NEW JOURNAL OF CHEMISTRY
·
2019
·Vol. 43
·期 11
·4640-4647
·
IF 3.069
Wei-Song Gao,Jin-Miao Wang,Ning-Ning Shi,Chang-Neng Chen,Yu-Hua Fan,Mei Wang
To mimic the strategy used by natural photosynthesis in Photosystem II, which adopts the cubic Mn4CaO5 cluster as a natural oxygen-evolving complex, a bio-inspired cubane-like tetranuclear cluster [Cu4(pdmH)4(OAc)2](NO3)2·3H2O (1) has been synthesized successfully with pyridine-2, 6-dimethanol as the ideal ligand, and investigated by X-ray crystallography, PXRD, in situ UV-vis-NIR spectroelectrochemical analysis, and magneto- and electrochemistry. By X-ray analysis, it is shown that the distorted cubane-like core Cu4(μ3-O)4 is composed of four CuII and four μ3-O which arrange at the vertices of a slightly distorted cube. Electrochemical studies indicate that complex 1 presents potential properties as an effective molecular catalyst for electrocatalytic water oxidation under aqueous alkaline conditions at a potential of ∼1.20 V vs. NHE with a relatively low overpotential of ∼400–665 mV vs. NHE, which may result from the unique covalent metal–oxo bonding. Magnetic susceptibility measurements reveal that complex 1 displays overall antiferromagnetic exchanges between the Cu(II) ions within the clusters. Temperature dependence of in-phase (χM′) ac susceptibility signals display frequency-dependence, whereas the out-of-phase (χM′′) signals show no significant frequency-dependence for complex 1, which indicates that the complex may not be a SMM.
✓ 已验证
DOI
高影响因子
Journal of Energy Storage
·
2023
·
IF 9.4
Xuexian Wu,Shujing Chen,Danni Liu,Chunyi Ye,Fengzhan Si,Yan Zhang,Yang Yang,Jing-Li Luo,Xian-Zhu Fu
The current collector is a critical component of lithium-ion batteries (LIBs). Herein, copper-coated polymer films (P@Cu) with through-hole arrays are developed lightweight and flexible current collectors. The through-hole arrays are created by laser drilling the polyimide film substrate. P@Cu composite current collectors are fabricated by electroless Cu deposition on polyimide films with through-hole arrays, which form three-dimensional conductive paths . As the anode current collector for LIBs, P@Cu exhibit a total electrode mass-specific capacity that is 54.58 % higher than that of the commercial Cu foil. Due to the polyimide substrate, the tensile deformation of P@Cu is 6.69 % higher than that of the commercial Cu foil. After 30,000 bending cycles, the conductivity of P@Cu is only reduced by 3.39 %, while the commercial Cu foil current collectors have broken by this point. The P@Cu composite foils with through-hole arrays are high-performance lightweight and flexible current collectors for LIBs.
✓ 已验证
DOI
高影响因子
ACS Applied Polymer Materials
·
2025
·
IF 4.7
Yingqi Wei,Hao Wang,Yaxi Zhu,Guancheng Zhan,Lihuan Zhang,Huichang Gao,Longyang Jin,Ruobing Feng
Peripheral nerve injury frequently occurs alongside vascular injury due to the incorporation of vascular tissue within the nerve bundle. During the repair process of peripheral nerve injuries, the concurrent regeneration of capillaries within the nerve bundles is crucial for facilitating nerve regeneration. However, current studies often overlook the regeneration of blood vessels in nerve bundles when designing nerve repair scaffolds, leading to suboptimal nerve regeneration outcomes. To address this limitation, amino-modified Cu-doped mesoporous bioactive glass (Cu-MBG) was developed as a nanodelivery carrier for miR-29a to construct miR-29a@Cu-MBG nanoparticles, which exhibit dual functionality in promoting nerve regeneration and inducing vascular regeneration. Subsequently, miR-29a@Cu-MBG was incorporated into a CS/GelMA hydrogel to create an engineered multifunctional nerve conduit through the ionic cross-linking of chitosan and the optical cross-linking of GelMA, which demonstrated excellent mechanical properties and biocompatibility. In vitro cell experiments indicated that the sustained release of miR-29a@Cu-MBG from the conduit effectively delivered miR-29a into PC12 cells, leading to the upregulation of nerve regeneration-associated genes (GAP-43 and NF-200) and the outgrowth of neurite. Additionally, Cu-MBG was found to enhance the migration of HUVECs and upregulate genes related to angiogenesis (HIF-α, ANG, eNOS, and KDR), promoting the tube formation of HUVECs. These findings offer a perspective for the design of nerve conduits capable of promoting both nerve and vascular regeneration.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Xiao Yang,Shuting Huang,Dongyun Chen,Shi-hong Dong,Najun Li,Qingfeng Xu,Hua Li,Jianmei Lu
