文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2761至2772个,产品总数2,786个

切换升序
ZnO
ACS Applied Nano Materials · 2024 · IF 5.3

Oxygen-Vacancy-Containing ZnO Nanoparticles for the Catalytic Cleavage of Dimethyl Methylcyclohexyl-2,4-Dicarbamate to the Corresponding Diisocyanate: Implication for the Preparation of Phosgene-Free Polyurethanes

Shutong Pang,Hualiang An,Guirong Wang,Xinqiang Zhao,Yanji Wang

Methylcyclohexyl-2,4-diisocyanate (HTDI) is an upgraded product of toluene-2,4-diisocyanate. HTDI-derived polyurethane products show excellent properties such as nonyellowing degeneration, light stability, and weather resistance. The cleavage of dimethyl methylcyclohexyl-2,4-dicarbamate (HTDC) is a crucial step for phosgene-free synthesis of HTDI. In this work, the catalytic performance of ZnO nanoparticles (NPs) with different particle sizes was evaluated for the cleavage of HTDC, and the result showed that the selectivity of HTDI up to 81.3% was achieved with a 94.2% conversion of HTDC over a 19.1 nm ZnO catalyst. It was found from the results of experiments and characterizations that the decrease in ZnO NPs particle size led to the following circumstances: (1) the specific surface area increased, (2) the crystal preferred orientation shifted from the (100) plane to the (002) plane, and (3) the oxygen vacancy concentration increased. The first-principles calculation results showed that two electrons left from the formation of an oxygen vacancy on the ZnO surface could transfer to the neighboring Zn site. Thus, the electron-withdrawing ability of the Zn site is changed and the structure of the ZnO surface is rearranged, which facilitates the inhibition of side reactions. Therefore, changing the concentration of oxygen vacancies and then adjusting the electron-withdrawing ability of Zn sites on the ZnO surface are an effective way to achieve highly selective synthesis of HTDI by the cleavage of HTDC.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2013 · IF 5.825

Size effect induced activity enhancement and anti-photocorrosion of reduced graphene oxide/ZnO composites for degradation of organic dyes and reduction of Cr(VI) in water

Yanhui Zhang,Zhang Chen,Siqi Liu,Yi-Jun Xu

The composites of reduced graphene oxide/ZnO (RGO/ZnO) with different particles size of ZnO have been prepared via a facile solvothermal reaction of graphene oxide (GO) and ZnO in an ethanol-water solvent. It is found that the RGO/ZnO-S1 composite with ZnO particle size of 20–100   nm exhibits the enhanced photoactivity toward degradation of organic dyes and reduction of heavy metal ions Cr(VI) in water as compared to the bare ZnO-S1 sample under UV light irradiation. However, the RGO/ZnO-S2 composite with ZnO particle size of 50–500   nm shows decreased photoactivity as compared to bare ZnO-S2. The recycled photoactivity testing shows that, for RGO/ZnO-S1, the photocorrosion of ZnO-S1 is efficiently inhibited by the hybridization with RGO whereas the case is not for RGO/ZnO-S2. A collection of characterization techniques disclose that the smaller particles size for RGO/ZnO-S1 than that for RGO/ZnO-S2 leads to a more interfacial contact and a chemical bonding between RGO and ZnO-S1, thereby resulting in enhanced photoactivity and efficient anti-photocorrosion as observed for RGO/ZnO-S1. Furthermore, the possible reaction mechanism for degradation of dyes and reduction of Cr(VI) over RGO/ZnO-S1 has also been studied. Our results suggest that the semiconductor particles size has an important effect on the photocatalytic performance of RGO/semiconductor composites photocatalysts. The hybridization of RGO with ZnO in an appropriate manner is able to significantly inhibit the well-known photocorrosion of semiconductor ZnO. It is anticipated that this work would enrich the applications of RGO/semiconductor photocatalysts in environment purification.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2026 · IF 5.1

In-doped ZnO nanofibers with Acharia stimulea-inspired morphology: a promising sensing platform for highly rapid and sensitive detection of the Listeria biomarker 3-hydroxy-2-butanone

