han Dai,Junfeng Wang,Lei Zhu

Smoothened (SMO) protein is a member of the G protein-coupled receptor (GPCR) family that is involved in the Hedgehog (Hh) signaling pathway. It is a putative target for treating various cancers, including medulloblastoma and basal cell carcinoma (BCC). Characterizing membrane proteins such as SMO in their native state is highly beneficial for the development of effective pharmaceutical drugs, as their structures and functions are retained to the highest extent in this state. Therefore, although SMO protein is conventionally solubilized in detergent micelles, incorporating the protein in a lipid-based membrane mimic is still required. In this study, we used styrene maleic acid (SMA) copolymer that directly extracted membrane protein and surrounding lipids as well as formed the so-called polymer nanodiscs, to solubilize and purify the SMO transmembrane domain encapsulated by SMA-nanodiscs. The obtained SMA-nanodiscs showed high homogeneity and maintained the physiological activity of SMO protein, thereby enabling the measurement of the dissociation constant (K d ) for SMO ligands SMO-ligands Shh Signaling Antagonist V (SANT-1) and Smoothened Agonist (SAG) using ligand-based solution nuclear magnetic resonance spectroscopy. This work paves the way for investigating the structure, function, and drug development of SMO proteins in a native-like lipid environment.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2025 · IF 3.9

Piezoelectric photocatalytic PVDF-g-IL nanocomposite membranes incorporated with ZnO@PDA-Ag nanoparticles for high-efficiency dye wastewater separation and purification

Liu Hongxu,Xie Junhao,Sun Shulin

In recent years, piezoelectric–photocatalytic materials have attracted significant attention due to their potential to address environmental pollution issues in a straightforward, effective and sustainable manner. In this paper, Ag nanoparticles are successfully immobilized on the surface of ZnO, and a multifunctional PVDF-based water treatment membrane with piezoelectric–photocatalytic performance is constructed for the first time by combining the prepared ZnO@PDA-Ag composite nano-photocatalysts with the PVDF-g-IL piezoelectric matrix. The distinctive structure of ZnO@PDA-Ag enhances charge separation in the photocatalytic process, effectively promoting the photocatalytic activity of ZnO. The grafting IL onto PVDF chain segments induces a transformation of the polar crystalline phases within the PVDF. The synergistic effect of both results in significant improvements to the membrane’s porosity, increasing the permeate flux. The PVDF-g-IL/ZnO@PDA-Ag membrane demonstrates a high degree of efficiency in the removal of various dyes with an approximate removal efficiency of 100%. Furthermore, the PVDF-g-IL/ZnO@PDA-Ag membrane displays piezoelectric polarization, resulting in the formation of a built-in electric field when exposed to ultrasound, which enhances electron–hole separation and transfer efficiency. The membrane is capable of degrading approximately 98% of the dye within a 90-min degradation experiment. Finally, the PVDF-g-IL/ZnO@PDA-Ag membrane exhibits excellent mechanical stability even after multiple self-cleaning and recycling cycles.

CAS / MDL: 1314-13-2 62-31-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。