JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Aiguo Feng,Libo Yang,Chengsong Zhong,Bihong Chen,Hao Chen,Jinyu Wu,Xiangbiao Yin,Xinpeng Wang
Radioactive iodine has garnered extensive attention due to its severe hazards to human health and the environment. However, the ubiquitous presence of water vapor during iodine vapor capture significantly impairs the adsorption performance. This often leads to reduced activity or even deactivation of adsorbents. To achieve efficient iodine capture and stable immobilization under high-humidity conditions, this study constructed an environmentally friendly MOF-on-COF architecture (Tp-UiO) with multifunctional sites and a three-dimensional framework using the in-situ growth of a metal-organic framework (UiO-66-NH 2 ) on a three-dimensional scaffold of a covalent organic framework (Tp-Azo). Among the samples, the 200Tp-UiO sample exhibited a saturation adsorption capacity of 2585 mg/g under dry static adsorption conditions. This result represented a 261.5% and 55.1% improvement compared to UiO-66-NH 2 and Tp-Azo, respectively. The saturation adsorption capacity reached 2004 mg/g at a relative humidity of 74%, exceeding that of most reported adsorbents. Moreover, after iodine uptake and 7 days of storage, the iodine retention rate remained greater than 95%. A series of detailed characterizations confirmed that the excellent adsorption performance was attributed to the construction of the unique pore structure and the synergistic interactions among multiple functional sites (N − H, N = N, C O, and Zr−O groups). This study elucidated the feasibility of the MOF-on-COF composite structures for radioactive iodine adsorption in high-humidity environments and offered a novel perspective for the field of radioactive iodine capture.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Analytical Methods
·
2026
·
IF 3
Shengyi Fang,Sheng Ye,Dan Ouyang,Songyan Tie,Jianzhong Cao
Nanocatalysts based on metal-organic frameworks exhibit limited catalytic activity due to their symmetrical inactive structures, thereby restricting their application in nanozyme-linked immunoassays (NLISA). This work constructed geometrically structure expanded Cu-Co bimetallic metal-organic frameworks (GS-CCBM) nanozymes through a two-step hydrothermal and alkali treatment, enabling a specific nanozyme-based immunoassay for the target alpha-fetoprotein (AFP). The constructed GS-CCBM nanozyme demonstrated excellent substrate affinity (Km = 1.79 mM) and H2O2 reaction rate (Vm = 8.569 μmol min-1). Based on this, a signal probe was constructed that enables changes in the absorbance and color of the catalytic system in the presence of the target AFP. Semi-quantitative and quantitative analyses were performed using a self-developed color value extraction system. Under optimized conditions, the constructed NLISA method demonstrated an acceptable working range (0.01–50 ng mL⁻¹) and a sensitive detection limit (LOD = 4.7 pg mL⁻¹) for AFP. This approach innovatively proposes a novel strategy for constructing highly efficient MOF-based nanozymes with catalytic activity, offering a new method for developing novel clinical detection techniques.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Muhammad Sohail Asghar,Muhammad Sultan Irshad,Zainab Elqahtani,Tahira Shabbir,Naila Arshad,Muneerah Alomar,Ghazala Maqsood,Muhammad Atif Ali,Muhammad Sabir,Jinhua Li,Jian Zhang,Fuchao Yang,Zhiguang Guo
Simultaneous freshwater and electricity generation from solar evaporation presents a promising strategy for addressing water-energy scarcity. However, existing devices typically suffer from fixed functionality and compromised performance in either mode. This work introduces a novel symmetric-asymmetric solar evaporator enabling switchable harvesting of both freshwater and electricity on demand. Herein, the device leverages a reversible structural transition: symmetric configuration (indirect) for high-efficiency solar desalination 2.14 kg m −2 h −1 , photo-thermoelectric generation (Vout ∼308 mV, Iout ∼71 mA), and asymmetric configuration (direct) for spontaneous electricity generation (Vout ∼364 mV, Iout ∼78 mA), and an evaporation rate of 1.41 kg m −2 h −1 under 1 kWm −2 . This dual-mode operation is achieved through