Small
·
2026
·
IF 11.8
Xin Li,Huanhuan Zhao,Xinqiang Hu,Hao Wei,Menghuan Li,Yanhua Hou,Kaiyong Cai,Yan Hu
Titanium (Ti) implants are widely used for treating bone fractures, but their clinical success is often limited by high failure rates due to the excessive osteoclastogenic activation of osteoclast precursor cells (OPCs) at the implantation site, particularly in patients with osteoporosis. Notably, the excessive osteoclastic differentiation of OPCs potently disrupts the osteogenesis-angiogenesis coupling to promote osteoclast-mediated osteolysis while dismantling the pro-osteogenic type H vascular niches, resulting in elevated risk of implant destabilization. To address this issue, here we report a biomineralization-tuned extracellular matrix (ECM)-mimetic biomineralized coating (TCC@Har-CaG) to enable redox rewiring of OPCs for promoting new bone formation. Specifically, we employed collagen-I as the substrate material to fabricate the stimuli-responsive biomineralized coating for the cooperative delivery of antioxidative gallic acid (GA) and osteoclast precursor cell inhibitor Harmine. The TCC@Har-CaG coating could sustainably release GA after implantation to effectively relieve reactive oxygen species (ROS) stress at the osteoporotic bone defects, which could synergize with Harmine to efficiently induce OPC quiescence and restore osteogenesis-angiogenesis coupling, thus cooperatively promoting new bone generation. This study presents a potential tactic for addressing osteoporotic bone fractures in clinical settings.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Fubing Xiao,Ying Ding,Cong Ning,Yu Peng,Wenyi Li,Zijian Xiao,Heng Wu,Shuangxi Chen
Brachial plexus root avulsion (BPRA) results in extensive motor neurons (MNs) loss, muscle atrophy, and irreversible motor dysfunction. Current surgical strategies with reimplantation fail to promote the motor recovery often leading to poor clinical outcomes, because of the too slow re-growth of the axons of MNs to re-innervate the target muscles before atrophy happens. To reconstruct the neuroprotective microenvironment to reduce the MNs death following BPRA, we developed an injectable dual-network HGα composite hydrogel encapsulating a 6′-sialyllactose (6′-SL) mimetic peptide. The HGα hydrogel was formed via Zn 2+ -induced self-assembly of glycyrrhizic acid (GA) to establish a primary physical network, combined with photocrosslinking of methacryloyl hyaluronic acid (HAMA) and 6′-SL mimetic peptide to form a secondary covalent network. In vitro studies demonstrated that HGα exhibits favorable injectability and tissue adhesiveness. HGα showed potent antioxidant capacity. In a rat BPRA model, at week 8, 50% of rats in the HGα-treated group achieved a Terzis Grooming Test score of 5, HGα hydrogel significantly improved in forelimb motor function, modulated the local inflammatory microenvironment to preserve the spinal MNs, promoted remyelination of musculocutaneous nerve, attenuated muscle atrophy, offering a promising strategy to restore motor function.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BMEMat
·
2026
·
IF 17.2
Siyu Pan,Xuanyi Lu,Wenjie Yang,Yunhui Peng,Lingfu Deng,Shuai Zha,Xueyang Fang,Guochen Bao,Lijun Jiang
Intratumoral L-lactate represents a valuable biomarker for both prognosis and therapy response, underscoring the importance of its accurate detection. However, traditional L-lactate assays rely on indirect hydrogen peroxide readouts and often compromise the accuracy and specificity. Herein, we report an aptamer-based nanoprobe (UCNP-Apt-Act) that allows direct L-lactate detection. Aptamers offer high specificity for L-lactate but suffer from poor cellular uptake and premature activation by extracellular L-lactate. To overcome this, we introduced lanthanide-doped upconversion nanoparticles (UCNPs) to enable spatially controlled unlocking by near-infrared (NIR) light for intratumoral L-lactate detection. The nanoprobe remains “locked” during delivery via an engineered actuator, preventing premature response to extracellular L-lactate. Upon 980 nm excitation, UCNPs convert NIR to UV