APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Yijun Fu,Yue Cheng,Qufu Wei,Yahong Zhao,Wei Zhang,Yumin Yang,Dawei Li
Single function of biomass aerogel restricts its further development, multifunctional biomass aerogel is becoming an urgent need. In this work, multifunctional biomass composite aerogel was prepared by co-modifying MXene and Ag nanowires (AgNWs) on bacterial cellulose/chitosan (BC/CH) composite aerogel through a facile method combining physical mixture, lyophilization and electrostatic adsorption. The as-prepared BC/CH/MXene/AgNWs composite aerogel could be applied as health monitoring sensor and photo-thermal antibacterial material. As a sensor, it showed high sensitivity, short response time, and satisfactory cycling stability for health monitoring. Moreover, the composite aerogel was successfully employed to monitor various human body motions including foot movements, elbow movements, wrist movement, respiration, and throat vibration pronunciation. In addition, the composite aerogel displayed excellent photothermal conversion performance, which could be quickly heated to more than 60 °C in 60 s under NIR laser irradiation (808 nm, 0.6 W/cm 2 ). The BC/CH/MXene/AgNWs composite aerogel showed nearly 100% sterilizing effect due to the synergistic antibacterial effect from common antibacterial role of CH/AgNWs and photo-thermal antibacterial role of MXene. The novel aerogel possesses more response characteristics and better antibacterial property than existing biomass aerogels, which may develop potential application prospect in wearable and implantable bioelectronic material for health monitoring.
✓ 已验证
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Wei Zheng,Zequn Yang,Jiefeng Chen,Weizhen He,Ruiyang Qin,Hongxiao Zu,Wenqi Qu,Jianping Yang,Lijian Leng,Hailong Li
A fundamental obstacle that restricts the use of metal selenides for gaseous elemental mercury (Hg 0 ) immobilization is the failure to take both the optimization of intrinsic structure favorable for Hg 0 diffusion and adequate exposure of metal selenide towards Hg 0 into consideration. In this work, a Ti 3 C 2 MXene/Cu 2 Se sorbent for Hg 0 sequestration was synthesized via a Lewis acid etching route combined with room-temperature selenization pathway. During this strategy, copper chloride plays a dual role, i.e., an etching agent for the Ti 3 C 2 MXene synthesis and a precursor for Cu 0 decoration. Cu 2 Se precursors (Cu 0 ) were dispersedly and firmly pre-anchored on the substrate, effectively avoiding the agglomeration and warranting excellent dispersion of Cu 2 Se. Compared with pristine Cu 2 Se, Ti 3 C 2 MXene/Cu 2 Se exhibits advantageous structural characteristics fully boosting Hg 0 diffusion kinetics. Meanwhile, the enhanced dispersion of Cu 2 Se from the prefixation of Cu 0 largely enhances the exposure and utilization of selenide. Consequently, Ti 3 C 2 MXene/Cu 2 Se shows a Hg 0 adsorption capacity of 147.64 mg g −1 , which is much higher than those of Cu 2 Se and most other metal selenides. Impressively, its uptake rate of 688.99 μg g −1 min −1 is the highest record rate in metal selenides. Moreover, Ti 3 C 2 MXene/Cu 2 Se still maintained outstanding Hg 0 adsorption performance under relatively high reaction temperature with the shelter of Ti 3 C 2 MXene. Typical fuel gas situations including coal combustion flue gas, smelting flue gas, natural gas have negligible influences on its Hg 0 adsorption performance, indicating its extensive applicability and flexibility for actual industrial situations. This work also provides valuable hints for the trade-off of structural properties and ligands exposure to design Hg 0 sorbents with satisfactory Hg 0 sequestration performances.