Jing-Wen Liu,Gang-Long Song,Xiao-Xue Lian,Zhuang-Zhuang Qu,Yan Li

Rapid and sensitive detection of Listeria monocytogenes, a hazardous foodborne pathogen, is still a great challenge in food safety monitoring. Herein, we report the design and fabrication of Acharia stimulea-like In-doped ZnO nanofibers via a simple electrospinning-calcination process for highly sensitive sensing towards 3-hydroxy-2-butanone (3H-2B), a key biomarker produced by Listeria monocytogenes. Synergetic combination of In-doping and morphological engineering greatly enhances the gas-sensing performance. In-doping creates abundant oxygen vacancies and free carriers whereas the unique nanofiber structure ensures maximum exposure of active sites and fast gas diffusion. The optimized 3% In–ZnO sensor exhibits an exceptional response of 830 toward 100 ppm 3H-2B at 170 °C, with an ultra-fast response/recovery time of 1/5 s and a low detection limit of 26.2 ppb. The grain size of the 3% In–ZnO sample is tuned close to twice the Debye length, enabling full electron depletion and optimal sensing behavior. More importantly, a multi-parameter intelligent sensing system is designed for real-time and on-site 3H-2B detection. This study not only establishes In-doped ZnO nanofibers as a superior sensing platform for Listeria but also opens a new avenue for the detection of foodborne pathogens.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Water · 2026 ·Vol. 18 ·期 6 · IF 3.5

Enhancing Stable Electricity Generation and Assimilative Ammonium-N Removal in Photosynthetic Algae–Microbial Fuel Cells Using a Chlorella Biofilm-Loaded ZnO-NiO@rGO Carbon-Fiber Composite Cathode

Haiquan Zhan,Hong Wang,Yanzeng Li,Shiyu Liu,Shijie Yuan,Xiaohu Dai

Photosynthetic algae–microbial fuel cells (PAMFCs) are attractive for energy-positive wastewater treatment and carbon mitigation. However, PAMFC performance under continuous flow is often constrained by limited cathodic electron-acceptor supply and unstable photosynthetic biofilms, while the extent to which cathode interfacial engineering can stabilize diurnal power output and assimilative NH4+–N removal remains unclear. In this study, the sponge-like and petal-like ZnO0.2-NiO@rGO-modified carbon fibers (ZnO0.2-NiO@rGO-pCFs and ZnO0.2-NiO@rGO-pCFp) and pre-fabricated carbon felt (pCF) were used as cathode materials to construct three sets of PAMFC systems. Under light–dark cycling, the engineered cathodes reached steady operation within about 6.5 d and increased the steady-state voltage to approximately 0.35 V, compared with approximately 0.08 V for pCF. Under continuous-flow conditions, cathodic NH4+–N removal exhibited a stable diurnal rhythm, with higher removal during illumination at about 43–51% than in the dark at about 29–30%, consistent with algal assimilation as the primary nitrogen sink, while cathode modification mainly improved the cathodic microenvironment and response stability. Compared with pCF, the ZnO0.2–NiO@rGO cathode enriched a more even, Chlorophyta-dominated algal biofilm with an approximate relative abundance of 80%, indicating that its selective interfacial environment favors biofilm stabilization and sustains in situ oxygen production and cathodic electron-acceptor supply. Consequently, the composite cathode enhanced voltage output and stabilized light-enhanced, assimilative NH4+–N removal under aeration-free operation, while establishing an interpretable link between electrochemical performance and 18S rDNA-derived community assembly features, thereby providing a low-cost cathode design basis for nitrogen removal in wastewater treatment.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL POLLUTION · 2023 · IF 8.9

Optimized fabrication of Cu-doped ZnO/calcined CoFe‒LDH composite for efficient degradation of bisphenol a through synergistic visible-light photocatalysis and persulfate activation: Performance and mechanisms

