Ecological Processes
·
2025
·Vol. 14
·期 1
·1-17
·
IF 3.9
Zhang Hanyue,Du Yan,Pan Hongbing,Li Min,Hu Shiwen,Tang Yuanyuan,Wang Hanjie,Liu Xin,Hu Bin,Bao Weikai
Background Deforestation for terraced orchards, a common agricultural development pattern in mountainous ecosystems, drastically modifies soil physicochemical and biological properties. This conversion can affect soil microbial carbon use efficiency (CUE), which is a crucial indicator of soil carbon dynamics. However, the impact of this conversion on CUE remains unclear. Understanding how deforestation affects CUE will help predict soil carbon dynamics and guide the development of sustainable ecosystem strategies in fragile mountainous areas. Methods Herein, the response of CUE to environmental variations induced by deforestation for terraced orchards in an arid valley was explored. We quantified CUE using the 18 O-labeled water addition method. To identify the underlying driving factors, soil properties and microbial parameters were measured concurrently. Results Microbial CUE declined significantly after forest conversion to terraced orchards. Multiple factors, including soil micro-environmental conditions, stoichiometric traits, enzymatic properties, and microbial community attributes, were all closely associated with CUE. Furthermore, hierarchical partitioning analysis revealed soil stoichiometric traits as the primary drivers of CUE reduction, especially traits associated with the C:N and C:P ratios. During the conversion process, mechanical compaction and horizon inversion increased soil bulk density and clay content, thereby reducing soil aeration. These micro-environmental constraints were closely linked to intensified imbalances in the C:N and C:P ratios between microbes and soil. Along with the reduced soil C:N ratio, these stoichiometric shifts made it more difficult for microorganisms to obtain resources. Therefore, microbial C limitation intensified, soil microbes shifted from being primarily limited by P in forests to being co-limited by C and P in terraced orchards, which in turn stimulated greater microbial investment in resource-acquiring hydrolytic enzymes. Consequently, CUE declined because microbial growth decreased more significantly than microbial respiration. Conclusion In summary, deforestation for terraced orchards in the arid valley reduced CUE by constraining soil micro-environments and resource conditions. These findings advance our understanding of CUE variations following deforestation and have important implications for soil carbon cycling in vulnerable mountain ecosystems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD COMPOSITION AND ANALYSIS
·
2025
·
IF 4.6
Wenhao Du,Yunfei Lu,Jiazi Yin,Tianhong Liu,Zenghui Wan,Yina Zeng,Long Yu,Chao Yuan,Ziqi Liu,Suhua Wang
Chlortetracycline (CTC), a widely used broad-spectrum antibiotic in animal husbandry, poses potential health risks due to its residues in food, highlighting the urgent need for efficient detection strategies. In this study, a fluorescent sensing platform for sensitive and onsite Chlortetracycline detection was constructed and evaluated using an aluminum-based metal-organic framework (CYCU-3) as the fluorescent probe. The sensing platform exhibited high sensitivity, achieving a remarkably low detection limit of 45.5 nM and limit of quantitation of 151.7 nM in the contraction of 1-10 μM. The CYCU-3 possessed a favorable pore size distribution and a large specific surface area, which contributed to its excellent Chlortetracycline adsorption capacity (137.40 mg·g⁻¹). For practical application, the CYCU-3 was immobilized in special test paper and integrated with smartphone data processing to fabricate the sensing platform for rapid and on-site quantitative analysis of Chlortetracycline residues in food and water (R 2 = 0.994). This work provides a promising and practical approach for rapid and sensitive Chlortetracycline monitoring in environmental and food safety contexts.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2025
·
IF 4
Hu Chang-Ning,He Jie,He Yu-Ting,Peng Yin-Jie
