ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Di Zhang,Zhongju Ye,Lin Wei,Haibin Luo,Lehui Xiao
Photodynamic therapy (PDT) has attracted great attention as an alternative tumor treatment method. Unfortunately, it suffers from some limitations like poor targeting capability and insufficient therapeutic efficiency caused by tumor hypoxia. In this work, we introduce a novel O2-evolving PDT nanoparticle for homologous cancer cell targeting as well as dual-mode imaging [i.e., magnetic resonance imaging (MRI) and fluorescence imaging]. Specifically, the nanostructure consists of a MnO2 nanosheet-coated metal–organic framework core and cancer cell membrane shell (defined as CM-MMNPs). The MnO2 layer displays H+ and H2O2 responsiveness, which can produce O2 to enhance O2-mediated singlet oxygen (1O2) generation for PDT. Moreover, the resulted Mn2+ can also be used as an optimal MRI contrast agent. The introduction of cell membrane and membrane proteins endow the CM-MMNPs with good stability and integrity in the process of cellular endocytosis, as well as strong homologous cell-targeting ability. This multifunctional nanoparticle has the potential to overcome the hypoxia of cancer cells in PDT, and provides a new paradigm for tumor targeting, detection, and therapy, which is promising for biomedical applications in the future.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Fan Yang,Tian Qiu,Cheng Chi,Shuang Liang,Lei Deng,Xuyang Wang,Chunxia Wang,Jingyi Fu,Ying Wang,Yongfeng Li
Promotion of nitrogen-doped graphene (NG) by incorporation of ferric oxide (NG-Fe 2 O 3 ) is found to strongly enhance the activity in the catalytic oxidization of aldehyde to synthesize carboxylic acid with O 2 . The composite NG-Fe 2 O 3 catalysts can be fabricated by a facile one-pot hydrothermal method. The characterization results of the composite catalysts have revealed that the Fe 2 O 3 nanoparticles (NPs) with sizes of 40–90 nm are not only on both sides of NG sheets but also tightly enwrapped by the graphene layers. In comparison to NG and Fe 2 O 3 NPs, synergistic adsorption that confirmed by DFT studies has been created on the NG-Fe 2 O 3 composites, where both NG and Fe 2 O 3 are proposed to be involved in the adsorptive interaction. The synergistic adsorption can lead to strengthen O 2 molecule adsorption of NG and weaken O 2 molecule adsorption of Fe 2 O 3 NPs. More importantly, the NG-Fe 2 O 3 composite is found to considerably facilitate the longest elongation of O-O bonds and contribute to the striking enhancement of the catalytic performance. The highly active NG-Fe 2 O 3 composite shows wide scope for catalysis of oxidation of aldehydes to carboxylic acids and good stability for recycle six times.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Hongying Zhao,Lin Qian,Ying Chen,Qingning Wang,Guohua Zhao
The selective two-electron oxygen reduction reaction (ORR) for an onsite Fenton oxidation reaction over an integrated cathode is a promising method for environmental restoration. Here, an economic iron-copper-embedded carbon aerogel (FeCuC) exhibited high ORR activity (half-wave potential of −0.19 V vs SCE). The electron transfer number (n) over FeCuC was 2.9. Indeed, Fe@Fe 3 C promoted the ORR activity, while Cu enhanced the selectivity of the two-electron ORR. Meanwhile, the simultaneous incorporation of Fe and Cu simultaneously facilitated the sequential Fenton oxidation induced by H 2 O 2 . The individual rate constants for ORR and the oxidation reaction successfully revealed the fact that the efficient Fenton oxidation reaction again promotes again the 2-electron O 2 reduction pathway. The application of FeCuC as a cathode in the electro-Fenton (EF) process, involving both high ORR and high Fenton oxidation activities, exhibited efficient total organic carbon (TOC) removal (88–99%) in 240 min for dimethyl phthalate (DMP), imidacloprid (IMI), bisphenol A (BPA) and perfluorooctanoate (PFOA). Moreover, five types of sanitary sewage were successively treated to meet the national discharge standards (chemical oxygen demand (COD) < 50 mg L −1 ) with relatively low specific energy consumption (20–40 kW·h·(kg COD ) −1 ) using FeCuC in the heterogeneous EF process.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2015