emission, photocleaving the actuator linker and unlocking the aptamer. Notably, the UCNP carriers enhanced cellular uptake by 41 times through overcoming membrane barriers. The unlocked nanoprobe shows a 46-fold fluorescence enhancement in the presence of L-lactate, with an exceptional selectivity against a broad range of molecules and biological ions and metabolites. It enables specific detection of L-lactate in cancer cells, colorectal tumors, and diverse real samples, with excellent recoveries of 95.0%–110.0%. This strategy establishes a robust approach for endogenous small-molecule sensing and provides a versatile platform for biomedical applications.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2026
·Vol. 42
·期 29
·20999-21017
·
IF 4.4
Zhang Zefeng,Xu Yang,Huang Wenchao,Zhang Yuliang,Chang Xueting,Jin Lei,Chen Xiaobo,Zhang Xinyue,Li Fuxing
Icing
critically compromises the safety and operational stability
of marine equipment and shipboard devices in winter or polar regions,
while marine biofouling accelerates material corrosion. Therefore,
coating technologies are urgently required to synergistically integrate
efficient anti/deicing with robust antibacterial and anticorrosion
properties. Herein, we develop a fluorine-free multifunctional coating
based on hydrophobically modified SiO 2 @Ag/few-layer graphene
powders. It is fabricated via a multistep process involving encapsulation
of silver nanoparticles within a silica shell, compounding with few-layer
graphene, surface modification with hexadecyltrimethoxysilane, and
incorporation into an epoxy resin matrix. It exhibits a water contact
angle of 152 ° ± 2 ° and a sliding angle of 1.5 °
± 1 ° . Under 1 Sun illumination, its surface temperature
reaches a maximum of 83.1 ° C and remains stable over ten on/off
cycles, and electrothermal heating at 20 V raises its surface temperature
to 107 ° C. It delays frost formation by a factor of 3.6 relative
to the bare substrate and maintains a consistently low ice adhesion
strength of ∼13 kPa even after multiple freeze–thaw
cycles. Upon synergistic photoelectrothermal effect, defrosting is
completed within 60 s, and a 1 cm-thick ice layer is melted in 487
s. It displays bactericidal rates of 99.41% against Vibrio natriegens and 98.59% against Bacillus subtilis , and demonstrates favorable biocompatibility
in marine environments. Furthermore, it retains its hydrophobicity
after mechanical abrasion, chemical exposure, UV aging, and corrosion
resistance testing. From a practical perspective, this coating can
be applied to diverse substrates and entails a reasonable fabrication
cost. Therefore, this study demonstrates an efficient solution to
integrating robust anti/deicing and antibacterial functions for protecting
equipment in harsh environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Photonics
·
2026
·Vol. 13
·期 15
·4374-4386
·
IF 6
Zhou Yuqi,Zhai Yalin,He Tao,Wan Peng,Kan Caixia,Shi Da Ning,Kong Fanqiang,Han Long,Jiang Mingming
The monolithic integration of solar-blind ultraviolet
polarization
sensitivity and high-energy X-ray detection into a single semiconductor
platform is urgently demanded for next-generation multimodal smart
sensing, yet remains unattainable with mainstream ultrawide bandgap
materials (e.g., Ga 2 O 3 , hBN, diamond, and others)
due to their inherent trade-offs among bandgap, stopping power, and
anisotropy. Here, we break this deadlock by developing lead-free layered
CsAgCl 2 perovskite single crystals via a well-controlled
chemical solution deposition method. This material features an ultrawide
indirect bandgap of 4.29 eV, a Cs/Ag heavy-atom constituent,
and pronounced optical anisotropy. The developed Ag/CsAgCl 2 /Ag device architecture delivers a comparable polarization-sensitive
solar-blind ultraviolet photodetector with a dichroic ratio of 4.6,
responsivity of 560 mA/W, specific detectivity of 2.3 ×
10 13 Jones, and fast response (300/270 μs)
at 250 nm, outperforming all reported leadfree perovskite deepultraviolet
detectors. Concurrently, leveraging a large mobility–lifetime
product (μτ ∼ 2.8 × 10 –4 cm 2 V –1 ) and ultralow dark current