As a means of addressing the growing challenges of environmental pollution and energy scarcity, microbial fuel cells (MFCs) represent a sustainable approach for wastewater treatment and energy generation. In the present study, a catalyst synthesized by compositing Cu-based multilayer nanosheets with hollow fibrous LZU1 (CL/NC) exhibited remarkable adsorptive and catalytic properties. It achieved a power density of 57.29 ± 0.69 W m–3 and maintained 90.05% of its initial power density after the substantial operational duration of 43,200 min. Notably, CL/NC-700 demonstrated an exceptional ability to degrade Rhodamine B, highlighting its significant potential in environmental remediation efforts. Its enhanced catalytic activity can be ascribed to the synergistic impact of N-doping and the hollow-fiber morphology of LZU1, which collectively optimize mass transfer and enrich the catalyst with active sites for the oxygen reduction reaction. Comparatively, CL/NC-700 demonstrated superior stability and efficiency over commercial platinum-based catalyst, underscoring its viability as a scalable alternative for MFC applications and environmental remediation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Haining Hou,Zehao Zhang,Haibo Li
Capacitive deionization (CDI) is a highly efficient desalination technique to obtain the portable water with low energy cost and environmental-friendly. However, the desalination capacity is still challenging. In this work, a Cu@C anode presenting the spherical structure with plenty of 3D diffusion tunnels has been proposed for CDI anode towards the enhanced Cl - removal. Such structure not only provide abundant electroactive sites for adopting salty ions, but also promote the electrosorption kinetics. Aiming to extract Cl - from the stream, the optimized Cu@C // activated carbon CDI device demonstrates the exceptional desalination capacity of 149.14 mg/g at 1.4 V in 529 ppm NaCl solutions as well as the fast desalination rate of 8.32 mg/g/min, which are relatively high as compared to many reported data. Moreover, the mechanism analysis points out that the desalination behavior of Cu@C electrode is dominantly governed by the conversion of Cu 0 and Cu + . Beyond that, the desalination capacity decay upon the long cycles is attributed to the irreversible Cu-Cl bonds.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Mingming Luo,Fang Li,Panpan Dong,Yijun Tan,Ruowei Liu,Longping Xu,Pei Zhao,Zijian Wu
Kanamycin (KANA), a widely used antibiotic associated with foodborne disease, requires accurate monitoring solutions. This study presents a novel ultrasensitive electrochemical aptasensor for KANA quantification using a signal amplification method. The sensing platform was constructed with Cu/Al-MOF@Ti 3 C 2 nanocomposites as the support and incorporated aptamers specifically recognizing KANA. Among them, Cu/Al-MOF provided a high specific surface area for anchoring a large number of aptamers, Ti 3 C 2 was used to enhance the conductivity of the aptasensor, the aptamers have been used for the improvement of the sensitivity of the aptasensor, and the insertion of Cu/Al-MOF into Ti 3 C 2 sheets effectively prevents stacking between Ti 3 C 2 sheets. In the context of KANA, the specific recognition of the aptamer led to a decrease in the electrochemical signal. Under optimal conditions, the logarithm of the electrochemical output signal versus KANA concentration was linear over the range of 10 fM to 100 nM with a limit of detection (LOD) of 0.74 fM. In addition, the aptasensor showed excellent accuracy and high reproducibility and has been successfully employed in actual samples, enabling the detection of a wide range of targets by simply replacing the matching aptamer.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Haifeng Zhang,Ziyi Liu,Zhi Xu,Chunying Teng,Wei Chen,Lanhe Zhang,Jian Zhang