a simple, scalable nanomaterial design facilitating thermal-gradient behavior in both modes. State of-the-art experimental investigations were performed to assess the reproducibility, switching behavior, and long-term stability. The successful outdoor results under natural conditions enabled dual-mode solar evaporators as an effective strategy to harvest solar energy as well as waste heat for concurrent freshwater and electricity generation. More importantly, heat transfer simulations were effectively carried out to scrutinize the energy flow in dual-mode solar evaporators. This study demonstrates a highly effective approach to overcome the limitations of traditional solar interfacial evaporation and generate dual-mode in situ thermoelectricity and stable desalination under natural conditions.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2026
·
IF 12.7
Jianing Fan,Baiyan Cheng,Wenyuan Dai,Manyuan Gan,Xiandong Huang,Ying Hou,Yanhui Song,Peizhi Liu,Haojie Liang,Yanzhen Liu,Wei Jia,Haixia Zhang,Junjie Guo
Novel Fe 2 N 6 -LaN 4 triatomic sites are constructed using a ZIF-8 precursor. • La doping breaks the symmetry of Fe pairs, boosting intrinsic activity. • Fe-La/N-C exhibits excellent ORR performance in pH-universal electrolytes. The transition monometallic atom/nitrogen -doped carbon catalysts (TM/N-C) for the oxygen reduction reaction (ORR), including single-atom TM/N-C (SACs) and homonuclear double-atom TM/N-C (DACs), typically feature active sites with symmetric MN 4 or M 2 N 6 moieties. This symmetry often causes unfavorable intermediate adsorption and slow kinetics, resulting in limited activity. An asymmetric trinuclear active site (Fe 2 N 6 -LaN 4 ), consisting of a central N-coordinated La atom flanked by two Fe atoms, is anchored into the carbon framework through a straightforward one-step pyrolysis of Fe, La-codoped zeolitic imidazolate framework-8 (ZIF-8). After introducing the rare earth metal La atom, the Fe d-band center shifts toward the negative direction, thus the interaction between the active sites and the intermediates is weakened, which decreases the reaction barrier during the ORR. The resulting Fe 2 N 6 -LaN 4 triatomic catalyst (Fe-La/N-C TAC) shows improved electrocatalytic activity for the ORR, with half-wave potentials ( E 1/2 ) of 0.910 V in alkaline electrolyte and 0.795 V in acidic electrolyte, significantly surpassing SAC and DAC counterparts. In addition, Zn-air battery (ZAB) utilizing Fe-La/N-C as the air electrode catalyst achieves a capacity of 810 mA h g −1 . This work provides a promising atomically dispersed heterometallic electrocatalyst with potential applications in energy conversion. Download: Download high-res image (297KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124861
·
IF 7.5
Shuaishuai Zhang,Jun Zhang,Limei Sun,Yulong Feng,Jiaxi Wang,Yiheng Chi,Kunling Jiao,Yao Zhang,Alireza Babaei,Wenyi Tan
Despite the great potential of capacitive deionization (CDI) in low-cost and eco-friendly phosphate wastewater treatment, the insufficient active sites and sluggish electrochemical kinetics of conventional electrode materials severely limit its dephosphorization performance. Herein, a series of La-doped CeO 2 composites were successfully fabricated via a MOF-derived calcination strategy. Moderate La doping induces abundant surface oxygen vacancies and Ce 3 + active sites while maintaining the original rod-like morphology and cubic fluorite structure of CeO 2 . Benefiting from the optimized defect configuration and porous structure, the optimal La 0.5 CeO 2 electrode achieves rapid electron migration and ion transport, and exhibits a high specific capacitance of 42.53 F/g at 2 A/g. Profiting from the excellent electrochemical characteristics, the La 0.5 CeO 2 electrode delivers excellent CDI dephosphorization performance with a high phosphate electrosorption capacity of 11.5 mg P/g at 1.2 V, a superior charge efficiency of 139.45% and a low energy consumption of 0.19 kWh/kg P, and maintains 99.5% of its initial performance after 20 cycling tests. The excellent phosphate removal capability originates from the synergistic effects of electric-field-driven electrostatic adsorption, oxygen vacancy-mediated ligand exchange and strong Ce/La–O–P chemical coordination. This work provides a feasible strategy for the design and fabrication of high-efficiency rare-earth-based electrodes for CDI water purification.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Technological Sciences