drift (1.25 × 10 –4 μA cm –1 s –1 V –1 ), the same device showcases
ultrahigh sensitivity of 10563 μC·Gy –1 ·cm –2 , incredibly low detection limits of
28.7 nGy air ·s –1 , and high-resolution
imaging at 50 V for 50 keV X-ray photons, rivaling commercial
directconversion materials. Boasting outstanding ambient stability
and ultralow dark current, this CsAgCl 2 platform uniquely
unifies two incompatible functions, delivering an eco-friendly, transformative
paradigm for compact multimodal sensing with profound scientific and
practical implications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2026
·Vol. 130
·期 31
·10958-10966
·
IF 3.4
Li Wen-Tao,Zhang Cong-Cong,Deng Zheng-Dang,Feng Jing-Ru,Huang Fan,Ren Lin-Hao,Ding Si-Jing,Liu Xiao-Li,Ma Liang
Semiconductor-metal
heterostructured nanomaterials, featuring efficient
electron-transfer pathways, excellent light-harvesting capability,
and effective separation of photogenerated charge carriers, have emerged
as highly promising candidates for photocatalytic hydrogen production.
In this study, a thin Ag transitional layer was first deposited onto
the surface of Au NBPs, followed by growth to construct heterostructures
featuring pairwise interfacial contact among Au, Pt, and CdS. Morphological
and compositional characterizations reveal that Pt is located at the
tips of the Au NBPs and CdS grows at the midsection, resulting in
a unique heterostructure characterized by remarkably distinctive pairwise
contacts. Experiments show that the Au-Pt-CdS heterostructures exhibit
hydrogen-production efficiencies about 8 times higher than that of
Au-CdS heterostructures and approximately 223 times higher than that
of Au-Pt heterostructures, and also demonstrates excellent photocatalytic
stability. Owing to the work function difference between the metal
and the semiconductor, this heterostructure generates unique band
bending and an intrinsic electric field at the interface, effectively
facilitating the separation and multipath directional transport of
photogenerated charge carriers, thereby significantly enhancing the
rate of photocatalytic hydrogen evolution. Our study provides valuable
guidance for the rational design of high-efficiency semiconductor-metal
heterostructured photocatalysts and holds significant promise for
advancing low-carbon energy solutions and promoting sustainable societal
development.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 30
·40218-40231
·
IF 7.8
Xu Tianyu,Zhong Jun,Dai Chengbai,Du Yimin,Lyu Xinzhe,Ma Tian,Zhang Panpan,Zhu Xiaojia,Li Zheng,Quan Cheng,Hu Yuting
Osteoarthritis (OA) is a chronic degenerative disease causing bone and cartilage deterioration, joint deformity, and functional loss. The initiation and progression of OA are primarily driven by oxidative stress and the abnormal activation of the Wnt/β-catenin signaling pathway. This study involved loading Resveratrol (Res) and platinum (Pt) nanozymes, which exhibit superoxide dismutase (SOD) and catalase (CAT), onto a metal-organic framework (MOF) due to its distinctive porosity and high loading capacity. The system was further modified with hyaluronic acid (HA) to synthesize Pt-MOF/Res@HA (PMRH) nanoparticles. The PMRH nanoparticles improve early OA prevention and treatment by concurrently inhibiting the Wnt/β-catenin signaling pathway and eliminating reactive oxygen species (ROS). Experimental results, both in vitro and in vivo, indicate that PMRH nanoparticles efficiently scavenge ROS within the OA microenvironment. The PMRH nanoparticles inhibit the overactive Wnt/β-catenin signaling pathway in chondrocytes affected by osteoarthritis. This dual-target approach, which addresses oxidative stress and inhibits the Wnt/β-catenin signaling pathway, shows promising therapeutic potential for OA.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LANGMUIR
·
2026
·Vol. 42
·期 28
·20814-20827
·
IF 4.4
Wu Chonglin,Hao Lei,Fan Kaitong,Zhang Chunfeng,Zhang Xiaojun,Xu Hong,Dong Jinxiang
Synthetic montmorillonite (MMT) was prepared via a hydrothermal
method and further modified through organic intercalation to obtain
