FUEL
·
2023
·
IF 7.4
Junnan Tao,Mingyuan Wang,Xiangzhao Zhang,Lei Lu,Hua Tang,Qinqin Liu,Shuangying Lei,Guanjun Qiao,Guiwu Liu
Energy band matching coupled with intimate interface in a heterojunction is the prerequisite for achieving the separation of photogenerated carriers. Herein, 0D CdS nanospheres were uniformly anchored in 3D flower-like CoAl layered double hydroxide (CoAl-LDH) spheres via a hydrothermal process. The unique porous structure and abundant hydrophilic groups can significantly promote the interactions between catalyst and solutions and thus facilitate the photocatalytic reaction. The appropriately staggered band structures can trigger the formation of S-scheme heterojunction, and the tight connection between the CdS and CoAl-LDH offers more charge transport channels, thereby accelerating the charge transfer. The optimized CdS/CoAl-LDH nanohybrid presents a photocatalytic hydrogen evolution of 6.19 mmol/g/h and tetracycline hydrochloride (TC) degradation efficiency of 92.2 % in 50 min. Moreover, the Cd 2+ ion concentration measured by ICP-OES verifies the alleviation of photocorrosion, and the DFT calculations further demonstrate the higher hydrophilia, lower H 2 absorption energy and stronger charge interactions of CdS/LDH hybrid. This work provides a feasible strategy to efficiently utilize the photoinduced carries by constructing a highly hydrophilic S-scheme heterojunction.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2022
·
IF 10.53
Xiaoping Wang,Yanling Liu,Kaiming Fan,Peng Cheng,Shengji Xia
Introducing nanomaterials into the polyamide layer of thin-film composite (TFC) membranes during interfacial polymerization process can customize the physicochemical properties of membranes and further enhance the membrane permeability without sacrificing selectivity. In this study, we prepared novel thin-film nanocomposite (TFN) nanofiltration membranes by varying the deposition density of hierarchical flower-like structured molybdenum disulfide (HF–MoS 2 ) with the assistance of vacuum filtration. Ascribed to the unique 3D hierarchical structure of HF–MoS 2 , a nano-sized striped polyamide film with a decreased thickness of 30–40 nm was formed, which increased the membrane effective filtration area and reduced the mass transfer resistance for water permeation. In addition, compared to the control TFC membrane, the TFN membranes possessed relatively looser polyamide layers with higher surface hydrophilicity and more negative surface charges. When the deposition density of HF–MoS 2 was 10 μg/cm 2 , the optimal performance of the TFN membranes was obtained, i.e., a water permeability of 18.4 L m −2 h −1 bar −1 and rejections above 98% for Na 2 SO 4 and MgSO 4 . Moreover, the optimal TFN membrane demonstrated an excellent separation performance and structure stability in the mixed salt solution and the long-term filtration test of 120 h, respectively. This work provides a novel approach to design high-performance TFN membranes applied for water/wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 47
·期 3
·1174-1185
·
IF 3.925
Xinyu Liu,Jing Xu,Jiandong Wu,Zhenlu Liu,Shengming Xu
In the process of photocatalysis, semiconductor materials generate photogenerated electrons and photogenerated holes when excited by sunlight, so as to participate in the process of photocatalytic decomposition of water to produce hydrogen. In this work, under the combined action of ultrasonic and electrostatic forces, two semiconductors are successfully coupled through electrostatic self-assembly to effectively avoid the serious phenomenon of sulfide photocorrosion. Through electrochemical and fluorescence characterization experiments, it is confirmed that ZnCo2O4/CdS can accelerate the generation and transmission rates of photogenerated carriers. ZnCo2O4/CdS greatly increased the activity of the catalyst under simulated sunlight irradiation. With good photocatalytic activity, the hydrogen yield reached 80.71 mmol g−1 within 5 hours, far superior to those of Co3O4/CdS and ZnO/CdS. The relative values of the work functions of ZnCo2O4(311) and CdS(110) were calculated by DFT. Combined with the position of the conduction band, it was concluded that a new S-scheme induced by an internal electric field was formed at the ZCO/CS-25% contact interface, thus improving the photocatalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2022
·
IF 3.662
Jianhua Lv,Yaru Fang,Mi Wu,Xiaoyu Ou,Wenchang Zhang,Shiyu Wang,Huaiguo Li,Lei Shang,Mingfeng He,Yan Zhao