·
2026
·Vol. 69
·期 9
·1920301
·
IF 5.1
Gu Xin,Wang Yue,Yang Shengnan,Fu Yifeng,Bai Xiuqin,Cao Pan
The hydrodynamic performance of underwater vehicles is significantly constrained by skin friction drag, which constitutes the predominant component of total resistance. Inspired by the imbricated array architecture of tuna skin scales and the exceptional surface characteristics of zeolitic imidazolate framework-8 (ZIF-8), this study fabricates bio-inspired surfaces with gradient inclination angles via stereolithography 3D printing, followed by surface functionalization using an optimized spray-coating process. Systematic characterization confirms that the resulting modified biomimetic surface (MBS) 30° exhibits a water contact angle of 152.9°, indicating stable superhydrophobicity, and achieves an outstanding drag reduction rate of 92.1% in experimental tests, significantly surpassing the performance of individual structural or coating strategies. Durability and adhesion tests demonstrate remarkable mechanical robustness and excellent resistance to water erosion. Moreover, the surface displays efficient self-cleaning and anti-icing capabilities, while maintaining high drag reduction stability even under harsh chemical conditions including strong acids and alkalis. Numerical simulations reveal that the superior performance originates from the synergistic effect between the vortex-stabilizing biomimetic macrostructure and the interface slip induced by the ZIF-8 micro-nano structure. This study provides new insights and a technical pathway for developing high-performance drag-reduction coatings for marine equipment.
✓ 已验证
产品关联
DOI
高影响因子
ACS Food Science & Technology
·
2026
·Vol. 6
·期 8
·2570-2583
·
IF 3
He Wanjun,Lv Danyu,Wu Qingxiao,Xu Huanyu,Guan Yongguang,Zeng Xin-An
Litchi
( L. chinensis Sonn.) is a
perishable fruit that is vulnerable to oxidative browning and fungal
infection. Herein, ferulic acid and natamycin were chosen as the antioxidant
and antimycotic agents, respectively. To improve their water solubility,
we used CD-MOF-1 to encapsulate ferulic acid. Meanwhile, natamycin
was encapsulated with gum arabic and pullulan. The most homogeneous
and stable natamycin nanocapsules were fabricated through stirring
0.5 mg/mL natamycin using 2.5% (w/v) gum arabic-pullulan (1:1, w/w,
1.25% each) in water. The main encapsulation mechanisms of ferulic
acid and natamycin were electrostatic interactions between the carboxyl
groups of ferulic acid and K + ions from CD-MOF-1 and hydrophobic
interactions between the macrocyclic lactone ring of natamycin and
the protein part of gum arabic, respectively. In addition, pullulan
was indispensable for stabilizing natamycin. The antioxidant and antifungal
composite sol presented 99.85% oxidation inhibition and 79.06% mycelial
growth inhibition and effectively delayed the oxidative browning and
fungal decay on litchi pericarps.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Xiaolei Zhang,Nan Gao,Zong Tan,Dongjun Lv,Zhongmin Liu,Qi Tang,Fei Yang,Xiaoli Wang,Hui Zhao,Xueting Liu,Jinyang Li,Jiahao Wang
ER-Fc-MOF@CF monolith integrates PE capture and Fenton-like oxidation. • Carbonization tunes conductivity, defects, and MOF anchoring on CF. • CF-900 achieves 91.14% PE removal under flow-through conditions. • Captured PE undergoes localized ROS-mediated surface oxidation. • Monolithic design reduces powder catalyst loss and secondary release. Microplastic remediation requires efficient particle capture and interfacial oxidation because dispersed polymers have limited contact with short-lived reactive oxygen species (ROS) in bulk solution. Here, an electroresponsive ferrocene metal–organic framework (ER-Fc-MOF) was grown in situ on thermally engineered foam carbon (CF) to construct ER-Fc-MOF@CF monoliths for polyethylene microplastic capture and subsequent electro-Fenton-like treatment. Carbonization temperature regulated the scaffold architecture, surface chemistry, defect structure, electrical resistivity, and ER-Fc-MOF coverage. Among