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2018
·Vol. 30
·期 7
·075601
·
IF 3.404
Liang Shi,Chonglei Xu,Daixun Jiang,Xun Sun,Xiaopeng Wang,Qicong Wang,Yelong Zhang,Xiaofei Qu,Fanglin Du
Heterostructured photocatalysts play a significant role in the removal of contaminants by decreasing the recombination of the photo-induced charges. Herein, we presented novel TiO2/C/BiVO4 ternary hybrids employing a 2D layered Ti3C2 MXene precursor, overcoming the lattice mismatching of TiO2/BiVO4 binary heterostructures simultaneously. Raman and XPS analyses proved the strong coupling effects of TiO2, carbon and BiVO4 components, and the heterostructures were identified from high-resolution transmission electron microscopy results. Moreover, the ternary TiO2/C/BiVO4 composites exhibit excellent photocatalytic performance of Rhodamine B degradation, which is about four times higher than pure BiVO4 and twice that of binary TiO2/BiVO4 heterostructures, reaching a reaction constant of 13.7 × 10−3 min−1 under visible-light irradiation (λ > 420 nm). In addition, for the possible mechanism for dye elimination it was proposed that RhB molecule be directly oxidized by photo-induced holes (h+) on the BiVO4 components and superoxide radical ({{{\rm{O}}}_{2}}^{\cdot -}) generated from conduction band electrons of the heterostructures. This work will provide possibilities for developing visible-light responsive nanomaterials for efficient solar utilization.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Yongqian Shi,Chuan Liu,Zaipeng Duan,Bin Yu,Minghua Liu,Pingan Song
The integration of high strength, high toughness, and excellent flame retardancy in polymer materials is highly desirable for their practical applications in the industry. However, existing material design strategies often fail to realize such a performance portfolio because of mutually exclusive mechanisms between strength and toughness, and low flame retardancy efficiency of nanofillers in polymers. Here, we reported the preparation of a multifunctional nanohybrid, Ti 3 C 2 T x @MCA, by engineering the surface of titanium carbide nanosheets (Ti 3 C 2 T x , MXene) with melamine cyanurate (MCA) via hydrogen bonding interactions, and subsequent thermoplastic polyurethane (TPU)/Ti 3 C 2 T x @MCA nanocomposites. The resultant TPU nanocomposite containing 3.0 wt% of Ti 3 C 2 T x @MCA shows a high tensile strength of 61.5 MPa, a toughness as high as 175.4 ± 7.9 MJ m −3 and a high strain at failure of 588%, and 40% reduction in the peak of heat release rate. Such extraordinary mechanical and fire retardant performances are superior to those of its previous counterparts. Interfacial hydrogen bonding in combination with the “labyrinth” effect and catalytic action of 2D Ti 3 C 2 T x nanosheets are responsible for the outstanding mechanical and fire retardancy properties of TPU nanocomposites. This work provides a new paradigm for integral design of high-performance polymeric materials with excellent mechanical and fire-safe performances portfolio.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Yang Jin,Kai Wang,Shaoxiang Li,Jingquan Liu
With the rapid consumption of traditional fossil energy, the utilization of solar energy via photothermal conversion to obtain fresh water from seawater or wastewater should be a promising alternative to solve the shortage of energy resources. At present, evaporators based on diverse photothermal conversion materials have been developed, but most of them are still facing the drawbacks of complicated structure, complex preparation and poor salt resistance, which severely affect their broad practical applications. Multilayer-MXene (mMXene) and polydopamine (PDA) nanoparticles are two kinds of materials with excellent photothermal conversion efficiency. In this study, we loaded these two materials with optimized mass ratio into the thermally insulated and low-cost melamine foam, followed by simple annealing treatment to afford three-dimensional and self-floating carbonized MXene/PDA foam (CMPF) evaporators with high hydrophilicity, unpleasant thermal conductivity, and remarkable light absorbance. The evaporation rate of CMPF, as a result, could attain 1.598 kg m −2 h −1 under 1 sun (1 kW m −2 ) irradiation while the photothermal conversion efficiency is calculated to be 89.8%. In addition, CMPF-2 displays excellent desalination ability, self-desalination ability, good cycle stability and reliable safety performance as revealed by bacterial culture experiment. Combining these advantages, it has been revealed that CMPF-2 possesses certain feasible practical applications in seawater desalination.
✓ 已验证
DOI
高影响因子
Frontiers in Materials
·
2023
·
IF 3.2
Wang Wei,Song Xiangning,Xie Yan,Sheng Xuejia,Zhang Shucai
In recent years, oil spills and organic pollution have caused severe damage to the ecological environment. Therefore, the treatment of oily wastewater has become a serious challenge. Here, with the help of melamine foams as a substrate, MXene nano-rough structures were built, and cetyltrimethoxysilane was grafted onto their surfaces to create an oil-absorbing material that is both user-friendly and effective at oil-water separation. Due to the nano structures of MXene were constructed and the long-chain silanes were modified on the foam surface, the material became superhydrophobic. In addition to being able to selectively absorb oils from an oil/water mixture (including emulsified oils) up to 111 times its weight, the modified foam was found to have a water contact angle of 157 which could selectively absorb oil but not water. Furthermore, it demonstrated sustained hydrophobicity and lipophilicity after experiencing strong acid/alkali or prolonged high-temperature treatment, allowing for various scenarios where oil-water separation can be used in severe settings without compromising performance.