The Fenton-based oxidation process is an effective wastewater treatment approach for degrading organic pollutants. However, it has limitations in terms of pH range and secondary pollution. Cu(II)-mediated Fenton-like oxidation presents a promising alternative for applications. In this work, experimental approaches were integrated with kinetic modeling analysis to understand the production, performance and reaction mechanism of active species during the Cu(II)/H 2 O 2 process. Chemical probe analysis and electron paramagnetic resonance information verified the presence and properties of ·OH and Cu(III) in the Cu(II)/H 2 O 2 process. By using the periodate colorimetric technique, the relationship between reaction conditions and the generation of Cu(III) was further clarified. Together with theoretical analysis, the contribution of ·OH and Cu(III) to the elimination of bisphenol A (BPA) in the Cu(II)/H 2 O 2 process was examined. Quantitative analysis demonstrated that ·OH played a pivotal role under acidic conditions, accounting for 54.06 % and 62.06 % of BPA removal at pH 4 and 6, respectively. However, a dramatic shift occurred under alkaline conditions, where ·OH contributions decreased substantially to·3.35 % and 0.89 % at pH 10 and 12, respectively. The kinetic model for the removal of BPA by Cu(II)/H 2 O 2 process was calculated as V= 0.236·[BPA] 0.173 ·[Cu(II)] 0.619 ·[H 2 O 2 ] 1.556 using one-eighth lifetime method. Furthermore, Cu(III) was found to be more reactive toward the benzene ring than ·OH. This work contributes to our understanding of the Cu(II)-mediated Fenton-like oxidation process, and it could offer a promising new method for treating refractory organic wastewater.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2024
·
IF 4.3
Zhen Li,Xianhui Wang,Da Li,Hongbo Zhang,Bochen Zhang
The Mo 2 C@CNTs/Cu-20wt.%Mo composite materials with outstanding mechanical properties and electrical conductivity were prepared via the combination of mechanical wet-mixing, ball-milling and spark plasma sintering technology. By regulating the morphology and content of Mo 2 C decorated on CNTs, the Mo 2 C nanoparticles are anchored on CNTs and well bonded with the matrix, resulting the good interfacial bonding in the composite material. The Cu-20wt.%Mo composite material reinforced by 0.2wt.%Mo 2 C@CNTs exhibits a yield strength of 342.19 MPa and an ultimate tensile strength of 390.37 MPa, which are respectively increased by 23.13 % and 20.34 % as compared to the Cu-20wt.%Mo. Besides, the electrical conductivity of the 0.2wt.%Mo 2 C@CNTs/Cu-20wt.%Mo composite material is also improved by 6.89 %. Furthermore, the strengthening effect of Mo 2 C@CNTs/Cu-20wt.%Mo composite material can be attributed to the contribution of Mo 2 C nanoparticles, which not only enhance the CNTs load transfer strengthening but also promote the dislocation strengthening and Orowan strengthening.
✓ 已验证
DOI
高影响因子
Materials Today Bio
·
2024
·
IF 8.7
Hui Yang,Sirui Huang,Xinwei Zhu,Yasi Chen,Chunming Xu,Ruohan Li,Pan Bu,Yufan Jiang,Changwei Li,Jie Yang,Zhenyi Chen,Weijie Peng,Lin Liu
Critical-sized bone defects present a formidable challenge in tissue engineering, necessitating innovative approaches that integrate osteogenesis and angiogenesis for effective repair. Inspired by the hierarchical porous structure of natural bone, this study introduces a novel method for the scalable production of ultra-long, copper-doped hydroxyapatite (Cu-HAp) fibers, utilizing the rapid gelation properties of guar gum (GG) under controlled conditions. These fibers serve as foundational units to fabricate three-dimensional porous scaffolds with a biomimetic hierarchical architecture. The scaffolds exhibit a broad pore size distribution (1–500 μm) and abundant nanoporous features, mimicking the native bone extracellular matrix. Physicochemical characterization and in vitro assays demonstrated that the copper doping significantly enhanced osteogenic and angiogenic activities, with optimized concentrations (0.8 % and 1.2 % Cu) facilitating the upregulation of osteogenesis-related genes and proteins, as well as promoting endothelial cell proliferation. In vivo studies further confirmed the scaffolds' efficacy, with the 1.2Cu-HAp group showing a remarkable increase in bone regeneration (bone volume/total volume ratio: 35.7 ± 1.87 %) within the defect site. This research offers a promising strategy for the rapid fabrication of multifunctional scaffolds that not only support bone tissue repair but also actively accelerate the healing process through enhanced vascularization.