Microsized β-chitin fibers were prepared, and PAAm /β-chitin composited hydrogels were synthesized by situ free radical polymerization . The morphology, mechanical properties, swelling ratio, transparency and drug release capabilities of the composited PAAm hydrogels were studied systematically. The results showed that the microsized β-chitin fibers were evenly dispersed in the PAAm hydrogels, and the tensile and compressive strength of PAAm hydrogels were increased by 2.1 folds and 4.4 folds respectively by adding with 15 phr microsized β-chitin fibers, while water absorbency and transparency of the hydrogels were decreased with higher microsized β-chitin fibers content. The drug release behaviors of diclofenac sodium in the hydrogel followed the Fickian diffusion mechanism with n value of 0.099 and 0.147 for PAAm hydrogels and PAAm/β-chitin composite hydrogels respectively, and the release time of 60 % drug were extended from 1 h to 5 h by the addition of 5 phr microsized β-chitin fibers. The results indicate that microsized β-chitin fibers can improve the mechanical properties and decrease the drug release rate of PAAm hydrogel, and the composited hydrogels may find potential applications in the field of transdermal drug delivery system.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2022
·
IF 5.895
Ruige Yang,Zhiyan Liu,Meiyue Han,Liping Cui,Yong Guo
To discover novel natural-product-based insecticide candidates, herein, a variety of osthole-derived N-benzoylthioureas were synthesized and assessed for their insecticidal activities against three insect pests. An insecticidal assay showed that most of the target osthole-derived N-benzoylthioureas displayed a more potent and broad-spectrum insecticidal effect than the parent osthole after the introduction of N-benzoylthioureas on the C-3′ position of osthole. Compound B24 displayed the most potent growth inhibitory (GI) effect on Mythimna separata Walker, with a final corrected mortality rate of 82.1% when treated with a concentration of 1 mg/mL, which was 1.64- and 1.53-fold higher in comparison to osthole and the botanical insecticide toosendanin, respectively. Compounds B22, B23, and B25 displayed a more promising aphicidal effect on Myzus persicae Sulzer, and their LD50 values were 0.015, 0.017, and 0.019 μg/larvae, respectively, superior to the commercially available insecticide rotenone (0.024 μg/larvae). Derivatives B19, B20, B23, and B25 displayed more potent larvicidal activity against Plutella xylostella Linnaeus, with LC50 values of 0.22, 0.26, 0.15, and 0.30 mg/mL, respectively, exceeding that of rotenone (0.37 mg/mL). Furthermore, both compounds B19 and B23 against P. xylostella were found to be more effective than rotenone in a control efficacy assay under greenhouse conditions. The structure–activity relationship (SAR) suggested that osthole-derived N-benzoylthioureas are more active in most cases when the R group is an electron-withdrawing group than when it is an electron-donating group, especially for halogenated groups. Additionally, the potent compounds B19 and B23 possessed good selectivity and were less toxic to non-target organisms. This study suggests that these osthole-derived N-benzoylthioureas could be further studied in depth as eco-friendly natural product pesticides in crop protection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Jingxue Wang,Yanting Liang,Zichen Wang,Bingjie Huo,Chao Liu,Xiaxia Chen,Hongwei Xu,Dongmei Li,Zhaoyou Zhu,Yinglong Wang,Fanqing Meng
Using water flow energy in the environment for water treatment is a feasible solution to alleviate energy shortages and environmental pollution. This work prepared a Cu 2 O@MoS 2 /PVDF modified pipeline with superior piezoelectric properties for norfloxacin (NOR) degradation. The piezoelectric coefficient d 33 of Cu 2 O@MoS 2 /PVDF increased by 27.7 % compared with PVDF. The piezoelectric current response test demonstrated that Cu 2 O@MoS 2 /PVDF had a higher current response than PVDF. FTIR showed that the presence of Cu 2 O@MoS 2 significantly increased the piezoelectric β -phase content of PVDF. The Cu 2 O@MoS 2 /PVDF pipeline exhibited the best degradation efficiency of 99.3 % within 40 min when the flow rate reached 1.389 L min −1 . O 2 – and OH have been shown to play an important role in NOR degradation and the possible degradation mechanism and pathways of NOR were proposed. This work provides a promising method for the efficient and green treatment of organic pollutants in water by using water flow energy and has practical application significance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Jing Wu,Jin Qu,Guang Yin,Tingting Zhang,Hao-Yu Zhao,Fan-Zhen Jiao,Ji Liu,Xiaofeng Li,Zhong-Zhen Yu