the investigated samples, CF-900 retained accessible hierarchical porosity while exhibiting the lowest resistivity and densest ER-Fc-MOF coverage. The optimized ER-Fc-MOF@CF-900 achieved 91.14% flow-through removal from a 100 mg·L −1 polyethylene (PE) suspension. Zeta-potential, FTIR, and XPS analyses suggested pH-dependent electrostatic attraction and localized polar interactions involving oxygen-containing groups, while the interconnected monolith facilitated particle interception and retention. The low-resistance CF-900 scaffold supported electron transport and H 2 O 2 activation at ER-Fc-MOF domains. SEM, EDS, FTIR, and XPS showed progressive PE surface oxidation, including roughening, oxygen enrichment, and increased C O, C O, and O–C=O signals, while EPR identified ·OH, ·O 2 − , and 1 O 2 . After 36 h, dissolved organic carbon (DOC) reached 67.21 mg·L −1 in the PE-containing system versus 8.80 mg·L −1 in the PE-free control, supporting PE-associated dissolved organic carbon release. This work establishes a self-supporting MOF–carbon platform coupling PE capture, flow-through interception, and interfacial oxidative transformation. Download: Download high-res image (205KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2026
·
IF 4.8
Tingting Cheng,Changguo Xue,Chaonan Lv,Hong Hong Zhu,Hanjie Jiang,Congyu Zuo,Song Liu,Jinsong Hu
A flexible filter paper-based FP/AgNWs@ZIF-8 SERS platform enables rapid on-site detection of ferbam residues. • The optimized substrate shows high sensitivity, uniformity, and batch-to-batch reproducibility. • Synergistic electromagnetic and chemical enhancement enables trace ferbam detection in apple samples. The extensive use of the fungicide ferbam in food matrices necessitates effective monitoring due to its toxicity; however, constructing flexible on-site sensing platforms for the sensitive and rapid trace-level analysis of ferbam remains highly challenging. Herein, we report a flexible filter paper-supported silver nanowire@zeolitic imidazolate framework-8 (FP/AgNWs@ZIF-8) sensing platform for the surface-enhanced Raman spectroscopy (SERS) detection of trace ferbam pesticide residues on fruit surfaces. The effect of ZIF-8 growth time on the Raman signal of the sensing platform was investigated, and 40 min was identified as the optimal growth time for enhancing the Raman response toward aromatic molecules, such as methylene blue (MB), 4-mercaptobenzoic acid(4-MBA), and malachite green (MG). Under this condition, the FP/AgNWs@ZIF-8 sensing platform showed strong linearity for MB concentrations ranging from 10 −6 M to 10 −10 M, with a low limit of detection (LOD) of 1.17 × 10 −11 M, good uniformity, and strong batch-to-batch stability. When applied to ferbam detection, the sensor shows good linearity over a concentration range from 10 −3 to 10 −7 M, with an LOD as low as 10 −7 M, good reproducibility, and strong batch-to-batch stability. In addition, the sensor is capable of determining trace ferbam residues on apple surfaces, as demonstrated by wiping-sampling experiments, showing reliable linear detection of ferbam over a wide concentration range. Overall, the proposed synergistic interplay between the electromagnetic and chemical mechanisms intrinsic to the metal-organic framework-based SERS platform provides a viable strategy for trace pesticide analysis in fruits and vegetables. Download: Download high-res image (129KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·Vol. 61
·期 44
·34779-34794
·
IF 4.4
Wen Lihan,Shen Juan,Wu Shuangxian,Jin Bo
Radioactive strontium ( 90 Sr) contamination in water bodies poses one of the most persistent and serious threats to both ecological safety and public health, owing to its long half-life, high environmental mobility, and strong propensity for biological accumulation. However, a rapid and sustainable synthetic route for bimetallic MOF-74 with high Sr 2+ adsorption capacity remains lacking. This study reports a solvent‑free mechanochemical strategy for the synthesis of a bimetallic Cu/Zn-MOF-74 (CZ-M74-11) using a spiral gas-solid flow (S-GSF) method in just 1 min. The material achieves 98.26% Sr 2+ removal within 15 min and exhibits a maximum Langmuir adsorption capacity of 295.13 mg·g −1 at 303.15 K. Kinetic and thermodynamic analyses indicate that the adsorption is spontaneous and exothermic. XPS and FT-IR analyses, together with cyclic desorption data, reveal that Sr 2+ uptake proceeds primarily through outer-sphere complexation, with a minor contribution from inner‑sphere coordination involving carboxylate groups. This work addresses the gap in rapid and sustainable routes for bimetallic MOF-74 synthesis by introducing an S-GSF method that achieves excellent adsorption capacity and ultrafast kinetics for Sr 2+ removal. Graphical abstract