Conductive hydrogels derived from natural polymers have attracted increasing attention in wearable electronics due to their inherent biocompatibility and sustainability. However, their poor mechanical strength, limited conductivity and unsatisfactory environmental adaptability remain significant challenges for practical applications. In this study, we report a high-performance gelatin-based conductive hydrogel (GPC) reinforced with polypyrrole-decorated cellulose nanofibers (PPy@CNF) and enhanced by a zwitterionic betaine/(NH 4 ) 2 SO 4 solution. The PPy@CNF hybrid nanofillers were synthesized via in situ oxidative polymerization, enabling homogeneous dispersion of PPy along the CNF surface. The incorporation of PPy@CNF significantly improved both mechanical strength and conductivity of the gelatin hydrogel. Meanwhile, the Hofmeister effect induced by (NH 4 ) 2 SO 4 strengthened the hydrogel network, and the introduction of betaine further enhanced its anti-freezing and moisture-retention properties. The optimized GPC hydrogel exhibited a high tensile strength of 1.02 MPa, conductivity of 1.5 S·m -1 , and stable performance at temperatures down to -50 °C. Furthermore, it was successfully assembled into a wearable strain sensor for real-time human motion monitoring, and as an electrode layer in a flexible triboelectric nanogenerator (TENG), enabling biomechanical energy harvesting and self-powered sensing. This work provides a promising strategy for developing sustainable, multifunctional hydrogels for next-generation wearable electronics.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2025
·
IF 9.2
Huihui Ding,Huanhuan Wu,Jun Ma,Xiang Li,Shuangshuang Huai,Shijian Zhang,Wenbin Ruan,Xiuxiu Huang,Xiufang Wang,Wenjie Xie
The high interfacial charge transfer barrier has been a primary thermodynamic obstacle in enhancing the catalytic performance of heterojunction materials. Optimizing the interfacial environment is a promising strategy to attain superior catalytic efficiency. Hence, a Bi/Bi2MoO6/Bi24O31Br10 (Bi/BMO/BOB) composite photocatalyst was constructed by introducing a Bi–O–Mo bridge bond between the BMO and BOB interfaces and modifying metal active sites on the surface of the complex. Bi/BMO/BOB has a good capacity for CO2 photoreduction to CO. The CO yield of the Bi/BMO/BOB photocatalyst is 68.29 μmol g−1 h−1, which is obviously higher than those of the pristine BMO and BOB. As proved by density functional theory (DFT) calculations and experimental characterization, the Bi–O–Mo interface bridge bond adjusts the electronic structure of the contact interface and enhances the interface charge separation and transport rate. Moreover, the metal Bi nanoparticles synthesized through in situ reduction not only realize electron transfer and storage as electron collectors, but also strengthen the adsorption of CO2 molecules. The synergistic action of the two can allow the effective transfer of photogenerated electrons from BMO to BOB, which then accumulate on Bi. Such stepwise transfer of electrons increases the speed of photocatalytic reduction processes that involve multiple electrons, and effectively reduces the reaction energy barrier in the process of CO2 reduction. This mode of interatomic electron transfer bridges combined with the metal active sites not only solves the stability issues in bismuth-based semiconductors, but also aids in the development of more efficient photocatalytic systems for reduction of CO2.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2025
·
IF 10
Zhangheng Wang,Zhengguo Li,Minghui Liu,Huwei Yan,Weihua Zou,Suxia Li,Xiaofeng Hao,Delin Sun,Xiaochuan Song
The pervasive use of high-VOC solvent-based coatings in wooden furniture poses critical environmental challenges. Herein, we engineer a bio-inspired superamphiphobic coating through molecularly designed integration of Si-Ti@PDMS sol with fluorosilanes, achieving dual liquid-repellent functionality on wood substrates. The hierarchical micro-nano architecture (Rq = 271 nm) coupled with ultralow surface energy yields excellent wetting properties, and the water contact angle (WCA) is 159.2°, and the sliding angle (SA) is 1°; the contact angles (CA) of ethylene glycol and oleic acid are 152.1° and 141.9°, respectively. Crucially, the coating demonstrates exceptional durability against physicochemical stressors, including acid/alkali corrosion, organic solvents, UV radiation, and mechanical abrasion, while meeting stringent furniture industry standards for thermal shock resistance, impact tolerance, and wear endurance. The green protection technology of the wood surface eliminates VOC emissions during application and extends furniture lifespan through intrinsic self-cleaning and anti-fouling mechanisms. The work establishes a scalable green coating platform that bridges nanomaterial innovation with sustainable manufacturing. It is beneficial to use green superhydrophobic coatings as an environmentally friendly solution for wood protection.