✓ 已验证
DOI
高影响因子
2D Materials
·
2022
·Vol. 10
·期 1
·014004
·
IF 6.861
Guanshun Xie,Yisong Zhu,Changqiang Yu,Xiuqiang Xie,Nan Zhang
Steering photogenerated electron flow to the effective reactive sites is ideal for photocatalytic H2 evolution. Herein, as a proof-of-concept, NiS is coupled with a typical Schottky heterojunction of Ti3C2Tx MXene@In2S3 through the photodepotition method towards improving the photocatalytic H2 evolution performance. In addition to the Schottky effect-mediated electron transfer in Ti3C2Tx MXene@In2S3 heterojunctions, p–n junctions form between In2S3 and NiS to extract photoinduced electrons, which is found to cooperate with the role of effective H2 evolution reactive sites. The synergistic dual functions of NiS cooperate with Ti3C2Tx MXene promote multichannel electron transfer in Ti3C2Tx MXene@In2S3-NiS hybrids to improve the photocatalytic hydrogen evolution reaction (HER) efficiency by 41 times compared to the bare In2S3. These results enlighten the engineering of the spatial transfer of photoinduced electrons to the reactive sites toward boosting the efficiency of photocatalytic HER.
✓ 已验证
DOI
高影响因子
BIOMACROMOLECULES
·
2021
·
IF 6.988
Dongning Liu,Yujiao Gao,Yiheng Song,Hengfeng Zhu,Linjun Zhang,Yuanyuan Xie,Hui Shi,Zhuqun Shi,Quanling Yang,Chuanxi Xiong
Electronic skin has aroused extensive research interest due to high similarity with human skin. Realizing a multifunctional electronic skin that is highly consistent with skin functions and endowed with more other functions is now a more urgent need and important challenge. Here, we use 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibril (TOCN) dispersion and highly conductive Ti3C2TX dispersion to prepare TOCN/Ti3C2TX composite film through vacuum-assisted filtration. The obtained composite film imitating the nacre-like lamellar structure of natural shells has good mechanical properties (124.6 MPa of tensile strength). Meanwhile, the composite film also showed excellent electromagnetic shielding performance (36 dB), biocompatibility, and antibacterial properties. In addition, the piezoresistive sensor assembled from the composite film exhibited a high sensitivity (11.6 kPa–1), fast response and recovery time (≤10 ms), ultralow monitoring limit (0.2 Pa), and long-term stability (>10 000 cycles). It also could detect human daily activities such as finger bent, chewing, and so on.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Dan-Dan Shao,Qingxiao Zhang,Long Wang,Zhen-Yuan Wang,Yi-Xuan Jing,Xue-Li Cao,Fang Zhang,Shi-Peng Sun
Highly permeable two-dimensional membranes are desirable for efficient molecular sieving and resource recovery through confined-space mass transfer via nanosheets restacking. However, their application requires addressing the swelling issue of 2D nanosheets in solvents, weak interfacial interaction between the adjacent nanosheets , and performance declination caused by over-restacking. This study reports an interfacial adhesion enhanced MXene membrane via pillaring carbon nanotubes (CNTs) combined with an upgraded post-treatment method consisting of fan-drying and air-drying. The combined drying method induces the nanosheets stacking to a partial-dehydration membrane structure, granting the neat MXene membrane with stable anti-swelling property. The strong π-π interactions and van der Waals forces of CNTs impel the close-fitting of MXene nanosheets for enhanced anti-swelling property and interfacial bonding force. The CNTs with confined-space mass transfer effect and high mechanical strength elevate the pillared MXene/CNTs-CTAB membrane performance for 5 times (the pure water permeance was enhanced from 20.09 L·m -2 ·h -1 ·bar -1 to 100.89 L·m -2 ·h -1 ·bar -1 ), endowing the membrane with high anti-pressure property. The membrane with precise molecular sieving property exhibits great potential in resource recovery and energy-saving.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Shuang Xiong,Tao He,Tao Zhou,Dalei Wang,Yueyue Wang,Chaoqing Dai,Wei Liu