organically modified montmorillonite (OMMT). Using OMMT as an oil
additive, four-ball tribological tests showed that both alkyl chain
length and intercalation level play critical roles in lubrication
performance, with longer chains and higher organic loadings resulting
in improved friction-reduction and antiwear properties. Under high-load
and long-duration conditions, the synthetic OMMT/ZDDP composite additive
exhibited excellent lubrication stability and antiwear capability,
significantly outperforming naturally derived organically modified
montmorillonite NOMMT/ZDDP oil. The enhanced performance was attributed
to the formation of a stable composite tribofilm, which combines the
load-bearing capacity of the inorganic layered structure with the
self-repairing capability of the tribochemical reaction film. Modified
synthetic montmorillonite provides a uniform interlayer structure
for the development of a stable, synergistic lubricating protective
film.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small Methods
·
2026
·
IF 8.7
Yulin Cai,Dunren He,Yaocheng Yang,Yunfan He,Dongmei Liu,Liujia Liu,Biao Gao,Zijun Kang,Huihui Huang
Hydrovoltaic energy harvesting offers a promising approach for self-powered electronics, but practical applications remain limited by insufficient output performance, challenges in scalable integration, and incomplete mechanistic understanding. Here, asymmetric carbon-film hydrovoltaic generators with work-function-correlated output are reported for both liquid-water and hydrogel-assisted moisture operation. A single liquid-water carbon-film hydrovoltaic generator (C-HEG) delivers ≈1.1 V and 450 µA cm − 2 , while a hydrogel-assisted carbon-film moisture-electric generator (C-MEG) delivers ≈1.0 V and 350 µA cm − 2 under ambient humidity. Modular integration scales the voltage up to ≈92 V and enables milliampere-level output currents, demonstrating the feasibility of scalable energy harvesting and power supply for small electronics. Quantitative UPS/KPFM analyses, together with comparative equivalent-circuit modeling, reveal a consistent correlation between the initial output voltage and the work-function contrast, indicating that work-function contrast can serve as a measurable descriptor of electronic asymmetry. The observed output is associated with the coupled effects of electronic asymmetry, water-mediated interfacial charging/electric-double-layer development, and hydrated-ion transport. These results suggest that electronic-structure-guided interfacial engineering may assist the optimization of asymmetric carbon-film hydrovoltaic generators for scalable self-powered and wearable electronics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
AQUATIC TOXICOLOGY
·
2026
·
IF 4.6
Sai Wu,Chunhui Zhang,Hongwen Sun,Cuiping Wang
Understanding the size-dependent behavior of iron oxide nanoparticles in crop systems is critical for assessing their environmental risks and application potential. In this study, α-Fe 2 O 3 materials with particle sizes of 25 nm, 200 nm, and 400 nm were successfully synthesized and systematically evaluated for their transport, transformation, and physiological effects on rice. Among these, the 25 nm α-Fe 2 O 3 exhibited a higher zeta potential, facilitating electrostatic interaction with the negatively charged rice surface. Exposure to α-Fe 2 O 3 increased the formation of iron plaque on root surfaces, with the most pronounced effect observed for the 25 nm particles. While iron plaque enhanced the immobilization of metal elements on the root surface, it concurrently hindered the uptake of both metal and non-metal elements by rice roots. Root exudates secretion was stimulated by α-Fe 2 O 3 exposure, with larger particles inducing a more pronounced secretory response at equivalent concentrations (TOC increased by 12.91-23.82%). Electron transfer interactions between α-Fe 2 O 3 and root exudates occurred in the rhizosphere, leading to the reduction of Fe(III) to Fe(II), large particle size α-Fe 2 O 3 induces more root exudates and more pronounced Fe (III)/Fe (II) transformation. Rice growth was promoted