·Vol. 19
·期 8
·2421-2429
·
IF 2.446
Wang Xiaofei,Cai Shengrong,Zhu Ding,Mu Shijia,Chen Yungui
A lithium (Li)–oxygen (O 2 ) battery based on an inorganic solid-state air cathode was fabricated, and the influence of water vapor (key component in the air) on the electrochemical behavior of the proposed Li–O 2 battery was deeply investigated. Excluding the negative influence of the corrosion of Li anode that existed in organic-based electrolyte Li–O 2 battery when operated in wet environment, our results showed that water vapor has a positive effect on the discharge and cycling performances of the Li–O 2 battery using a solid-state air cathode. The discharge capacity reached 11734 mA h g −1 (7.8 mA h cm −2 ) in wet O 2 , which was not markedly different with that in dry O 2 (11956 mA h g −1 (8.0 mA h cm −2 )). However, the discharge voltage in wet O 2 was about 110 mV higher than that in dry O 2 . Although the formation of LiOH increased the charge overpotential, the formed LiOH in turn minimized the decomposition of carbon to form Li 2 CO 3 , and enhanced the cycling performance to a certain extent. In addition, we showed that the polarization involved by water vapor could also be largely decreased by slightly increasing the operating temperature; the charge voltage plateau decreased from 4.04 to 3.3 V when the temperature increased from 25 to 50 °C. These results suggest that the Li–O 2 battery using a solid-state air cathode is promising for practical application, especially in wet environment.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2015
·
IF 2.288
Ming Song,Xihua Du,Yan Chen,Lei Zhang,Ding Zhu,Yungui Chen
Among all the factors that restrict the application of Li–air battery, large charging polarization, due to the poor bulk charge transport ability of discharge product Li 2 O 2 , comes first. In this paper, we adopt the method of controlling discharging temperature to reduce the charging polarization during the first cycle of Li 2 O 2 based on the fact that controlling discharging temperature can reduce Li 2 O 2 bulk charge transport path since finer Li 2 O 2 particles can be observed at higher temperature. The mechanism of reducing charging polarization simply through increasing the discharging test temperature has also been researched in this paper.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 56
·32325-32332
·
IF 2.936
Yuhan Zhu,Yu Pan,Wenjun Wang,Haibing Xu,Liqun Zhou,Xiaoguang Liu,Ling Li
The local crystal sites occupied by Eu3+ in Ca5(BO3)3F:1% Eu3+ phosphor were investigated experimentally and theoretically. Ca5(BO3)3F:1% Eu3+ was synthesized by high-temperature solid-state method in air. The crystal structure and optical properties of the phosphor were studied by X-ray powder diffraction and photoluminescence, respectively. Two different O2− → Eu3+ CT broad bands with the peaks at 266 and 283 nm in Ca5(BO3)3F:1% Eu3+ were detected, indicating the Eu3+ sites occupied Ca2 and Ca1, respectively. The different sharp f–f emission spectra under the excitation of 283 and 266 nm proved that there are two different local lattice environments around Eu3+ existing in Ca5(BO3)3F:1% Eu3+. Environmental factor he, the standard deviation of environmental factor (EFSD) and the bond energy were used to illustrate and explain the site occupancy mechanism of Eu3+ into the host lattice. By comparing the intensity ratios of 5D0 → 7F2 transition to the 5D0 → 7F1 transition, I(5D0/7F2)/I(5D0/7F1) of Eu3+ at Ca2 (7.381) was found to be 2.5 times stronger than that of Eu3+ at Ca1 site (2.933). was calculated to analyze the I(5D0/7F2)/I(5D0/7F1) value. On the basis of the bond valence model, a bond-energy method was used to study the occupancy of the Eu ion, which indicated that the preferential sites of Eu ion occupancy in the Ca5(BO3)3F are the Ca2 and Ca1 sites. All three theoretical calculation results are consistent with each other.