Pesticides are often overused in production and life, which harms the environment and human health. However, the current tools for detecting pesticides are not effective enough due to lower flexibility and stability. With regards to this, we synthesized a flexible substrate of PDMS modified by MXene (Ti 3 C 2 Tx)/Ag. The MXene-noble metal composite substrate can detect 4-mercaptobenzoic acid (4MBA) at a low concentration of 1.0 × 10 −11 M. Furthermore, MXene can inhibit the oxidation of Ag nanoparticles (NPs) and efficiently localize the molecules to be tested within the hot spots. In particular, the flexibility of the substrate enables the detection of trace amounts of thiabendazole (TBZ) by collecting samples directly from uneven surfaces such as fruits and vegetables. The substrate is also capable of detecting a mixture of TBZ and 4MBA simultaneously. Using intrinsic Raman peak of PDMS as the internal standard can eliminate the influence of environmental factors on the detection results, which makes the detection results more quantitative. The resultant noble metal-semiconductor substrates show great potential applications in food safety and environmental monitoring fields.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Hui Dong,Jingchao Sun,Xingmin Liu,Xiaodan Jiang,Shaowei Lu
The universal application of wearable strain sensors in various situations for human-activity monitoring is considerably limited by the contradiction between high sensitivity and broad working range. There still remains a huge challenge to design sensors featuring simultaneous broad working range and high sensitivity. Herein, a typical bilayer-conductive structure Ti3C2Tx MXene/carbon nanotubes (CNTs)/thermoplastic polyurethane (TPU) composite film was developed by a simple and scalable vacuum filtration process utilizing a porous electrospun thermoplastic polyurethane (TPU) mat as a skeleton. The MXene/CNTs/TPU strain sensor is composed of two parts: a brittle densely stacked MXene upper lamella and a flexible MXene/CNT-decorated fibrous network lower layer. Benefiting from the synergetic effect of the two parts along with hydrogen-bonding interactions between the porous TPU fiber mat and MXene sheets, the MXene/CNTs/TPU strain sensor possesses both a broad working range (up to 330%) and high sensitivity (maximum gauge factor of 2911) as well as superb long-term durability (2600 cycles under the strain of 50%). Finally, the sensor can be successfully employed for human movement monitoring, from tiny facial expressions, respiration, and pulse beat to large-scale finger and elbow bending, demonstrating a promising and attractive application for wearable devices and human–machine interaction.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Minying Wu,Qian Zhang,Yuanyuan Fang,Chao Deng,Fangzhou Zhou,Yi Zhang,Xingdong Wang,Yi Tang,Yajun Wang
Two-dimensional (2D) nanoreactors with cascade catalytic activity for glucose oxidation and hydrogen peroxide decomposition are prepared via immobilizing glucose oxidase (GOx) on Ti 3 C 2 MXene nanosheets. Amino-rich polypeptide, poly- l -lysine (PLL), is applied to modify the ultra-thin Ti 3 C 2 MXene nanosheets with a compatible surface for GOx immobilization. The PLL-modified Ti 3 C 2 nanosheets possess a positively charged surface and show an excellent GOx loading capacity as high as 50 wt% of the Ti 3 C 2 nanosheets. The physically adsorbed enzymes are then cross-linked with the amine groups in the PLL chains to form a robust GOx-PLL network covered on the MXene nanosheets. The GOx-conjugated Ti 3 C 2 -PLL (Ti 3 C 2 -PLL-GOx) nanosheets showed superior enzymatic activities than the activities of GOx immobilized on an inert porous silica substrate, largely because that the Ti 3 C 2 nanosheets can catalyze the decomposition of the toxic intermediate H 2 O 2 generated from the glucose oxidation. Given the excellent electrical conductivity of Ti 3 C 2 MXene, the Ti 3 C 2 -PLL-GOx nanosheets are further deposited on glassy carbon electrode to construct a high-performance biosensor with a glucose detection limit of 2.6 μM.
✓ 已验证
DOI
高影响因子