Jyunhong Shen,Antong Shi,Jiahui Lu,Xiangtao Lu,Hongyu Zhang,Zhuwu Jiang

A novel magnetically separable Cu/ZnO/CoFe‒CLDH composite, whose synthesis was optimized using the Taguchi approach, was optimally synthesized by hydrothermally coupling Cu-doped ZnO and calcined CoFe–LDH. The synthesized Cu/ZnO/CoFe‒CLDH was applied to construct a synergistic process of integrating visible-light photocatalysis (VPC) with persulfate activation (PSA) and to degrade bisphenol A (BPA). Various characterizations proved that Cu/ZnO/CoFe‒CLDH possessed excellent physicochemical, optoelectronic and magnetic properties, thereby enhancing the catalytic performance. The Cu/ZnO/CoFe‒CLDH composite achieved highly efficient BPA degradation during the synergistic VPC‒PSA process, and its reaction rate constant (0.74 h −1 ) was 6.17-, 4.11-, and 2.85-fold higher than that of Cu/ZnO, CoFe‒CLDH, and Cu/ZnO/CoFe‒CLDH (VPC only), respectively. Moreover, the effects of the catalyst dosage, initial pollutant concentration , solution pH, persulfate dosage and coexisting ions on BPA degradation were comprehensively investigated. Radical-trapping experiments revealed that the contributions of ·OH, SO 4 · ‒ , ·O 2 − , and 1 O 2 involved in BPA degradation. Based on the intermediates identified by LC/MS, the main BPA degradation pathways were determined, the overall trend of which reflects a decreasing ecotoxicity. This study verified the effectiveness of the synergistic VPC‒PSA process with Cu/ZnO/CoFe‒CLDH, which could be used as a new reference for removing organic micropollutants from water.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2023 · IF 6.2

Construction of Bi12O17Cl2/ZnO-CN Z-scheme photocatalyst with ZIF-8 as precursor to remove antibiotics and Cr(VI) under visible light: Optimization, mechanism and degradation path

Pengfei Zhu,Xiaolong Wu,Xingyang Xiao,Ming Duan,Dan Luo,Jinru Lin

In this work, Bi 12 O 17 Cl 2 and ZIF-8 were synthesized via a facile in-situ precipitation method, while ZnO-CN was obtained through the pyrolysis of ZIF-8. Then, a novel Bi 12 O 17 Cl 2 /ZnO-CN composite catalyst with Z-scheme heterojunction was prepared by mechanical mixing-low temperature activation method. When the ZnO-CN is pyrolyzed at 550 ℃ and accounts for 10 wt% in the Bi 12 O 17 Cl 2 /ZnO-CN composite, the composite exhibited a significantly higher degradation rate for levofloxacin hydrochloride (LVX) (94.50%) compared to Bi 12 O 17 Cl 2 (67.30%) and ZnO-CN (36.80%), while also achieving a high removal rate of Cr(VI) under acidic conditions (92.00%). And the toxicity of LVX to wheat decreased significantly after photocatalytic degradation. Meanwhile, the Bi 12 O 17 Cl 2 /ZnO-CN has good universality, salt resistance and reuse stability. The experimental results of sample characterization show that the improved photocatalytic performance of Bi 12 O 17 Cl 2 /ZnO-CN composite can be attributed to the high-efficiency separation of electron-hole pairs (e - -h + ), enhanced light absorption in the visible region, increased specific surface area and active sites. Both the free radical capture experiment and electron paramagnetic resonance (EPR) test indicate that •O 2 - and h + are the primary active species in the process of degrading LVX by Bi 12 O 17 Cl 2 /ZnO-CN. Combined with mechanism exploration experiment and iquid chromatography-mass spectrometry (LC-MS) analysis, a possible direct Z-scheme heterojunction electron transfer mechanism and photocatalytic degradation pathways for LVX was proposed. This work enhances the photocatalytic performance of Bi 12 O 17 Cl 2 and provides an idea for antibiotic or Cr(VI) wastewater treatment.

CAS / MDL: 64-75-5 79-57-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2021 ·Vol. 11 ·期 56 ·35644-35652 · IF 3.361

A one-step hydrothermal route to fabricate a ZnO nanorod/3D graphene aerogel-sensitized structure with enhanced photoelectrochemistry performance and self-powered photoelectrochemical biosensing of parathion-methyl

Yuting Yan,Qian Li,Qirui Wang,Hanping Mao

Developing a new functional sensitized structure for improving the inherent property of photoactive materials and selecting an efficient electron donor as a photoelectrochemical (PEC) signal amplification strategy are crucial for achieving excellent PEC biosensors. Herein, we present a facile one-pot hydrothermal strategy for fabricating ZnO nanorod-decorated 3D graphene aerogels (ZnO/GAs). In this nanoarchitecture, GAs act as a new generation enhanced carrier, which can effectively improve the photoactivity of ZnO under visible light by enhancing the interfacial charge transfer. In addition, the as-prepared ZnO/GA nanocomposites exhibited two times higher photocurrent intensity than that of ZnO/graphene. Furthermore, we developed a novel self-powered PEC biosensor based on a ZnO/GAs sensitized structure with the amplification of enzymolysis products for the detection of parathion-methyl. Thiocholin, as a sacrificial electron donor, which is produced from the hydrolysis of acetylthiocholine catalyzed by acetylcholinesterase (AChE), can further significantly improve the photocurrent. Then, the inhibition of AChE activity by parathion-methyl prevented the production of thiocholine, resulting in an obvious decrease in photocurrents. Based on the above results, we fabricated an AChE-based self-powered PEC biosensor for the sensitive and selective determination of parathion-methyl with a linear range of 0.1 ng mL−1 to 0.1 μg mL−1 and a detection limit of 0.03 ng mL−1 (S/N = 3). This PEC biosensing strategy not only gives insights into using GAs as a novel sensibilizer to improve the PEC nature of semiconductors but also provides a promising flexible platform for organophosphorus pesticide detection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2023 · IF 8.8