研究领域:
材料科学
·
固体化学
·
光学
·
晶体学
✓ 已验证
DOI
高影响因子
HIGH PERFORMANCE POLYMERS
·
2025
·
IF 1.6
Zhiqing Liang,Zhongying Liu,Xiuyuan Wei,Hui Wu,Chanjuan Liu,Xiaohua Huang
Bifunctionalized NH2-UiO-66-CF3 nanofillers were successfully prepared by grafting - CF3 on NH2-UiO-66 via aldehyde-amine condensation reaction and applied to the preparation of 6FDA-ODA/NH2-UiO-66-CF3 mixed matrix membranes (MMMs). The successful introduction of -NH2 and -CF3 groups was verified by FT-IR, XRD, and XPS characterization, and the integrity of the crystal structure was ensured. Due to the presence of hydrogen bonding, NH2-UiO-66-CF3 showed good interfacial compatibility with the polymer matrix. Due to the introduction of the - CF3 group, the MMMs exhibited excellent thermal stability (T10% > 500°C, Tg = 300°C–305°C), hydrophobicity (contact angle of 92.96–97.71), and mechanical properties (tensile strength of 74–85 MPa). The gas separation performance tests showed that the MMMs exhibited significantly improved gas permeability and selectivity compared to the pure 6FDA-ODA membranes, which was attributed to the fact that the -NH2 and -CF3 groups provided more adsorption sites for gases. In particular, the PI/NUF(10) MMMs showed the best performance, with permeabilities of 42.71, 9.22, and 92.79 Barrer for CO2, O2, and He, respectively, which were 248%, 213%, and 173% higher than those of the pure membranes. Meanwhile, the selectivities of CO2/N2, O2/N2 and He/N2 were improved by 37%, 24%, and 8%, respectively. Close to the Robeson upper limit, demonstrating excellent gas separation potential.
研究领域:
材料科学
·
化学工程
·
膜技术
·
气体分离
·
纳米技术
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2024
·
IF 7.7
Kang Li,Yue Gao,Zhongxin Dong,Huibo Zhang,Xudong Fan,Lei Xu,Jie Huang,Feng Teng,Haibo Fan,Jiaming Song,Chunmei Zhang,Xuexia He,Peng Hu
Photocatalytic degradation is an effective technology for degrading water pollution that plays a significant role in environmental remediation. Ternary 2D ternary V-VI-VIIA semiconductors are ideal candidates for photocatalytic degradation of pollutants due to effective light absorption and high charge carrier mobility. In this work, high-quality SbSeI crystals were prepared using the chemical vapor transport (CVT) method and their photocatalytic degradation performance for multiple pollutants was studied. SbSeI exhibits excellent photocatalytic performance in the degradation of potassium dichromate (Cr (VI)), rhodamine B (RhB), tetracycline hydrochloride (TC-HCl) and methyl orange (MO). More than 98% of Cr (VI) and RhB can be removed after irradiation with an Xe lamp for 10 min and 40 min, respectively. The capture experiments and electron spin resonance results indicated that · O 2 − plays a major role in reducing Cr (VI), while h + plays a primary role in the degradation of MO, RhB and TC-HCl. Interestingly, the degradation rate of Cr (VI) is 1.3 times higher than that of a single pollutant system, and the degradation rate of RhB is 1.6 times higher, due to the enhanced separation and utilization of holes and electrons. The results demonstrate that SbSeI is a potential photocatalytic degradation material.
研究领域:
环境科学
·
材料科学
·
化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2024
·
IF 6.5
Yuxi Meng,Shaomian Liu,Yixi Wang,Wenqing Xu,Jiajian Gao,Sansan Yu,Fabing Su,Tingyu Zhu
Selective catalytic reduction of NO using CO (CO-SCR) is a promising technology for the purification of NO in the flue gas. However, the presence of O 2 significantly inhibits the activity of the CO-SCR catalyst. Herein, we synthesize a hollow Mn-doped CeO 2 @Co 3 O 4 catalyst (Mn-CeO 2 @Co 3 O 4 ), which achieved 82% NO conversion, 100% CO conversion, and 78% N 2 selectivity under 5 vol% O 2 at 200 °C, superior to those of CeO 2 @Co 3 O 4 and Co 3 O 4 @CeO 2 catalysts. The characterization results indicate that the strong electronic interaction at the heterointerfaces between Co 3 O 4 and CeO 2 plays a crucial role in promoting selective adsorption of NO. Furthermore, the Mn doping into the Co 3 O 4 lattice of the catalyst facilitates the conversion of N 2 O intermediates, thereby enhancing the overall activity. This research provides a new strategy for the design and synthesis of CO-SCR catalysts.