Although most solar steam generation devices are effective in desalinating seawater and purifying wastewaters with heavy metal ions , they are ineffective in degrading organic pollutants from wastewaters. Herein, we design novel solar-driven water purification devices by decoration of three-dimensional pinecones with MoS 2 nanoflowers via a one-step hydrothermal synthesis for generating clean water. The vertically arrayed channels in the central rachis and the unique helically arranged scales of the hydrothermal pinecone can not only transfer bulk water upward to the evaporation surface, but also absorb more solar light from different incident angles for solar-thermal evaporation and photodegradation of wastewaters under omnidirectional irradiations. The decorated MoS 2 nanoflowers can not only enhance the solar-thermal energy conversion efficiency, but also decompose organic pollutants in the bulk water by their photocatalytic degradation effects. The resultant hydrothermal pinecone with in situ decorated MoS 2 (HPM) evaporator exhibits a high evaporation rate of 1.85 kg m −2 h −1 under 1-sun irradiation with a high energy efficiency of 96 %. During the solar-driven water purification processes, the powdery HPM can also photodegrade organic pollutants of methylene blue and rhodamine B with high removal efficiencies of 96 % and 95 %, respectively. For practical demonstration, by floating in the methylene blue solution under 1-sun irradiation, the bulky HPM can generate clean water by simultaneous solar-thermal evaporation and photocatalytic degradation. The integration of solar steam generation and photocatalytic degradation mechanisms makes the HPM evaporator highly promising for practical high-yield purification of wastewaters.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2023
·
IF 4.1
Tong Chen,Shuya Wang,Xufang Zong,Bingxiang Li,Ye Shu,Xinyuan Di,Wanning Zhu,Guangsan Song,Jun Jiang
Periodic mesoporous organosilicas (PMO) hydrophilic microspheres were synthesized by co-condensation of sulfated polysaccharide from Lilum lancifolium Thunb. bridged silane (SLLTPBS) and polyhedral oligomeric silsesquioxane (POSS) as stationary phase (PMO(SLLTP-POSS)) for per aqueous liquid chromatography (PALC), which would overcome the disadvantages of using a large amount of acetonitrile on the hydrophilic interaction liquid chromatography (HILIC) columns. Average particle size of PMO (SLLTP-POSS) microspheres was 4.9 μm, which was suitable for stationary phase. The retention mechanism of the stationary phase in PALC was mainly hydrophobic interactions and also included some ion-exchange interactions and electrostatic interactions. The acid-base resistance was greatly improved compared to the C18 column. The PMO(SLLTP-POSS) column under PALC mode had increased the resolution when separating some hydrophilic compounds such as eight organic acids and eleven sweeteners compared with the C18 column and HILIC column. The new column was more efficient than the HILIC columns. Additionally, a PALC-triple quadrupole mass spectrometry approach for the simultaneous identification of the eleven sweeteners was developed. The averagere coveries of the eleven compounds were 70.20%–91.33% with the relative standard deviation (RSD) range of 1.74% to 4.27%. The results showed good precision and accuracy of the method.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2022
·
IF 5.895
Keyuan Pu,Jiamin Qiu,Yongqi Tong,Bolin Liu,Zibin Cheng,Siyu Chen,Wen-Xiu Ni,Yan Lin,Kwan-Ming Ng
The degradation of ingredients in heat-processed meat products makes their authentication challenging. In this study, protein profiles of raw beef, chicken, duck, pork, and binary simulated adulterated beef samples (chicken–beef, duck–beef, and pork–beef) and their heat-processed samples were obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Heat-stable characteristic proteins were found by screening the overlapping characteristic protein ion peaks of the raw and corresponding heat-processed samples, which were discovered by partial least-squares discriminant analysis. Based on the 36 heat-stable characteristic proteins, qualitative classification for the raw and heat-processed meats was achieved by extreme gradient boosting. Moreover, quantitative analysis via partial least squares regression was applied to determine the adulteration ratio of the simulated adulterated beef samples. The validity of the approach was confirmed by a blind test with the mean accuracy of 97.4%. The limit of detection and limit of quantification of this method were determined to be 5 and 8%, respectively, showing its practical aspect for the beef authentication.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Xingxing Yu,Yan Sun,Jieyu Hu,Junjie Wang,Xiumei Zhuang,Shenghao Zhang,Haiting Ren,Hongxing Qiu,Yueshou Zhang,Yongjun Hu