✓ 已验证
DOI
PubMed
高影响因子
ACS Catalysis
·
2024
·
IF 11.3
Long Cheng,Rong Wang,Wenzhe Si,Yanxi Deng,Junhua Li,Yue Peng
Cu-based catalysts leveraging Cu+/Cu0 active sites have emerged as pivotal for synthesizing essential hydrocarbons and alcohols in electrochemical CO2 reduction, such as ethylene and ethanol (C2 products). However, the dynamic reduction of Cu+ to Cu0 during electroreduction leads to site instability, resulting in diminished efficiency for CO2 conversion to C2 products. Herein, we introduced Si into CuO by the selective dissolution method, engendering Cu–O–Si units to stabilize the Cu+/Cu0 sites. The catalyst manifested good activity in CO2 electroreduction with an elevated Faradaic efficiency for C2 products reaching 81.9% at −100 mA/cm2. After ten cycles of electrochemical testing, the Cu+/Cu0 sites and performance exhibited no signs of degradation. The Si incorporation significantly improved the hybridization of O 2p and Cu 3d orbitals, thereby reinforcing the Cu–O bonds and stabilizing the Cu+/Cu0 sites, which was critical in promoting C–C coupling via decreasing the energy barriers for *OCCO formation and enhancing C2 product selection. The active Cu+ cations with unsaturated coordination contributed to the reaction stabilization, thereby improving the preservation of Cu2O metastable state.
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2025
·
IF 7.7
Qiule Li,Xianpeng Liu,Yueying Zhang,Xinge Wang,Jing Wang,Bin Wang,Geyu Lu,Fangmeng Liu
Precise detection of hydrogen sulfide (H 2 S), a key spoilage marker in premium foods, is essential for maintaining both flavor and safety. However, conventional sensors often struggle to achieve high sensitivity, stability, and low power consumption simultaneously. Here, we report a mixed-potential type gas sensor based on Cu-MOF sensing electrode, K 2 Fe 4 O 7 solid electrolyte, and Au reference electrode for rapid and non-destructive food freshness evaluation. The sensor achieves an ultra-low detection limit (LOD) below 5 ppb at room temperature via a two-electrode response mechanism, addressing the stringent requirements of premium food quality control. To improve stability, an electrode passivation strategy was introduced to suppress the formation of inactive sulfate deposits, extending repeatability from 22 to 66 cycles (change rate within 10%). Replacing Cu-MOF with CuO, its stability significantly improved after passivation, confirming the strategy’s general applicability. We further developed a portable H 2 S monitoring system capable of real-time freshness tracking, showing a strong correlation with early spoilage. This work demonstrates a generalizable stabilization strategy for mixed-potential type H 2 S sensors and provides a practical, non-destructive platform for freshness grading in premium food supply chains.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 7
·1-12
·
IF 5.3
Gu Yaohong,Li Qiulan,Yang Dezhi,Yang Yaling
A phosphomolybdate nanozymes doped with copper and iron particles (Cu,Fe-PMs) with excellent peroxidase (POD)-like activity was prepared by one-step microwave digestion method. It can oxidize the positively charged substrates such as 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of H₂O₂, resulting in the formation of a blue compound. It is noteworthy that the POD-like activity of Cu,Fe-PMs was significantly boosted upon the incorporation of sodium dehydroacetate (DHA). This was attributed to the formation of complex between the Cu,Fe-PMs and DHA. On the one hand, DHA enhances the affinity of Cu,Fe-PMs for the substrate and exhibits superior catalytic properties. On the other hand, DHA also accelerated the valence state transformations between Fe 3+ /Fe 2+ and Cu + /Cu 2+ , increased catalytic active sites and facilitate the generation of more reactive oxygen species (ROS) such as •OH with strong oxidation. Therefore, the current study successfully established a highly sensitive and reliable colorimetric sensor for detecting the DHA content in foods. The results indicated that the absorbance at 652 nm exhibited a linear relationship with DHA concentration within the range of 0.0017—2.5 μg mL −1 , achieving a minimum limit of detection (LOD) as low as 0.83 ng mL −1 . The sensor was successfully applied to detect DHA in actual samples, with recoveries ranging from 91.59% to 103.35% and a relative standard deviation (RSD) not exceeding 3.64%. This demonstrates the reliable performance and consistent reproducibility of the analytical approach. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子