✓ 已验证
产品关联
DOI
高影响因子
Food Chemistry-X
·
2025
·
IF 8.2
Wanbing Li,Wei Wang,Yue Cao,Bolong Fang,Haoze Li,Xiaole Zhao,Jine Wu,Chao Chang
This study aimed to prepare hollow salt microspheres using hydroxypropyl-β-cyclodextrin (HP-β-CD) and soybean soluble polysaccharides (SSPS) by spray drying to address the issues of moisture absorption and caking of hollow salt microspheres when using SSPS as a single wall material. Measurements using a water activity meter, electronic tongue, and scanning electron microscope showed that the SSPS/HP-β-CD hollow salt microspheres with a mass ratio of 1:1 had the best physical properties, such as low water content (2.43 %), low water activity (0.285), strong salty taste perception, complete spherical appearance, and good fluidity. This investigation involved evaluating the influence of hollow salt microspheres on dough rheology and bread quality. Notably, the application of these microspheres to achieve a 15 % reduction in sodium content enhanced both dough and bread quality attributes. This work presents an effective technical strategy for salt reduction in baked goods, thereby expanding the application of hollow salt microspheres beyond their conventional use as topical seasoning materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Jing Yang,Zhu Liang,Hui Zhao,Jingping Huang,Ying Song,Jingyu Zhu,Yishu Yan,Yuntao Zhu
IFN-γ has been shown to exert potent anti-fibrotic effects in early stages of liver fibrosis, but the drug development has been impeded by systemic toxicity arising from off-target receptor activation. To overcome this therapeutic challenge, a nanodelivery platform (~200 nm) through covalent conjugation of sulfated hyaluronan (S-HA) with branched polyethyleneimine (PEI) was developed. Upon loading with IFN-γ, the nanoplatform achieved significantly enhanced hepatic accumulation effect. The resulting S-HA-PEI-IFN-γ formulation significantly attenuated M1 type macrophage polarization and associated pro-inflammatory cytokine release induced by free IFN-γ treatment, the key contributors to systemic adverse effects. Mechanistically, the nanoparticle of S-HA-PEI within the formulation exhibited synergistic effect with IFN-γ to suppress hepatic stellate cell (HSC) activation by blocking TGF-β/Smads signaling pathway. In a CCl 4 -induced murine liver fibrosis model, S-HA-PEI-IFN-γ administration achieved remarkable reduction in collagen deposition as compared to free IFN-γ treatment, accompanied by concurrent downregulation of Collagen-I (Col I) and α-smooth muscle actin (α-SMA) expression. By integrating targeted delivery, toxicity mitigation and synergistic anti-fibrotic effect, the S-HA-PEI-IFN-γ nano-therapeutic represents a promising transformative strategy for combating liver fibrosis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2025
·
IF 14.3
Hao Li,Hao-Jie Yan,Hui-Song Hu,You-Lin Zhang,Qin-Hao Zhang,Xian-Ze Meng,Lian-Kui Wu,Fa-He Cao
Ultraviolet (UV) irradiation and coupled environmental degradation cause premature failure of marine coatings, thereby exacerbating metal corrosion processes. Developing coatings that integrate both weather resistance and durability remains a significant yet challenging endeavor. Herein, we report a multifunctional intelligent coating (GO-HHU-T-EP) through the triple synergistic incorporation of graphene oxide (GO), cerium-based metal-organic framework (HHU), and Tinuvin 1130 (T). The GO-HHU-T heterostructure is synthesized via a facile and sustainable strategy. Density functional theory (DFT) and molecular dynamics (MD) simulations reveal that the GO-HHU-T composite with excellent dispersibility significantly enhances the coating’s compactness. Given its UV absorption and radical scavenging mechanisms, GO-HHU-T-EP coating maintains structural integrity with 95.9% and 80.9% retention of tensile strength and interfacial adhesion after UV aging. Furthermore, GO-HHU-T-EP coating confirms outstanding corrosion resistance ( Z f =0.01Hz 6.4 × 10 9 Ω cm 2 ) after 100-day immersion in aggressive solutions, demonstrating a 37647.1 times improvement over EP coating. The intelligent heterostructure enables active protective properties for the GO-HHU-T-EP coating via environmental stimulus responsiveness. Projected density of states (PDOS) indicates that the adsorption mechanism originates from strong hybridization interactions between Fe and Ce/O atom orbitals. This work presents a promising design strategy for next-generation marine coatings that integrate anti-UV aging, mechanical enhancement, active protection, and long-term durability.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2025
·
IF 6.2
Zhiping Su,Mingrui Pan,Shizhen Qin,Zuli Zheng,Haiyan Xu,Shaobo Zhang,Liping Ning,Shanshan Jia