研究领域:
催化
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Communications Chemistry
·
2025
·Vol. 8
·期 1
·389
·
IF 6.2
Han Lei,Tan Jingying,Zhang Yucui
Given the promising prospect of nanozymes in colorimetric test strips, it is essential to eliminate the interferences of their multi-activities and various colors on the test strip. Here, white Mn-based metal-organic frameworks (Mn-MOFs) with ultrathin 2D morphology (3 nm thick) were successfully synthesized by a simple ultrasonic approach. The origin of the white optical property in Mn-MOFs was systematically investigated, revealing that it stems from specific metal-ligand coordination polymerization rather than morphological features or defect states. Mn-MOF nanozymes possessed exclusive peroxidase-mimicking activity rather than oxidase-like activity, effectively resisting O 2 interference during colorimetric assay. Moreover, Mn-MOF nanozymes displayed unique substrate selectivity without additional modification. Unlike other colored nanozymes, the whiteness of Mn-MOF nanozymes enhanced the paper’s whiteness, boosting contrast for colorimetric detection on test strip. This study pioneers a systematic investigation into the origin of whiteness in MOF nanozymes. The coordination-defined properties enable interference-free optical design and O 2 -resistant on-site detection.
研究领域:
材料科学
·
纳米技术
·
分析化学
·
生物传感器
·
酶模拟
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2025
·Vol. 60
·期 48
·25148-25163
·
IF 3.9
Zhang Zhenyan,Chai Huan,Yu Zhengqian,Li Jinsheng,Li Pengfei,Wu Lei,Li Zhanshuai,Qi Xiwei
TiO 2 -based materials are widely used in high-temperature capacitors and aerospace electronics but face challenges such as high dielectric loss and limited thermal stability in conventional single-component systems. To address these issues, we propose a novel strategy integrating high-entropy doping design and oxygen vacancy engineering. In 2 O 3 -doped (GeMnTiSnMo)O 2 high-entropy ceramics (GMTSMO- x In, x = 0.1–1) were synthesized via solid-state reaction. Experimental results reveal that In 3+ doping generates high-density oxygen vacancies (V o ·· ) through charge compensation, forming [Ti 3+ - V o ·· -Ti 3+ ] and [Mn 3+ - V o ·· -Mn 3+ ] defect-dipole clusters. These clusters enhance electron localization and suppress carrier migration, reducing dielectric loss by threefold. Simultaneously, oxygen vacancy enrichment strengthens interfacial polarization, increasing the dielectric constant by fourfold. The optimal GMTSMO-0.5In exhibits a relative permittivity ( ε r ) of 4.0 × 10 6 and a low loss tangent of 15 at 650 ℃/100 Hz, outperforming traditional TiO 2 -based materials and existing high-entropy oxides. All compositions demonstrate excellent temperature stability (25–400 ℃) and frequency-independent behavior above 10 4 Hz. This work provides a high-entropy-driven approach for dynamic defect engineering, paving the way for advanced dielectric materials in extreme-condition energy storage systems.
研究领域:
材料科学
·
陶瓷与介电材料
·
电子材料
·
储能技术
·
缺陷化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2025
·
IF 7
Jiale Han,Guofan Wang,Xu Hu,Jinlin Li,Zhaojun Xie,Zhen Zhou
Rechargeable lithium oxygen (Li–O2) batteries are regarded as promising candidates for future energy storage systems due to their exceptionally high theoretical energy density. However, their practical implementation faces major obstacles, including high charge and discharge overpotentials and a semiopen battery structure that is highly sensitive to humidity. These factors lead to reduced efficiency and poor stability in moist air, significantly limiting real-world application. To address these challenges, a composite photoelectrode was developed by directly growing tungsten trioxide (WO3) nanoribbons on carbon paper (CP), followed by the uniform deposition of platinum nanoparticles using atomic layer deposition. Compared to WO3 photoelectrode, the resulting Pt–WO3 photoelectrode enables stable operation of photoassisted Li–O2 batteries under humid oxygen atmosphere. The batteries sustain stable operation for over 100 cycles without failure at current densities of 0.05 and 0.2 mA cm–2. Advanced characterization and theoretical calculations confirm the formation of an ohmic contact between platinum and tungsten trioxide, which promotes the separation of photogenerated electrons and holes, improves charge transfer, and facilitates the reversible formation and decomposition of lithium hydroxide (LiOH). This strategy effectively overcomes critical barriers faced by conventional Li–O2 batteries in real-world environments and provides a promising direction for the design of environmentally tolerant and photoelectrochemically efficient energy storage systems.
研究领域:
能源材料
·
电化学
·
纳米材料
·
光电化学系统
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）