by exposure to 50 mg/L of 25 nm α-Fe 2 O 3 , but inhibited at 500 mg/L. In contrast, larger particles consistently promoted growth, albeit with diminished efficacy at higher concentrations. Exposure to α-Fe 2 O 3 , particularly the 25 nm particles, triggered significant increases in reactive oxygen species (ROS) levels, plasma membrane permeability, antioxidant enzyme activities, and lipid peroxide content in rice roots. These findings provide a mechanistic basis for understanding the size-dependent phytotoxicity and transformation behavior, and offering insights for its application in controlling pollutant migration in agricultural systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·Vol. 65
·期 29
·15459-15472
·
IF 3.9
Li Xiaolong,Zhang Yahui,Sun Gangqun,Sun Manni,Wang Xiru,Yang Zhiyan,Zhao Zhuoya,Li Mengjie,Ma Yongning,Huang Wei,Zhu Junli,Yang Yuhao
The
development of high-performance catalysts enabling CO-free
hydrogen production via aqueous-phase reforming of methanol (APRM)
is crucial for integrated methanol-to-hydrogen and hydrogen fuel cell
systems. Herein, a tandem Pt/Fe 5 C 2 :Fe 3 N@C catalyst was prepared via a temperature-programmed carbonization-nitridation
method followed by photoreduction deposition. Remarkably, the catalyst
delivers efficient CO-free H 2 production even at temperatures
as high as 210 ° C. The catalyst features a strong metal–support
interaction between Pt and Fe 5 C 2 , and a weaker
interaction between Pt and Fe 3 N. Mechanistic investigations
decouple the functions of the individual components. The carbon support
primarily serves to disperse the active components. The Pt–Fe
interface provides the active sites for methanol decomposition (CH 3 OH → CO + 2H 2 ). The resulting CO is completely
consumed through two subsequent reactions: most undergoes the water–gas
shift reaction (CO + H 2 O → CO 2 + H 2 ) on the surfaces of Fe 3 N and Fe 5 C 2 , with Fe 3 N being the dominant active phase, while
the remaining trace CO undergoes methanation (CO + 3H 2 →
CH 4 + H 2 O), for which Fe 5 C 2 is the principal active site. This synergistic cascade of reactions
enables the Pt/Fe 5 C 2 :Fe 3 N@C catalyst
to achieve highly efficient CO-free hydrogen production from APRM.
This work offers insights into designing catalysts for CO-free hydrogen
generation from alcohol-based liquid organic hydrogen carriers and
may accelerate the integrated industrialization of the methanol-to-hydrogen
and hydrogen fuel cell technology.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Ke Shi,Shixin Cai,Yitong Zhao,Rui Yi,Haiyong Yao,Xiaoli Wang,Yuting Zhang,Nandi Zhou
The multiplex detection of pathogenic bacteria is vital yet hindered by the inefficiency of conventional methods for rapid, on-site analysis. Here, we develop a magnetic encoding-based spatial separation system that integrates a dual-mode aptasensor for simultaneous detection of multiple pathogenic bacteria on a single-channel microfluidic chip. The core of this system lies in the synthesis of magnetically encoded SiO 2 nanospheres embedded with tunable amounts of Fe 3 O 4 nanoparticles. These nanospheres are functionalized with quantum dots and specific cDNA sequences, and further coupled with aptamer-modified gold nanoparticles to form fluorescence and UV–vis dual-mode signal probes. Upon target recognition, exemplified by Staphylococcus aureus and Escherichia coli , the dissociation of aptamer-AuNPs leads to quantifiable fluorescence enhancement and UV–vis absorption reduction. Crucially, the magnetic properties of the encoded nanospheres allow their rapid spatial separation and enrichment within a single-channel microfluidic device under a tailored magnetic field, eliminating the need for complex channel architectures. The chip is fabricated via computer numerical control machining combined with a 3D-printed magnetic module to form an on-site platform. Coupled with a smart device for signal analysis, this platform achieves multiplex detection within 40 min, offering a simple and real-time strategy for multiplex monitoring pathogens in environmental analysis.
✓ 已验证
产品关联
DOI
高影响因子