An ultra-sensitive electrochemical sensing platform based on nanoflower-like Au/ZnO array on carbon cloth for the rapid detection of the nitrite residues in food samples

Chao Duan,Guo Chen,Zhiling Wang,Hao Li,Zhaoyang Zhang,Yiping Liu,Ming Lu

In this work, we constructed an enhanced electrochemical signal sensing platform using Au/ZnO nanoflake arrays coated on carbon cloth for the rapid detection of nitrite in food. Based on a stepwise synthesis strategy of electrodeposition and magnetron sputtering technique, AuNPs were sputtered onto ZnO nanoflower-like array sheets. Combining the high catalytic performance of AuNPs with the morphology of ZnO significantly increased the surface area and electrocatalytic activity of the electrodes. The prepared sensor showed a linear response range of 0.2–4986 μΜ, a limit of detection of 0.09 μM, and a high sensitivity of 5677 μA mM −1 cm −2 . It is worth noting that the sensor can precisely detect nitrite in the presence of interfering substances and has excellent stability and reproducibility. In addition, the nitrite residues in several food samples were analyzed using this method and spectrophotometric method, and the results of the two methods were not significantly different.

CAS / MDL: 80-41-1 10196-18-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Physical Chemistry C · 2018 · IF 4.484

Insight into the Transfer Mechanisms of Photogenerated Carriers for Heterojunction Photocatalysts with the Analogous Positions of Valence Band and Conduction Band: A Case Study of ZnO/TiO2

Wenting Sun,Sugang Meng,Sujuan Zhang,Xiuzhen Zheng,Xiangju Ye,Xianliang Fu,Shifu Chen

In the paper, the synthesis of ZnO/TiO2 nanocomposites with different main parts (TiO2 or ZnO) is studied. When TiO2 is the main part of the ZnO/TiO2 heterojunction photocatalysts (ZnO/TiO2), the photocatalytic activity is decreased rapidly with the increase of the amount of ZnO. The reason may be attributed to the relative p–n junction (p-ZnO/n-TiO2) produced between ZnO and TiO2. The migration directions of the electrons and holes in the relative p–n junction are opposite to the transfer directions of the photogenerated electrons and holes in the valence band (VB) and conduction band (CB). However, when ZnO is the primary part of the heterojunction photocatalysts (TiO2/ZnO), the photocatalytic activity of the samples increases with the increase of the TiO2 amount up to 5% (95% ZnO/TiO2). The reason may be that the migration directions of the electrons and holes in the relative p–n junction (p-TiO2/n-ZnO) are the same as the transfer directions of the photoexcited electrons and holes in VB and CB between the two semiconductors. It is proposed that the conductivity of the heterojunction photocatalyst will be changed with the difference of content for the two semiconductors, which in turn affects the migration directions of the electrons and holes in the heterojunctions and their photocatalytic activity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY · 2024 · IF 11.2

Enhanced photodynamic therapy efficacy of Ni-doped/oxygen vacancy double-defect Ni-ZnO@C photosensitizer in bacteria-infected wounds based on ROS damage and ATP synthesis inhibition

Rui Zhang,Zhiling Chen,Yi Li,Delun Chen,Tao Wang,Bingrong Wang,Qionglin Zhou,Shaowen Cheng,Dan Xu,Xiaohong Wang,Lina Niu,Jinchun Tu,Qiang Wu