Surface-enhanced Raman scattering (SERS) is a promising method for rapid and sensitive detection of pesticide residues. Herein, a three-dimensional MoS2/Au/Ag nanostructure was developed by employing composite systems containing semiconductors, noble metal nanoparticles, and internal standard. The MoS2 nanoflowers provide abundant anchors for the loading of plasmonic nanoparticles so as to generate intense electromagnetic “hot spots,” and the Au-MBN/Ag nanostructures can increase the accuracy of SERS detection with the calibration ability of the internal standard molecules (4-mercaptobenzonitrile, 4-MBN). Therefore, the MoS2/Au/Ag nanostructures integrate the advantages of high-enhancement SERS substrates and high-accuracy ratiometric Raman detection. Moreover, the nanostructures were fabricated via a facile procedure and showed high sensitivity, accuracy, and reproducibility in SERS detection. The nanostructures also showed good linear fitting between the ratios of Raman intensity and logarithmic concentrations of analytes in ratiometric SERS analysis. In addition, thiabendazole (TBZ) in apple juice was successfully detected by using the as-prepared SERS substrates with a limit of detection down to 0.1 ppm in practical applications. To conclude, the MoS2/Au/Ag nanostructures showed excellent SERS activity in ratiometric analysis and the substrate is expected to have great potential for the quantitative detection of low-concentration pesticide residues.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2023
·
IF 10.9
Chunyu Yuan,Huijun Lv,Yujin Zhang,Qian Fei,Dongdong Xiao,Hongfei Yin,Zhen Lu,Yongzheng Zhang
Properly engineered heterojunction photocatalysts warrant a more effective way to facilitate the separation of photoexcited electron-hole pairs and consequently bolster the photocatalytic hydrogen evolution performance. Herein, 3D bicontinuous nanoporous reduced graphene oxide (np-rGO) is served as a free-standing supporting matrix for the anchorage of CdS nanoparticles to obtain the highly efficient photocatalysis system for hydrogen production . The bicontinuous internal ligament and open nanopores in 3D nanoporous heterojunction are conducive to multiple reflecting and scattering of the incident light, leading to improved light absorption and utilization capacity. Moreover, the construction of p-n heterojunction with staggered band alignment is achieved in CdS/np-rGO to accelerate the transport of photo-excited carriers. The constructed CdS/np-rGO p-n heterojunction achieves a corresponding hydrogen generation rate of 2171.23 μmol g −1 h −1 , which is 3.6 times in comparison with bare CdS. DFT calculations also indicate the preferable photocatalytic performance of CdS/np-rGO could be assigned to the ideal interfacial charge rearrangement on the heterointerface, which optimizes the H* adsorption kinetic energies and leads to a remarkable enhancement in the charge separation efficiency. It is anticipated this work could provide new sight for making the best usage of sunlight to produce solar fuel.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Jiuli Chang,Wenfang Liang,Fang Xu,Dapeng Wu,Kai Jiang,Gongke Wang,Zhiyong Gao
A negative electrode with high capacity and rate capability is essential to match the capacity of a positive electrode and maximize the overall charge storage performance of an aqueous alkali battery (AAB). Due to the 3-electron redox reactions within a wide negative potential range, bismuth (Bi)-based compounds are recognized as efficient negative electrode materials. Herein, hierarchically structured bismuth oxyformate (BiOCOOH) assembled by ultrathin nanosheets was prepared by a solvothermal reaction for application as negative material for AAB. Given the efficient ion diffusion channels and sufficient exposure of the inner surface area, as well as the pronounced 3-electron redox activity of Bi species, the BiOCOOH electrode offered a high specific capacity ( C s , 229 ± 4 mAh g −1 at 1 A g −1 ) and superior rate capability (198 ± 6 mAh g −1 at 10 A g −1 ) within 0 ∼ −1 V. When pairing with the Ni 3 S 2 -MoS 2 battery electrode, the AAB delivered a high energy density ( E cell , 217 mWh cm −2 at a power density ( P cell ) of 661 mW cm −2 ), showing the potential of such a novel BiOCOOH negative material in battery-type charge storage.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）