✓ 已验证
DOI
高影响因子
Chemosensors
·
2025
·Vol. 13
·期 6
·200
·
IF 3.7
Xuanlin Feng,Jiaqi Zhao,Shiwei Wu,Ying Kan,Honemei Li,Weifei Zhang
Hydroxychloroquine (HCQ), a cornerstone therapeutic agent for autoimmune diseases, requires precise serum concentration monitoring due to its narrow therapeutic window. Current HCQ monitoring methods such as HPLC and LC-MS/MS are sensitive but costly and complex. While electrochemical sensors offer rapid, cost-effective detection, their large chambers and high sample consumption hinder point-of-care use. To address these challenges, we developed a microfluidic electrochemical sensing platform based on a screen-printed carbon electrode (SPCE) modified with a hierarchical nanocomposite of gold nanoparticles (AuNPs), copper-based metal–organic frameworks (Cu-MOFs), and multi-walled carbon nanotubes (MWCNTs). The Cu-MOF provided high porosity and analyte enrichment, MWCNTs established a 3D conductive network to enhance electron transfer, and AuNPs further optimized catalytic activity through localized plasmonic effects. Structural characterization (SEM, XRD, FT-IR) confirmed the successful integration of these components via π-π stacking and metal–carboxylate coordination. Electrochemical analyses (CV, EIS, DPV) revealed exceptional performance, with a wide linear range (0.05–50 μM), a low detection limit (19 nM, S/N = 3), and a rapid response time (<5 min). The sensor exhibited outstanding selectivity against common interferents, high reproducibility (RSD = 3.15%), and long-term stability (98% signal retention after 15 days). By integrating the nanocomposite-modified SPCE into a microfluidic chip, we achieved accurate HCQ detection in 50 μL of serum, with recovery rates of 95.0–103.0%, meeting FDA validation criteria. This portable platform combines the synergistic advantages of nanomaterials with microfluidic miniaturization, offering a robust and practical tool for real-time therapeutic drug monitoring in clinical settings.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2025
·
IF 9.8
Shuyu Liu,Liang Tian,Lihua Han,Qing Li,Liangliang Zhu,Su Chen
The conversion of waste plastics into metal-organic framework (MOF) photothermal materials presents promising opportunities for solar energy conversion, facilitating freshwater production and water purification through interfacial solar evaporation, and simultaneously heralding advancements in plastic waste recycling. Herein, we present a bimetallic Co/Fe-MOF photothermal converting material derived from PBAT-based plastic wastes, tailored for efficient solar water evaporation. The nanosheet-structured bimetallic Co/Fe-MOF featuring high light absorption, water wettability and photothermal conversion efficiency delivers an optimal evaporation rate of 1.81 kg m −2 h −1 under one sun irradiation, surpassing that of monometallic MOFs. Moreover, we employed three substrates—nanofiber film, aerogel, and hydrogel—to immobilize the Co/Fe-MOF solar absorbers, thereby constructing monolithic hybrid solar evaporators. These substrates not only confer the flexibility to Co/Fe-MOF solar absorbers for practicability but also serve as mediates to regulate thermal management and water states. Consequently, the hybrid evaporators exhibited significantly enhanced evaporation rates, with the hydrogel evaporator achieving to ~3.53 kg m −2 h −1 , coupled with remarkable salt resistance and durability. This bimetallic Co/Fe-MOF-based solar evaporator efficiently serves a dual purpose, enhancing clean water production through solar desalination and purification while also presenting a viable alternative to the issue of plastic waste, potentially harmonizing energy, environment and clean water nexus.
✓ 已验证
产品关联
DOI
高影响因子