The use of zinc oxide (ZnO) photosensitizers (PSs)-mediated photodynamic therapy (PDT) against bacterial wound infections is greatly restricted by diminished photocatalytic efficiency caused by the rapid recombination of photogenerated electrons and holes. In this work, ZnO PSs with a Ni-doped/oxygen vacancy and a protective carbon shell were successfully synthesized by calcinating a Ni-doping zeolitic imidazolate framework-8 precursor. The double-defect structure and the carbon-based substrates significantly promoted the efficiency of photogenerated electron–hole pair separation, meanwhile, the optimal proportion of 3% Ni doping endows it with the best photocatalytic performance as elucidated by photodegradation assays of methylene blue (MB) and density functional theory (DFT) calculations, reinforcing the generation of reactive oxygen species (ROS) by ZnO and showing obvious advantages in antibacterial properties. As the ROS damage that facilitates the photogenerated electron transfer underwent localized accumulation, the PSs disturbed the bacterial membrane integrity and caused bacterial ATP synthesis inhibition, further leading to bacterial lysis and promoting bacterial deaths. Additionally, the PSs showed outstanding efficacy in eradicating bacterial biofilms. Simultaneously, the significantly enhanced PDT antibacterial performance of the PSs in vivo could initiate wound tissue repair and trigger anti-inflammatory reactions by significantly regulating the expression levels of regeneration- and inflammation-related genes or proteins. Furthermore, the PSs consistently exhibited favorable compatibility both in vitro and in vivo . In summary, this study offers evidence of the remarkably efficient and biologically safe performance of Ni-ZnO@C PSs, with antibacterial properties advancing wound healing, both in controlled laboratory environments and living organisms, further underscoring their substantial potential for biomedical applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TRANSACTIONS OF TIANJIN UNIVERSITY · 2018 ·Vol. 24 ·期 3 ·201-211 · IF 0

In Situ Growth of 3D Hierarchical ZnO@Ni x Co1−x(OH) y Core/Shell Nanowire/Nanosheet Arrays on Ni Foam for High-Performance Aqueous Hybrid Supercapacitors

Wang Fumin,Liu Mengchao,Zhang Xubin,Lv Guojun,Sun Mingshuai

In this study, we designed and synthesized a novel battery-type electrode featuring three-dimensional (3D) hierarchical ZnO@Ni x Co 1− x (OH) y core/shell nanowire/nanosheet arrays arranged on Ni foam substrate via a two-step protocol including a wet chemical process followed by electro-deposition. We then characterized its composition, structure and surface morphology by X-ray diffraction, energy-dispersive X-ray spectrometry (EDS), X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy, EDS elemental mapping. Our electrochemical measurements show that the ZnO@Ni 0.67 Co 0.33 (OH) y electrode material exhibited a noticeably high specific capacity of as much as 255 (mA·h)/g at 1 A/g. Additionally, it demonstrated a superior rate capability, as well as an excellent cycling stability with 81.6% capacity retention over 2000 cycles at 5 A/g. This sample delivered a high energy density of 64 W·h/kg and a power density of 250 W/kg at a current density of 1 A/g. With such remarkable electrochemical properties, we expect the 3D hierarchical hybrid electrode material presented in this work to have promising applications for the next generation of energy storage systems.

✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2016 ·Vol. 4 ·期 26 ·10282-10293 · IF 8.262

All-solid-state asymmetric supercapacitors based on ZnO quantum dots/carbon/CNT and porous N-doped carbon/CNT electrodes derived from a single ZIF-8/CNT template

Yidong Zhang,Baoping Lin,Junchuan Wang,Jiahui Tian,Ying Sun,Xueqin Zhang,Hong Yang

Currently, the development of two kinds of materials from a single precursor has been an important frontier in material synthesis. In this study, we have successfully fabricated a single precursor using metal–organic frameworks (MOFs) (zeolitic imidazolate framework, ZIF-8) and carbon nanotubes (CNTs). ZnO quantum dots (QDs)/carbon/CNTs and porous N-doped carbon/CNTs have been selectively synthesized from a single ZIF-8/CNTs template. When the two derived materials were used for supercapacitor electrodes, they showed high capacitance values (185 F g−1 g for ZnO QDs/carbon/CNTs at 0.5 A g−1 and 250 F g−1 g for porous N-doped carbon/CNTs at 1 A g−1, respectively). Further, an all-solid-state asymmetric supercapacitor (ASC) device using ZnO QDs/carbon/CNTs as the positive electrode and porous N-doped carbon/CNTs as the negative electrode was fabricated, and this device could reach a working potential of 1.7 V, delivering a maximum energy density of 23.6 W h kg−1 and a maximum power density of 16.9 kW kg−1, which are better than those of the ZnO-based symmetric or asymmetric supercapacitor devices.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。