Traditional wood-plastic composites (WPCs) usually employed fossil-based non-degradable plastics as the polymer matrix, making WPCs poor in sustainability and degradability. Herein, a new kind of sustainable and degradable WPCs, wood-vitrimer composites (WVCs, i.e., WPs/Cel-DIP composite), was developed by integrating wood powders (WPs) into a cellulose-based dynamic imine polymer (Cel-DIP) matrix via heat-pressing formation technique. The resulting WVCs exhibited ultrahigh tensile strength (56.1 MPa), flexural strength (94.9 MPa), Young's modulus (2.5 GPa), and flexural modulus (10.3 GPa). The WVCs possessed extremely high thermostability with the glass-transition temperature ( T g ) of 230–250 °C and thermal degradation temperature ( T d ) of ˃ 300 °C. The WVCs also exhibited low water absorption ratio (as low as 2 wt%) and excellent water resistance. Moreover, such WVCs could be chemically degraded by depolymerized the dynamic imine crosslinking networks of Cel-DIP via acid-catalyzed hydrolysis. Such WVCs represent a kind of novel, sustainable, and environmentally friendly biomass-based composites.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Qiang Xian,Xingrui Tang,Shibing Zuo,Hao Li,Jun Wen
Using uranium solution and simulated seawater for screening and evaluating the performance of adsorbents is a conventional method in uranium extraction from seawater research. However, the performance of adsorbents in natural seawater may be inaccurately assessed due to the unscientific nature of current screening systems. Herein, the correlation between the uranium adsorption behavior of three typical chelating group-based adsorbents (Carboxyl-functionalized PE-COOH, amidoxime-functionalized PE-AO, phosphate-functionalized PE-AO-H 3 PO 4 ) and the composition of different solution systems was systematically investigated. It is found that the uranium adsorption performance is inconsistent in different solutions, and the adsorption capacity orders are PE-AO-H 3 PO 4 > PE-COOH > PE-AO in aqueous solution (U-NaHCO 3 ), PE-AO > PE-AO-H 3 PO 4 > PE-COOH in simulated seawater (U-NaCl-NaHCO 3 ), PE-AO > PE-COOH > PE-AO-H 3 PO 4 in natural seawater. In order to reveal the difference in the impact of different solutions, the effect of salt types and concentrations in seawater on uranium adsorption properties were further investigated. The results demonstrate that the high-concentration salts (including NaHCO 3 , NaCl, CaCl 2 and MgCl 2 ) in the seawater have significant impacts on uranium adsorption behavior, especially for carboxyl (COOH) and phosphate (H 3 PO 4 ) groups. Therefore, compared with usually used simulated seawater system (U-NaHCO 3 -NaCl), a novel and effective simulated seawater (U-NaHCO 3 -NaCl-CaCl 2 -MgCl 2 ) is proposed for accurately screening adsorbents. This work is of great significance for understanding the influence of salt ions in seawater on adsorption behavior and developing a more effective simulated seawater evaluation system for uranium extraction from seawater.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Hanfang Zhang,Junhao Dai,Banglong Shen,Donghui Zhang,Yanfang Wang,Bingbing Qiu,Huaqiang Chu
Mo-based catalysts have received widespread attention for their promising hydrogen evolution reaction (HER) efficiency. However, single Mo-based catalysts still have some shortcomings in terms of catalytic activity. Designing heterostructure is an effective strategy to optimize electron configuration, accelerate HER dynamics and modulate microstructure. Herein, a novel cross-linked sheet-like r-FeMo/NF (Fe 2 N/Mo 2 N/MoO 2 ) electrocatalyst with multiple heterostructures was prepared by a facile two-step method involving hydrothermal growth followed by nitridation, which directly formed the active material on nickel foam (NF). The formation of multiple heterostructures results in the redistribution of electrons between Fe and Mo species, promoting charge transfer and improving HER activity. As a result, the as-prepared r-FeMo/NF catalyst demands a low overpotential of 46.1 mV to drive the current density of 10 mA cm −2 for the HER in 1 M KOH. Moreover, it demonstrates outstanding long-term stability, maintaining excellent performance for 100 h at both 10 and 100 mA cm −2 . This work can provide valuable insights into designing highly efficient electrocatalysts with multiple heterostructures.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2025
·
IF 5.1
Hongyuan Zhao,Mengyuan Zhao,Xinya Xu,Yuyang Zhang,Zirong Li,Sridhar Komarneni
In this work, an ultrasensitive gallic acid (GA) electrochemical sensor was developed by using β-cyclodextrin-encapsulated and Ketjenblack carbon-embedded helical multi-walled carbon nanotubes (β-CD/HMCT/KC) networks, which were prepared by using ultrasound assisted one-pot strategy. β-CD not only achieved the good adsorption and enrichment of GA through host-guest inclusion interactions but also promoted the uniform dispersion of HMCT and KC. HMCT facilitated the rapid electron transport through continuous tube-wall bending pathways, and the unique helical morphology further increased the surface corrugation, significantly enhancing the density of active sites. KC with branched-chain morphology enabled the formation of branched-chain-like conductive carbon networks. The electrochemical performance of β-CD/HMCT/KC modified sensor was performed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The multifunctional integration of β-CD/HMCT/KC enhanced the sensitivity of GA electrochemical analysis (Limit of detection: 8.8 nM, limit of quantification: 29.33 nM, linear concentration range: 0.5–20 μM). The practical evaluation of GA detection in food samples (teas and fruit juices) showed good recoveries of 96.03–104.37 % and low relative standard deviations of 2.30 %–4.57 %.
✓ 已验证
产品关联
DOI
高影响因子